4-valcové hydraulické stroje na valcovanie plechov

KK-Industries CY4R-HHS 190-20/8.0

Stav: nový, Pre-bending: 13.0 mm Sheet length: 3100 mm Sheet thickness: 16.0 mm Total power requirement: 17.5 kW Approximate weight: 11.6 t Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar Bending capacity: 16.0 mm » at 3x top roll diameter Pre-bending: 13.0 mm » at 1.5x top roll diameter Top roll diameter: 300 mm Bottom roll diameter: 270 mm Side roll diameter: 210 mm Max. opening: 50 mm Working height: 1140 mm • Fully hydraulic drive of top and bottom rolls via planetary gearbox • Digital display for side roll positions • Hydraulic drop end bearing • Cone bending device • Hardened rolls • Hydraulic side roll adjustment synchronized via PLC • Hydraulic bottom roll adjustment via torsion shaft Gsdpfed Auacox Ahujbg • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Mobile control panel • Operating instructions in GERMAN and ENGLISH • Machine and equipment in accordance with CE regulations Important points for cone rolling: • Maximum sheet thickness is 50% of the rated capacity • The cone length must be a maximum of 30% or more than 60% of the roll length • Hardened rolls are recommended

Stav: použitý, Pracovná dĺžka: 5 500 mm Hrúbka plechu: 13 mm Technické parametre: * 3 PRACOVNÉ VALCE * PRIEMER HORNÉHO VALCA Φ-500 * PRIEMER BOČNÝCH VALCOV Φ-300 (KAŽDÝ) * HYDRAULICKÉ PODPERY VĽAVO-VPRAVO * HYDRAULICKÝ ZDVIŽNÝ STOŽIAR Gbjde Dvliepfx Ahueg * HYDRAULICKÉ PREDOHÝBANIE

Stav: nový, Bending (pre-bending): 6.0 mm Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4,88 x 1,16 x 1,18 m Gjdjd Ab H Hepfx Ahuebg Image similar Bending capacity: 8.0 mm » at 3x top roll diameter Pre-bending: 6.0 mm » at 1.5x top roll diameter Top roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of top and lower roll via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion bar • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control console • Operating manual in GERMAN and ENGLISH • Machine and equipment according to CE regulations Catalog see following link: Important points for conical bending: • The max. sheet thickness is 50% of the nominal capacity • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Rok výroby: 2024, Stav: nový, Bending capacity: 6 mm Pre-bending: 5 mm Bending capacity: 6 mm Pre-bending: 5 mm Bending length: 2,030 mm Roll diameter: 170 mm Motor power: 4 kW Length: 3,600 mm Width: 1,020 mm Height: 1,120 mm Weight: 2,400 kg The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Additional machines are ready for demonstration at our facility in Staufenberg. Further information is available upon request. Gedpfjftdh Iox Ahujbg

Stav: dobrý (použitý), Technical Data: Working length: 2100 mm Maximum bending capacity: 10.0 mm Pre-bending capacity: 8.0 mm Gbodpfx Ahewchn Ueujg Top roller diameter: 200 mm Lower roller diameter: 180 mm Number of driven rollers: 3 Hydraulic drop-end bearing Cone bending device Extended rollers for profile bending Control panel with digital display Motor power: 5.5 kW CE mark Dimensions (L x W x H): approx. 3100 x 1150 x 1250 mm Weight: approx. 4 tonnes Accessories: Several sets of rolls for tube and profile bending The seller is not liable for typing or data transmission errors. The machine is in a condition consistent with its age regarding appearance, technology, and wear; used machines are sold without any warranty.

Stav: nový, Ostas 3-roll plate bending machine SMR-S 2070 x 190 Technical Specifications: Special equipment included in the price: - Motorised adjustment of the lower rolls - Hardened rollers - Motorised adjustment of the rear roll - Digital display Sheet width: 2070 mm Max. sheet thickness: 7.0 mm Pre-bending thickness: 6.0 mm Roll length: 2070 mm Smallest bending diameter: 285 mm Gbjdpfxog Nz T Ie Ahuog Roller diameter: 190 mm Weight: 3480 kg Dimensions (L x W x H): 3750 x 920 x 1260 mm Motor: 4 kW Features: - Electrically driven upper and lower rolls - Upper roll can be swung out - Cone bending device - Asymmetrical roll arrangement - Self-braking main motor - Separate control and operating panel - Safety wire, CE mark

Stav: takmer ako nový (použitý), Dvojstĺpový hydraulický lis Lisovacia sila: 200 t Horný zdvih: 500 mm Dolný zdvih: 200 mm Celkové rozmery: 1800x2200x3700 mm Výkon: 10 PS Hmotnosť: 8,4 t Gbodpfjghl N Uex Ahueg

Stav: nový, Rok výroby: 2025, - Kapacita 700 x 2 mm - Kónické valcovanie - Odnímateľný horný valec - Ovládanie nožným pedálom - Núdzové zastavenie Gbedpsihv Hpefx Ahuog - Dokumentácia - 400V

Stav: nový, Ohýbanie: 10,0 mm Godpfod Ab H Ijx Ahusbg Dĺžka plechu: 2550 mm Hrúbka plechu: 13,0 mm Celkový príkon: 15,0 kW Hmotnosť cca: 10,6 t Rozmery (DxŠxV): 4,76x1,66x1,59 m Obrázok podobný Ohýbací výkon: 13,0 mm » pri 3x priemere horného valca Počiatočné ohýbanie: 10,0 mm » pri 1,5x priemere horného valca Priemer horného valca: 270 mm Priemer spodného valca: 250 mm Priemer bočného valca: 220 mm max. otvorenie: 50 mm Pracovná výška: 1 155 mm • plne hydraulický pohon horného a spodného valca cez planétovú prevodovku • digitálny ukazovateľ polohy bočných valcov • hydraulické výklopné ložisko • plynulo nastaviteľná rýchlosť valcovania • zariadenie na kužeľové ohýbanie • kalené valce • hydraulické nastavovanie bočných valcov synchronizované cez PLC • hydraulické nastavovanie spodného valca cez torznú hriadeľ • tlakovo nastaviteľný spodný valec • elektrická a hydraulická ochrana proti preťaženiu • mobilný ovládací pult • stroj a vybavenie podľa smerníc CE Katalóg nájdete na nasledujúcom odkaze:   Dôležité body pri kužeľovom ohýbaní: • max. hrúbka plechu je 50 % menovitého výkonu • dĺžka kužeľa môže byť max. 30 % alebo musí byť viac ako 60 % dĺžky valca • kalené valce sú odporúčané

Stav: nový, Sheet width 1290 mm Gedpfjvzhgpjx Ahujbg Sheet thickness 5 mm Pre-bending yes Roller diameter 120 mm Rolling speed 1 - 6 m/min Total connected load 1.1 kW Machine weight approx. 825 kg Three-roll plate bending machine with asymmetric roll arrangement, enabling pre-bending. New machine equipped with emergency stop wire, brake motor, foot-operated reversing switch, cambered rolls, handwheel adjustment of the lower and bending rolls via worm gear, drive of the top and lower rolls via worm gear motor, infinitely variable rolling speed via inverter, and swing-out top roll. Swedish quality product. This new machine is available in the following additional sizes: Working length from 1040 to 2540 mm, Max. sheet thickness (400 N/mm²) from 1 to 6.5 mm. Optional equipment includes, among others, conical bending device (image 2), digital display (image 4), motorized infeed (image 5) with remote control (image 3), and hardened rolls. Accessory prices + VAT: + Hardened and ground rolls = EUR 2,650 + Digital display per axis = EUR 1,050 + Conical bending device with diagonal adjustment of bending roll, sliding shoe, and handwheel with display = EUR 1,500 + Motorized infeed roll = EUR 3,550 + Motorized lower roll infeed = EUR 3,550 STOCKING DEALER WITH 1,600 m² SHOWROOM.