Posilnenie doska

KRUPS A2-3

Stav: použitý, Rok výroby: 1988, Plate width 2000 mm Plate depth 3500 mm Plate height 270 mm Weight 5.5 t +++++ Please note that the machine is dismantled and ready for loading. For this reason, a demonstration under power or the production of a video is not possible. Gbodpfx Afeiiii Ss Eji Furthermore, our listing contains the most informative photos of the best possible quality. Unfortunately, sending additional images is not possible. +++++

Stav: dobrý (použitý), Rok výroby: 2009, Funkcionalita: plne funkčný, Hmotnosť 4950 kg, celková hmotnosť 12000 kg Gbodpfswpmckjx Af Esi 5,5 kW

Stav: nový, Cutting capacity at 90 degrees: round 510 mm Cutting capacity at 90 degrees: square 450 mm Cutting capacity at 90 degrees: rectangular 650x450 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight approx. 2.1 t Required space approx. 1.9 x 2.87 x 1.3 m SPECIAL PRICE!!! 2-column double mitre bandsaw K-tech DG 62/45 HA-I - 2-column mitre saw - Robust yet easy to operate - Material height sensor (automatic cut start detection) - Smooth operation due to angled cutting, feed regulator + cutting pressure regulator - Heavy-duty material infeed roller Gsdpfx Afod Iipmj Ejbi - Removable chip tray (cleaning/disinfection) - Energy-efficient and low vibration due to angled cutting - Ergonomic, secure, and free-standing control panel - Frequency-controlled saw drive 15–100 m/min - Hydraulic cutting pressure control valve - Hydraulic control of saw frame and vice - LEDs for monitoring all safety functions - Large-dimensioned drive wheels (520 mm) each - Easy-to-read mitre adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid feed down to material start, or cut directly for series cuts 4. Switch off saw blade 5. Raise frame just above material 6. Vice opens

Stav: nový, pohotovostná hmotnosť: 520 kg, maximálna hmotnosť nákladu: 2 180 kg, celková hmotnosť: 2 700 kg, dĺžka ložného priestoru: 4 050 mm, šírka ložného priestoru: 2 000 mm, veľkosť pneumatiky: 185/60R12, Autotransportér od výrobcu ANSSEMS, model MSX2700 405x200 BASIC. V štandardnej výbave má autotransportér Anssems drevenú podlahu, vonkajšie upevňovacie oká na ráme, zasúvateľné hliníkové najazdové rampy pod ložnou plochou, nízky podvozok, robustný zváraný oceľový rám, oporné koliesko a V-oje. Gbsdpferxu Uwsx Af Eei Príslušenstvo k autotransportným prívesom Anssems, ako sú vysoká plachta, nadstavbové bočnice, zarážky kolies, sada zadných opôr, úložný box na náradie, upínacie popruhy na autá a zabezpečenie proti krádeži, máme tiež v ponuke.

Stav: generálne opravený (použitý), Rok výroby: 2026, Funkcionalita: plne funkčný, otvor vretena: 120 mm, sústružnícky priemer: 1 550 mm, sústružnícky priemer nad lôžkom suportu: 1 550 mm, priemer sústruženia nad horným suportom: 1 220 mm, dĺžka sústruženia: 6 000 mm, celková dĺžka: 8 500 mm, celková šírka: 1 600 mm, celková výška: 1 600 mm, hmotnosť obrobku (max.): 15 000 kg, držiak vretena: MK 6, The PORĘBA TR-155B2/6M universal lathe has been comprehensively rebuilt and modernized by us. It features technical specifications consistent with the technical and operational documentation of a new machine, complies with the technical acceptance criteria of WOT and Polish standards, and also fulfills EU requirements. The machine is supplied with a full 12-month warranty covering spare parts and electrical components. Availability: General overhaul on order, lead time 3.5 months from order confirmation. Technical data: - Distance between centers / turning length: 6,000 mm Gbsdpfxev Ab Dqj Af Esi - Swing over bed: 1,550 mm - Swing over cross slide: 1,220 mm - Swing in gap: 1,880 mm - Spindle bore diameter: 120 mm - Max. workpiece weight between centers: 9,000 kg - Max. workpiece weight between centers + 1 steady rest: 12,000 kg - Max. workpiece weight between centers + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st / 2nd gear) - Overall dimensions: Total length: 8,500 mm Width: 2,130 mm Height: 1,550 mm - Total weight: 14,100 kg Standard equipment: Tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and versions - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change toolpost - Full-length rear protection guard - Inverter incl. soft-start function and potentiometer for stepless speed control

Stav: použitý, Clamping plate - Table of a surface planer - Table width / Clamping width: 1845 mm Table length / Clamping length: 5505 mm 7 longitudinal T-slots for T-slot nuts: M30 Gedpfx Asbn Amfsf Esbi Distance between T-slots: 263 mm Total length: 6230 mm Overall plate height: 350 mm Weight: 11 t

Stav: nový, Load capacity: 40,000 kg Length: 8,000 mm Width: 3,000 mm Height: 900 mm Rear axle: steerable Front axle: steerable Tyre dimensions: 540 / 300 twin tires (mm) Dimensions L x W x H: 9.9 x 3.0 x 0.9 m Heavy-duty trailer equipped with: - Double steering - Small turning radius - Tip-proof due to steering angle limiter - Very robust construction, resulting in low maintenance - Removable drawbar - Impregnated wooden deck - Standard paint finish changes; RAL colour of your choice upon request Photos show a 30t version. Different load capacities and dimensions required? Please contact us. Gbedpsfrzwfofx Af Esi

Stav: veľmi dobrý (použitý), Motor-driven NC rotary table Stepless rotary table (indexing increments: 0.001°) Attached pallet station: pallet changer table (2 pallets) Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Total height: 660 mm Centering bore: 100 H6 mm T-slots: 7 pcs Slot size: 22 H7 mm Slot spacing: 160 mm Position feedback via rotary encoder: ROD 250. Condition: Very good (used) Optionally available with machine base (travel = 2000 mm) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is on tool milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls, and CNC control upgrades. Services: Gbjdpfx Ajfk R Tdef Esi - Used machines - Spare parts - Customer service - Machine maintenance - Machine overhauls - CNC control modernization

Stav: dielensky repasované (použité), Rok výroby: 2007, prevádzkové hodiny: 22 605 h, Funkcionalita: plne funkčný, lisovacia sila: 100 t, šírka plniaceho otvoru: 1 100 mm, dĺžka plniaceho otvoru: 1 600 mm, šírka balíka: 1 100 mm, výška balíka: 1 100 mm, hmotnosť balíka: 1 400 kg, vstupný prúd: 238 A, celková hmotnosť: 36 000 kg, kapacita olejovej nádrže: 1 300 l, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data - Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed chute dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connection rating: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk densities: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank volume: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions, baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Gedpfovf E Avex Af Eobi Machine weight (baler only): approx. 36 t Notes: The baler has been partially overhauled, serviced in our workshop, tested upon completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works were carried out: - Derusting and partial repainting of the baler - Hydraulic oil tank drained, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press lid cylinders, and press channel cylinder disassembled, inspected, honed, all seal kits renewed, and final pressure test performed - Pre-press lid with bearings and bearing housings dismantled. 1st and 3rd arc segments removed and newly welded - Both bearings of the pre-press lid shaft replaced - Upper material deflector on pre-press lid frame replaced - Press ram dismantled, checked, and both front rollers renewed - Material deflector and wear profiles on sides and bottom of press ram removed and newly welded - Horizontal and vertical needle and tying units dismantled, checked, plastic slide plates, driller shaft bearings, and wire guide pulleys in the needle heads replaced - Both brass slide rails on left and right cover of the press ram replaced - Both wire deflection units with bale retention clamps completely renewed - Wire inserting unit including hydraulic cylinder below needle guides completely renewed - Wire inlet grooves on floor and side walls of press channel welded and smoothed - General maintenance and service work carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored No liability is assumed for the technical data or possible mistakes.

Rok výroby: 1999, stav: použitý, NOSNOSŤ 2000 kg VÝŠKA 4,7 m a 5 m Gbsdjwa I A Tepfx Af Eji DĹŽKA RAMENA 3,2 m 2 KUSY