Obojstranná rámová brúska

Löwer DSM 300

Stav: použitý, Number of sanding units: 4 pcs. Sanding width: 190 mm Maximum sanding height: 180 mm Control: yes Weight: 3300 kg Dimensions (L/W/H): 2600x920x1890 mm Extraction port diameter: 2x180, 2x120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sander + disk unit from above/below Manufacturer's description: ----- Double-sided four-belt single-wood sanding machine for sanding solid wood such as window frames, etc. Highly robust premium design with innovative details. Suitable for continuous heavy-duty use, even with high material removal rates. - Successive sanding units for pre-sanding, fine sanding, and finish sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see special equipment below) - Direct-driven sanding rollers for slip-free power transmission - Maintenance- and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional accuracy - External cooling of the sanding zones for cooler sanding and longer belt service life - Forced pneumatic-controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Fine dust extraction at the tension rollers - Integrated brushing and finishing unit with large sanding dust extraction - Motorized sanding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts, dust and dirt protected - Adjustment of material removal on the underside via precision threaded spindle with scale ring (resolution 0.1mm) - Sanding belt tension via pneumatic cylinder with constant tension force - Quick sanding belt changes with pneumatic belt relaxation in seconds - Possibility to adjust belt tracking during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, slip- and adhesion-proof transport belts over heavy cast iron tables with finely planed surfaces and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and even workpiece transport - Feed gear motor with stepless speed adjustment 4-20 m/min - All motors electrically protected - Ergonomically arranged controls Nwedpovu Hgbefx Agwep - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2-180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4-20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with soft disc 2740 mm): 2600 mm - Length with control panel (with soft disc 3035 mm): 2985 mm - Width: 880 mm - Height: 1910 mm - Weight approx. 3300 kg - Operating voltage: 400 Volt, 50 Hz, 3P - CE-certified Equipped with the following options: - 4-belt sanding belt air blast directly via nozzles at the radii ...

Stav: pripravené na použitie (použité), Rok výroby: 2018, Hlavný pohon Výkon motora vretena: 11 kW Nwjdpew R E Imofx Agwop Táto pásová brúska SCM DMC sd60 bola vyrobená v roku 2018. Má pracovnú šírku 1 100 mm a spracováva materiál s výškou od 4 do 170 mm. Je vybavená hlavným motorom s výkonom 15 kW a ponúka posuvné rýchlosti 4,5/9 m/min. Ďalšie vybavenie zahŕňa kalibračný valec s gumovým povrchom, brúsny valec, tvrdú brúsiacu pätku a elektronické ovládanie na presnú prevádzku. Zvýšte svoju výrobu kúpou tejto pásovej brúsky SCM DMC sd60. Kontaktujte nás pre viac informácií. Typy použitia Brúsenie

Stav: dobrý (použitý), Rok výroby: 1992, Single-piece wood sanding machine Sanding from above and below Nwodpfx Aowyda Ujgwjp Electric height adjustment with digital display Steplessly adjustable feed speed Star-delta start Pneumatic belt tensioning Main switch Sanding belt oscillation Finishing brushing unit above and below, manual height adjustment Working width: 190 mm Working height: 4 – 150 mm Minimum workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 – 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller table L = 1600 mm, non-driven Note on used machines: • Errors in technical specifications and prior sale excepted. • Prices stated are ex location, loaded free of charge! • The machines have been cleaned and function tested. • All machines are purchased as inspected, with no claim to warranty. The buyer is free to inspect the machines at the site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Stav: použitý, Pracovná dĺžka 3600 mm Pracovná šírka 1500 mm Pracovná výška cca 900 mm WEINIG spätný dopravný systém RF15 Použiteľné za omietacou, hobľovacou alebo frézovacou strojom s maximálnou posuvnou rýchlosťou cca 22 m/min. Technický popis: Nwsdsxpn Tnepfx Agwop Dĺžka obrobku: 250 - 3 600 mm Šírka obrobku: 30-230 mm Pozdĺžno-priečne-pozdĺžne dopravníky s dvomi integrovanými, poháňanými valčekovými dráhami: Priečna dopravná dráha: 1 500 mm Konštantná dopravná rýchlosť: 30 m/min Dĺžka valčekovej dráhy: 2 200 mm Spätná valčeková dráha (nepoháňaná) k obsluhe (Technické údaje podľa výrobcu - bez záruky!)

Rok výroby: 2008, Stav: dobrý (použitý), Funkcionalita: plne funkčný, číslo stroja/vozidla: 10999, OPIS Dvostrana brusilica / brusilni stroj za gornje i donje brušenje Proizvođač: Löwer Model: DSM 3000 sa povratom obratka Bthgq0Ygu0 Radna širina: 290 mm Debljina brušenja: 2-200 mm Minimalna dužina obratka: cca 320 mm Oprema: 1x brusna jedinica odozgo, 7,5 kW 1x jedinica za četkanje odozgo, 0,37 kW 1x brusna jedinica odozdo, 7,5 kW 1x jedinica za četkanje odozdo, 0,37 kW Dimenzije brusne trake: 300 x 1800 mm Električno podešavanje visine, 0,37 kW Podesiv automatski transport materijala, 6/11/16 m/min Nwjdpfxjv Dfp Ho Agwop Pritisak komprimiranog zraka: 6-8 bara Dimenzije (približno): 2700 x 1100 x 1900 mm Težina (približno): 1600 kg

Stav: nový, Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 180 mm LÖWER DoubleSander Solid DSM 2004 ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood such as window profiles, etc. Extremely robust premium design with innovative features. Suitable for continuous heavy-duty use, even with higher material removal rates. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finish sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubber-coated roller and pad 3. Finishing unit with fiber brush - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding pads with excellent thermal conductivity and precision dimensional stability - External cooling of sanding zones for cooler sanding performance and longer belt life - Forced, pneumatically controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Extraction system for airborne dust at the tension rollers - Integrated brushing and finishing device with large dust extraction system - Motorized thickness adjustment via precision leadscrews and large linear ball bearing sets mounted on hardened and ground precision shafts with dust/dirt protection - Removal adjustment at the lower unit via precision leadscrew with scale ring indicator (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinder with constant tension pressure - Quick sanding belt change with pneumatic belt release within seconds - Adjustable belt tracking during belt change - Electropneumatic compressed air monitoring Nwjdpfxevnv Tqs Agwop - Infeed protection via contact roller for overdimensioned workpieces - Workpiece feed via calibrated, slip-resistant and adhesive feed belts over heavy cast iron tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece feed - Feed gear motor with infinitely variable speed 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (resolution 0.1 mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm each, 0.37 kW - Extraction nozzle: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with soft disc 2,740 mm): 2,600 mm - Length with control panel (with soft disc 3,035 mm): 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 Volt, 50 Hz, 3-phase - CE compliant model ----- Price for the above-mentioned machine on request! ----- Optional accessories at extra cost: Workpiece air blow-off - Arranged via jets above and below at the machine outfeed, pneumatically controlled Sanding belt air blow-off 4-belt - Jets arranged directly at the radii of the tension rollers inside the extraction, timer-controlled on/off respectively 5...

Stav: použitý, Number of sanding units: 2 pcs. Sanding width: 190 mm Sanding height max.: 4–180 mm HESS - GLORIA 2-BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer’s description: ----- Compact design engineered according to modern standards. Quiet and vibration-free operation due to a rigid, stable machine frame and special insulation. Safety features in line with EC Machinery Directive, certified as "dust tested". Offset sanding units with large pressure rollers for effective heat dissipation and stable belt tracking. Sanding units feature forced belt oscillation. Two-point sanding dust extraction directly at the sanding drum. Fine dust extraction at the large pressure rollers. Integrated sanding belt blower system for extended belt service life. Integrated brushing and finishing device, adjustable via threaded spindle, with large dust extraction system. Motorized thickness adjustment of the entire upper unit via precision-threaded spindles and linear ball bearings on hardened and ground precision shafts with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and sanding pad are optimally balanced to belt load. Hardened and ground sanding drums. Maintenance-free and wear-resistant oxide ceramic sanding shoes (DBGM) providing excellent sliding properties, good heat dissipation, and high dimensional stability. Belt tensioning via pneumatic cylinder. Belt change facilitated by pneumatically controlled belt relaxation. Adjustable belt tracking during belt replacement. Electropneumatic pressure monitoring for compressed air supply with optical fault display. Automatic machine stop in case of belt breakage and with infeed guard integrated with wood thickness detection. Visual indicators at the control panel. Infeed device and proven, calibrated, slip- and grip-resistant transport belts on precision-ground tables and spring-loaded pressure rollers. Cardan shaft drive for consistent wood feed. Infinitely adjustable feed speed. Chip removal adjustment at the bottom via precision threaded spindle with scale ring (resolution 0.1 mm). Ergonomic layout of operating and adjustment elements at the front: sanding and brushing unit top, sanding and brushing unit bottom, workpiece transport, sanding thickness adjustment, operation, and warning indicator. Control and operating panel integrated in the machine frame with lockable main switch. All motors are electrically protected against overload. Technical data: ----- Sanding belt speed: 24 m/sec Sanding width: 190 mm Sanding thickness: 4–180 mm Shortest workpiece length: 300 mm Feed speed: infinitely adjustable 5–25 m/min Sanding belt dimensions: 200 mm width x 1600 mm length Nwedsv D Rg Dspfx Agwop Electrical connection: 400 V, 3/N PE, 50 Hz Sanding units: 2 x 4 kW Feed drive: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000–2500 m³/h at 20–25 m/sec Extraction port: 2 x 160 mm diameter, top-mounted in the machine frame External dimensions: length: 1600 mm ...

Stav: pripravené na použitie (použité), Technické charakteristiky Liatinový rám Priemer masívneho zotrvačníka: 930 mm Max. výška rezu: 550 mm Max. šírka rezu: 910 mm Rozmery pílového pásu: 6580 až 6670 x 90 x 0,9 mm Vedenie pílového pásu Rozmery liatinového stola: 860 x 1100 mm Nwsdpfxjupbn So Agwjp Náklon stola: 0 až 20 stupňov Motor: 11 kW (15 k) Robustný, uzatvorený stroj 2 odsávacie hrdlá, priemer: 140 mm Oceľový zubový podávač Elektrické parametre a pohony Napätie: 400 V Pripojenie: Trojfázové Výkon: 12 kW Motor: 15 k Celkové rozmery Dĺžka: 1880 mm Výška: 2860 mm Hmotnosť: 990 kg

Stav: použitý, Výbeh – Automatizácia, spätný dopravný systém Weinig Typ RF15 na automatické pufrovanie a nepretržitú spätnú dopravu obrobku k obsluhe. Dĺžka obrobku: 250 – 3 500 mm Šírka obrobku: 30 – 230 mm Posuv: max. 22 m/min Nwsdpfx Agsw Uidajwop

Stav: nový, Number of sanding units: 2 pcs Sanding width: 190 mm Max. sanding height: 2–180 mm LÖWER Double-Sided Sander DSM 2000 ----- Double-sided through-feed sander for sanding solid wood such as window scantlings, etc. Robust top-quality design with long cast iron tables, brush and finishing unit, and feed conveyor. Suitable for heavy-duty, continuous operation, even with large material removal rates. - Offset arrangement of sanding and finishing units above and below - Direct-drive, rubber-coated sanding rollers for slip-free power transmission - Combination sanding via roller and pad for high stock removal with simultaneously flat contact area - Maintenance-free and wear-free CERMET-coated sanding pads with excellent thermal conductivity and absolute dimensional stability - External cooling of the sanding zones for a cooler grinding process and longer abrasive belt service life - Forced pneumatically controlled sanding belt oscillation - Effective extraction of sanding dust directly at the sanding rollers, airborne dust extraction at tensioning rollers - Integrated brush and finishing unit with large dust extraction capacity - Motorised sanding thickness adjustment via precision trapezoidal lead screws and oversized linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustable removal setting on lower unit via precision spindle, with measurement display via scale ring (resolution 0.1 mm) - Sanding belt tensioning by pneumatic cylinder at constant pressure - Quick sanding belt change with pneumatic release within seconds - Adjustable sanding belt tracking during belt change - Electro-pneumatic air pressure monitoring - Infeed safety via contact roller for oversized workpieces - Workpiece feed via calibrated non-slip transport belts over heavy-duty, 1000 mm long cast iron tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for jerk-free and uniform workpiece transport - Feed gear motor with three different speeds for rapid adjustment to various wood types - All motors electrically protected - Ergonomically arranged controls on workpiece infeed side - Automatic workpiece thickness scanning (no pre-measurement necessary) - Digital thickness display (resolution 0.1 mm) with modern magnetic tape system Technical Data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Two brake motors for main drive: 5.5 kW - Feed motor: 1.0 kW Nwsdpfxjvu Hdts Agwep - Feed speed: 6, 11, and 16 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fibre brushes D 120 x 200 mm, each 0.37 kW - Extraction ports: 2 x 120 mm and 2 x 150 mm - Pneumatic connection: 6 bar - Working height: 850 mm - Length: 2105 mm - Length with control panel: 2490 mm - Width: 880 mm - Height: 1910 mm - Weight: approx. 1500 kg - Operating voltage: 400 V, 50 Hz, 3 phase - CE version ----- Base price of the machine on request! ----- Optional accessories at extra charge: Infinitely variable feed: 4–20 m/min for speed adjustment to fit ...