Uholné systémy kúpiť použité (36)
Zoradiť výsledky
- Najnižšia cena Najvyššia cena
- Najnovšie inzeráty Najstaršie inzeráty
- Najkratšia vzdialenosť Najväčšia vzdialenosť
- Najnovší rok výroby Najstarší rok výroby
- Najnovšia aktualizácia Najstaršia aktualizácia
- Výrobcovia od A po Z Výrobca od Z po A
- Relevancia
- Najnižšia cena
- Cena
- Najvyššia cena
- Cena
- Najnovšie inzeráty
- Dátum zverejnenia
- Najstaršie inzeráty
- Dátum zverejnenia
- Najkratšia vzdialenosť
- Vzdialenosť
- Najväčšia vzdialenosť
- Vzdialenosť
- Najnovší rok výroby
- Rok výroby
- Najstarší rok výroby
- Rok výroby
- Najnovšia aktualizácia
- Naposledy aktualizované
- Najstaršia aktualizácia
- Naposledy aktualizované
- Výrobcovia od A po Z
- Výrobca
- Výrobca od Z po A
- Výrobca
- Označenie od A po Z
- Označenie
- Označenie od Z po A
- Označenie
- Model od A po Z
- Model
- Model od Z do A
- Model
- Najnižšia referencia
- referencia
- Najvyššia referencia
- referencia
- Najkratšia doba prevádzky
- Prevádzková doba
- Najdlhšia doba prevádzky
- Prevádzková doba
- Relevancia
- Relevancia
Stroje na spracovanie dreva Stroje na výrobu okien Uholné systémy
malý inzerát

345 km
Obrábacie centrum rohových okien
SCMMULTIFLEX
Volať
Stav: veľmi dobrý (použitý), CNC obrábacie centrum na okná.
Gkedjwmxkhjpfx Agujc
malý inzerát

718 km
Okenný systém
GUBISCHEST-H 2000_IV68/78/88
Volať
Stav: použitý, Slotted spindle 1 pc
Number of milling units: 3 pcs.
Spindle diameter: 50 mm
Weight: approx. 7,500 kg
Gubisch Type EST-H 2000/2
---
Machine still in operation and available for inspection!
Manufacturer's description:
---
Single-sided angle combination unit for window and
door production, consisting of tenoning and
slotting machine, angle transfer, and milling machine
Crosscut saw:
---
Power: 3 kW
Speed: 3000 rpm
Saw blade diameter: 400 mm
Flange diameter: 80 mm
Adjustment: horizontal, manually adjustable,
readable via mechanical digital display
Adjustment range: 0-120 mm
Length stop LAS
---
Adjustment: manual
Length: extended to 3.2 m
Slotting unit (cross processing)
---
Gkodexmk Dwspfx Agujc
Power: 9.2 kW
Speed: max. 4500 rpm (speed depends on your
tools and is adapted accordingly)
Clamping height: 300 mm
Usable height: 300 mm
Shaft diameter: 50 mm
Max. tool diameter: 400 mm, min. 240 mm
Adjustment: vertical
Adjustment range: vertical 210 mm below table
Number of tools: 3 tool sets of 100 mm
each, with customer side 0-position 10 mm
Shortest workpiece: 320 mm + tenon
Narrowest workpiece: 48 mm
Widest workpiece: 170 mm
1st profile spindle
---
Spindle position: vertical right
Function: Profile production and climb milling automatic engagement
Power: 9.2 kW
Speed: 6000 rpm
Clamping height: 100 mm
Usable height: 100 mm
Diameter: 50 mm
Cutter circle diameter: 100 - 240 mm
Adjustment range: horizontal 70 mm, tool 0-position 10 mm
Number of tools: 1 up to 100 mm max. clamping length
2nd profile spindle
---
Spindle position: vertical right
Function: Profile production
Power: 9.2 kW
Speed: 6000 rpm
Clamping height: 300 mm
Usable height: 300 mm
Diameter: 50 mm
Cutter circle diameter: 100 - 240 mm
Adjustment range: horizontal 70 mm, vertical 100 mm for tool 0-position 10 mm
Number of tools: 3 up to 100 mm max. clamping length
3rd profile spindle
---
Spindle position: vertical right
Function: Profile production
Power: 9.2 kW
Speed: 6000 rpm
Clamping height: 300 mm
Usable height: 300 mm
Diameter: 50 mm
Cutter circle diameter: 100 - 240 mm
Adjustment range: horizontal 70 mm, vertical 100 mm for tool 0-position 10 mm
Number of tools: 3 up to 100 mm max. clamping length
4th profile spindle (glazing bead saw unit)
---
Spindle position: horizontal top, right
Power: 3.0 kW
Speed: 3000 rpm
Cutter circle diameter: 250 mm
Clamping flange mount: 60 mm diameter
Hydraulic adjustment: automatic up/down, forward/back for 1 base height
and 1 base depth
Further technical data
---
Clamping table slotting unit
---
On ball bearing and roller guides
Swivel adjustment manual: 60 degrees in both directions
Feed speeds: 0 - 28 m/min, infinitely variable
4 feed speed ranges: fast feed before slotting unit,
slow feed in cutting area adjustable,
fast feed to transfer,
fast return
Counter timber: counter timber changes automatically
with spindle lift
Transfer type to profiling area: automatic
Operating mode: single part production, frame
production and serial production possible
Longitudinal profiling
---
Bre...
malý inzerát

550 km
CNC obrábacie centrum na okná
WEINIGUNICONTROL 10
Volať
Stav: veľmi dobrý (použitý), Rok výroby: 1989, Funkcionalita: plne funkčný, Stroj na výrobu okien WEINIG Unicontrol UC 10-5
Gsdpoxmr N Ijfx Agujkc
1. Elektronicky riadená priečna píla s laserovým prepínaním medzi pílovým rezaním a nulovým kotúčom, motor 3 kW
2. Drážkovacie vreteno 50 x 630 mm pre nástroje 6 x 80 mm, motor 15 kW
3. Pozdĺžne/synchrónne profilovacie vreteno 50 x 320 mm pre nástroje 4 x 80 mm, motor 11 kW
4. Drážkovacie vreteno (medzi 1. a 2. zdvíhacím vretenom) D = 40 x 40 mm, axiálne indexované, motor 3 kW
5. Pozdĺžne profilovacie vreteno 50 x 320 mm pre nástroje 4 x 80 mm, motor 11 kW
6. Pozdĺžne profilovacie vreteno 50 x 320 mm pre nástroje 4 x 80 mm, motor 11 kW
7. Upínacie vreteno 40 x 150 mm, osový cyklus 3 pozície, radiálny cyklus 2 pozície, motor 3 kW
Vreteno píly a drážky na pravej strane, motor 3 kW
Kovanie vreteno 40 x 150 mm, motor 3 kW
Regulovateľný posuv 6–12 m/min., motor 1,1 kW
4-polohový počítadlový menič
Elektronický doraz dĺžky 3600 mm
Spätný podávač obrábaného dielu pomocou automatického otočného systému
Automatizačný balík
Intervalovo riadená podpora okenného krídla
Balík na dvojité diely
Pracovné stoly s laminovanou látkou (na brúsené povrchy)
Upínacie vedenie na ľavej strane, max. rozdiel šírky dreva 100 mm
Stroj je technicky aj vizuálne vo veľmi dobrom stave
malý inzerát

695 km
Závod na výrobu okien
WeinigUnicontrol 10
Volať
Stav: použitý, Rok výroby: 2000, Miesto uskladnenia: Nattheim
Gsdpfjvwdmwex Aguskc
malý inzerát

74 km
Uhlový systém okien stred / nástroj
ColomboAM33 AF
Volať
Stav: veľmi dobrý (použitý), Rok výroby: 2005, Predávam zariadenie na výrobu okenných rámov Colombo Angelo Figli AM33/AF.
Rok výroby: 2005.
Strana čepovania: píla + 620mm vreteno, plne servomotoricky ovládané.
Strana profilovania: 3 vretená + jednotka na rezanie líšt, plne servomotoricky ovládané.
Frézovacie hlavy VYDONA HOLZ EU78-92, drevo-hliník 92 – všetky programované v stroji a vrátane; možno odrátať z ceny, ak nie sú požadované.
Celkový výkon: 50 kW
Celková hmotnosť: 6000 kg.
Kompaktné rozmery – vhodné aj pre malé dielne.
K dispozícii ihneď zo skladu.
Stav: veľmi dobrý. Kompletný systém vrátane náradia; možnosť odpočítať z ceny, ak náradie nechcete.
Pre viac fotografií a informácií prosím kontaktujte ma.
Gkedpfxsh Txkqe Agusc
Objavte viac použitých strojov
malý inzerát

961 km
Uhlový systém
GubischCW3
Volať
Stav: dobrý (použitý), Rok výroby: 2001, Funkcionalita: plne funkčný, GUBISCH Centromat CW3 Použitý stroj na výrobu okien a dverí s vretenami s priemerom 50 mm na pozdĺžne profilovanie
Nasledujúce časti už boli vymenené:
Energetický reťazec a elektrické vedenie k drážkovaciemu stolu
Izolačné rohože v krytoch
Pneumatické hadice
Ložisko pre kontrastranu
Strana pre spájanie v pozdĺžnej oblasti
Otočný snímač pre druhé drážkovacie vreteno
Gksdpfxjxgqluj Agujc
Ložisko pre drážkovací stôl
PC bol vyčistený a skontrolovaný
Rôzne pneumatické valce
Klinový remeň
malý inzerát

655 km
Uhlový systém
WeinigUnicontrol 10
Volať
Stav: použitý, Rok výroby: 2001, Funkcionalita: neoverené, zdvih vretena: 40 mm, Linka na výrobu okien Weinig UNICONTROL 10
Gedpfx Agsu A Ixfouekc
malý inzerát

704 km
Okenný systém
WEINIGUnicontrol 12 NC
Volať
Stav: použitý, Grooving spindle, 2 pcs.
Number of milling units: 7 pcs.
Spindle diameter: 50 mm
Control: Weinig, PC-Nexus
Weinig Unicontrol 12
with radial and axial NC spindles, VARIO table, and trenching carriage
.....
Machine professionally dismantled and stored at our warehouse in 73447 Oberkochen.
Video and pictures were taken before dismantling.
Technical Data Summary
(For any additionally included accessories, please inquire)
.....
Cross-cut saw
.....
> Cross-cut saw, electronically and horizontally infinitely adjustable
> Number of tools: 1 pc.
> Spindle speed: 2,800 rpm
> Spindle diameter: 40 mm
Gedpfx Aevu Hdysguokc
> Max. tool diameter: 400 mm
> Motor power: 3.7 kW
> Laser alignment light for detection of the saw section
> Axial adjustment travel: 150 mm, NC axis, electronically infinitely adjustable
> Radial adjustment: pneumatic, 8 positions, e.g. for edge rounding from above
Rounding unit
.....
> Position: horizontal, below
> Motor power: 1.5 kW
> Spindle diameter: 20 mm
> Tool clamping length: 25 mm
> Spindle speed: 9,000 rpm
> Max. tool diameter: 130 mm
> Axial adjustment path mechanically coupled with cross-cut saw.
> Radial adjustment: pneumatically actuated, On/Off
electronic length stop
.....
> Length: 4,500 mm
1st Tenoning and Grooving Spindle
.....
> Number of tools: variable
> Motor power: 15 kW
> Spindle diameter: 50 mm
> Tool clamping length: 640 mm, with supporting bearing
> Axial adjustment travel: 580 mm, NC axis, stepless
> Spindle speed: 2,800 rpm
> Max. tool diameter: 400 mm
> Counter-pressure system: complete clamping length is counter-supported
2nd Tenoning and Grooving Spindle
.....
> Number of tools: variable
> Motor power: 15 kW
> Spindle diameter: 50 mm
> Tool clamping length: 640 mm, with supporting bearing
> Axial adjustment travel: 580 mm, NC axis, stepless
> Spindle speed: 2,800 rpm
> Max. tool diameter: 400 mm
> Counter-pressure system: complete clamping length is counter-supported
Transfer belt
.....
For transfer of parts to the longitudinal processing, including double part separation before the entry to the longitudinal processing.
1st Profiling Spindle (climb and conventional milling)
.....
> Position: vertical right
> Number of tools: variable
> Motor power: 11 kW
> Spindle diameter: 50 mm
> Tool clamping length: 400 mm, with supporting bearing
> Axial adjustment travel: 350 mm, NC axis, stepless
> Radial adjustment travel: 80 mm, NC axis, stepless
> Spindle speed: 6,000 rpm
> Tool cutting circle min.: 140 mm
> Tool cutting circle max.: 232 mm
> 2 feed rollers opposite the spindle, axially pneumatically controlled, 8 positions
> Table plate pneumatically controlled to tool diameter
2nd Profiling Spindle
.....
> Position: vertical right
> Number of tools: variable
> Motor power: 11 kW
> Spindle diameter: 50 mm
> Tool clamping length: 400 mm, with supporting bearing
> Axial adjustment travel: 350 mm, NC axis, stepless
> Radial adjustment travel: 80 mm, NC axis, stepless
> Spindle speed: 6,000 rpm
...
malý inzerát

876 km
Uhlový systém
OkomaUF 4 S
Volať
Stav: použitý, Rok výroby: 1981, Funkcionalita: plne funkčný, OKOMA uhlová jednotka s novým riadením Siemens. Na drážkovanie, pozdĺžnu úpravu, vyrezávanie a ohýbanie zasklievacích líšt. Všetky vretená s pneumatickým zdvihom a s pneumatickým taktom zap./vyp. Vretená s priemerom 40 mm. - Nastaviteľná pílová jednotka - 1 drážkovacie vreteno - 1 vreteno v pozdĺžnej oblasti vrátane pravého a ľavého chodu - 3 vretená v pozdĺžnej oblasti - Píla na zasklievacie lišty zhora - Motorický plynulý posuv - Valčekový dopravník na spätný transport drevených dielov - Frézovací doraz v pozdĺžnej oblasti - Automatický drážkovací stôl s pneumatickým upnutím a motorickým posuvom, naklápateľný - Stroj vrátane nástroja Golg
Godoxdfdmepfx Aguskc
malý inzerát

695 km
Uhlový systém
OkomaUF 3 S
Volať
Stav: použitý, Rok výroby: 1985, Hmotnosť: cca 3000 kg Rozmery: cca 3700 x 2000 x 1600 mm Miesto skladovania: Nattheim
Gedpevvi Ttofx Agujkc
malý inzerát

74 km
Uholný systém konštrukcie okna stred
SCMMultiflex + Vivaldi EU68mm
Volať
Stav: veľmi dobrý (použitý), Rok výroby: 2000, Predávam obrábaciu linku na výrobu okenných rámov SCM Multiflex.
Frézovacie hlavy VIVALDI EU68mm.
Rezacia + čapovacia vreteno vpravo / čapová strana.
2 ks profilovacích frézovacích vretien + píla na rezanie zasklievacích líšt vľavo / profilová strana.
K dispozícii ihneď.
Gedpfshw Dfyex Aguekc
malý inzerát

116 km
Obrábacie centrum pre uhlové okná
SCMMultiflex
Volať
Stav: veľmi dobrý (použitý), SCM Multiflex – centrum kątowe do jednostronnej obróbki poprzecznej i wzdłużnej naroży okien i drzwi
Wrzeciono czopujące o długości 320 mm, maksymalny zakres roboczy 320 mm
System posuwu z rolkami
Wrzeciono profilujące o długości 320 mm, maksymalny zakres roboczy
Gkjdpfx Aswmcnwjgujc
malý inzerát

655 km
Uhlový systém
WeinigUnicontrol 12
Volať
Stav: veľmi dobrý (použitý), Rok výroby: 2011, Funkcionalita: plne funkčný, Unicontrol 12
Skladá sa z: koncovacieho agregátu (poz. A),
čapovacej a drážkovacej vretena (poz. C),
transferového pásu (poz. I),
profilovacie vreteno (poz. L),
profilovacie vreteno (poz. N),
vertikálny pravý profilovací frézovací agregát (poz. P)
Na výrobu jednotlivých dielov a prvkov v rámovej alebo sériovej výrobe.
Zariadenie sa skladá z priečneho obrábacieho agregátu a pozdĺžneho obrábacieho agregátu, ktoré sú prepojené transferovým pásom.
Pracovná šírka: 40–140 mm
(viď prítlačné pravítko vľavo: 40 – 140 mm)
Pracovná výška: 40–120 mm
Minimálna dĺžka obrobku:
cca 275 mm + 1 × dĺžka koncového profilu
Pozdĺžne obrábanie:
cca 220 mm + 2 × dĺžka koncového profilu
Maximálna dĺžka obrobku: 3500 mm
Rozmery obrobkov závisia od vybavenia stroja, typu výroby a použitého náradia. Konečná definícia rozmerov je možná až po prijatí, kontrole a schválení kompletných a definitívnych technických výkresov náradia.
Priečne obrábanie:
Výkon motora pre posuv stola: 0,3 kW (0,4 PS)
Prednastavená posuvová rýchlosť pri pílení, profilovaní a spätnom chode: 3–25 m/min
Vario stôl (umožňuje výrobu štúdiových okien)
Upínaciu dĺžku všetkých čapovacích a drážkovacích vretien je možné využiť bez voľnej pozície pre náradie.
Upínanie obrobku prostredníctvom upínacieho mostíka,
aktivované upínacím valcom zabudovaným pod stolom.
Dĺžkový doraz NC riadený, namontovaný na drážkovacom stole.
Príprava na štúdiové okno, maximálny uhol natočenia: +/- 75°
Minimálna dĺžka obrobku pri šikmých oknách závisí od uhla a šírky dreva.
Gsdjumci Sjpfx Aguokc
Možné rozmery dielov pri výrobe šikmých okien:
Uhol Max. Min.
Pracovná Dĺžka obrobku
šírka
+/-75° 80 mm 800 mm
+/-70° 120 mm 490 mm
+/-60° 240 mm 360 mm
+/-90° 350 mm 185 mm
Pri uhloch väčších ako 60° len protibearbe
Komisia nie je zdokumentovaná
1) NC nastavovanie uhla automaticky pre obrábanie šikmých dielov
Ochrana proti vytrhávaniu triesok pomocou protirotujúceho kontera po celej dĺžke vretena pre čapovanie a drážkovanie pri 90° obrábaní. Manuálne posuvná konterlišta pre obrábanie šikmých dielov.
2) Dodatočné protikusy
malý inzerát

704 km
Okenný systém
WEINIGUnicontrol 12 NC
Volať
Stav: použitý, Slotted spindle 2 pcs.
Number of milling units: 7 pcs.
Spindle diameter: 50 mm
Control: CNC, Weinig PC-Nexus
Weinig Uncontrol 12
with radial and axial NC spindles as well as VARIO table
.....
The machine has already been professionally disassembled and stored at 73447 Oberkochen
Technical Data Overview
(Please inquire about any additionally included accessories)
.....
Cross-cut saw
.....
> Cross-cut saw, electronic, horizontally and steplessly adjustable
> Number of tools: 1 pc.
> Spindle speed: 3,000–6,000 rpm
> Spindle diameter: 40 mm
> Max. tool diameter: 400 mm
> Motor power: 3.7 kW
> Laser guide light for saw cut detection
> Axial adjustment range: 150 mm NC axis, electronically stepless
> Radial adjustment: pneumatic, 8 positions, e.g. for top edge rounding
Gkjdpfx Agewmgfyouoc
Rounding unit
.....
> Position: horizontally below
> Axial adjustment together with cross-cut saw
Electronic length stop
.....
> Length: 4,500 mm
1st tenoning and slotting spindle
.....
> Number of tools: variable
> Motor power: 15 kW
> Spindle diameter: 50 mm
> Tool clamping length: 640 mm, with counter bearing
> Axial adjustment range: 580 mm NC axis, stepless
> Spindle speed: 2,800–4,000 rpm
> Tool diameter: 380–400 mm
> Follow-up counter, full clamping length is countered
2nd tenoning and slotting spindle
.....
> Number of tools: variable
> Motor power: 15 kW
> Spindle diameter: 50 mm
> Tool clamping length: 640 mm, with counter bearing
> Axial adjustment range: 580 mm NC axis, stepless
> Spindle speed: 2,800–4,000 rpm
> Tool diameter: 380–400 mm
> Follow-up counter, full clamping length is countered
Transfer belt
.....
For transferring parts to longitudinal processing, including
double part separation before the infeed to longitudinal processing.
1st profiling spindle (climb and counter rotation)
.....
> Position: vertical right
> Number of tools: variable
> Motor power: 11 kW
> Spindle diameter: 50 mm
> Tool clamping length: 400 mm, with counter bearing
> Axial adjustment range: 350 mm NC axis, stepless
> Radial adjustment range: 80 mm NC axis, stepless
> Spindle speed: 6,000 rpm
> Tool rotation diameter min.: 140 mm
> Tool rotation diameter max.: 232 mm
2nd profiling spindle
.....
> Position: vertical right
> Number of tools: variable
> Motor power: 11 kW
> Spindle diameter: 50 mm
> Tool clamping length: 400 mm, with counter bearing
> Axial adjustment range: 350 mm NC axis, stepless
> Radial adjustment range: 80 mm NC axis, stepless
> Spindle speed: 6,000 rpm
> Tool rotation diameter min.: 140 mm
> Tool rotation diameter max.: 232 mm
3rd profile milling unit (grooving unit from above)
.....
> Position: horizontal top
> Motor power: 3.0 kW
> Spindle diameter: 40 mm
> Tool clamping length: 40 mm
> Axial adjustment range: 30 mm NC axis, stepless
> Radial adjustment range: 125 mm NC axis, stepless
> Spindle speed...
malý inzerát

296 km
Obrábacie centrum s uhlovým oknom
ColomboColombo AM60
Volať
Stav: dobrý (použitý), Rok výroby: 2005, Funkcionalita: plne funkčný, dĺžka posuvu os X: 3 200 mm, priemer vretena: 60 mm, maximálna rýchlosť vretena: 6 000 ot./min, výkon frézovacej jednotky: 7 500 W, otáčky (max.): 6 000 ot./min, celková výška: 600 mm, požadovaná šírka: 8 000 mm, požiadavok na dĺžku priestoru: 7 000 mm, celková hmotnosť: 15 500 kg, dĺžka frézovacieho vretena: 600 mm, priemer pílového kotúča: 400 mm, výkon: 70 kW (95,17 k), vstupné napätie: 380 V, typ nastavenia výšky: elektrický, výkon podávacieho motora: 7 700 W, pracovná výška: 120 mm, pracovná šírka: 160 mm, vysokovýkonný stroj na výrobu okien, s 2 navŕtavačmi a dvoma pravými a jedným ľavým profilovacím hriadeľom, vyrába priame okná v hrúbkach 68-88-130 mm. Dodanie po dohode
Gjdpfotp Dngsx Agujkc
malý inzerát

558 km
CNC centrum weinig UNICONTROL 10
CNC Center weinig UNICONTROL 10CNC Center weinig UNICONTROL 10
Volať
Stav: použitý, Rok výroby: 1991, stroj na výrobu okien, uhlové centrum, profilovanie a čapovanie okenných krídel
Gjdpfxjdm Umlj Aguokc
malý inzerát

704 km
Okenný systém
WEINIGUnicontrol 6 NC-Spindeln
Volať
Stav: použitý, Slotting spindle 1 pc.
Number of milling units 5 pcs.
Spindle diameter 50 mm
Control Weinig, PC-Nexus
# 2774 Weinig Unicontrol 6 with NC spindles
Machine will be cleaned and fully checked before delivery
-----
Technical Data Summary
(Any additionally included accessories upon request)
Pos. 1: Cross-cut saw
-----
> Number of tools: 1 pc.
> Spindle speed: 2,800 rpm
> Spindle diameter: 40 mm
> Max. tool diameter: 400 mm
> Motor power: 3 kW
> Radial adjustment pneumatically controlled in 8 positions, e.g. for top edge rounding
> Laser guide light for identifying the saw section
Pos. 2: Horizontal rounding unit, below
-----
> Position: horizontal below
> Motor power: 1.5 kW
> Spindle diameter: 20 mm
> Clamping length: 25 mm
> Spindle speed: 9,000 rpm
> Max. tool swing diameter: 130 mm
> Axial adjustment mechanically coupled with cross-cut saw
> Radial adjustment pneumatically controlled on/off
NC-controlled length stop
-----
> Length: 3,500 mm
> Electronic length stop
Pos. 3: Tenoning and slotting spindle
-----
> Number of tools: variable, continuously adjustable, NC
> Tool clamping length: 320 mm
> Spindle stroke, vertical: variable 254 mm, continuously adjustable, NC-controlled
> Spindle speed: 3,500 rpm
> Max. tool swing diameter: 320 mm
> Spindle diameter: 50 mm
> Max. tool diameter: 320 mm
> Motor power: 11 kW
Pos. 4: 1st profiling spindle (climb and conventional milling)
-----
> Position: vertical right
> Number of tools: 1 pc.
> Tool clamping length: 120 mm
> Spindle speed: 6,000 rpm
> Spindle diameter: 50 mm
> Max. tool swing diameter: 232 mm
> Motor power: 7.5 kW
Pos. 5: 2nd profiling spindle
-----
> Position: vertical right
> Number of tools: variable, continuously adjustable, NC
> Tool clamping length: 320 mm
> Spindle stroke, vertical: variable 254 mm, continuously adjustable, NC-controlled
> Spindle speed: 6,000 rpm
> Spindle diameter: 50 mm
> Max. tool swing diameter: 232 mm
> Motor power: 11 kW
2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions
Sash bar guide consisting of:
Guide rail in the stop (area of the climb milling spindle),
Sash support bar from above in the area of the vertical profiling unit on the right and profiling spindle.
Pos. 6: Horizontal profiling unit, above
-----
> Clamping length: 40 mm
> Spindle diameter: 40 mm
> Motor power: 3.0 kW
> Speed: 9,000 rpm
> Max. tool swing diameter: 130 mm
> Axial adjustment: 30 mm, 8 positions
> Radial adjustment: 125 mm, 8 positions
Pos. 7: 3rd profiling spindle (hardware spindle)
Gksdpevu Hghofx Aguec
-----
> Position: vertical right
> Tool clamping length: 160 mm
> Axial adjustment: 115 mm, 8 positions
> Radial adjustment: 110 mm, 8-position turret
> Spindle speed: 5,850 rpm
> Spindle diameter: 40 mm
> Max. tool swing diameter: 210 mm
> Motor power: 3.0 kW
Pos. 8: Profiling/grooving unit from below
-----
> Motor power: 3.0 kW
> Tool clamping length: 125 mm
> ...
malý inzerát

704 km
Okenný systém
WEINIGUnicontrol 10 NC
Volať
Stav: použitý, Slotting spindle: 1 pc
Number of milling units: 4 pcs
Spindle diameter: 50 mm
Control: Weinig, PC-Nexus
4 Weinig Unicontrol 10 CNC - spindles radial and axial CNC-controlled
Machine overhauled in 2024 by Weinig factory service.
Control system upgraded to Siemens S7 677 C with new membrane touch panel.
Comes with the following processing units:
Cross-cut saw
-----
With laser alignment light, motor power 3 kW, spindle diameter 40 mm,
Spindle speed: 3,000 rpm
Axial adjustment via NC-axis
Radial adjustment pneumatic, 8 positions for top edge rounding
Bottom unit for edge rounding
-----
Axial adjustment together with cross-cut saw
Tenoning and slotting spindle
-----
Motor power: 15 kW
Spindle diameter: 50 mm
Spindle speed: 2,925 rpm
Gsdsw Im H Sepfx Aguekc
Tool diameter min. 380, max. 400 mm
Tool clamping length: 640 mm
Axial adjustment CNC axis
Axial travel: 580 mm
Adjustment speed: 100 mm/sec
1st profile spindle (climb & conventional milling)
-----
Motor power: 11 kW
Spindle diameter: 50 mm
Spindle speed: 6,000 rpm
Tool clamping length: 400 mm with support bearing
Axial and radial adjustment via CNC axis
2nd profile spindle
-----
Motor power: 11 kW
Spindle diameter: 50 mm
Spindle speed: 6,000 rpm
Tool clamping length: 400 mm with support bearing
Axial and radial adjustment via CNC axis
Horizontal profile milling unit, top
-----
Motor power: 3 kW
Spindle diameter: 40 mm
Spindle speed: 9,000 rpm
Pneumatic adjustment, 8 positions axial and radial
Vertical profile milling unit, right at machine end
-----
Motor power: 3 kW
Spindle diameter: 40 mm
Spindle speed: 5,850 rpm
Pneumatic adjustment, 8 positions axial and radial
Additional equipment
-----
CNC-controlled length stop, mounted on slot table
For lengths up to 3,500 mm, incl. positioning cross-cut saw integrated in control
Studio window setup, swivels 60° to both sides
Paired-workpiece kit with automatic separation and handover
Climb feed system with window automation for sash profiling
Sash profiling cart for narrow sash widths
Air conditioning unit in the control cabinet
PC control NEXUS
Automatic turning system
Lamella conveyor incl. transport belt for return transport of workpieces to operator
(Technical data according to manufacturer – without guarantee).
malý inzerát

704 km
Okenný systém
WEINIGUnicontrol 6 NC Spindeln
Volať
Stav: použitý, Slot spindle 1 pc.
Number of milling units: 4 pcs.
Spindle diameter: 50 mm
Control system: Weinig, PC-Nexus
#2764 Weinig Unicontrol 6 with NC spindles
-----
Machine will be cleaned and completely inspected prior to delivery
Technical Data Overview
(additional included accessories on request)
Pos. 1: Crosscut Saw
-----
> Crosscut saw, electronic, horizontally adjustable – stepless
> Number of tools: 1 pc.
> Spindle speed: 2,800 rpm
> Spindle diameter: 40 mm
> Max. tool diameter: 400 mm
> Motor power: 3.0 kW
> Laser guide light for precise identification of saw cut
> NC length stop, mounted on slot table included
Positioning of the crosscut saw integrated in control
> Length: 3,500 mm
Pos. 2: Tenoning and Slot Spindle
-----
> Number of tools: variable, stepless adjustment NC axis
> Tool clamping length: 320 mm
> Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis
> Spindle speed: 3,500 rpm
> Spindle diameter: 50 mm
> Max. tool diameter: 320 mm
> Motor power: 11 kW
Pos. 3: 1st Profiling Spindle (Conventional and Counter-Rotating)
> Position: vertical, right
> Number of tools: 1 pc.
> Tool clamping length: 120 mm
> Spindle speed: 6,000 rpm
> Spindle diameter: 50 mm
> Max. tool circle: 232 mm
> Motor power: 7.5 kW
Pos. 4: 2nd Profiling Spindle
-----
> Position: vertical, right
> Number of tools: variable, stepless adjustment NC axis
> Tool clamping length: 320 mm
> Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis
> Spindle speed: 6,000 rpm
> Spindle diameter: 50 mm
> Max. tool circle: 232 mm
> Motor power: 11 kW
2 feed rollers opposite the spindle, axially controlled pneumatically, 2 positions
Sash bar guide consisting of:
Stop guide rail (area of conventional spindle),
Sash bar support from above in the area of the vertical right profiling unit and profiling spindle.
Gedpfx Agsvu Hfqeujkc
Pos. 5: Horizontal Top Profiling Unit
-----
> Clamping length: 40 mm
> Spindle diameter: 40 mm
> Motor power: 3.0 kW
> Speed: 5,850 rpm
> Max. tool circle: 130 mm
> Axial adjustment: 30 mm, 8 positions via pneumatic turret
> Radial adjustment: 125 mm, 8 positions via pneumatic turret
Pos. 6: 3rd Profiling Spindle (Fitting Spindle)
-----
> Position: vertical, right
> Tool clamping length: 160 mm
> Axial adjustment: 115 mm, 8 positions via pneumatic turret
> Radial adjustment: 100 mm, 8 positions via pneumatic turret
> Spindle speed: 5,850 rpm
> Spindle diameter: 40 mm
> Max. tool circle: 210 mm
> Motor power: 3.0 kW
Further Features
-----
> Online-capable
> Rebating device for splinter-free rebating
> Dual workpiece machining package
> Return feed unit for single-operator use: lamella conveyor
> Screen control
> Tilt window feature
> Electronic angle display for tilt windows
> Industrial PC, PC control/NEXUS
> Weinig model production programme
> Without processing tools
No original pictures available yet.
Photos show identical machine from our archive
-----
Price of the above-mentioned machine on request!
-----
Option at additional cost: EUR 6,500.00
...
malý inzerát

704 km
Okenný systém
Haberkorn,Okoma,GoetzingerFZS1,SF3F,OBM Plus
Volať
Stav: použitý, Slot spindle 1 pc.
Number of milling units: 0 pcs.
Spindle diameter: 40 mm
Small window production line consisting of:
-----
1) Haberkorn FZS1 slot mortising machine
2) Okoma SF3F spindle moulder
3) Oertli tooling for Haberkorn and Okoma machines
Wooden window set IV 68/78/88 and one set of wood-aluminium windows IV 68/78, year 2011
4) Götzinger OBM Plus corner and olive drilling machine, fittings for Maco MultiMatic
-----
Technical manufacturer description:
- Haberkorn FZS1 slot mortising machine with automatic feed
- Infinitely variable height adjustment, D 40 mm
Cross-cut saw:
- Spindle arrangement: top
Gkjdpfx Agexa Hi Nsusc
- Three-phase motor: 3 kW
- Spindle diameter: 30 mm
- Speed: 2800 rpm
- Saw blade diameter: 400 mm
- Automatic brake with speed monitoring
- Horizontal positioning pneumatic, manually adjustable
- Guard and extraction hood with extraction nozzle diameter: 100 mm
Slot spindle D 40 mm:
- Power: 7.5 kW
- Speed: 4200 rpm
- Usable length: 252 mm
- Max. tool diameter: 340 mm
- 220 mm stroke, infinitely variable height adjustment via precision ball screws
- Guard and extraction hood with extraction nozzle diameter: 180 mm
- Automatic brake with speed monitoring
Universal table:
- Swivel range: +/- 65 degrees
- Automatic counterblock change (programmable)
- Pneumatic clamp
- High-precision electronic angle display
- Automatic length compensation
- Counterblock always in the cutting plane for every angle setting
Special equipment:
- Laser for workpiece positioning
- Saw position pneumatic
- Length stop LA 2500 mm + 1850 mm extension
-----
2) Okoma SF3F spindle moulder with lift spindle, 3 tools
- Extraction port: 2 x 120 mm
- Spindle length: 270 mm
- Fence with fine adjustment and turret
- Triple lift, max. stroke height 90 mm
- Glazing bead separating saw with guard and extraction hood, 80 mm diameter
- 8-roller power feed with stand and hold-down arm, required for glazing bead separating saw
- Pneumatic edging device for edge gears, speed 6000 rpm
- 2 x 3 kW motor
- Mounting diameter: 30 mm
-----
3) Oertli tooling for Haberkorn and Okoma machines
- 1 set wooden windows IV 68/78/88
- 1 set wood-aluminium windows IV 68/78
-----
4) Götzinger OBM Plus corner and olive drilling machine
- Corner and scissor stays + handle/olive drilling
- Vertical drilling unit with:
- Quick-change drill spindle
- Pneumatic feed via foot pedal
- 1x olive drilling head 24 mm
- 1x double-head corner bearing unit
- Fittings for Maco MultiMatic
- 1x adjustable left stop with 6 positions
- 1x adjustable right stop with 6 positions
- 1x complete machine stand with storage shelf
- 220/400 V, 60 Hz, 1.3 kW
- 1x roller conveyor approx. 1 m long with 2 rollers
- 1x roller conveyor approx. 1.5 m long with 3 rollers
-----
Price for the above machines on request!
Packing and shipping extra
-----
(technical data as per manufacturer - without guarantee!)
All prices are net, plus statutory VAT.
malý inzerát

718 km
Okenný systém
WEINIGUnicontrol 6
Volať
Stav: použitý, Slot spindle 1 pc.
Number of milling units: 4 pcs.
Spindle diameter: 50 mm
1 Used Weinig Unicontrol 6 Window Production Line
-----
For sale on behalf of customer
Manufacturer's description:
For the production of single parts, assemblies, and small series.
Spindle Arrangement:
One crosscut saw, one single-sided tenoning and slotting spindle,
one right-hand profiling spindle, one tenoning-slotting spindle and
profiling spindle suitable for mounting multiple tools one above the other,
equipped with pneumatic spindle movement.
Slotting table with motor-driven table movement and automatic
transfer into the continuous, chainless rubber roller
drive feed of the profiling unit, feed height adjustment
manual.
Workpiece clamping via 2 pneumatic clamping cylinders.
Length stop with scale and magnifier for frame or
sash external dimension.
Godpfxjw I Ea Do Agujkc
Tool position control (longitudinal and cross machining)
via selector switch from the control panel.
Technical Data
-----
Crosscut saw
-----
Number of tools: 1
Spindle speed: 2,800 rpm
Spindle diameter: 40 mm
Max. tool diameter: 350 mm
Motor: 3 kW
Tenoning and slotting spindle
-----
Number of tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92
Spindle speed: 3,500 rpm
Spindle diameter: 50 mm
Tool clamping length: 320 mm
Max. tool diameter: 320 mm
Motor: 11 kW
Profiling spindle
-----
Number of tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92
Spindle speed: 6,000 rpm
Spindle diameter: 50 mm
Tool clamping length: 320 mm
Max. tool diameter: 232 mm
Motor: 11 kW
Special Equipment:
Synchronous Spindle
-----
Pneumatically actuated forward-backward movement for tear-free
re-milling of window sashes, frames, and doors.
Spindle diameter: 50 mm, 4 kW
Tool clamping length: 120 mm, min. tool diameter 112-140 mm,
Max. tool diameter: 232 mm, Spindle speed: 6,000 rpm
Motor upgrade for synchronous spindle from 4 kW to 7.5 kW
Screen control for 99 window types,
1 type can contain up to 8 different parts with 2 end profiles
each and 2 longitudinal profiles. Manufacturing options: single parts, double parts,
per frame, serial production, re-milling. Data entry via keyboard with integrated
operator guidance and fault diagnosis.
1 Grooving spindle from above
-----
Motor power: 2.2 kW
Speed: 6,000 rpm
Spindle diameter: 40 mm, with feather key 10 x 4 mm
Mounting length: 13 mm
Clamping length: 40 mm
Axial indexing: 2 positions
Radial indexing: 2 positions
Max. tool diameter: 130 mm
Motor upgrade for grooving spindle from 2.2 kW to 3 kW
1 Hardware milling unit, right side:
-----
For routing the hardware groove in the re-milling operation or for grooving in the longitudinal profile.
Pneumatic horizontal movement with selector switch in the control panel.
Motor power: 2.2 kW
Speed: 6,000 rpm
Spindle diameter: 40 mm
Clamping height: 125 mm
Tool swing diameter: min. 140 mm, max. 180 mm
Home position below table level: 10 mm
Special design hardware milling head:
Clamping length: 150 mm
Axial stroke: 80 mm, 3 positions
3 tools
Radial indexing: 2 positions
Motor upgrade for hardware milling spindle from 2.2 kW to 3 kW
Hardware milling spindle for 230 mm tool diameter at and above table height
Electrical height adjustment of the feed with selector switch in the control panel
for 2 wood dimensions, incl...
Pečať dôvery
Predajcovia certifikovaní spoločnosťou Machineseeker

malý inzerát

718 km
Okenný systém
WEINIGUnicontrol 6 mit GLS
Volať
Stav: použitý, Slot spindle 1 pc.
Number of milling units: 4 pcs.
Spindle diameter: 50 mm
1 used Weinig Unicontrol 6 with GLS
-----
For sale on behalf of customer
Technical Data Summary
-----
1. Cross Cut Saw
-----
Cross cut saw pneumatic, against 8-position revolver stop
Spindle speed: 2800 rpm
Spindle diameter: 40 mm
Max. tool diameter: 350 mm
Motor power: 3 kW
Laser guide for cut line detection
Manual length stop 4100 mm
1. Tenoning and Slotting Spindle
-----
Number of tools: 3 / 4 pcs.
Tool clamping length: 320 mm
Vertical spindle stroke pneumatic: 240 mm for timber thickness IV 68-92
Spindle speed: 3500 rpm
Spindle diameter: 50 mm
Max. tool diameter: 320 mm
Motor power: 11 kW
1. Profiling Spindle – Synchronous Spindle (climb and conventional milling)
-----
Position: vertical right
Number of tools: 1 pc.
Tool clamping length: 120 mm
Spindle speed: 6000 rpm
Spindle diameter: 50 mm
Max. tool swing: 232 mm
Motor power: 7.5 kW
2. Profiling Spindle
-----
Position: vertical right
Number of tools: 3 / 4 pcs.
Tool clamping length: 320 mm
Gkodpfxew Im Hxo Aguoc
Vertical spindle stroke pneumatic: 240 mm for timber thickness IV 68-92
Spindle speed: 6000 rpm
Spindle diameter: 50 mm
Max. tool swing: 232 mm
Motor power: 11 kW
3. Profiling Spindle (Hardware Spindle)
-----
Position: vertical right
Number of tools: 3 pcs.
Spindle speed: 6000 rpm
Spindle diameter: 40 mm
Max. tool swing: 180 mm
Motor power: 3 kW
Clamping length: 150 mm
4. Glazing Bead Saw, horizontally/vertically indexed
-----
Position: horizontal, top
Number of tools: 1 pc.
Tool clamping length: 40 mm
Spindle diameter: 40 mm
Motor power: 3 kW
Axial indexing: 2 positions
Radial indexing: 2 positions
Additional Features
-----
Scribing station to avoid tear-out\nDouble component feed
Return conveyor for single-operator usage at working height: pivoting bath
Screen control with 99 programs
Inclined window configuration
Electronic angle display for inclined windows
Option Window Tooling OPPOLD Year 2013:
Oppold IV 68/78/92 Timber
Oppold IV 68/78 Timber-Aluminium
(Technical data as provided by manufacturer – subject to change!)
malý inzerát

718 km
Okenný systém
SCMWindor 100_Video
Volať
Stav: použitý, Rok výroby: 2007, Slot spindle 3 pcs.
Number of milling units: 5 pcs.
Spindle diameter: 50 mm
Control: Control 100 PC
SCM Windor 100 CNC – still in operation, available for inspection until the end of December 2025
-----
High-performance and flexible CNC production line for windows and doors
Machining of workpieces up to max. 4500 mm length, 250 mm width and 150 mm thickness
Consisting of Windor 60 Version B
Infeed conveyor
Slotting Unit:
-----
Pos. 1: Cross-cut saw
-----
- Motor 4 kW
- 3000 rpm
- Spindle diameter 40 mm
- Maximum tool diameter 400 mm, bore 80 mm
Pos. 2: 1st slot spindle
-----
- High-performance spindle with top bearing, spindle length 620 mm
- Spindle diameter 50 mm
- Motor 11 kW
- 3500 rpm
- Maximum tool diameter 370 mm
- Counter device "Jolly"
- Stepless vertical positioning
- Interpolating rotation, automatic angled window device +/- 60 degrees
Pos. 3: Electrospindle with HSK 63 F tool holder
-----
- Min./max. rotation speed 1,000–12,000 rpm
- Maximum motor power 11 kW
- Water cooling
- Rapid 24 automatic tool changer with 24 positions
Pos. 4: 2nd slot spindle
-----
- High-performance spindle with top bearing, spindle length 620 mm
- Spindle diameter 50 mm
- Motor 11 kW
- 3500 rpm
- Maximum tool diameter 370 mm
- Counter device "Jolly"
- Stepless vertical positioning
- Interpolating rotation, automatic angled window device +/- 60 degrees
Pos. 5: 3rd slot spindle
-----
- High-performance spindle with top bearing, spindle length 620 mm
- Spindle diameter 50 mm
- Motor 11 kW
- 3500 rpm
- Maximum tool diameter 370 mm
- Counter device "Jolly"
- Stepless vertical positioning
Fleximat
-----
Including left and right stops with horizontal CNC adjustment for the following through-feed operations:
Lock case milling and 9-degree "Anuba" drilling from the right. Dowel drilling and striker plate marking from left and right, each with 7 spindles. Cup hinge drillings and olive drillings from above.
Profiling Unit
-----
Pos. 5: Power 2000 F4: Electrospindle with HSK 63 F tool holder
-----
- Working from the left
- Min./max. rotation speed 1,000–18,000 rpm
- Maximum motor power 12 kW
- Water cooling
- Rapid 24 automatic tool changer with 24 positions
Pos. 6: 1st profiling spindle from the right
-----
- High-performance spindle with top bearing, spindle length 620 mm
- Spindle diameter 50 mm
- Motor 11 kW
- 6000 rpm
- Tool diameter min./max. 130–250 mm
- Stepless vertical positioning
- Stepless horizontal positioning
Gkjdpfxsw Im Iio Agujc
Pos. 7: 2nd profiling spindle from the right
-----
- High-performance spindle with top bearing, spindle length 620 mm
- Spindle diameter 50 mm
- Motor 11 kW
- 6000 rpm
- Tool diameter min./max. 130–250 mm
- Stepless vertical positioning
- Stepless horizontal positioning
Pos. 7: 3rd profiling spindle from the right
-----
- High-performance spindle with top bearing, spindle length 620 mm
- Spindle diameter 50 mm
- Motor 11 kW
- 6000 rpm
- ...
malý inzerát

718 km
Okenný systém
WEINIGUnicontrol 12
Volať
Stav: použitý, Slot spindle, 2 pcs.
Number of milling units: 8 pcs.
Spindle diameter: 50 mm
Control system: Weinig Nexus touchscreen
Weinig Unicontrol 12
-----
For sale on behalf of the customer at a favorable price
Includes tooling: Leitz IV 68/ IV 78 Wood, IV 68 Wood-Alu.
Machine will remain in operation until approx. end of October 2025
-----
Technical manufacturer’s description:
> Slot spindles: 2
> Profile spindles: 3
> Horizontal spindles: 3
> Max. workpiece length: 4,500 mm
> Max. workpiece width: 220 mm
Gsdpfx Ajw Hg T Dsgujkc
> Max. workpiece thickness: 120 mm
> Edge rounding unit
> Controlled horizontal spindle
> Separate gearbox groove spindle
> Slot spindle: 640 mm
> Profile spindle: 400 mm
> Automatic top transom support
> Synchronous-running spindle: 400 mm
> Gearbox groove spindle: 160 mm
> Total spindle stroke: 590 mm
> Spindle diameter: 50 mm
> Profile tool cutting circle: 140 mm
> Slotting tool cutting circle: 300 mm
> Infinitely variable spindle stroke
> Radial spindle adjustment: NC axis, pneumatic
> Electronically controlled length stop
> Tilted window capability
> Angle stop, miter compensation system
> Equipped for rebating
> Tear-out protection for rebating
> Automatic counter support
> Workpiece return system: longitudinal conveyor, turning station, cross conveyor
> Turning system
> Max. feed speed: 10 m/min
> Infinitely variable feed speed
> PC control
> Profile splitting
> Dual part package
> Weinig Nexus touchscreen
> Required space (length x width): 14.7 m x 12.7 m
-----
Including tooling: IV 68/ IV 78 Wood, IV 68 Wood-Alu.
-----
Price for the above machine on request!
-----
(Technical specifications as per manufacturer – no guarantee!)
All prices quoted are net, plus statutory VAT.
malý inzerát

718 km
Okenný systém
GUBISCHCW 2
Volať
Stav: použitý, Rok výroby: 1998, Slot spindle 1 pc.
Number of milling units: 4 pcs.
Spindle diameter: 50 mm
1 GUBISCH – CENTROMAT CW 2
Manufacturer’s description:
For window and door production, featuring a 50 mm spindle diameter for longitudinal profiling. Includes the following processing stations and capabilities:
- Single-sided slotting automaton for straight and angled joints
- Milling unit for longitudinal profiling
- Rebating operation with climb milling unit and automatic plunge function
- Tiltable frame support up to 650 mm
- Central control
1.0 Crosscut saw, automatic plunge from above
-----
Motor power incl. motor brake: 3.0 kW
Spindle speed: 2,800 rpm
Cutting diameter: 350 mm
Spindle diameter: 30 mm
Mounting flange, 1 driver 6 mm dia. TK 42, 120 mm dia.
Vertical stroke pneumatic: 100 mm
Horizontal stroke pneumatic: 160 mm
Against two manually adjustable 6-position revolver stops
Chip extraction hood with 100 mm extraction port
2.0 Slotting unit
-----
Motor power incl. motor brake: 9.2 kW
Spindle speed: 3,800 rpm
Cutting diameter: 320 mm
Spindle diameter: 50 mm
Usable spindle length: 320 mm
Vertical stroke pneumatically fixed: 2 x 100 mm
Gksdpfx Agjw I Eaweuec
Suitable for 3 tool sets à 100 mm
Zero height: 10 mm
Chip extraction hood with 160 mm extraction port
3.0 Slotting table
-----
Table height above floor: 920 mm
Feed with 4 freely adjustable speeds:
- 1. Milling/angled window/creep speed adjustable from operator panel (approx. 7 m/min)
- 2. Sawing speed approx. 7 m/min. (adjustable on device)
- 3. Transfer speed approx. 10 m/min. (adjustable on device)
- 4. Return speed/without machining approx. 25 m/min. (adjustable on device)
Motor power incl. motor brake: 0.37 kW
Workpiece clamping: pneumatically, with oscillating pressure shoes
Workpiece clamping: pneumatic
1 clamping cylinder with 2 additional pressure shoes
3.1 Counter block device: counter block changer with 2-position automatic exchange and, after manual rotation of 180°, 2 further counter positions possible, which can also be activated automatically
3.2 Length stop
-----
- Stop system with 3 scales for:
- a) Outer frame
- b) Sash upright outside
- c) Sash crosswise outside
Adjustment manual
Length with plug-on extension: 3000 mm
Tiltable for angled windows +/- 60 degrees
3.3 Angle transfer – automatic via vertically indexed feed roller in the milling feed
4.0 Milling automaton
-----
For longitudinal profiling and rebating of windows/doors with the following units:
4.1 First profiling milling unit
-----
- Conventional (counter) rotation
- Climb rotation (feed direction) with automatic plunge for rebating
- Motor power incl. motor brake: 9.2 kW
- Spindle speed: 6,000 rpm
- Cutting diameter: max. 240 mm
- Spindle adjustable for zero diameter: max. 140 mm; tools min. 112 mm
- Zero height: 10 mm
- Spindle diameter: 50 mm
- Usable spindle length: 320 mm
- Vertical stroke pneumatically fixed, suitable for 4 tool sets of 80 mm, 3 x 80 mm
- Horizontal stroke pneumatic: 80 mm
- Chip extraction with 140 mm extraction port
4.2 Second profiling milli...
Uľahčíme vám hľadanie
Okamžite a bezplatne dostanete nové ponuky e-mailom.
Vyhľadávaciu úlohu môžete kedykoľvek jednoducho ukončiť.