Briketovací lis / lis na brikety

mütek Systemtechnik MPP 110

Production time for the machine is approx. 3.5 months

Very robust machine with high pressing force
- suitable for producing a marketable briquette quality* depending on the material. The generously sized pressing cylinder and the 65 mm briquette diameter make this possible.

Our best-selling briquetting press series
+ Proven, simple technology for extremely low susceptibility to faults
+ 25 years of experience, ongoing development, and know-how
+ Several thousand machines in operation with satisfied customers
+ Excellent price-performance ratio

Options:

Surcharge for cooling unit + €3,995 net (can also be retrofitted later)
* Cools the pressing tongs (important after 3.5 hours) and the hydraulic oil
* Cooling unit recommended for continuous operation of more than 3.5 hours at a time.

Large pre-compaction chamber + €1,975 net
Recommended for light starting materials such as planer shavings
Gujdpfsffh Atex Ak Tji

Commodity code: 84793010
Briquette diameter: 65 mm
Front bush: 65 mm
Maximum briquette stroke: 50 mm
Optimal briquette stroke: 50 mm
Performance (material-dependent): up to 110 kg/h*
Last test approx. 87 kg/h
*Depending on bulk density
*Based on a bulk density of 200 kg per cubic meter
.
Motor rating: 5.5 kW
400 Volt / 50 Hz / 3-phase
Length: 1925 mm
Width: 1100 mm
Height: 1500 mm
Weight: 800 kg
Oil capacity: 110 liters
Silo diameter: 1000 mm
Silo volume: approx. 0.7 m³
Pump: 37 liters
Hydraulic pre-compactor
Cooling option for the pressing tongs: yes, with special accessory—coolable tongs
Cooling of the pressing tongs via external water tank (to be supplied by the customer)
Hydraulic oil cooling option: yes
Fill level monitoring option: yes
Briquette strand option: yes (depending on material)
CE compliant
.
Requirements for the raw material:
- Moisture content (atro) should be at least 6% and maximum 18%
- Maximum chip length: 15 mm
- Installation temperature: temperature-controlled room, at least +5°C
- The feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to pressing tools and/or increased wear may occur as a result

Inzerát bol automaticky preložený. Chyby v preklade sú možné.