Debus Dds 118 kúpiť použité (807)

Stav: nový, číslo stroja/vozidla: e763c8c2bb3370bd2342236a4, pohotovostná hmotnosť: 3 kg, maximálna hmotnosť nákladu: 8 kg, celková hmotnosť: 11 kg, konfigurácia náprav: 2 nápravy, veľkosť pneumatiky: 235 / 75 r 17,5, Further Information Chassis Center Axle Tipping Trailer Steel welded construction with continuous tipping shaft at the rear, featuring 80 mm spherical tipping bearings. Djdpfx Aloi Rizbeyjut Front gearbox support leg 2 wheel chocks with holders Steel underride guard Lockable storage compartment for ramps underneath the loading platform Central axle trailer coupling drawbar fitted with certified 40 mm towing eye drawbar height adjustable by spindle, max. adjustment range 300 mm Axles & Suspension Euro axles (manufacturer’s choice) with tapered roller bearings and S-cam brakes Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalizer (rocker compensation) Wheels and Tyres 235 / 75 R 17.5 tyres (manufacturer’s choice) Steel rims, factory silver Braking system 2-line compressed air brake system. Colour-coded piping for easy maintenance. Manual spindle parking brake Integral air reservoir No ABS, but equipped with mechanical load-sensing valve (ALB), thus max. 60 km/h approval 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle Electrics 12 Volt, multi-chamber rear lights, without side yellow LED lighting, side reflectors 2 white front position lights 2 white/red lane marker lights at rear 1 x 7-pin 12 Volt connector at front, approx. 60 cm extended connection cable Hydraulics Three-way tipper body, hydraulic multi-piston ram with stroke limiter and safety cable, Low pressure cylinder up to max. 170 bar, without throttle. If required, throttle must be retrofitted to the truck. Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Operated hydraulically via truck PTO Tipping Platform Robust tipping platform, 4 mm steel floor, steel side walls, continuous, fold-down and swinging, lower central locking. Removable rear corner posts. Rear wall fold-down and swinging, lower central locking. Platform length approx. 4,500 mm, side walls with 5 hinges at the bottom. Platform width 2,420 mm 5 pairs of lashing rings recessed into floor, each rated 5 t Operating Notes The maximum permissible gross weight stated is technically possible; depending on the load, the gross weight may not be achievable while complying with permissible axle, support, and kingpin loads. (Poor driving or tracking behaviour possible due to incorrect load distribution) Country of Registration / Plates Country of registration: Germany including Dekra inspection and certificate, for max. 60 km/h approval, towing vehicle LoF (max. 40 km/h approval possible for Switzerland) prepared for single-line number plate holder without contour marking / reflective stripes per ECE R 048 Paintwork Frame hot-dip galvanised incl. passivation, 15-year warranty against rust-through Side walls/platform RAL 3002 Carmine Red Note! If platform is galvanised, it will not be painted! Note! Platform interior is only primed! Wide profile tyres available at extra cost: 355 / 60 R 18, then loading height approx. 980 mm Attention: Archive images!

Stav: nový, číslo stroja/vozidla: a3b1347da4aa7f31dceb875db, pohotovostná hmotnosť: 2 kg, maximálna hmotnosť nákladu: 9 kg, celková hmotnosť: 11 kg, konfigurácia náprav: 2 nápravy, veľkosť pneumatiky: 235 / 75 r 17,5, Further information Chassis central axle trailer Fine-grain steel welded construction 6 pairs of lashing rings bolted on the exterior floor/outer frame, each rated at 5t Gear support leg at the front Foldable rear support 2 wheel chocks with holders Steel underride guard Full-width rear spray flaps Quarter-shell mudguards Central axle trailer towing device Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles + suspension BPW drum brake axles Axle/chassis laser alignment (reduces tire wear and fuel consumption) Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker equalization) Wheels and tires 235 / 75 R 17.5 (manufacturer's choice) Factory silver steel rims Brake system Dual-line air brake system Manual spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front with connection lines to the towing vehicle ABS and ALB, with ABS socket at the front, with connecting cable Note: The trailer may only be towed by tractor vehicles that ensure the functionality of the ABS! Electrics 24 Volt, multi-chamber lights, side-mounted amber LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable Floor Steel/chequer plate floor, designed for high point loading Note: Slight floor rippling due to welding distortion possible! Platform length approx. 5200 mm Rear ramped section approx. 900 mm Front wall / front corner stakes 25 mm aluminium hollow profile, 320 mm high Sidewalls 25 mm aluminium hollow profile, 320 mm high, foldable and removable Rear wall / rear corner stakes 1 pair of steel stakes fixed to the frame with holder for securing loading ramps, entry width approx. 2430 mm Loading ramps 2 steel ramps, 2300 mm long, 510 mm wide, laterally adjustable with a grab handle on each ramp Wooden deck Gas pressure springs for one-person operation Dusdji Ri Iljpfx Alyot Operating notes The specified gross weight is technically possible; depending on the type of load, the total weight may not be achievable while complying with permissible axle, support, and saddle loads. (Poor driving or tracking may result from incorrect load distribution) Country of registration/plates Registered in: Germany With Dekra approval and certification (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame: DB 7350 Novagrau. 10-year anti-corrosion warranty Front wall: aluminium Side walls: anodized aluminium Loading ramps: hot-dip galvanized Note: Archive images!

Stav: nový, číslo stroja/vozidla: bdf30cb8a53c70e900bdb40a7, pohotovostná hmotnosť: 2 kg, maximálna hmotnosť nákladu: 9 kg, celková hmotnosť: 11 kg, konfigurácia náprav: 2 nápravy, veľkosť pneumatiky: -, Further Information Chassis Central Axle Tipper Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical tipping bearing Front gearbox support leg 2 wheel chocks with holder Steel underrun protection Full-width rear mudflaps Quarter shell wheel arches Lockable storage compartment for drive-on ramps beneath the loading platform Central axle trailer drawbar Duedpfji Riwijx Alyst Drawbar with certified 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + Suspension BPW drum brake axles Axles/chassis laser aligned for reduced tyre wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization (rocker balance) Wheels and Tyres 235 / 75 R 17.5 Manufacturer’s choice Factory silver steel rims Braking System 2-line compressed air braking system. Colour-coded hose routing for easy service. Hand spindle parking brake Integral air reservoir ABS and ALB, with ABS plug on the front, with connection cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 foolproof coupling heads at the front, with connecting lines to the truck Electrics 24 Volt, multi-chamber lamps, yellow LED side lighting 2 white front position lights 2 white/red rear marking lights 2 x 7-pin foolproof plugs at the front, with connection cable Hydraulics Three-way tipping system, hydraulic multi-piston press with lift limit and safety cable, Low pressure cylinder up to max. 170 bar, without restrictor. If required, this must be retrofitted on the truck. Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Operated hydraulically via truck PTO Tipper Body Robust tipping body with 4 mm steel floor plate, steel side wall construction, continuous side walls, foldable and pendulum mounted with central locking below. Rear corner posts removable. Rear wall foldable and pendulum mounted, with central locking below. Platform length approx. 4,500 mm, side walls with 5 bottom hinges. Platform width 2,420 mm 5 pairs of lashing eyes in the floor, each rated for 5 tonnes Operating Notes The specified gross weight is technically possible, but depending on the cargo, the permissible gross weight may not be achievable due to axle, support or fifth-wheel load limits. (Poor driving and tracking performance may occur due to incorrect load distribution) Registration/Country of Approval/Plates Country of approval: Germany With Dekra inspection and report (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape according to ECE R 048, white on sides and red at rear Paintwork Frame hot-dip galvanized incl. passivation 15-year warranty against rust-through Side walls/body RAL 3002 Carmine red Rear supports, loading ramps, and storage box available as extras at additional cost Note: Archive images

Stav: veľmi dobrý (použitý),

Stav: použitý, Rok výroby: 2007, Funkcionalita: plne funkčný, šírka brúsenia: 940 mm, brúsna výška: 150 mm, – rok výroby: 2007 TECHNICKÉ PARAMETRE: – šírka brúsenia: 940 mm – výška brúsenia: 150 mm – min. hrúbka dielca: 0,8 mm – min. dĺžka dielca: 230 mm – výkon posuvného motora: 0,25 HP – hlavný motor: 5,55 kW Dujdew Ip Rtjpfx Alyot – brúsne valce: 2 x ø 152 x 940 mm – otáčky: 1400 ot/min – rýchlosť posuvu: 2 alebo 3 m/min – priemer odsávacieho hrdla: 2 x ø 100 mm – výkon motora: (400 V) 5600 W / S1 100% – rozmery (d/š/v): 1090 / 1420 / 1090 mm – hmotnosť: 440 kg

Stav: nový, číslo stroja/vozidla: e77e603e96d0ea4194a7f7661, pohotovostná hmotnosť: 3 000 kg, maximálna hmotnosť nákladu: 8 800 kg, celková hmotnosť: 11 800 kg, konfigurácia náprav: 2 nápravy, veľkosť pneumatiky: 235 / 75 r 17,5, Ďalšie informácie Podvozok centrálneho nápravového prívesu Zvarená konštrukcia z jemnozrnnej ocele 5 párov vonkajších upevňovacích ôk v podlahe/rámci, skrutkovaných, každé na 3 tony 2 páry upevňovacích ôk navyše, skrutkované do podlahy, každé v rohoch na 5 ton Podpera prevodovky vpredu Sklopná zadná podpera 2 zarážky kolies s držiakom Ochrana proti podbehnutiu, pozinkovaná oceľ Zadné blatníky na celú šírku so zástierkami Štvrťškrupinové blatníky Zariadenie na ťahanie centrálneho nápravového prívesu Ťažné oje so skúšaným 40 mm ťažným okom Ťažné oje nastaviteľné výškovo pomocou vretena, max. rozsah nastavenia 250 mm Nápravy a pruženie Tromlové brzdy GFA alebo BPW Laserom kalibrované nápravy/podvozok na zníženie opotrebenia pneumatík a spotreby paliva Parabolické pruženie s bezúdržbovým oceľovo-gumeným uložením a mechanickým vyrovnávaním zaťaženia nápravy (kolískový vyrovnávač) Kolesá a pneumatiky 235 / 75 R 17,5 voľba výrobcu Duedji Riv Topfx Alyst Oceľové disky v továrenskej striebornej farbe Brzdový systém 2-okruhový tlakovzdušný brzdový systém Ručná parkovacia brzda s vretenom Integrovaný vzdušník 2 vzájomne nezameniteľné spojovacie hlavy vpredu s prepojovacími potrubiami pre ťažné vozidlo, ABS a ALB, konektor ABS vpredu, s prepojovacím káblom Pozor: Prípojné vozidlo smie ťahať len ťažné vozidlo, ktoré zabezpečuje správnu funkciu ABS! Elektrická výbava 24 Voltov, viackomorové svetlá, bočné žlté LED osvetlenie 2 predné biele pozičné svetlá 2 zadné bielo/červené kontúrové svetlá 2x 7-kolíkové vzájomne nezameniteľné konektory vpredu, s prepojovacím káblom Podlaha Oceľová/ryhovaná podlaha pre vysoké bodové zaťaženie Poznámka: Ľahké vlny na podlahe v dôsledku zváracieho napätia sú možné! Dĺžka ložnej plochy cca. 5 200 mm Čelník / rohové stĺpiky vpredu 25 mm hliníkový dutý profil, 320 mm vysoký, rohové stĺpiky z ocele, vo veľkoobjemovom prevedení Boky 25 mm hliníkový dutý profil, 320 mm vysoký, sklopné a odnímateľné, delené s 1 párom nasadzovaných stredových stĺpikov Zadná stena / rohové stĺpiky vzadu 1 pár oceľových stĺpikov pripevnených na ráme s držiakom na zafixovanie nájazdových rámp, šírka prejazdu cca 2 430 mm Nájazdové rampy 2 oceľové rampy, 3 100 mm dlhé, 510 mm široké, pozdĺžne delené, bočne posuvné, so záchytnou rúčkou na rampách s drevenou výplňou plynové vzpery pre obsluhu jednou osobou Prevádzkové pokyny Uvedená celková hmotnosť je technicky možná, v závislosti od druhu nákladu nemusí byť možné dosiahnuť celkovú hmotnosť pri dodržaní prípustných zaťažení náprav/podpory a sedlovej časti. (Možná zhoršená jazda alebo vedenie prívesu v dôsledku nesprávneho rozloženia zaťaženia) Krajina schválenia / ŠPZ Krajina schválenia: Nemecko s Dekra technickou kontrolou a odborným posudkom (podľa §13 EG-FGV) 24/7 servisná linka pripravené pre jedno-riadkový držiak ŠPZ Obrysové značenie reflexnými pásmi podľa ECE R 048, bočne biele a vzadu červené Lakovanie Rám DB 7350 Novagrau, 10-ročná záruka proti korózii Čelník/bočné steny eloxovaný hliník, stredový stĺpik DB 7350 Novagrau Nájazdové rampy žiarovo pozinkované Upozornenie: Ilustračné fotografie!

Stav: použitý, Gear motor, electric motor Duedpfsc R R Anex Alyot - Speed: 118 rpm - Power: 0.15 kW - Design: B3, right angle - Shaft diameter: Ø 20 mm - Protection class: IP 44 - Brake - Quantity: 1x motor available - Price: per unit - Dimensions: 400/200/H200 mm - Weight: 12.5 kg

Stav: použitý, Dopravník, pásový dopravník, transportný pás, pásový dopravník, triediaci pás, triediaci dopravník, triediaci pásový dopravník -Bočné steny z: nehrdzavejúcej ocele -Rýchlosť: 118 m/min -Pohon: 0,75 kW Duodpfx Aeffukrelyet -Šírka pásu: 590 mm -Dĺžka: 2000 mm -Prepravné rozmery: 4360/1170/V1170 mm -Hmotnosť: 684 kg

Stav: veľmi dobrý (použitý), Pílový kotúč, kotúč na drevo, kotúč na okružnú pílu, kotúč na kovovú okružnú pílu, kotúč z tvrdokovu, segmentový kotúč na okružnú pílu - Pílový kotúč: Ø 800 x 8 mm - Vnútorný priemer: Ø 80 mm - Rozstup skrutiek (PCD): Ø 120 x 22 mm / Ø 160 x 26 mm - Počet zubov: 118 Duodpfx Aljvy Umtoyot - Hmotnosť: 20 kg

Stav: dobrý (použitý), Prevodový motor, elektromotor, elektroprevodový motor, kužeľový prevodový motor - Výrobca: SEW-Eurodrive, prevodový motor s brzdou Dodpfx Alsik Adceysut - Typ: RF07 DR63M4/BR - Otáčky: 118 ot/min - Výkon: 0,18 kW - Dutý hriadeľ: Ø 35 x 180 mm - Krytie: IP54 - Brzda: 3,2 Nm - Rozmery: 395/118/V165 mm - Hmotnosť: 8,4 kg

Rok výroby: 2007, stav: použitý, typ paliva: elektrický, Hydraulická pumpa, olejové čerpadlo, hydraulická jednotka, hydraulické čerpadlo, elektromotor, stejnosměrný motor, pojízdný motor, hnací motor, hydraulické zubové čerpadlo - Výrobce: HPI, hydraulická pumpa z komisního vysokozdvižného vozíku typu ECE 118 - Hydraulická pumpa: typ 50125677 - Motor: typ AU3480 AMJ5729 24 V 1,5 kW Dodpsiz Dtvofx Alyeut - Včetně: nádrže a řídicího ventilu - Množství: 4x jednotka k dispozici - Cena: za kus - Rozměry: 200/180/V370 mm - Hmotnost: 10 kg/kus

Stav: dobrý (použitý), Grinding drum, deflection drum, belt sanding machine, belt sander, drum sanding machine, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers - Manufacturer: KED Kurt Ehemann, grinding drum drum width 250 mm - Drum: Ø 118 mm - Bore: Ø 30 mm Dodovxp Ddjpfx Alyjut - Quantity: 2x drums available - Price: per piece - Dimensions: Ø 118 x 310 mm - Weight: 9.7 kg/pc.

Stav: použitý, nastaviteľný prevodový motor, meniteľný prevodový motor, elektromotor - Výrobca nastaviteľnej prevodovky: Lenze Typ: 155-ZNA0-80-4 - Výrobca motora: Dietz Typ: D48L - Výkon motora: 0,75 kW - Rozsah otáčok: 21-118 ot./min. - Motor: nastaviteľný - Výška osi hriadeľa: 120 mm - Počet: 1 kus k dispozícii - Cena: za kus - Hnací hriadeľ: Ø 25 mm - Rozmery: 390/400/V250 mm Dusdjchbv Hopfx Alyst - Hmotnosť: 31 kg

Stav: dobrý (použitý), Rok výroby: 2007, Hlava oja, ojazdový vysokozdvižný vozík, ručný paletový vozík s ojou, oje, riadenie, elektrický ručný paletový vozík -Výrobca: Jungheinrich, kompletné oje s pohonom z elektrického vozíka ECE 118 -Pohon: 24 VDC / 1,6 kW -Jednotlivé komponenty: pozri fotografie Dusdpfxsiz Dr Ae Alyst -Počet: k dispozícii 4 oje -Predaj/cena: za kus -Rozmery: 1530/480/H290 mm -Hmotnosť: 87 kg/kus.

Stav: dobrý (použitý), Grinding drum, deflection drum, belt grinding machine, belt grinder, drum sanding machine, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller track, carrying rollers -Manufacturer: KED Kurt Ehemann, grinding drum, drum width 330 mm -Drum: Ø 118 mm -Bore/shaft: Ø 30 mm -Quantity: 2 drums available -Price: per piece -Dimensions: Ø 118 x 385 mm -Weight: 11.3 kg/pc. Dusdpsvxp Hxjfx Alyot

Stav: veľmi dobrý (použitý), Rok výroby: 1972, Total power requirement: 22 kW Machine weight: approx. 8 t OFFER We can offer you the following from stock, subject to prior sale and errors, and without obligation: DISKUS Vertical Double Disc Grinding Machine in C-frame design with rotary table workpiece feed and automatic dressing unit Model: DDS 600 RAM Year of construction: 1972 / modernised in 2002 # 6967 _____ Grinding wheels – Ø each: 600 mm Grinding wheel bore / height approx.: 75 / 150 mm Grinding wheel speed Upper grinding wheel: 95 - 955 rpm (3-30 m/s) Lower grinding wheel: 765 rpm (24 m/s) Grinding spindle drive: 22 kW each Workpiece: Grinding width (or workpiece diameter): 20 – 120 mm Grinding height (workpiece height): 50 mm tell increments: 0.0025 - 0.05 mm Total infeed travel: 150 mm External Ø / pitch circle of transport disc approx. 810 / 750 mm Rotary feed system, infinitely variable feed: 25 – 241 mm/s Total drive approx. 50 kW / 380 V / 50 Hz Weight approx. 8,000 kg Accessories / Special features • IONIC measuring and control system Model 17 A renewed in 2002 with display, direct entry of grinding data, part counter, tolerance counter, limit monitoring, and statistics generation. Workpiece tolerances are continuously registered by probe heads, with hydraulic infeed of the grinding heads as preset via this control unit. • Automatic workpiece thickness measurement after grinding and mechanical workpiece height measurement • Inspection before workpiece entry to prevent grinding wheel crash • Automatic hydraulic dressing unit between the two grinding wheels for simultaneous dressing according to a preset dressing cycle (by number of workpieces / time), including hydraulic return of the upper grinding carriage to the preset grinding position or dimension • Workpiece rotary table unit with carrier disc (810 mm Ø) and stepless speed control • Hydraulic grinding wheel infeed via jog mode • ELBARON oil mist extraction with stand and adjustable extraction cone Duedoxqrbxjpfx Alyst • Walk-on operator platform for easy operation and monitoring • Grinding wheel changing rack, various grinding wheels included • Central lubrication, separate control cabinet, separate hydraulic unit This machine is particularly suitable for simultaneous, plane-parallel grinding of workpieces in large batches. Examples include: washers, piston rings, hydraulic components, clock components, stamped parts, etc. Condition: Good to very good! Please click here for a video of the machine. Delivery: From stock, immediately available, FCA Metzingen Payment: net – upon receipt of invoice

Rok výroby: 1992, stav: použitý, Grinding height: 50 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Total power requirement: 85 kW Machine weight approx.: 9,500 kg D I S K U S CNC-controlled vertical double-sided surface grinding machine with rotary workpiece feed and IONIC measurement control. Type: DDS 600 III PRM - CNC Dusdpfot Hw Naex Alyst Year of manufacture: 1992 # 7924 _____ Grinding wheel dimensions (each): 600 x 150 x 75 mm (height) Workpiece data: Grinding height approx.: 1.5 – 50 mm Grinding width approx.: 20 – 120 mm Spindle vertical adjustment (each): approx. 150 mm CNC-controlled grinding wheel infeed: 0.0001 mm Workpiece transport device feed rate, stepless: 40 - 235 mm/sec Grinding wheel speed (each, 30 m/s): 191-955 rpm Grinding spindle drive, infinitely variable (each): 37 kW Total power: approx. 85 kW/380 V/50 Hz Weight: approx. 9,500 kg Accessories / Special equipment • SIEMENS CNC control SINUMERIK 810 G with monitor, for 4 axes (upper and lower infeed, dressing unit, and workpiece rotation), direct input of all grinding parameters, plus • IONIC measuring control No. 17 A with 2 measuring probes for scanning workpieces after the grinding cycle, triggers appropriate infeed of the grinding wheels, continuous measurement results on monitor for statistics, workpiece counting, etc. • Digital display of power consumption (amperes) for drive motors and grinding wheel speed • Portal design for greater stability and increased grinding accuracy • Rotary workpiece transport with stepless rotational speed adjustment as the 4th axis • Position monitoring unit to supervise the vertical position of the lower grinding wheel • 2 adjustable workpiece hold-downs at infeed and outfeed, each with height monitoring, simple stacker for raw parts, and outfeed of finished parts via conveyor belt • Semi-inclined, laterally mounted grinding wheel dressing device with pre-programmable dressing cycle, integrated as a CNC axis in the control, with safety shut-off • Large separate electrical cabinet, automatic central lubrication, sophisticated pneumatic system • Large PROMATEC (F) coolant system with filtration and magnetic separator • Various grinding wheels, flanges, several table segments, transport discs, large fume extraction system, etc. This machine is particularly suitable for simultaneous, parallel surface grinding of workpieces in large-scale production, such as stamped parts, piston rings, hydraulic components, etc. Condition: Good to very good – ready for demonstration soon Delivery: Ex stock – as inspected Payment: strictly net – upon receipt of invoice This is a very rare opportunity in terms of both condition and price. If you require a different grinding machine – especially from DISKUS – please contact us with your inquiry.

Stav: použitý, Rok výroby: 1969, Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: mm Workpiece height: 60 mm Total power requirement: 50 kW Dodpfx Aljt Hw N Hsyout Machine weight approx.: 7,000 kg Space requirement approx.: m D I S K U S Vertical double-sided surface grinding machine in C-frame design and with rotary table workpiece feed Model: DDS 600 CRA Year of manufacture: 1969 Serial no.: 6672 Grinding wheels – diameter x bore each: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc, outer Ø: 810 mm Workpiece: Max. grinding height x grinding width approx.: 60 x 120 mm Vertical adjustment of quills, each approx.: 150 mm Hydraulic infeed pulses for depth feed: 0.0025 – 0.05 mm Outer diameter of the transport disc approx.: 810 mm Rotary table feed, continuously variable: 14 – 145 mm/s Grinding wheel speed each approx.: (24 m/s) / 765 rpm Grinding spindle drive each: 22 kW Total drive approx.: 50 kW / 380 V / 50 Hz Total weight approx.: 7,000 kg Accessories / Special Equipment • Workpiece rotary device for round workpiece transport discs with corresponding slots for loading parts and with automatic ejection of finished parts onto a chute into a transport box. • IONIC measuring control No. 9 So with probe for measuring the ground workpiece height and, if required, with automatic hydraulic grinding wheel infeed. • Continuous speed control of the rotary device according to grinding dimension and workpiece. • Manual grinding wheel infeed via corresponding buttons • Hydraulically swiveling dressing unit (RA) between the two grinding wheels for simultaneous dressing of both grinding wheels with corresponding compensation and automatic repositioning to the effective workpiece thickness after dressing = high time savings, can be manually triggered as well as via a timer. • Ampere meters for both grinding spindle drives * Central lubrication • Mechanical height control of the workpieces with machine shut-off in case of overheight • Free-standing control cabinet, separate hydraulic unit, separate large band filter unit, various grinding wheels, various transport discs, etc. This machine is particularly suitable for simultaneous, parallel surface grinding of workpieces in large series. For example: washers, piston rings, hydraulic parts, clock parts, stamped parts, etc. Condition: good – will be ready for demonstration soon Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stav: vyžaduje opravu (použité), Rok výroby: 2008, číslo stroja/vozidla: 118009950, Funkcionalita: nefunkčný, dĺžka posuvu os X: 2 450 mm, dĺžka posuvu osi Y: 350 mm, dĺžka posuvu osi Z: 280 mm, maximálna rýchlosť vretena: 18 000 ot./min, Žiadna minimálna cena – zaručený predaj najvyššiemu ponúkajúcemu! Stav: Stroj bol pravidelne servisovaný, aktuálne však vykazuje softvérovú chybu. TECHNICKÉ ÚDAJE Pojezdová dráha osy X: 2 450 mm Pojezdová dráha osy Y: 350 mm Pojezdová dráha osy Z: 280 mm Posuvová rýchlosť: 30 / 15 / 15 m/min VRETENO Otáčky vretena: 18 000 ot./min Výkon vretena: 3 kW PRACOVNÝ OBLAST Max. dĺžka obrábania: 2 400 mm STLAČENÝ VZDUCH Pripojenie na stlačený vzduch: 7 bar TECHNICKÉ PARAMETRE STROJA Dĺžka: 3 100 mm Šírka: 1 650 mm Výška: 2 250 mm Duedjwu Ekqjpfx Alyet Hmotnosť: 1 227 kg Napätie: 400 V, 3~, 50 Hz Príkon: 8 kW

Stav: generálne opravený (použitý), Rok výroby: 2014, prevádzkové hodiny: 2 187 h, nosnosť: 1 800 kg, zdvíhacia výška: 122 mm, ťažisko nákladu: 600 mm, typ paliva: elektrický, typ stožiara: simplex, stavebná výška: 1 350 mm, dĺžka vidlíc: 1 150 mm, pohotovostná hmotnosť: 334 kg, FRIEDMANN FORKLIFTS – FACTORY-REFURBISHED BY EXPERTS. BUILT FOR PROFESSIONALS IN ACTION Our forklifts are completely overhauled to comply with FEM-4.004 and current safety standards – ensuring maximum quality and safety. From the frame to the battery, including drivetrain, brakes, steering, and electrics – every vehicle undergoes thorough inspection and refurbishment. ✔ Made in Germany – with dedication and precision ✔ Rigorous technical inspection ✔ 400+ vehicles in stock ✔ Worldwide shipping & customs handling ✔ Service & spare parts at fair prices ✔ Personal support – even after your purchase Test and get advice on-site now – we’ll find the right solution for you. Industrial Truck Specifications: Manufacturer: Jungheinrich Model: Low-lift Pallet Truck EJE 118 Drive type: Electric Load capacity: 1,800 kg Dodpfxjxnk D Hj Alyjut Year of manufacture: 2014 Operating hours: 2,187 Lift height: 122 mm Mast type: None Initial lift: Yes Overall length: 1,800 mm Overall width: 800 mm Overall height: 1,350 mm Fork length: 1,150 mm Unladen weight: 334 kg Load centre: 600 mm Tyres: Polyurethane Model type: EJE 118 Battery type: PzS Battery weight: 222 kg

Stav: pripravené na použitie (použité), Indramat DDS 2.1-A200-D digitálny regulátor AC, sériové číslo podľa fotografie, použitý, bežné známky používania, 100% funkčný, dodáva sa podľa fotografií. Dedpfx Aoi Ebfiolyout

Stav: pripravené na použitie (použité), Indramat DDS 2.1-F150-D digitálny AC servoregulátor, použitý, 100#5 funkčný Duedsi Ebfuopfx Alyet

Stav: pripravené na použitie (použité), Indramat DDS 2.1-W050-DS01-01 digitálny AC servopohon, SN 263500-16655, použitý, škrabance na prednom paneli, inak dobrý stav, 100% funkčný Dusdpfx Alerly Sgoyot

Stav: pripravené na použitie (použité), Indramat DDS 2.1-A200-D Digitálny AC servo regulátor, sériové číslo podľa fotografie, používaný, bežné známky používania, 100% funkčný, dodávka podľa fotografií Djdpfx Alei Ebfmjysut

Stav: pripravené na použitie (použité), Indramat DDS 2.1-A200-D digitálny AC servopohon, sériové číslo podľa fotografie, použitý, bežné známky používania, 100 % funkčný, dodáva sa podľa vyobrazenia. Dodei Ebfqspfx Alyout