Práškové Zariadenie kúpiť použité (13 929)
Zoradiť výsledky
- Najnižšia cena Najvyššia cena
- Najnovšie inzeráty Najstaršie inzeráty
- Najkratšia vzdialenosť Najväčšia vzdialenosť
- Najnovší rok výroby Najstarší rok výroby
- Najnovšia aktualizácia Najstaršia aktualizácia
- Výrobcovia od A po Z Výrobca od Z po A
- Relevantnosť
- Najnižšia cena
- Cena
- Najvyššia cena
- Cena
- Najnovšie inzeráty
- Dátum pridania
- Najstaršie inzeráty
- Dátum pridania
- Najkratšia vzdialenosť
- Vzdialenosť
- Najväčšia vzdialenosť
- Vzdialenosť
- Najnovší rok výroby
- Rok výroby
- Najstarší rok výroby
- Rok výroby
- Najnovšia aktualizácia
- Aktualizácia
- Najstaršia aktualizácia
- Aktualizácia
- Výrobcovia od A po Z
- Výrobca
- Výrobca od Z po A
- Výrobca
- Označenie od A po Z
- Označenie
- Označenie od Z po A
- Označenie
- Model od A po Z
- Model
- Model od Z do A
- Model
- Najnižšia referencia
- referencia
- Najvyššia referencia
- referencia
- Najkratšia doba prevádzky
- Prevádzková doba
- Najdlhšia doba prevádzky
- Prevádzková doba
- relevantnosť
- relevantnosť
Malý inzerát
Nemecko
604 km
Upínacie zariadenie Upínacie pazúry
Rottler
Zavolať
Stav: použitý, Technical details:
Dimensions: 420 x 400 x 400 per jaw (mm)
The following clamping claws are for sale.
Dimensions per clamping claw: L: 420 x W: 400 x H: 400 mm
Clamping surface: 80 x 80 mm, double-sided clamping
Clamping stroke: approx. 120 mm
Clamping width: flexible
Mounting:
- Base area L x W: 420 x 340 mm
Bedpeu N E D Ssfx Adijlh
- Clamping holes: 6 pieces, diameter Ø 40 mm
Malý inzerát
Nemecko
604 km
Zahýbací stroj-predmontážne zariadenie
EOCnicht bekannt
Zavolať
Stav: použitý, Technické detaily:
Priemer rúrky: viď o mm
Hrúbka steny: viď o mm
Napätie: 230 V / 1 fáza V
Celkový príkon: 0,55 kW
Hmotnosť stroja cca: 56 kg
Rozmery D x Š x V: 0,45 x 0,37 x 0,35 m
Bledpfxou Icu Sj Adish
PREDMONTÁŽNE ZARIADENIE NA HYDRAULICKÉ POTRUBIE pre EO rúry
Použitie na lisovanie prírubových spojov na hydraulických potrubiach.
Lisovanie bežných materiálov ako napr. oceľ (ST 35.4 NBK alebo ST 37.4 NBK alebo ST 52.4 NBK), nerezová oceľ (1.4571/1.4541/316Ti alebo podobné) a meď.
Ovládanie tlakom.
Na stroji je osadený nástroj na lisovanie príruby pre veľkosť Ø 14 mm.
Prevádzkový tlak je variabilne nastaviteľný.
Malý inzerát
Nemecko
604 km
Upínacie zariadenie
WMWdiverse
Zavolať
Stav: použitý, Technické detaily:
Hmotnosť stroja cca: na požiadanie kg
Tieto upínacie prostriedky sa predávajú za cenu na kg pri odbere celého množstva.
Prosím, venujte pozornosť označeniu na fotografiách!
Bsdpfx Adeu N D N Heijlh
*

Informujte sa teraz
+44 20 806 810 84
+44 20 806 810 84
Vložiť inzerát teraz
*za inzerát/mesiac
Malý inzerát
Nemecko
604 km
Upínacie zariadenie Upínacie pazúry
SEDIN STANKO
Zavolať
Stav: použitý, Technické detaily:
Hmotnosť: 150 kg
Rozmery: Dĺžka: 280 x Šírka: 240 x Výška: 180 mm / na jednu upínaciu pazúru
Bledsu N E Azjpfx Adijh
Na predaj sú tieto 4x upínacie pazúry.
Použitie ako upínače obrobkov pre sústružnícke a vŕtacie práce
Konštrukcia z liatej ocele
Upínacia plocha obrobku: Š x V: 70 x 65 mm, vnútorné a vonkajšie upínanie, upínacia dráha 250 mm
Upevnenie päty: plocha D x Š: 280 x 240 mm, 4x upínacia skrutka M24
Vybavenie: 4x rybinová skrutka na každú upínaciu pazúru a rašpľový kľúč pre štvorhran 24 mm
Malý inzerát
Nemecko
604 km
Frézovacie zariadenie
PERSKEDFN 907/4
Zavolať
Stav: použitý, Technické detaily:
Otáčky: 1390 ot./min
Výkon: 0,75 kW
Hmotnosť stroja cca: 360 kg
2 kusy vŕtacích a frézovacích vreten s elektro rozvádzačom.
Bodpsu Nk Euefx Adislh
Predaj v aktuálnom stave.
Malý inzerát
Nemecko
604 km
Zariadenie na kopírovanie
DIAFORMnicht bekannt
Zavolať
Stav: použitý, Technické detaily:
Základová deska: 210x110 mm
Hmotnost stroje cca: 60 kg
Potřebný prostor cca: 0,7x0,52x0,5 m
Kopírovací zařízení pro brusky pro tvarování brusných kotoučů (profilovací zařízení)
- Podélný posuv horního stolu = 60 mm (ručně)
- Příčný posuv = 20 mm
- Podstavec = cca 60 mm (s aretací)
- Rozměry šablonového stolu: 310x150 mm
Blsdpfx Aju Nuq Iedieh
Dobrý použitý stav.
Malý inzerát
Skarżysko-Kamienna
286 km
Piec na práškové lakovanie
ROMERCuring Oven SL Series
Zavolať
Rok výroby: 2025, stav: nový, Ceny vytvrdzovacích pecí zobrazených na fotografiách sa líšia v závislosti od veľkosti, konfigurácie a voliteľnej výbavy. 💡📏⚙️
V spoločnosti ROMER vyrábame štandardné modely aj plne zákazkové riešenia, prispôsobené podľa vašich požiadaviek na proces. 🏭✅
Informujte nás o požadovanej veľkosti dielov, kapacite linky, profile vytvrdzovania a dostupnom priestore – navrhneme optimálne riešenie a voliteľné vybavenie, ktoré skutočne zlepší každodennú prevádzku. 🔥🎯
🧠📡 Ovládanie a monitoring
Živé riadenie procesu: teplota, čas, prietok vzduchu a prevádzkové režimy – s alarmami a uloženými receptúrami pre opakujúce sa cykly. 🔁✅
🔥🧩 Ohrievací modul
Rýchly nábeh a stabilná teplota vďaka účinným výhrevným telesám a rýchlemu prenosu energie. ⚡🌡️
🌀💨 Obehové vzduchotechnika
Rovnomerný prietok vzduchu minimalizuje teplotné rozdiely a zvyšuje kvalitu povrchovej úpravy. 🎯✅
🧱❄️ Izolácia a konštrukcia
Inteligentná konštrukcia komory minimalizuje tepelné straty – rýchlejší nábeh na požadovanú teplotu, nižšia spotreba. ♻️📉
🛡️⚠️ Bezpečnosť a certifikácia
Senzory, blokácie a ochranná logika zvyšujú bezpečnosť a spoľahlivosť prevádzky. 🔒👷
⚡💰 Vysoká efektivita
Optimalizovaný prenos tepla a znížené straty znamenajú reálne úspory v prevádzke. 📉🔥
⏰🤖 Automatický nábeh
Programovateľný časovač – automatické predhriatie pred nástupom zmeny pre plynulejší rozbeh výroby. ⏱️✅
🚪🔒 Samozamykacie dvere + inteligentný komín
Zabraňuje nechcenému otvoreniu, komín pracuje iba v nevyhnutných režimoch pre vyššiu bezpečnosť. 🧯✅
🌿🔋 ECO režim
Energeticky úsporný pohotovostný režim – úspora paliva až 20 % (v závislosti od procesu). 🌱📉
👀💡 Kontrola a osvetlenie
Možnosť kontroly priebehu bez otvorenia dverí – menší teplotný pokles, jednoduchší dohľad. ✨👁️
Bjdpfsfx Nfmjx Adislh
🛤️🔥 Vodidlá a automatická kapota
Kapota aktívna iba pri nakládke znižuje tepelné straty, automatické podávanie koľajníc zlepšuje ergonómiu a rýchlosť obsluhy. 🙌⚙️
🎛️🌡️ MULTI-ZÓNA OHREV
Nezávislé riadenie zón pre rovnomerné vytvrdzovanie dielov rôznej hmotnosti a geometrie. 🧩✅
🧠♨️ Systém MTS
Výhrevné telesá bez tepelných mostov – vyššia účinnosť a rýchlejšie dosiahnutie nastavených parametrov. ⚡⏱️
2-v-1 🧱↔️🧱 Delená komora
Pohyblivá prepážka pre dve nezávislé zóny – sušenie a vytvrdzovanie v jednom zariadení, maximálna flexibilita. 🚀🔁
🎚️🌀 VFD ventilácia
Plynule regulovateľné otáčky ventilátora podľa podmienok v komore – lepšie riadenie a nižšia spotreba elektrickej energie. ⚙️💡
Malý inzerát
Skarżysko-Kamienna
286 km
Zariadenia na práškové lakovanie
ROMER-malowanie elektrostatyczneKompleksowe lakiernie proszkowe
Zavolať
Rok výroby: 2020, stav: nový, Transport Systems
Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements.
- For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors).
- In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability.
- For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution.
All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order.
In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems.
Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations.
Use of Photoelectric Sensors
The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings.
Above the carrier loop, there are plates with identification holes.
Bljdpfofz Dubox Adish
Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification.
By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components.
The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.
Malý inzerát
Skarżysko-Kamienna
286 km
Zariadenia na práškové lakovanie
ROMERSW- Elektrostatyczny system malowania
Zavolať
Rok výroby: 2020, stav: nový, 7-inch touch panel
Blodpfxofz Apqe Adijh
The large color touch panel makes parameter input even easier and more convenient.
5 programs with 50 steps each
It is possible to program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes.
Information about gas and oil consumption
Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate the consumption and cost of each firing process.
USB storage
Every firing process is logged, and the data can be transferred to a USB stick for analysis on a PC. Each file is automatically created for a single firing process, recording extreme temperatures and exact timing. Files are saved in *.csv (Excel spreadsheet) format. For all customers until the end of 2016, this feature is free of charge. At other companies, this can cost several thousand euros.
Storage of the last 20 firing processes
Is something wrong? Did too few items come out of the kiln? Now you can check the exact parameters of the firing process, such as duration or potential issues.
New! Timer
It is possible to set the start time, allowing the kiln to turn on automatically before the workday begins.
Made by professionals for professionals
Automatic smoke extraction
The smoke extraction system can be programmed to open a few minutes before the end of the firing process to vent smoke from the chamber. The smoke extractor can also be controlled via the touch panel.
Process duration timer
Using the heating dynamics, the process duration is calculated and the end time of the firing process is displayed.
Self-closing doors
To open, simply pull the door. To close, just push—it will close automatically.
Exhaust hood above the door (optional)
To minimize hall heating caused by opening the door, an exhaust hood can be installed above the door to remove hot air.
Partition wall (optional)
The partition wall is suitable for customers purchasing a large kiln who wish to use only part of the kiln. The oven is equipped with a movable partition wall and dedicated control system.
2 in 1 (optional)
It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.
Malý inzerát
Skarżysko-Kamienna
286 km
Automatické práškové kabíny
ROMER / Catalog prices
Zavolať
Rok výroby: 2020, stav: nový, Automation
Use of a photoelectric cell
Bjdpfoflq Spex Adiolh
The use of a photoelectric cell in the workpiece area enables you to measure the length of the workpiece, and consequently gives you the ability to activate the spray guns when the object is within range, and immediately deactivate them upon completion of the coating process. The photoelectric cell is included as standard equipment.
Identification of parts using special tags.
A plate with identification holes is placed over the suspension. On this basis, and in combination with the photoelectric cell, the PLC control system identifies the coated part, switches the spray guns on and off at the correct times, thereby saving both energy and powder.
Vertical detection of workpiece features.
By using light barriers with horizontal sensors, the PLC can analyze the vertical shape of the workpiece. The PLC counts the time when the part is expected to enter the spray zone, so that the guns can be switched on or off selectively.
Use of light barriers with multiple sensors (horizontal and vertical).
This solution allows accurate measurement of workpiece dimensions, enabling even manipulators to be precisely controlled.
Advantages of using light barriers and photoelectric cells
The main advantages of using photoelectric cells or light barriers are savings in both energy and powder. You can eliminate the unnecessary coating of areas where there are no parts present. With the use of light barriers, precise control of the guns is possible. Our lines can be optionally fitted with photoelectric cells or light barriers.
The use of a photoelectric cell in the workpiece area enables you to measure the length of the workpiece and thus provides the option to activate the spray guns when the object is within range and to immediately deactivate them after the workpiece is finished.
Identification of parts with special tags.
A plate with identification holes is placed over the suspension. On this basis, and in combination with the photoelectric cell, the PLC control system identifies the coated part, switches the spray guns on and off at the correct times—thereby saving energy and powder.
By using light barriers with horizontal sensors, the PLC can analyze the vertical shape of the workpiece. The PLC counts when the part appears in the spray booth, allowing for selective activation or deactivation of the guns.
Use of light barriers with multiple horizontal and vertical sensors
This solution allows for precise measurement of the workpiece's dimensions, enabling manipulators to be adjusted accordingly.
The main advantages of using photoelectric cells or light barriers are, first and foremost, savings in powder and energy;
elimination of coating in zones without any parts;
and, with the use of light barriers, highly accurate gun control.
Gun row vertical:
8 spray guns
Control unit – profiControl 10"
Cyclone – CK-D1250
Dust collector – OZ-8H
Center – RP-01 + SV-200
Manipulator MA1-23 x 2 units
Axis X MX-100 x 2 units
Horizontal gate – Horizontal gate W400 x 2 units
Vertical gate – Vertical gate H2000
Maximum coating speed: 1.65714285714286 m/min
0 towing units
Required air flow: 10,188 m3/h
Required min. cabin clearance: B900mm H2100mm
Pipe diameter: 500 mm – at least 16.9 m/s (16 m/s)
Air consumption: 1,210 l/min + suggestion: SC-20 compressor
Min. St
Malý inzerát
Skarżysko-Kamienna
286 km
Piec na práškové lakovanie
ROMERCuring Oven SW Series
Zavolať
Rok výroby: 2025, stav: nový, Ceny vytvrdzovacích pecí zobrazených na fotografiách sa líšia v závislosti od veľkosti, konfigurácie a voliteľnej výbavy. 💡📏⚙️
V spoločnosti ROMER vyrábame štandardné modely aj plne zákazkové riešenia, prispôsobené podľa vašich požiadaviek na proces. 🏭✅
Informujte nás o požadovanej veľkosti dielov, kapacite linky, profile vytvrdzovania a dostupnom priestore – navrhneme optimálne riešenie a voliteľné vybavenie, ktoré skutočne zlepší každodennú prevádzku. 🔥🎯
🧠📡 Ovládanie a monitoring
Živé riadenie procesu: teplota, čas, prietok vzduchu a prevádzkové režimy – s alarmami a uloženými receptúrami pre opakujúce sa cykly. 🔁✅
🔥🧩 Ohrievací modul
Rýchly nábeh a stabilná teplota vďaka účinným výhrevným telesám a rýchlemu prenosu energie. ⚡🌡️
🌀💨 Obehové vzduchotechnika
Rovnomerný prietok vzduchu minimalizuje teplotné rozdiely a zvyšuje kvalitu povrchovej úpravy. 🎯✅
🧱❄️ Izolácia a konštrukcia
Inteligentná konštrukcia komory minimalizuje tepelné straty – rýchlejší nábeh na požadovanú teplotu, nižšia spotreba. ♻️📉
🛡️⚠️ Bezpečnosť a certifikácia
Senzory, blokácie a ochranná logika zvyšujú bezpečnosť a spoľahlivosť prevádzky. 🔒👷
⚡💰 Vysoká efektivita
Optimalizovaný prenos tepla a znížené straty znamenajú reálne úspory v prevádzke. 📉🔥
⏰🤖 Automatický nábeh
Programovateľný časovač – automatické predhriatie pred nástupom zmeny pre plynulejší rozbeh výroby. ⏱️✅
🚪🔒 Samozamykacie dvere + inteligentný komín
Zabraňuje nechcenému otvoreniu, komín pracuje iba v nevyhnutných režimoch pre vyššiu bezpečnosť. 🧯✅
🌿🔋 ECO režim
Energeticky úsporný pohotovostný režim – úspora paliva až 20 % (v závislosti od procesu). 🌱📉
👀💡 Kontrola a osvetlenie
Možnosť kontroly priebehu bez otvorenia dverí – menší teplotný pokles, jednoduchší dohľad. ✨👁️
🛤️🔥 Vodidlá a automatická kapota
Kapota aktívna iba pri nakládke znižuje tepelné straty, automatické podávanie koľajníc zlepšuje ergonómiu a rýchlosť obsluhy. 🙌⚙️
🎛️🌡️ MULTI-ZÓNA OHREV
Nezávislé riadenie zón pre rovnomerné vytvrdzovanie dielov rôznej hmotnosti a geometrie. 🧩✅
Blodpfxefzb Rcj Adish
🧠♨️ Systém MTS
Výhrevné telesá bez tepelných mostov – vyššia účinnosť a rýchlejšie dosiahnutie nastavených parametrov. ⚡⏱️
2-v-1 🧱↔️🧱 Delená komora
Pohyblivá prepážka pre dve nezávislé zóny – sušenie a vytvrdzovanie v jednom zariadení, maximálna flexibilita. 🚀🔁
🎚️🌀 VFD ventilácia
Plynule regulovateľné otáčky ventilátora podľa podmienok v komore – lepšie riadenie a nižšia spotreba elektrickej energie. ⚙️💡
Malý inzerát
Skarżysko-Kamienna
286 km
Zariadenia na práškové lakovanie
ROMERKompleksowe lakiernie proszkowe
Zavolať
Rok výroby: 2020, stav: nový, Transport Systems
Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements.
- For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors).
- In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability.
- For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution.
All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order.
In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems.
Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations.
Bedpofz Dt Nsfx Adijlh
Use of Photoelectric Sensors
The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings.
Above the carrier loop, there are plates with identification holes.
Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification.
By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components.
The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.
Malý inzerát
Skarżysko-Kamienna
286 km
Zariadenia na práškové lakovanie
ROMER /Automatyczna liniaAutomat
Zavolať
Rok výroby: 2020, stav: nový, Transport Systems
Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements.
- For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors).
- In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability.
- For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution.
All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order.
In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems.
Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations.
Use of Photoelectric Sensors
The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings.
Above the carrier loop, there are plates with identification holes.
Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification.
By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components.
Bodpofz I D Dsfx Adijlh
The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.
Malý inzerát
Skarżysko-Kamienna
286 km
Zariadenia na práškové lakovanie
ROMERKompleksowe lakiernie proszkowe
Zavolať
Rok výroby: 2020, stav: nový, Transport Systems
Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements.
- For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors).
- In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability.
- For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution.
All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order.
Bjdpfx Adefz I Edoislh
In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems.
Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations.
Use of Photoelectric Sensors
The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings.
Above the carrier loop, there are plates with identification holes.
Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification.
By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components.
The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.
Malý inzerát
Skarżysko-Kamienna
286 km
Zariadenia na práškové lakovanie
ROMER /Automatyczna liniaAutomat
Zavolať
Rok výroby: 2020, stav: nový, Transport Systems
Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements.
- For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors).
- In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability.
- For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution.
Bedpoflmdwefx Adijlh
All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order.
In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems.
Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations.
Use of Photoelectric Sensors
The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings.
Above the carrier loop, there are plates with identification holes.
Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification.
By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components.
The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.
Malý inzerát
Skarżysko-Kamienna
286 km
Piec na práškové lakovanie
ROMERCuring Oven SW Series
Zavolať
Rok výroby: 2025, stav: nový, Ceny vytvrdzovacích pecí zobrazených na fotografiách sa líšia v závislosti od veľkosti, konfigurácie a voliteľnej výbavy. 💡📏⚙️
V spoločnosti ROMER vyrábame štandardné modely aj plne zákazkové riešenia, prispôsobené podľa vašich požiadaviek na proces. 🏭✅
Informujte nás o požadovanej veľkosti dielov, kapacite linky, profile vytvrdzovania a dostupnom priestore – navrhneme optimálne riešenie a voliteľné vybavenie, ktoré skutočne zlepší každodennú prevádzku. 🔥🎯
🧠📡 Ovládanie a monitoring
Živé riadenie procesu: teplota, čas, prietok vzduchu a prevádzkové režimy – s alarmami a uloženými receptúrami pre opakujúce sa cykly. 🔁✅
🔥🧩 Ohrievací modul
Rýchly nábeh a stabilná teplota vďaka účinným výhrevným telesám a rýchlemu prenosu energie. ⚡🌡️
🌀💨 Obehové vzduchotechnika
Rovnomerný prietok vzduchu minimalizuje teplotné rozdiely a zvyšuje kvalitu povrchovej úpravy. 🎯✅
🧱❄️ Izolácia a konštrukcia
Inteligentná konštrukcia komory minimalizuje tepelné straty – rýchlejší nábeh na požadovanú teplotu, nižšia spotreba. ♻️📉
🛡️⚠️ Bezpečnosť a certifikácia
Senzory, blokácie a ochranná logika zvyšujú bezpečnosť a spoľahlivosť prevádzky. 🔒👷
⚡💰 Vysoká efektivita
Optimalizovaný prenos tepla a znížené straty znamenajú reálne úspory v prevádzke. 📉🔥
⏰🤖 Automatický nábeh
Programovateľný časovač – automatické predhriatie pred nástupom zmeny pre plynulejší rozbeh výroby. ⏱️✅
🚪🔒 Samozamykacie dvere + inteligentný komín
Zabraňuje nechcenému otvoreniu, komín pracuje iba v nevyhnutných režimoch pre vyššiu bezpečnosť. 🧯✅
🌿🔋 ECO režim
Energeticky úsporný pohotovostný režim – úspora paliva až 20 % (v závislosti od procesu). 🌱📉
👀💡 Kontrola a osvetlenie
Možnosť kontroly priebehu bez otvorenia dverí – menší teplotný pokles, jednoduchší dohľad. ✨👁️
🛤️🔥 Vodidlá a automatická kapota
Kapota aktívna iba pri nakládke znižuje tepelné straty, automatické podávanie koľajníc zlepšuje ergonómiu a rýchlosť obsluhy. 🙌⚙️
🎛️🌡️ MULTI-ZÓNA OHREV
Nezávislé riadenie zón pre rovnomerné vytvrdzovanie dielov rôznej hmotnosti a geometrie. 🧩✅
🧠♨️ Systém MTS
Výhrevné telesá bez tepelných mostov – vyššia účinnosť a rýchlejšie dosiahnutie nastavených parametrov. ⚡⏱️
2-v-1 🧱↔️🧱 Delená komora
Pohyblivá prepážka pre dve nezávislé zóny – sušenie a vytvrdzovanie v jednom zariadení, maximálna flexibilita. 🚀🔁
Blodpfx Adsfzccnjioh
🎚️🌀 VFD ventilácia
Plynule regulovateľné otáčky ventilátora podľa podmienok v komore – lepšie riadenie a nižšia spotreba elektrickej energie. ⚙️💡
Malý inzerát
Skarżysko-Kamienna
286 km
Zariadenia na práškové lakovanie
ROMERMalowanie elektrostatyczne
Zavolať
Rok výroby: 2020, stav: nový, 7-inch touch panel
The large color touch panel makes parameter input even easier and more convenient.
5 programs with 50 steps each
It is possible to program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes.
Information about gas and oil consumption
Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate the consumption and cost of each firing process.
USB storage
Every firing process is logged, and the data can be transferred to a USB stick for analysis on a PC. Each file is automatically created for a single firing process, recording extreme temperatures and exact timing. Files are saved in *.csv (Excel spreadsheet) format. For all customers until the end of 2016, this feature is free of charge. At other companies, this can cost several thousand euros.
Storage of the last 20 firing processes
Is something wrong? Did too few items come out of the kiln? Now you can check the exact parameters of the firing process, such as duration or potential issues.
New! Timer
It is possible to set the start time, allowing the kiln to turn on automatically before the workday begins.
Made by professionals for professionals
Automatic smoke extraction
The smoke extraction system can be programmed to open a few minutes before the end of the firing process to vent smoke from the chamber. The smoke extractor can also be controlled via the touch panel.
Process duration timer
Using the heating dynamics, the process duration is calculated and the end time of the firing process is displayed.
Self-closing doors
To open, simply pull the door. To close, just push—it will close automatically.
Exhaust hood above the door (optional)
Bljdpsfzkrnefx Adijh
To minimize hall heating caused by opening the door, an exhaust hood can be installed above the door to remove hot air.
Partition wall (optional)
The partition wall is suitable for customers purchasing a large kiln who wish to use only part of the kiln. The oven is equipped with a movable partition wall and dedicated control system.
2 in 1 (optional)
It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.
Malý inzerát
Skarżysko-Kamienna
286 km
Pec na práškové lakovanie
ROMER/System malowania elektrostatycznegSL-Piec
Zavolať
Rok výroby: 2020, stav: nový, 7-inch touch panel
The large color touch panel makes parameter input even easier and more convenient.
5 programs with 50 steps each
It is possible to program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes.
Information about gas and oil consumption
Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate the consumption and cost of each firing process.
USB storage
Every firing process is logged, and the data can be transferred to a USB stick for analysis on a PC. Each file is automatically created for a single firing process, recording extreme temperatures and exact timing. Files are saved in *.csv (Excel spreadsheet) format. For all customers until the end of 2016, this feature is free of charge. At other companies, this can cost several thousand euros.
Storage of the last 20 firing processes
Is something wrong? Did too few items come out of the kiln? Now you can check the exact parameters of the firing process, such as duration or potential issues.
New! Timer
Blodpjfzkqmsfx Adieh
It is possible to set the start time, allowing the kiln to turn on automatically before the workday begins.
Made by professionals for professionals
Automatic smoke extraction
The smoke extraction system can be programmed to open a few minutes before the end of the firing process to vent smoke from the chamber. The smoke extractor can also be controlled via the touch panel.
Process duration timer
Using the heating dynamics, the process duration is calculated and the end time of the firing process is displayed.
Self-closing doors
To open, simply pull the door. To close, just push—it will close automatically.
Exhaust hood above the door (optional)
To minimize hall heating caused by opening the door, an exhaust hood can be installed above the door to remove hot air.
Partition wall (optional)
The partition wall is suitable for customers purchasing a large kiln who wish to use only part of the kiln. The oven is equipped with a movable partition wall and dedicated control system.
2 in 1 (optional)
It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.
Malý inzerát
Skarżysko-Kamienna
286 km
Zariadenia na práškové lakovanie
ROMERKompleksowe lakiernie proszkowe
Zavolať
Rok výroby: 2020, stav: nový, Transport Systems
Bljdpfxsfz Nb To Adish
Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements.
- For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors).
- In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability.
- For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution.
All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order.
In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems.
Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations.
Use of Photoelectric Sensors
The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings.
Above the carrier loop, there are plates with identification holes.
Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification.
By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components.
The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.
Malý inzerát
Skarżysko-Kamienna
286 km
Zariadenia na práškové lakovanie
ROMER/ Electrostatic paintingSLS
Zavolať
Rok výroby: 2020, stav: nový, 7-inch touch panel
The large color touch panel makes parameter input even easier and more convenient.
5 programs with 50 steps each
It is possible to program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes.
Information about gas and oil consumption
Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate the consumption and cost of each firing process.
USB storage
Every firing process is logged, and the data can be transferred to a USB stick for analysis on a PC. Each file is automatically created for a single firing process, recording extreme temperatures and exact timing. Files are saved in *.csv (Excel spreadsheet) format. For all customers until the end of 2016, this feature is free of charge. At other companies, this can cost several thousand euros.
Storage of the last 20 firing processes
Is something wrong? Did too few items come out of the kiln? Now you can check the exact parameters of the firing process, such as duration or potential issues.
New! Timer
It is possible to set the start time, allowing the kiln to turn on automatically before the workday begins.
Made by professionals for professionals
Automatic smoke extraction
The smoke extraction system can be programmed to open a few minutes before the end of the firing process to vent smoke from the chamber. The smoke extractor can also be controlled via the touch panel.
Process duration timer
Using the heating dynamics, the process duration is calculated and the end time of the firing process is displayed.
Self-closing doors
To open, simply pull the door. To close, just push—it will close automatically.
Exhaust hood above the door (optional)
To minimize hall heating caused by opening the door, an exhaust hood can be installed above the door to remove hot air.
Partition wall (optional)
The partition wall is suitable for customers purchasing a large kiln who wish to use only part of the kiln. The oven is equipped with a movable partition wall and dedicated control system.
2 in 1 (optional)
It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.
Bledofz U Tispfx Adieh
Malý inzerát
Skarżysko-Kamienna
286 km
Zariadenia na práškové lakovanie, RÚRA
ROMERKompleksowe lakiernie proszkowe
Zavolať
Rok výroby: 2020, stav: nový, Transport Systems
Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements.
- For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors).
- In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability.
- For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution.
All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order.
In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems.
Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations.
Bedpfx Aofz U S Eodislh
Use of Photoelectric Sensors
The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings.
Above the carrier loop, there are plates with identification holes.
Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification.
By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components.
The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.
Pečať dôvery
Predajcovia certifikovaní spoločnosťou Machineseeker

Malý inzerát
Burgoberbach
668 km
Lakovacia linka, zariadenie na úpravu povrchov
RippertKombi Kabinen Anlage
Zavolať
Stav: použitý, Rok výroby: 2009, Funkcionalita: plne funkčný, celková výška: 5 500 mm, celková dĺžka: 16 500 mm, celková šírka: 6 400 mm, Výbava: kabína, For sale is a high-quality, modular industrial surface treatment system from the premium manufacturer RIPPERT Anlagentechnik (commission no. 20809025), built in 2009. The system is located in Nuremberg, features a linear configuration, and is fully documented. It is ideal for large components or series processing in industrial applications.
Dimensions:
L x W x H: approx. 16.5 x 6.4 x 5.5 m
Combination spray booths (1 & 2): each approx. 6 x 4 m
Washing booth: approx. 4.5 x 4 m
SYSTEM SCOPE:
- 3x combination paint/drying booths: Including large folding doors, complete lighting, and supply/exhaust air ducts.
- 1x industrial washing booth: For professional cleaning and preparation of workpieces.
- 1x technical room & day storage: Contains media control (RLT 4.0) and an integrated logistics area.
TECHNICAL DATA & CONTROL CABINET:
- Central control cabinet: Rittal TS 8005 floor-standing enclosure (dimensions: 3600 x 2200 x 500 mm, RAL 7035).
Blodoy U I Ulepfx Adish
- Electrical connection values: Main circuit 400 V, rated current 450 A with integrated PLC control.
- Media connections: Prepared for gas (burners 1–4), compressed air, demineralized-/city water, wastewater, and pump-heated water.
IMPORTANT CONDITION NOTE & SCOPE OF DELIVERY:
The original operating manual (Volume 2a: Mechanics/Drawings) as well as complete electrical documentation are included in the scope of delivery.
Please note: Offer includes items as shown in the photos, except for the pallets in the foreground.
DISMANTLING AND DELIVERY CONDITIONS:
- Self-dismantling (preferred): Professional disassembly and transport are to be carried out by the buyer at their own cost and risk.
- Dismantling for a surcharge: Organized dismantling or provision of the equipment can be arranged by prior agreement and at additional cost.
KEY FACTS & LEGAL:
- Location: Nuremberg
- Inspection: Possible by prior arrangement.
Loading and transport across Europe can be organized upon request and for an additional charge.
Prices are net plus VAT.
Inspection by appointment possible. Contact us – our team will be happy to assist you.
Trade-in or exchange possible!
Machinery purchase/sale
PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE.
Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours?
For more information or to get in touch, please visit our website.
Malý inzerát
Babenhausen
792 km
Postrekovacia súprava (zariadenie na aplikáciu suspenzií alebo kvapalín, zvyčajne v poľnohospodárstv
RiehleComjet
Zavolať
Stav: dobrý (použitý), Funkcionalita: plne funkčný, vstupné napätie: 400 V, vstupná frekvencia: 50 Hz, typ vstupného prúdu: trojfázový, Plne automatický proces lúhovania
Model Riehle: Comjet
Vykladač vozíka 580x980
Výkon až cca 240 plechov/hod.
Vyťahovateľná lúhová nádrž 180 litrov
Trojitý sýty lúhový záves
Vhodné pre veľkosť plechu 580 x 780 a 580 x 980 mm
Vysoký výkon čerpadla s dvojitým filtrom
So soľničkou
Vyhotovenie z nehrdzavejúcej ocele
Pripojenie 400V, 32A CEE zástrčka
Rozmery cca: 1270 x 4800 x 2500 mm (ŠxDxV)
Bodpfx Adsywalujielh
Použitý stroj
Malý inzerát
Babenhausen
792 km
Nakladacie zariadenie
LochbihlerFiBa NEU
Zavolať
Stav: nový, Rok výroby: 2026, Funkcionalita: plne funkčný, číslo stroja/vozidla: 2026, vstupné napätie: 230 V, dĺžka záruky: 12 mesiace, Certifikované DGUV do: 07/2027, typ vstupného prúdu: Klimatizácia, celková dĺžka: 950 mm, celková šírka: 600 mm, celková výška: 660 mm, vstupná frekvencia: 50 Hz, potrebná výška: 660 mm, požiadavok na dĺžku priestoru: 950 mm, požadovaná šírka: 600 mm, NOVÉ NOVÉ Lúhovacia stroj NOVÉ NOVÉ
Lúhovací stroj pre prevádzky
TOP model: FiBa
dvojitá záclona s lúhom
ideálne na praclíky a lúhové pečivo!
Najlepšie pečivo pre každého!
Vhodné pre plechy s rozmerom 600 x 400 mm
Lúhovacie zariadenie pre prevádzku
Polautomatické so závesom na posúvanie
Stolové zariadenie z nerezovej ocele
Rozmery v mm: 600 x 950 x 660 (ŠxHxV)
Iba u nás: testované podľa DGUV V3
NOVÝ stroj! + servis náhradných dielov
Možnosti:
Leasing a prenájom
Bedpodlp Rysfx Adielh
Presúvací stôl z nerezovej ocele s aretačnými kolieskami
S 5 zasúvacími priehradkami pre plechy 600 x 400 mm
Zmluva o údržbe
Servisný balík
Box s náhradnými dielmi
Zaškolenie a uvedenie do prevádzky
Navštívte náš predaj Milbrandt s ukážkovou pekárňou
a množstvom pekárskych strojov!
Malý inzerát
Babenhausen
792 km
Zariadenie na miešanie a dávkovanie vody
LangheinzAquamix 32
Zavolať
Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, vstupné napätie: 230 V, vstupná frekvencia: 50 Hz, Certifikované DGUV do: 07/2027, typ vstupného prúdu: Klimatizácia, Zariadenie na miešanie a dávkovanie vody Aquamix 32
Plne automatické zariadenie na miešanie a dávkovanie vody
s automaticky riadeným predprúdom a numerickým zadaním
Technické údaje:
Prívody teploty: 3 (s ľadovou vodou)
Rozsah dávkovania: 0,1 l - 999,9 l
Blsdpfx Asygdaysdijh
Regulačný rozsah teploty: +0,5°C až +70°C
Presnosť teploty: +/-2°C
Presnosť dávkovania od 1 l: +/-0,1 l
Prietok vody pri 3 bar: do 30 l/min
Pripojenie vody: 3/4" vonkajší závit
Elektrické pripojenie: 220 - 240 V
Rozmery zariadenia Š x V x H: 300 x 300 x 170 mm
Použité zariadenie
Ďalšie zariadenia máme na sklade!
Uľahčujeme vám vyhľadávanie: "práškové zariadenie"
Okamžite a bezplatne dostanete nové ponuky e-mailom.
Vyhľadávaciu úlohu môžete kedykoľvek jednoducho ukončiť.

Informujte sa teraz
+44 20 806 810 84
+44 20 806 810 84
Vložiť inzerát teraz
*za inzerát/mesiac





































































































































































