Seitz - Werke Gmbh Filter Vrstiev kúpiť použité (71 520)

Stav: dobrý (použitý), Rok výroby: 2010, prevádzkové hodiny: 3 641 h, Funkcionalita: plne funkčný, lisovacia sila: 36 t, šírka plniaceho otvoru: 1 100 mm, dĺžka plniaceho otvoru: 1 080 mm, šírka balíka: 1 100 mm, výška balíka: 750 mm, výkon: 15 kW (20,39 k), objemový prietok: 90 m³/h, Technical Data Compactor: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of manufacture: 2010 Operating hours: 3,641 h Main press force: 36 t Bjdou Thh Eepfx Aaljlg Specific press force: 467 N/cm² Feed chute dimensions: 1,080 x 1,100 mm (L x W) Cycle time: 34 seconds Fill volume per press cycle: 0.85 m³ Theoretical throughput: 90 m³/hour Throughput under operating conditions with a bulk density of 35 kg/m³: approx. 51 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 15 kW Tying: 4-fold vertical, semi-automatic, with polyester twine Throughput at a bulk density of: - 35 kg/m³: 1.8 t/hour - 60 kg/m³: 2.5 t/hour - 100 kg/m³: 3.1 t/hour Transport dimensions (press only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine weight (press): approx. 4 t Remarks: The machine was function-tested in our workshop, then stored and is therefore available at short notice. The machine documentation (operating manual, CE certificate, electrical and hydraulic schematics) is available. Inspection by appointment is possible. We do not accept liability for the technical data or possible errors.

Stav: generálne opravený (použitý), Rok výroby: 2019, prevádzkové hodiny: 3 000 h, Funkcionalita: plne funkčný, lisovacia sila: 70 t, celková hmotnosť: 9 500 kg, šírka plniaceho otvoru: 420 mm, dĺžka plniaceho otvoru: 1 250 mm, Technical Data – Baling Press / Can Press / Sheet Metal Press: Manufacturer: unoTech GmbH Model: UPAXX 70 Year of Manufacture: 2019 Operating Hours: approx. 3,000 hours Pressing Force: 700 kN at 315 bar Filling Opening (Feed Hopper): 420 x 1,250 mm (D x W) Channel Cross Section (Bale Size): 350 x 500 mm (H x W), length depends on material Drive Power: 30 kW Connected Load: 40 kW Total Current Consumption: 70 A Blsdpfxeu Th S Se Aalog Throughput Capacity for Empty Beverage Cans: - with one compaction stroke: approx. 1.7 t/h - with two compaction strokes: approx. 2.5 t/h Achieved Compaction: approx. 1,200 kg/m³ Hydraulic Oil Tank Capacity: 850 L Dimensions (assembled): 8,000 x 1,600 x 2,500 mm (L x W x H) Transport Weight (press): approx. 9.5 t Accessories: - Oil cooler 1.5 kW - Oil tank heater 1.5 kW - Press box made from wear-resistant steel S355 Material Suitability: According to the manufacturer, this machine is suitable for pressing tin cans, sheet metal scrap, steel sheet, as well as aluminium, brass, and copper waste. Condition of the baling press: The baling press has been completely overhauled in our workshop. The press is in very good condition – see the function video after refurbishment – and is sold with a 12-month OBM spare parts warranty. Remarks: Full documentation available (operating manual, CE declaration, electrical/hydraulic wiring diagram). Inspection possible by appointment. We accept no liability for typographical or technical errors in the information provided.

Stav: dielensky repasované (použité), Rok výroby: 2009, prevádzkové hodiny: 22 029 h, Funkcionalita: plne funkčný, lisovacia sila: 80 t, šírka plniaceho otvoru: 1 000 mm, dĺžka plniaceho otvoru: 1 400 mm, šírka balíka: 1 100 mm, výška balíka: 750 mm, hmotnosť balíka: 600 kg, celková hmotnosť: 16 000 kg, výkon: 45 kW (61,18 k), rok poslednej generálnej opravy: 2025, Technical data baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours, as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed opening dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length adjustable Drive power: 45 kW Total connected load: 75 kW Binding: 4-fold vertical, fully automatic Throughput capacities at a bulk density of: - 30 kg/m³: approx. 6.0 t/hour - 50 kg/m³: approx. 10.5 t/hour - 100 kg/m³: approx. 17.5 t/hour Bale weights (bale length approx. 1.2 m): up to 600 kg, depending on material PLC control: Siemens S7-300 Display panel: pulsotronic Installed press dimensions: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight (baler): 16 t Special equipment: - Wear-resistant floor made of HARDOX steel - Special press ram for compacting "difficult" materials and loose bulk materials of small particle size - Control cabinet air conditioning - Machine base elevation 200 mm Remarks: The machine was serviced and partially overhauled in our workshop. The following tasks were performed and parts replaced: • Disassembly of the press ram, breakdown into individual parts, overhaul of the mechanism, replacement of the following plastic wear plates and rails: Bjdpfxsx A U Nce Aalelg o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Central plastic main wear plate (support plate) under the press ram • Steel guide rails left/right at the top of the frame replaced • Complete base plate replaced (in four sections), made of wear-resistant HARDOX steel • Wire feed rails in the press base newly welded and smoothed • Counter knife assembly (two-part) in the frame replaced • Knife gap adjusted to approx. 2.5 mm • Disassembly of the tying and twisting unit, breakdown into individual parts, overhaul of the mechanism, replacement of all groove ball bearings and axial ball bearings of the twisting shafts, wire cutters cleaned and re-aligned, chains lubricated and tensioned • Carrier roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, chemically analyzed, in good condition and therefore has not been replaced and can continue to be used • General maintenance performed Afterwards, the baler was subjected to a machine test in manual and automatic mode (see video of machine function test).

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Rok výroby: 2019, nosnosť: 500 kg, Zariadenie je ako nové. Takmer nebolo používané. Hydrobull malý žeriav s protizávažím, nosnosť 500 kg, s náplňou, ITI 500 N. Bledpfx Asy El E Njalsg Originálny Hydrobull žeriav s protizávažím má podvozok posunutý dozadu a v jeho špeciálne zakrivenom dizajne je ukrytá náplň protizávažia, ktorú zabezpečuje zákazník. Vďaka protizávažiu je tento malý žeriav flexibilný a okamžite použiteľný. Tento skutočne cenovo výhodný originálny Hydrobull žeriav je určený na príležitostné použitie. Na častejšie použitie odporúčame verziu Elektrobull alebo priemyselné vyhotovenia. Kompaktná hydraulika je navrhnutá na cca 500 zdvihov.

Stav: nový, Funkcionalita: plne funkčný, číslo stroja/vozidla: 0700, pohotovostná hmotnosť: 3 700 kg, maximálna hmotnosť nákladu: 50 000 kg, celková hmotnosť: 53 700 kg, konfigurácia náprav: 4x2, prvá registrácia: 03/2026, ďalšia kontrola (TÜV): 03/2027, dĺžka ložného priestoru: 5 000 mm, šírka ložného priestoru: 2 200 mm, výška ložného priestoru: 880 mm, celková dĺžka: 6 600 mm, celková šírka: 2 200 mm, celková výška: 880 mm, veľkosť pneumatiky: 559x356, stav pneumatík: 100 percento, maximálna rýchlosť: 6 km/h, farba: oranžová, Ťažkotonážny transportný vozík s nosnosťou 50 000 kg na 60 % ložnej plochy pri rýchlosti 6 km/h. Rozmery: 5000 x 2200 x cca 880 mm Prepravná podlaha: zapustená skrutkovaná douglaska, hrúbka 50 mm Obutie: bandáže 559 x 356 mm, 8-násobné obutie Riadenie: riadenie všetkých kolies s nastaviteľnou zbiehavosťou a riadiacou tyčou Oje na prednej aj zadnej strane pre ťažné zariadenie Príves je použiteľný v oboch smeroch jazdy Lakovanie RAL 2000 Na každej pozdĺžnej strane sú štyri zvárané oká Príslušenstvo: hydraulický podkladový klin s dvojstupňovým účinkom Dokumentácia je pripevnená v DOKU boxe na ráme Odrazky na troch stranách Ťažné oje 2000 mm s poistkou proti vypadnutiu a výškovo nastaviteľné Blodpfxjyq Rr Rs Aalog

Stav: nový, Funkcionalita: plne funkčný, celková hmotnosť: 5 800 kg, celková dĺžka: 5 000 mm, celková šírka: 1 250 mm, celková výška: 650 mm, Rok výroby: 2025, dĺžka vidlíc: 5 000 mm, nosnosť: 5 000 kg, Transportná lafeta 1250 x 5000 mm s nosnosťou 5000 kg Obutie: bandážové kolesá Riadenie: otočný veniec s uchytením na vidly Bočné zasúvacie zábradlia voliteľné Blsdov Hnnkepfx Aalsg Oporné nohy vpredu na odstavenie lafety

Stav: nový, Rok výroby: 2025, Ťažkotonážny prepravný príves na vnútropodnikovú dopravu Rozmery: 4000 x 2000 x 510 mm Riadenie všetkých kolies Pneumatiky: No Making Vulkollan obruče 350x110x305 Prepravná podlaha: drevo 40 mm, zapustené, skrutkované Bledpfx Aasl D Ng Njleg Lakovanie v RAL 5010 alebo RAL 2000 Ťažné oje so závesným okom 40 mm, s poistkou proti vypadnutiu a nastavením výšky. Dorazové bloky po 4 ks na každej pozdĺžnej strane pre zabezpečenie nákladu Voliteľne s druhou hlavou oja vzadu, aby bolo možné oje prehodiť spredu dozadu

Stav: nový, Rok výroby: 2026, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries to both right- and left-hand bending. Plug-in bending tools allow for quick changeover to other tube sizes. A high-speed hydraulic system for reducing non-productive times is a key factor for series production. The clamping pressure for tube clamping is optimally adjustable. The PLC control (USB-stick expandable), with data storage and the latest X2X interface, can store an almost unlimited number of programs for bending angles, length measurements, and twist angles for up to 50 bending sequences on a single tube. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine offers two operating modes: In "Simple Bending" mode, length and rotation of the bends are displayed automatically. In "Controlled Bending" mode, the data is pre-stored and a continuous set-actual value comparison is performed during bending. This eliminates mispositioning within a tolerance window and thus minimizes user-dependent error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically returned early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for on-site installation as well as for special designs with very long tube loading, and is also available as a stationary variant with an organizing system for tools and mandrel rods. The cost-effective alternative to fully controlled CNC machines. POSSIBLE FIELDS OF APPLICATION: • Hydraulic piping • Pipeline construction • Plant engineering, e.g., chemical industry • Metal construction • Prototype construction • Technical data: • Bending capacity Ø 6 to 50 x 4 mm, depending on material • Bending radius min/max: 10 mm/140 mm • Minimal bending radii: 1.5 x Ø (standard 2 x Ø) • Multi-function machine control, bending angle setting (0.1°) • Mandrel support lengths 1500/3000/4500/6000 mm (special versions longer available) • Maximum 180º bending result • Weight 800-900 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-action chuck • Length and rotation positioning via automatic brake function or manual stops via foot switch • Automatic length and rotation positioning via servomotors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for checking tool tension • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB Bljdpeng Exajfx Aaljg OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demo room • Consultation/information session at your site • Consulting and processing as a leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your premises

Stav: nový, Rok výroby: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a freestanding bending head can be easily converted for complex geometries to allow both right- and left-hand bending. The plug-in bending tools enable quick changeover to other tube sizes. A high-speed hydraulic system reduces non-productive times and is a key factor for series production. The clamping pressure for tube holding can be optimally adjusted. The PLC control (expandable via USB stick), featuring data storage and the latest X2X interface, can store a virtually unlimited number of programs for bending angles, length measurements, and torsion angles for up to 50 bends per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine features two operating modes: In ‘Simple Bending’, the system automatically displays the length and twist of the bends relative to each other. In ‘Controlled Bending’ mode, the data is pre-stored and a permanent target/actual comparison is done during the bending process. This guarantees precise positioning within a defined tolerance window, minimizing operator-related errors. General fault messages are displayed in full text on the large screen. Mandrel retraction is programmable and can be triggered automatically upon reaching the bending angle. The compact drive unit with the detachable mandrel carrier offers advantages both for on-site assembly and for special constructions requiring large tube feed, and is also available as a stationary variant with an organization system for tools and mandrel shafts. The cost-effective alternative to a fully automated CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering, e.g. chemical industry • Metalworking • Prototype construction Technical data: • Bending capacity Ø 6 to 50 x 4 mm depending on material • Bending radius min/max: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control, bending angle setting (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special versions longer on request) • Maximum 180º bending result • Weight: 600-700 kg (depending on configuration) • Ergonomic operation with safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-action chuck • Length and torsion positioning via automatic braking function or manual stops with foot switch • Semi-automatic length and torsion positioning via servomotors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for checking tool clamping • 10-inch touchscreen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: • Welcome to test production in our in-house demo room • Consultation and information session at your site • Leasing/financing consultation and handling via JUTEC • Trade-in of your current machine Bljdpsndn Agjfx Aaleg • Service contracts, on-site maintenance

Stav: nový, Rok výroby: 2025, NADSTAVEC NA OHÝBANIE PROFILOV PB20 Ideálnym doplnkom pre ohýbanie rúr na modeloch 3000 a 6000 je nadstavec na ohýbanie profilov PB20. Zariadenie je možné jednoducho a rýchlo nasadiť na hriadeľ ohýbačky bez potreby použitia náradia. Obrábaný kus je upnutý na otočný tanier so zvernými čeľusťami a ťahaný okolo ohýbacieho nástroja. S týmto systémom je možné presne zmerať a opakovateľne ohýbať dĺžky ramien s využitím dorazu. TECHNICKÉ ÚDAJE: • Ohývacia kapacita oceľ 37: 100 x 10 mm, Ø 20 mm • Dostupné mnohé štandardné nástroje • Možnosť špeciálnych nástrojov • Nástroje na ostré hrany s ohýbacím rádiusom R2 alebo 5 mm • Okrúhle nástroje R 10 až 25 mm pre ohyby max. 260°, voliteľné NAŠE SLUŽBY: • Možnosť testovacej výroby v našich priestoroch v demo miestnosti • Konzultačné a informačné stretnutie priamo u vás • Konzultácia a realizácia financovania/leasingu cez spoločnosť JUTEC • Možnosť odkúpenia vašej aktuálnej stroja protihodnotou • Servisné zmluvy, údržba priamo u vás Bljdpfxonh R Eks Aaljg

Stav: nový, Rok výroby: 2025, MOBILE PIPE BENDING MACHINE WITH HIGH PERFORMANCE: The compact, mobile design enables precise and repeatable bending both stationary and directly on-site, for pipe diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox ensure strong drive power. The motor speed is automatically adjusted, allowing for a quicker return stroke and reduced cycle times. Direct position detection on the bending axis provides optimal bending accuracy and very high repeatability. The bending angle can be set to 0.5° quickly and easily via push buttons. The large LCD display clearly indicates angles. Up to three bending angles can be saved, allowing for efficient bending of pipes with different requirements. For transport, the compact unit including accessories can be stored safely and neatly in robust transport cases. The “stationary tube, rotating tool” principle means minimum space is needed during bending. Slide shoes are used for thin-walled pipes, enabling wrinkle-free bending and minimal deformation, e.g. for stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square and round bars can be bent effortlessly. POTENTIAL APPLICATIONS: • Hydraulic pipe assembly • Prototype construction • Plumbing and heating installation Technical data: • Bending capacity: Ø 6 to 35 mm, CU Ø 42 mm depending on material • Min./max. bending radius: 36 mm / 150 mm • Precise digital bending angle adjustment: 0.5° • Max. 180º bending result; continuous operation possible for special applications • 40 mm hexagonal shaft for quick tool changes Bsdpfx Aajnfvx Nololg • Safety foot switch with emergency stop • 230 V, single-phase connection • Weight: 29 kg • Frequency inverter and three-phase motor • Storage for 3 bending angles OPTIONAL ACCESSORIES: • Slide shoe mount • Double roller apparatus • PB20 Profile Bender – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod stand • Machine case • Tool case • Small bending device KBV • Special tools as per request OUR SERVICES: • Test production in our in-house demo room • On-site consultation at your facility • Leasing/financing purchase advice and processing via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Stav: nový, Rok výroby: 2025, číslo stroja/vozidla: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME APPLICATIONS: The compact bending machine enables precise and repeatable bending up to an outside diameter of 100 mm, both stationary and directly at the installation site. Transport is possible using a pallet truck or the optional rollers. A powerful three-phase motor and a precision gearbox ensure a robust drive. The machine stands out for its compact and slim design, as well as a very open bending area. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle is set easily and quickly via a user-friendly, menu-guided interface available in 14 languages with touchscreen control, allowing for even more intuitive operation. For more complex bending tasks, it is possible to store up to 100 bending programs, with an angle sequence of max. 8 arcs per geometry. The multifunctional control allows the bending speed for forward and backward movement to be variably set, and features a parameterizable overbend function to compensate for material springback. With the help of four material characteristic curves, the material is automatically overbent to the required bending angle, achieving a precise bending result. The principle of “stationary tube and rotating tool” ensures minimal space requirements during bending. For thin-walled tubes, sliding shoes are used to produce wrinkle-free bends and to bend arcs with minimum deformation, e.g. from stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square, and round steel can be bent effortlessly. The small-radius bending device KBV, as an attachment, allows for extremely small bending radii. POSSIBLE APPLICATIONS: Bledpondk N Ajfx Aalog • Plant construction • Hydraulic piping • Serpentine bending • Prototype construction • Plumbing and heating installation • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase current 400 V • Bending radius up to 500 mm • Multifunctional machine control, bending angle setting (0.1°) • Maximum bending angle 240° • Safety foot switch with emergency stop • Weight 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 series with bending radii from 45 mm, incl. 40 mm hexagonal shaft • Profile bender PB20 – for bending flat and square steel up to max. 100 x 10 mm, round steel up to max. 20 mm • Small-radius bending device KBV • Special tools based on customer requirements • Software modifications for special applications OUR SERVICE: • Welcome to test production at our in-house demo room • Consulting and information session at your site • Consulting and processing for lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Stav: nový, Rok výroby: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a vise. The drive is operated via a screw-in handle. A lockable setting ring ensures repeatable bends. The plug-in tools can be changed with exceptional ease. The "stationary tube and rotating tool" principle allows for bending in the smallest of spaces. For thin-walled tubes, sliding shoes are used for crease-free bending, producing bends with minimal deformation in materials such as stainless steel and copper tubes. The optional version with hexagonal fitting allows use not only in a vise, but also with the drive systems of the 3000 and 6000 bending machines. To do so, the KBV is simply mounted onto the bending shaft of the machine. POSSIBLE APPLICATIONS: • Hydraulic piping installation • Prototyping • Sanitary and heating installations Bledeng Amkopfx Aalog TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limiter • Maximum bending result 180º OPTIONAL ACCESSORIES: • KBV with hexagonal fitting for use on model 3000 or 6000 • Machine case • Length stop OUR ON-SITE SERVICE FOR YOU: • Test production in our in-house demonstration room • Consultation and information session at your premises • Leasing/financing purchase advice and processing via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Stav: nový, Rok výroby: 2025, PRECÍZNA TROJVAĽCOVÁ OHÝBAČKA Pri vývoji kompaktnej a mobilnej horizontálnej ohýbačky bol dôraz kladený na výrobu rozmerovo presných špirálových tvarov, ako sú napríklad madlá na točité schodiská. Ide o najnáročnejšiu oblasť ohýbania, keďže dve vzájomne sa ovplyvňujúce veličiny (rádius a stúpanie) je potrebné spojiť do rozmerovo presnej geometrie v jednom ohybe. Kombinácia výpočtu rúr na PC, realizácie na ohýbačke a kontroly pomocou meracích zariadení s následnou korekciou hodnôt ohybu zabezpečuje presné výsledky. Jednoduchým zadaním údajov do PC-programu na výpočet rúrok je možné vygenerovať tlačový výstup so všetkými potrebnými ohýbacími a korekčnými údajmi pre stroj. Nový výkonný koncept pohonu umožňuje plynulé nastavenie rýchlosti ohýbania pri potrebe iba 230 V (striedavá prípojka). Na výber sú tvrdené oceľové nástroje a nástroje z tvrdého plastu šetrné k povrchu. Na zabezpečenie optimálneho posuvu aj pri malých rádiusoch sú poháňané všetky tri ohýbacie hriadele. Pohonný systém sa osvedčil aj pri každodennom náročnom nasadení na stavbe, pri ohýbaní rúrok a profilov. Zákazníci systémov 4800, 5000 a 6000 majú možnosť zakúpiť jednotku valčekového ohýbania aj bez pohonu. Valčeková jednotka RB43 sa dá prostredníctvom ohýbacej vlny prispôsobiť systémom 4800, 5000 a 6000, pričom tieto stroje slúžia ako pohonná jednotka. Bsdpfjng A R Sjx Aalelg MOŽNÉ OBLASTI POUŽITIA: • Madlá/podpery pre točité schodiská • Veľké oblúky z rúr a profilov • Všeobecná kovovýroba TECHNICKÉ ÚDAJE: • Ohývací výkon Ø 10 až 60 mm • Minimálny ohýbací rádius: 300 mm pri Ø 42,4 mm • Ohýbanie vpravo aj vľavo • Digitálne nastavenie rádiusu a stúpania • Bezpečnostný nožný spínač s funkciou núdzového zastavenia • Bezúdržbový robustný trojfázový motor • Pripojenie vhodné na stavbu 230 V • Hmotnosť 280 kg VOLITEĽNÉ PRÍSLUŠENSTVO: • Podperný valček – na stabilizáciu • Zdvíhací valček – na riadené stúpanie • MGR – meracie zariadenie na presné určenie rádiusu • MGV – meracie zariadenie na určenie presného stúpania podľa skrútenia • MPW – PC softvér na výpočet správnych hodnôt ohybu • RB4303 – univerzálny ohýbací nástroj pre profily do 60 mm výšky • Nástroje pre špeciálne profily NAŠE SLUŽBY PRE VÁS NA MIESTE: • Možnosť testovacej výroby v našom demonštračnom priestore • Konzultácia a odborné poradenstvo priamo u vás • Možnosť leasingu/financovania vrátane vybavenia • Servisné zmluvy, údržba priamo u vás

Stav: nový, Rok výroby: 2025, číslo stroja/vozidla: 1018, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine with a manual eccentric quick-clamp for tube fixation enables efficient bending operations. The compact drive unit with a detachable mandrel carrier offers advantages for use directly at the installation site. By incorporating position detection directly on the bending axis, we achieve optimal bending accuracy. The bending angle is set quickly and easily via a convenient touchscreen control with a menu-driven user interface. The comfort control provides two speed options as well as a programmable overbend function to compensate for material springback. The bending process is significantly shortened by the automatic "free movement" at the end of the bend. For more complex bending tasks, bend programs can be stored with a sequence of up to 50 angles per geometry. An almost unlimited number of programs can be saved to the controller or a USB stick, along with up to 200 different materials. The plug-in bending tools allow for rapid changeover to other tube sizes. For tricky geometries, the machine can be reconfigured for right- or left-hand bending as standard. The open bending unit allows, for example, the bending of railing frames with only one weld seam. Optionally available calculation software determines the total cut length for the entire geometry as well as feed path, twist, and bending angle for each bend. The mandrel retraction is programmable and can retract automatically upon reaching a specified bending angle. POSSIBLE APPLICATIONS: • Plant construction, e.g. chemical plants • Hydraulic piping • Prototyping • Pipeline construction TECHNICAL DATA: • Bending capacity Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm/140 mm • Bending radii 2 x D • Multifunction machine control, bending angle setting (0.1°) • Mandrel carrier lengths 1500/3000/4500/6000 mm (custom lengths available) • Maximum bending result 180º • Weight 300-500 kg (depending on model) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital measurement of length and rotation (0.1 resolution) • Remote control of all functions on the carriage (rotation and length stop) • Bending radius up to 250 mm • PC-based tube calculation software Blsdpfxjnfvy Uj Aaleg OUR SERVICE: • Test production welcome in our in-house demo showroom • Consulting and information meeting at your location • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stav: nový, Rok výroby: 2025, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII This bending system offers solutions for complex geometries with standard radii of 2xD for tube diameters from 20 to 90 mm. Depending on material quality and wall thickness ratio, radii as small as 1.5xD can also be achieved in series production. With a tool height of 120 mm, there is ample capacity for special profiles. The highly precise and powerful electric drive of the bending axis, along with the stable and rigid construction of the mandrel carrier and bending arm, ensure optimal bending results. Plug-in bending tools allow quick adaptation to other tube dimensions. The clamping pressure for pipe clamping can be optimally set. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store virtually unlimited programs for bending angles, lengths, and rotation angles for up to 50 bending operations per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The control offers 2 operation modes: In "Simple Bending," tube length and rotation of curves relative to each other are automatically displayed. In "Controlled Bending," data are preset and a constant target/actual value comparison is performed during bending. Also available with pneumatic rotary stop or with gearbox-assisted positioning for length and rotation. POSSIBLE APPLICATION AREAS: • Plant construction, e.g., chemical industry • Hydraulic piping • Metal fabrication • Prototype construction • Pipeline construction TECHNICAL DATA: Bedpenh R Suefx Aalolg Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) • Bending radius min/max: 40 mm/250 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunction machine control for bending angle setting (0.1°) • Mandrel carrier lengths 3000/4500/6000 mm • Maximum 180º bend result • Weight 1,600–3,200 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-change chuck • Larger bending radius up to 300 mm • Positioning of length and rotation via automatic brake function or manual stops via foot switch • Semi-automatic positioning of length and rotation via servomotors • Automatic tool retraction • Tube calculation software • 10-inch touchscreen with integrated pipe computation • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and informational meeting at your location • Consulting and processing as leasing/financed purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stav: nový, Rok výroby: 2025, číslo stroja/vozidla: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND INSTALLATION The compact and mobile bending machine enables precise and repeatable bending up to an outside diameter of 60 mm both stationary and directly on site. A powerful three-phase motor and a precision gearbox ensure a strong drive. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle setting is quick and easy via a user-friendly, menu-guided touchscreen interface, guaranteeing even more intuitive operation. For more complex bending tasks, up to 100 bending programs can be stored, each supporting a series of up to eight bends per geometry. The multifunctional control system allows variable adjustment of the bending speed for forward and return motion, and offers a parameterizable overbend function to compensate for material spring-back. With the help of four material curves, the material is automatically overbent to the required bending angle, achieving precise bending results. The principle of “stationary tube and rotating tool” ensures the machine requires minimal floor space during operation. For thin-walled tubes, sliding shoes are used to achieve wrinkle-free bends and to bend arcs with minimal deformation, for example in stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square, and round bars can be bent easily. The KBV small bending device attachment enables extremely small bending radii. Bjdpfeng Ax Sjx Aalslg POSSIBLE APPLICATIONS: • Plant construction • Hydraulic piping • Serpentine bending • Prototyping • Sanitary and heating engineering TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400V • Min/max bending radius: 36 mm / 280 mm • Optional large bending radii up to 500 mm • Multifunction machine control, bending angle setting (0.1°) • Maximum bending angle 240° • 40 mm hexagonal shaft for fast tool changes • Safety foot switch with emergency stop • Weight 110 kg OPTIONAL ACCESSORIES: • Profile bender PB20 – for bending flat and square bars up to max. 100 x 10 mm, and round bars up to max. 20 mm • Roller bender RB43 – attaches to the hex shaft on the bending axis. By switching to continuous bending, the bending system acts as a drive unit. • Small bending device KBV • Special tools on request OUR ON-SITE SERVICE FOR YOU: • Test production welcome at our on-site demo room • Consultation and information session at your location • Advice and handling for leasing/finance purchase • Trade-in of your current machine • Service contracts, on-site maintenance

Stav: použitý, Rok výroby: 2008, číslo stroja/vozidla: 1160821, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Machine No. 166 0821 Year of Manufacture: 2008 Used, operational Travel Paths: X-Axis 600 mm Y-Axis (shuttle position) 600 (975) mm Z-Axis 500 mm Control: Siemens 840D control, side-mounted Feed/Rapid Traverse Speed: X, Y, Z 1 – 45,000 mm/min Max. Feed Force X, Y, Z 15,000 N Average Acceleration: X, Y, Z 2.5 m/s² Measuring System: Absolute linear measuring system X, Y, Z Spindles: Spindle Speed (stepless) 20-10,000 rpm Torque 2 x 363 Nm (S6/40% duty cycle) Power 2 x 38 kW (S6/40% duty cycle) HSK-A 100, horizontal twin arrangement Spindle distance 600 mm Spindle bearing diameter 100 mm Motor spindles liquid-cooled, AC technology Bsdpfjy Ah Rcox Aalslg Working Area: Slew-type carrier with straight-tooth gearing, max. transport load 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec Partition wall between machining and loading area Tool Magazine: 2 x 40 tools HSK-A 100 chain magazine, position-coded Automatic pickup Tool change time (chip-to-chip) 4.9 sec. Max. tool diameter 100 mm 250 mm with adjacent slot free Max. tool length 350 mm Max. tool weight 20 kg Equipment: Central lubrication Oil minimum-quantity lubrication (spindle lubrication) Chip conveyor Connection for central coolant system Hydraulic unit Maintenance unit Water recooler Full enclosure, crane loading possible Dimensions, with paper band filter: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Dimensions, without paper band filter: approx. 5.15 x 6.60 x 4.20 m Miscellaneous: - Good condition for its age - Annual maintenance performed regularly by previous owner --- Sale without workholding devices --- --- without foundation parts --- Immediately available, appointment by arrangement EXW 72793 Pfullingen, Disassembled into main components Transport to installation site by customer/buyer! Dimensions/Transport dimensions of main machine components: 1 pc Machine unit (X, Y, Z) mm 3800 x 3350 x 3400 approx. 13,000 kg 1 pc Table unit mm 4400 x 2400 x 3400 approx. 10,000 kg Plus peripheral equipment such as chip conveyor, small parts, sheet metal etc. Short-term delivery possible!!!!!, appointment by arrangement

Stav: dobrý (použitý), Rok výroby: 1987, Funkcionalita: obmedzená funkčnosť, číslo stroja/vozidla: 63526, celková hmotnosť: 1 200 kg, prevádzková teplota: 220 °C, rok poslednej generálnej opravy: 2022, Na predaj Pfaudler Balfour Nutsche filtrácia, objem 300 l. Sklenou smaltovaný reaktor s plášťom, v prevádzkyschopnom stave. Bodpfxoy Igzkj Aalslg Predajná cena: 24 000 eur, EXW. Možnosť obhliadky priamo v Zofingene, Švajčiarsko.

Rok výroby: 2020, stav: použitý, Funkcionalita: plne funkčný, stavebná výška: 2 200 mm, počet vretien: 3, požiadavok na dĺžku priestoru: 5 000 mm, požadovaná šírka: 5 500 mm, číslo stroja/vozidla: 50844458, stupeň automatizácie: automatický, výrobná kapacita: 3 000 jednotka/h, Ponúkame túto použitú výrobnú linku PIA Automation na výrobu jednorazových chirurgických masiek, rok výroby 2020. Zariadenie bolo v prevádzke iba 2,5 roka v jednozmennej prevádzke a jeho stav je možné označiť ako „veľmi dobrý“. Výrobná linka je navyše vybavená pripojenou výrobou stlačeného vzduchu, ako aj baliacou a zmršťovacou jednotkou. Kupujúci získa navyše suroviny na výrobu približne 300 000 ks jednorazových chirurgických masiek. Rok výroby: 2020 Prevádzkový tlak pneumatiky: 6,0 bar Prevádzkové napätie: 3P/N/PE 400V AC 50 Hz Istenie prívodu: 25 A Krátkodobé zaťaženie: < 10 kA Koncept: Bodpfoy Ddnmex Aalolg Linka pozostáva z celkovo troch častí zariadenia, ktoré sú prepojené pásovými systémami. V prvom segmente sa jednotlivé spotrebné materiály podávajú cez valčeky, skladajú sa, integruje sa nosová výstuž, materiál sa zvarí a následne odreže na správnu dĺžku. Hotové masky sa prostredníctvom taktického pásu a dopravníkových pásov transportujú do ďalších častí zariadenia, ktoré sú postavené paralelne. V týchto častiach sú privádzané ušné pásiky a ultrazvukovo zvarené s telom masky. V prípade otázok alebo ak potrebujete ďalšie informácie, neváhajte nás kontaktovať správou alebo telefonicky.

Stav: pripravené na použitie (použité), Rok výroby: 2014, K dispozícii je šikmý lôžkový filter Polo s vákuovou pásovou filtráciou a zväčšenou zásobnou nádržou. Objem: 5000 l, max. prevádzková teplota: 60°C, prietoková kapacita za minútu emulzia/oleje: 650 l/200 l, objem nečistotnej komory: cca 400 l, objem vákuovej komory: cca 140 l, inštalovaný výkon: 5 kW. Rozmery filtračnej jednotky (D/Š/V): cca 2450 mm/1650 mm/1550 mm, hmotnosť filtračnej jednotky: cca 1150 kg, celková hmotnosť: cca 3000 kg. Dokumentácia je k dispozícii. Obhliadka na mieste je možná. Blodoy Eg Dyjpfx Aalog

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Pomalobežný stroj Šírka rezu - 150 mm Výkon motora - 2,2 kW Otáčky rotora 200 ot./min. Počet rotačných nožov - 9 ks Počet statorových nožov - 2 ks Bedpfx Aeyf I N Ajalslg K dispozícii 6 kusov, stav bezchybný Výkon do 25 kg/h Cena 1000 EUR za kus

Stav: veľmi dobrý (použitý), Rok výroby: 1999, Funkcionalita: plne funkčný, merací rozsah os X: 700 mm, merací rozsah osi Y: 900 mm, merací rozsah osi Z: 500 mm, Zeiss CNC Coordinate Measuring Machine Prismo MP5 Year of manufacture: 8/1999 Last calibration: 9/2023 Measuring range: X = 700 mm, Y = 900 mm, Z = 500 mm Device features, equipment: Bjdpfx Asufgbnealslg - C98 control with operator panel - RDS sensor system with RST - 5-position probe changer magazine - RST 5x probing system - Reference probe - Probe accessories - Calibration sphere - PC with monitor - Calypso Basic 5.4 software - Loading system - Additional accessories and options available - Complete retrofit to C99 and current Calypso version possible - Available at short notice

Stav: pripravené na použitie (použité), Rok výroby: 1999, Funkcionalita: plne funkčný, vstupné napätie: 400 V, vstupný prúd: 21 A, typ vstupného prúdu: Jednosmerný prúd, objemový prietok: 6 045 m³/h, celková hmotnosť: 1 100 kg, ODSÁVAČ ALKO ECO JET 60/5 HD Odsávanie pilín, odsávanie prachu, samočistiaci filter, podtlakové odsávanie ALKO ECO JET Filter je počas prevádzky čistený pneumaticky impulzmi stlačeného vzduchu, čo zabezpečuje vysokú účinnosť zariadenia. Bledpfoyrqnzox Aaleg Ideálne vhodný na všetky typy suchého prachu pri rôznych technologických procesoch. Je možné vymeniť filtračné vaky podľa požiadaviek a účelu.

Stav: použitý, Rok výroby: 2008, Funkcionalita: plne funkčný, celková hmotnosť: 13 500 kg, priemer rotora: 470 mm, dĺžka rozvádzača: 2 800 mm, šírka ovládacej skrine: 600 mm, výška rozvádzača: 2 100 mm, dĺžka rotora: 2 000 mm, výkon: 220 kW (299,12 k), otáčky (max.): 80 ot./min, šírka plniaceho otvoru: 1 650 mm, dĺžka plniaceho otvoru: 2 060 mm, perforácia sita: 50 mm, vstupné napätie: 400 V, Najvýkonnejší model: Micromat 2000 V2 Pohonový motor: 2 x 110 kW, 400 V/50 Hz Riadiaca skriňa: komplet s frekvenčným meničom Otáčky rotora: pri 50 Hz cca 80 ot./min. Rotorové nože: 104 ks, nové Tvar rotorového noža: 43x43x19,5 mm Plniaci otvor (d x š): 2030 x 1650 mm Dĺžka rotora: 2030 mm Obvodová kružnica rotora: 560 mm Bledpfoyxxk Sox Aaljg Škrabací hrebeň: áno Protinôž: áno Hydraulická agregát: komplet Hydraulický valec sítovej kazety: sitá 50x50 mm Celková hmotnosť cca 13,5 t Rozmery (d x š x v): cca 6500 x 2970 x 2660 mm Obhliadka a skúšobná prevádzka možná po dohode. Vrátane násypky Dodacia lehota: ihneď