Kk-Industries Cy4R-Hhs 390-30/25 kúpiť použité (57 454)

Stav: nový, Punching force: 65 t Weight approx.: 1,600 kg Height: 1,880 mm Motor: 5.5 kW Width: 1,700 mm Blade length: 380 mm Throat depth: 305 mm Stroke: 55 mm - Equipped with one cylinder - 5 work stations: punching station, notching station, as well as flat, round, and angle steel cutting stations. Configuration includes: - Technical documentation - Hydraulic and electrical components from renowned manufacturers Dcodpfx Asttc Utogtjh - Foot pedal - Mode selector switch for setup and operational mode - Support table with stops at the notching and flat steel stations - Support table with stops at the punching station - CE-compliant version TECHNICAL SPECIFICATIONS / VALUES Punching force: 65 t Throat depth: 305 mm Stroke: 55 mm Strokes per minute (at 20 mm stroke): 25 Max. sheet thickness (Ø 26 x 20 mm): 20 mm Working height: 900 mm Cutting capacity: 375 x 15 mm; 300 x 20 mm Angle steel 45° (one leg): 70 x 70 x 10 mm Angle steel 90°: 120 x 120 x 12 mm Blade length: 380 mm Round: 45 mm Square: 45 mm Material thickness: 10 mm Width: 1,700 mm Depth: 950 mm Motor power: 5.5 kW Mains voltage: 400 V, 50 Hz Height: 1,880 mm Weight: 1,600 kg

Stav: nový, Sheet length: 3,200 mm Sheet thickness: 10.0 mm Total power requirement: 11 kW Weight approx.: 8,100 kg Dimensions (LxWxH): 4,000 x 1,950 x 1,900 mm Technical data: Sheet thickness: 10 mm Cutting length: 3,200 mm Cutting angle: 1.50° Backgauge: motorized, 1,000 mm Motor power: 11 kW Length: 4,000 mm Width: 1,950 mm Height: 1,900 mm Weight: 8,100 kg Equipment: Swing beam design NC preselection control ELGO P 40 T Touch with backgauge and cutting gap adjustment from the front via the control unit motorized backgauge up to 1,000 mm Dodpfxsd Ab Hne Agtoch clearly arranged control panel mounted on pivoting arm hydraulic hold-downs positioned close to the cutting edge foot switch cutting gap adjustment cutting line illumination wide support table with ball rollers foldable finger guard, 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot easy blade change and regrinding adjustable cutting length for economical processing lower blade with 4 cutting edges (reversible) upper blade with 2 cutting edges (reversible) qualified customer service Operating manual in ENGLISH Machine and equipment in accordance with CE regulations

Stav: nový, Dimensions (LxWxH): 1500 x 950 x 1680 mm Approx. Weight: 1,165 kg Total power requirement: 4 kW Square steel: 25 mm Round steel: 30 mm Punching force: 45 t Throat depth: 220 mm Flat bar shear: 200 x 15 mm or 300 x 12 mm Dcedsd Ab Hzopfx Agtsh Notching (Thickness x Width x Depth): 8 x 35 x 75 mm Punching – Round: 22 x 15 mm or 38 x 8 mm or 100 x 3 mm Angle iron cutting at 90° or 45°: 100 x 100 x 10 mm or 70 x 6 mm - With one hydraulic cylinder - 5 work stations: Punching station, notching station, flat bar, rod and angle steel cutting stations Execution includes: - Hydraulic and electrical components from renowned manufacturers - Foot pedal - CE compliance - Technical documentation - Selector switch for setup and operation mode - Support table with stops at the notching and flat bar stations - Support table with stops at the punching station Punching force: 45 t Throat depth: 175 mm Stroke: 50 mm Strokes per min. (at 20 mm stroke): 20 Max. sheet thickness: Ø 20 x 20 mm Working height: 900 mm Flat bar shear cutting capacity: 300 x 12 mm / 200 x 15 mm Angle steel 45° (1 leg): 70 x 70 x 6 mm Angle steel 90°: 100 x 100 x 10 mm Blade length: 316 mm Round material: 30 mm Square material: 25 mm Material thickness: 8 mm Width: 1,430 mm Depth: 950 mm Motor power: 4.0 kW Mains voltage: 400 V, 50 Hz Height: 1,680 mm Weight: 1,165 kg

Stav: nový, Dĺžka ohýbania: 2050 mm Hrúbka plechu: 4,5 mm Priemer horného valca: 140 mm Technické údaje: - Zadný valec poháňaný motorom - Zariadenie na kónické ohýbanie - Kalené a leštené valce - Celý rám z ocele St 52 Dsdpfjd Ab Nusx Agtjch - Hlavný motor s brzdovým systémom - Horný a spodný valec poháňané elektromotorom, prevodovkou a prevodovým systémom - Prenosný ovládací pult - Telo z liatiny - Pohyb zadného a spodného valca manuálne - V súlade s normami CE Možnosti: - Horný valec poháňaný elektromotorom EUR 1 260,-- - Digitálny displej na zobrazenie polohy zadného valca EUR 1 010,-- - Kalené valce EUR 1 489,-- - Špeciálne napätie EUR 480,-- - Stôl na podávanie materiálu - Spodný valec poháňaný elektromotorom Máme množstvo referencií!

Stav: nový, Dĺžka ohýbania: 2050 Hrúbka plechu: 1,8 Priemer hornej valca: 95 Dĺžka plechu: 2050 Technické údaje: - Telo z liatiny - Manuálne alebo motorické (voliteľné) ohýbanie - Po ohýbaní sa horný valec otvára do strany pre jednoduchšie vybratie materiálu - Zariadenie na kužeľové ohýbanie - Pohyb zadného a spodného valca hore a dolu manuálne ručným kolesom - Prenosný ovládací pult - V súlade s normami CE Voliteľné príslušenstvo: - Zadný valec s motorom - Digitálny ukazovateľ polohy zadného valca Dedpfx Aged Ab Tujtsch - Kryt tela EURO 432,-- - Kalené valce EURO 940,-- - Variabilná rýchlosť otáčania Máme veľa referencií!

Stav: nový, Bending length: 1550 mm Sheet thickness: 2.5 mm Top roller diameter: 90 mm Technical data: - Cast iron body - Manual or motorized (optional) bending - After bending, the top roller can be swung out to the side for easy removal of the material - Cone bending device - Adjustment of the rear and lower rollers up and down manually via handwheel - Portable control panel - In compliance with CE standards Options: Dodpfed Ab Twox Agtjch - Motorized rear roller - Digital display for indicating the rear roller position - Body cover EURO 362,-- - Hardened rollers EURO 650,-- - Variable rotation speed We have numerous references!

Stav: nový, Hrúbka plechu: 3 mm Ohýbacia dĺžka: 1250 mm Priemer horného valca: 90 mm Dĺžka plechu: 1250 mm Technické údaje: - Telo z liatiny - Ručné alebo motorové (voliteľné) ohýbanie - Po ohýbaní je možné horný valec vyklopiť do strany pre jednoduché vybratie materiálu - Zariadenie na kužeľové ohýbanie - Pohyb zadného a spodného valca hore a dole ručne pomocou ručného kolesa - Prenosný ovládací panel - Zodpovedá CE normám Pracovná dĺžka: 1250 mm Maximálna hrúbka plechu: Predohyb: 2,5 mm Ohýbanie: 3,0 mm Medza klzu: 240 N/mm² Počet valcov: 3 Priemer horného valca: 90 mm Minimálny ohýbací priemer: 130 mm Výkon motora: 1,1 kW Dĺžka stroja: 1950 mm Dedpsd Ab Tzsfx Agtsch Výška: 1130 mm Šírka: 900 mm Hmotnosť: 500 kg Možnosti: - Zadný valec s motorom: 825 EUR - Digitálny ukazovateľ polohy zadného valca: 1 010 EUR - Kryt stroja: 314 EUR - Kalené valce: 550 EUR Máme množstvo referencií!

Stav: nový, Ďalšie technické údaje na požiadanie. 3D systémové zváracie stoly Vyhotovenie pracovnej dosky: horná doska Viac informácií nájdete v katalógu/cenníku. Dcedpfed Aca Djx Agtoh

Stav: nový, Pressure: 80 Bending length: 2550 mm Frame gap: 2550 mm Installation height: 590 mm Stroke length (max.): 300 mm Dimensions (LxWxH): 3680x1960x2500 mm Weight approx.: 6100 kg Motor power: 11 kW CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-8025 Servo-motorised Press Brake REVOLUTION Servo-electric press brakes contain no hydraulic systems and, due to their flexibility and reliability, represent the technology of tomorrow. The higher speed and accuracy of this new generation of machines offers better efficiency, ergonomic features, and environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with a variety of models and tonnages, Dener is a pioneer in this technology, backed by extensive experience and quality. Standard equipment: KK-Industries is the general agent for DENER Group. We have assembled a high-quality model for the European market. The CNC servo-electric press brake by KK-Industries, made by DENER: Technological advantages, Model REVOLUTION DDM: - The CNC servo-electric press brake stands out for its high precision, accuracy, and versatile applications. - 100% electric, 0% hydraulic oil - Up to 50% less energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter - Full working length between the frames can be used - Reduced maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard equipment: - 3D color graphic control Delem 66T 17" touchscreen - CNC control of Y1, Y2, X, and R axes - CNC crowning via 3D control Dcsdpfod Etfwox Agtjh - X-axis 500 mm, R-axis travel 150 mm on 1.5 m and 2 m - X-axis 750 mm, R-axis travel 250 mm on all other press brakes - No compromise on upper tool and die: The CNC servo electric press brake KKI REVOLUTION is equipped with quality tools from EUROSTAMP Italy. - Split gooseneck upper tool - 4-V die block 60x60 mm (V= 16, 22, 35, and 50 mm) - Back gauge with servo motors, guided on linear rails and ball screws - A machine is only as good as the service behind it. That's why we emphasize highly qualified staff with years of experience in CNC sheet metal processing. - Laser safety device on the upper beam - CE safety equipment - Operating manual in GERMAN and ENGLISH Options: - Additional controlled back gauge axes: X1, X2, R, Z1, Z2, Delta X - ATF Type 6-axis back gauge, X1, X2, R Type back gauge - X-Prime Type back gauge, hydraulic upper and lower tool clamping - CNC 3D touchscreen control DELEM DA-69T We recommend the following options: - Manual crowning €2,329 - CNC crowning €4,658 KK-Industries GmbH

Stav: nový, Tlak: 60 Motor: 11 Montážna výška: 450 mm Zdvih (max.): 400 mm Veľkosť stola: 600 x 500 x 80 mm Pracovná plocha piestu: 600 x 500 x 90 mm Dsdpfjmmuq Iox Agtjch Výška stola: 850 mm Rozmery (DxŠxV): 1 300 x 2 000 x 2 700 mm Hmotnosť cca: 4 000 kg Objem olejovej náplne: 200 l Ovládanie / Kľúčový vypínač: 1. Nastavovací režim manuálne bez svetelného senzora (max. 10 mm/sek. rýchlosť) 2. Automatický režim (plná rýchlosť) so svetelným senzorom Hlavný valec: Ø 150 mm Pomocné valce: 2 ks Ø 60 x 40 mm Pomocné vedenia: 2 ks Ø 40 mm Motor: 7,5 kW – 11 hp (IE-3) Čerpadlo: 18 cc – 26 l/min / ASC Rýchlosti: Predný posun 110 mm/sek – spätný chod 120 mm/sek – Lisovací zdvih: 11 mm - 5/sek Montážna výška: 500 mm Zdvih: 400 mm Stolová doska: 600 x 500 x 80 mm (s T-drážkami) Piestová doska: 600 x 500 x 90 mm (s T-drážkami) Výška stola: 850 mm (od podlahy po hornú hranu stola) ----- Hydraulické príslušenstvo: Hydraulický kontrolný blok a príslušenstvo: REXROTH Nastavenie tlaku cez PLC (10 – 60 ton) Nastavenie rýchlosti cez PLC Vzduchový chladič Plniaci ventil Príslušenstvo k riadeniu: Siemens S7-1200 Hlavná rozvodná skriňa Otočný obslužný panel Bezpečnostné PLC – SICK Svetelné senzory SICK 700 + 150 mm Lineárny odmeriavací pravítko na nastavenie zdvihu 7” PLC displej – Siemens (nemčina & angličtina) Pohyblivé dvojručné ovládanie Ethernet pripojenie pre diaľkovú údržbu Výstražný hlásič porúch (svetelný & zvukový) 2-násobné pracovné osvetlenie 8 voľných vstupov/výstupov na PLC pre externé pripojenie Stroj spĺňa smernice o strojných zariadeniach Hydraulické proporcionálne ventily Dvojkanálové zabezpečenie káblov Návod na obsluhu a zoznam dielov (nemčina) Bočné bezpečnostné dvere (dvere posuvné smerom dozadu)

Stav: nový, Sheet length: 4,000 mm Sheet thickness: 20.0 mm Cutting width: 4,000 mm Total power requirement: 22 kW Weight approx.: 20,000 kg Dimensions (LxWxH): 4,850 x 2,300 x 2,180 mm Technical Specifications: Sheet thickness: 20 mm Cutting length: 4,000 mm Cutting angle: 2.30° Djdpfx Agoxxd D Uetsch Back gauge: motorized, 1,000 mm Motor power: 22 kW Length: 4,850 mm Width: 2,300 mm Height: 2,180 mm Weight: 20,000 kg Equipment: Swing beam design NC pre-selection control ELGO P 40 T Touch With back gauge and cutting gap adjustment from the front via the control unit Motorized back gauge up to 1,000 mm Clear control panel mounted on swivel arm Hydraulic hold-downs positioned close to the cutting edge Foot switch Cutting gap adjustment Cutting line illumination Wide support table with ball transfers Foldable finger guard, 1,000 mm 1 side gauge with T-slot 2 sheet support arms with T-slot Easy replacement and regrinding of blades Adjustable cutting length for efficient processing Lower blade can be used on 4 edges Upper blade can be used on 2 edges Qualified customer service Operating manual in ENGLISH Machine and equipment conform to CE regulations

Stav: nový, Dĺžka plechu: 1360 mm Hrúbka plechu: 6 mm Rozmery (D x Š x V): 2050 x 2250 x 1400 mm Motor: 7,5 kW Hmotnosť cca: 2300 kg Štandardné príslušenstvo: - NC riadenie - Programovateľný, motorizovaný zadný doraz s pojazdom 750 mm Dcsdpfogickksx Agtsh - Osvetlenie tieniacej línie - 1 kus dorazovej lišty s meradlom - 2 kusy podperných ramien na plechy - 1 kus podperného ramena na plechy (pri modeloch 1106, 1306, 1505) - Ochrana prstov - Guľôčkový transportný pás - Jednoduché nastavenie medzery nožov spredu - Guľôčkový skrutkový mechanizmus - Počítadlo rezov - Prenosný nožný pedál s havarijným vypínačom - Svetelná závora na zadných bezpečnostných krytoch

Stav: nový, Bending length: 1600 mm Sheet thickness: 6 mm Top roller diameter: 140 mm Technical data: Dcjdpfx Aed Ab Ntsgtoh - Rear roller driven by motor - Cone bending device - Hardened and polished rollers - Entire body made of St 52 steel - Asymmetric design for optimal bending results - Top and bottom rollers driven by brake motors and planetary gearboxes in the transmission - Portable control panel - Complies with CE standards Options: - Bottom roller driven by electric motor EURO 1,512 - Digital display for rear roller position EURO 1,010 - Extended rollers EURO 966 - Profile rollers EURO 1,190 We have numerous references!

Stav: nový, Hrúbka plechu: 1,8 mm Dĺžka ohybu: 2050 mm Priemer horného valca: 95 mm Technické údaje: - liatinové telo - manuálne alebo motorové (voliteľné) ohýbanie Djdpfed Ab Tvsx Agtoch - po ohýbaní je možné horný valec vyklopiť do strany pre jednoduché vybratie materiálu - zariadenie na kužeľové ohýbanie - pohyb zadného a spodného valca hore-dolu manuálne pomocou ručného kolesa - prenosný ovládací pult - v súlade s normami CE Voliteľné príslušenstvo: - zadný valec s pohonom, EURO 825,-- - digitálny ukazovateľ polohy zadného valca, EURO 1.010,-- - kryt tela, EURO 432,-- - tvrdené valce, EURO 940,-- Máme množstvo referencií!

Stav: nový, Dĺžka ohybu: 1250 mm Hrúbka plechu: 3 mm Priemer hornej valcovej rolky: 90 mm Technické údaje: - Liatinové telo - Manuálne alebo motorové (voliteľné) ohýbanie - Po ohýbaní je možné hornú valcu vyklopiť na stranu pre jednoduché vybratie materiálu - Zariadenie na kužeľové ohýbanie - Pohyb zadnej a spodnej valce manuálne ručne kolesom hore a dolu - Prenosný ovládací pult - V súlade s CE normami Voliteľná výbava: - Motorizovaná zadná valca Dcjdpfxod Ab Tyo Agtsh - Digitálny displej na zobrazenie polohy zadnej valce - Kryt tela EURO 314,-- - Kalené valce EURO 550,-- - Premenlivá rýchlosť otáčania Máme veľa referencií!

Stav: nový, Ďalšie technické údaje na požiadanie Technické špecifikácie: Rám stroja je vyrobený z vysokopevných materiálov elektrozváraním a pre obrábaním bol žíhaný na odstránenie pnutí, aby sa dosiahla potrebná presnosť výroby pre citlivý lemovací proces. Horný a dolný držiak hlavíc sa pohybujú po hlavnej konštrukcii rámu, čo zaručuje tuhosť a nižšie vibrácie počas lemovania. Obe, horný aj dolný držiak hlavíc, sú poháňané hydraulickými motormi pre vertikálny pohyb a hlavu upínajú pomocou hydraulických valcov. Vreteno kolies je poháňané radiálnymi piestovými hydraulickými motormi pre vysoké otáčky a vysoký krútiaci moment. Lemovacia kladka je poháňaná tromi valcami v zvislom a vodorovnom smere a pohybuje sa medzi dvoma hlavnými časťami rámu. Oba valčeky sú vyrobené zo špeciálnej zliatiny zaručujúcej dlhú životnosť a vysokú odolnosť proti korózii. Centralizovaný systém mazanía. Spodné podperné valčeky sú poháňané hydraulickými valcami, aby podopierali hlavu počas lemovania. Hydraulický systém pozostáva z radiálno-piestového čerpadla, ukazovateľa hladiny oleja v nádrži, filtra so signálom znečistenia a komponentov renomovaných medzinárodných značiek. Voliteľná výbava: Dcjdjd Ab U Ujpfx Agtjh Máme mnoho referencií!

Stav: nový, Pressure: 65 Bending length: 2550 mm Distance between uprights: 2550 mm Installation height: 590 mm Stroke length (max.): 300 mm Dimensions (LxWxH): 3680x1960x2500 mm Weight approx.: 5500 kg Motor power: 11 kW Djdpfxjd Etfxe Agtech CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-6525 Servo-driven Press Brake REVOLUTION Servo-electric press brakes contain no hydraulic system and are the technology of tomorrow thanks to their flexibility and reliability. The increased speed and precision of this new generation of machines provide higher efficiency, ergonomic features, and an eco-friendlier production technology. As the first manufacturer of servo-electric press brakes in various models and tonnages, Dener is a pioneer in this technology, backed by extensive experience and quality. Standard Equipment: KK-Industries is the exclusive representative of the DENER group. We have developed a high-quality model for Europe: The CNC Servo Electric Press Brake by KK-Industries, manufactured by DENER: Technological Advantages – Model: REVOLUTION DDM The CNC Servo Electric Press Brake stands out for its high precision, accuracy, and versatile application capabilities. - 100% electric, 0% hydraulic oil - Up to 50% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter - Full frame length usable - Reduced maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard Equipment: - 3D color graphic control Delem 66T 17" touchscreen - Y1, Y2, X, and R axes CNC-controlled - CNC crowning via the 3D controller - X-axis 500 mm, R-axis stroke 150 mm on 1.5 m and 2 m versions - X-axis 750 mm, R-axis stroke 250 mm for all other press brakes We also make no compromises with the upper tool and die and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tooling from EUROSTAMP Italy: - Segmented gooseneck upper tool - 4-V die block 60x60 (V = 16, 22, 35, and 50 mm) - Backgauge driven by servomotors on linear guides and ball screws Naturally, any machine is only as good as its service. For this reason, we focus on highly qualified staff with extensive experience in CNC sheet metal processing. - Laser safety system on the upper beam - CE-compliant safety equipment - Operating manual in GERMAN and ENGLISH Options: - Additional backgauge-controlled axes: X1, X2, R, Z1, Z2, Delta X - ATF type 6-axis backgauge, X1, X2 – R type backgauge - X-Prime type backgauge - Hydraulic upper and lower tool clamping for tools - CNC 3D touchscreen controller DELEM DA-69T KK-Industries GmbH

Stav: nový, Pressure: 175 Bending length: 3570 mm Distance between side frames: 3570 mm Installation height: 590 mm Dedod Etf Depfx Agtsch Stroke length (max.): 300 mm Dimensions (LxWxH): 5340x2100x2680 mm Weight approx.: 11,500 kg Motor power: 22 kW CNC crowning via control: yes CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-17535 Servo-driven Press Brake REVOLUTION Servo-electric press brakes do not contain a hydraulic system and, due to their flexibility and reliability, represent tomorrow's technology. The higher speed and precision of this new generation of machines offer you improved efficiency, ergonomic features, and eco-friendly production technology. As the first manufacturer of servo-electric press brakes with various models and tonnages, Dener is a pioneer of this technology, backed by extensive experience and quality. Standard equipment: KK-Industries holds the exclusive representation for the DENER group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER offers: Technological advantages: Model REVOLUTION DDM - 100% electric, 0% hydraulic oil - Up to 50% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speeds and significantly quieter operation - Full-length utilization between the frames - Lower maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending sequences directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard features: - 3D color graphical control Delem 66 T 17" touch screen - Y1, Y2, X, and R axes CNC-controlled - CNC crowning via the 3D control - X-axis 500 mm, R-axis stroke 150 mm on 1.5 m and 2 m machines - X-axis 750 mm, R-axis stroke 250 mm on all other press brakes - No compromises when it comes to top tools and dies: fitted with premium tooling from EUROSTAMP Italy - Segmented gooseneck upper tool - 4-V die block 60x60 (V= 16, 22, 35, and 50 mm) - Back gauge with servo motors, linear guides, and ball screw - Laser safety device on the upper beam - CE-compliant safety equipment - Operating manual in GERMAN and ENGLISH Of course, every machine is only as good as its service. For this reason, we focus on highly qualified staff with extensive experience in CNC sheet metal processing. Options: - Additional controlled axes for the back gauge: X1, X2, R, Z1, Z2, Delta X - ATF type 6-axis back gauge, X1, X2, R type back gauge - X-Prime type back gauge - Hydraulic upper and lower tool clamping for tools - CNC 3D touchscreen control DELEM DA-69T KK-Industries GmbH

Stav: nový, Working area: 2000 x 6000 Loading capacity: 1450 X-axis travel: 2020 mm Y-axis travel: 6050 mm Laser power: 4 kW Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Weight approx.: 11,500 kg Dimensions (LxWxH): 10,000 x 4,400 x 2,120 mm The FLC series is a fast, precise, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting machine with premium-class standards. Capable of handling up to 30,000 W laser power, it is an excellent choice for cutting thick plates. FLC fiber laser cutting machines are commonly used in the manufacturing of agricultural machinery, textile machines, food processing equipment, construction machinery, elevators, and other large-scale machines and systems. It is an ideal cutting machine for anyone looking to outsource cutting operations. Features wireless remote control for easy blowing, cutting, pausing, calibration simulation, and more. Standard nesting software quickly and automatically prepares parts for cutting without operator intervention. It also includes a flycut function. Equipped with a dual exchange table, enabling continuous operation without downtime. All our machines are manufactured to European standards and come with a CE certificate. FLC-type machines feature nozzle cleaning and a dual camera system. Available with cutting areas of 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head offers auto-focus and active anti-collision functionality, as well as Auto-View for obstacle recognition and automatic movement. Cutting heads have automatic cooling. All our machine bridges are made from single-piece, welded aluminum alloy sheet construction. This design ensures stiffness and maintains shape under shocks, overlaps, or heavy loads. Compared to steel profile bridges, they are three times lighter, allowing for higher speeds and acceleration with lower motor power demand. Included accessories: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19-inch touchscreen CNC control - Fly cutting - Nozzle and lens starter kit - Parts debris drawers - Automatic table changer - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera system Dedpfx Agjruwccotech

Stav: nový, Pressure: 40 Bending length: 1300 Distance between uprights: 1300 Installation height: 375 Stroke length (max.): 150 Dimensions (LxWxH): 1880 x 2435 x 2320 mm Weight approx.: 3400 Motor power: 2 x 3.8 Electric Ball Screw CNC Press Brake KKI Model: REVOLUTION B-Servo 1550 mm x 40 t Standard equipment: KK-Industries is the general representative for the DENER group of companies. We have assembled a high-quality model for Europe. The CNC servo-electric press brake from KK-Industries, manufactured by DENER: Technological advantages: Model REVOLUTION B-Servo 1550 mm 40 t High speeds with ball screw drive The CNC servo-electric press brake is characterized by its high precision, accuracy, and versatile range of applications. - 100% electric, 0% hydraulic oil - Up to 40% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter - Lower maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Technical Specifications Bending Length (B) 1550 mm Bending Capacity (press force) 40 tons Maximum Stroke 150 mm Daylight Opening (installation height, Q) 375 mm Approaching Speed 150 mm/s Bending Speed 20 mm/s Return Speed 150 mm/s Power 2 x 3.8 kW Weight 3400 kg Overall Length (A) 1880 mm Width (C) 2435 mm Height (D) 2320 mm KK-Industries GmbH Dsdjd H Hh Hepfx Agtoch There’s something for everyone!

Stav: nový, Sheet length: 3,200 mm Sheet thickness: 10 mm Cutting width: 3,200 mm Total power requirement: 15 kW Weight approx.: 7,700 kg Dimensions (LxWxH): 3,800 x 1,820 x 1,920 mm Dcjdpevap Thjfx Agteh Technical Data: Sheet thickness: 10 mm Cutting length: 3,200 mm Cutting angle: 1.30° Back gauge: motorized, 1,000 mm Motor power: 15 kW Length: 3,800 mm Width: 1,820 mm Height: 1,920 mm Weight: 7,700 kg Equipment: Swing cut design NC pre-selection control ELGO P 40 T with back gauge and cutting gap adjustment from the front via the controller motorized back gauge up to 1,000 mm clearly arranged control panel mounted on swing arm hydraulic hold-downs positioned close to the cutting edge foot pedal cutting gap adjustment cutting line illumination wide support table with ball inserts foldable finger guard, 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot simple blade changing and regrinding adjustable cutting length for efficient processing lower blade with 4 cutting edges upper blade with 2 cutting edges qualified customer service Operating manual ENGLISH Machine and equipment comply with CE regulations

Stav: nový, Sheet length: 3,200 mm Sheet thickness: 16 mm Cutting width: 3,200 mm Total power requirement: 22 kW Weight approx.: 10,600 kg Dimensions (LxWxH): 3,800 x 1,950 x 2,080 mm Technical data: Sheet thickness: 10 mm Cutting length: 3,200 mm Cutting angle: 1.30° Back gauge: motorised, 1,000 mm Motor power: 22 kW Length: 3,800 mm Width: 1,950 mm Height: 2,080 mm Weight: 10,600 kg Equipment: Swing beam shear design NC preselection control ELGO P 40 T with back gauge and cutting gap adjustment from the front via the control unit Motorised back gauge up to 1,000 mm Dcjdsvap Tnspfx Agtoh Clearly arranged control panel mounted on a swivel arm Hydraulic hold-downs positioned close to the cutting edge Foot switch Cutting gap adjustment Cutting line illumination Wide support table with ball transfers Folding finger guard, 1,000 mm 1 side gauge with T-slot 2 sheet support arms with T-slot Easy blade changing and regrinding Adjustable cutting length for cost-efficient machining Lower blade with 4 cutting edges Upper blade with 2 cutting edges Qualified customer service Operating manual in ENGLISH Machine and equipment compliant with CE regulations

Stav: nový, Tlak: 100 Valec: nehybný Zdvih: 350 Šírka stojana: 1050 Pracovná rýchlosť: 2 Dsdpfowwng Hjx Agtech Rýchloposuv: 28 Dĺžka: 1900 Šírka: 850 Výška: 2250 Hmotnosť cca: 1030 Výškovo nastaviteľná pracovná doska – pohodlne nastaviteľná pomocou reťaze Bezpečné dvojručné ovládanie – komfortné ovládanie pomocou ručnej páky a tlačidla Nastaviteľný maximálny tlak – individuálne prispôsobiteľný pre rôzne aplikácie Integrovaný manometer – umožňuje presné sledovanie tlaku počas prevádzky Vyhotovenie v súlade s CE – vyrobené podľa aktuálnych bezpečnostných a kvalitatívnych noriem Prevádzkový návod – podrobný a zrozumiteľný, dostupný v nemčine a angličtine Dve pracovné rýchlosti – pre obzvlášť presnú a efektívnu prácu Obrázok je ilustračný

Stav: nový, Pressure: 1500 Cylinder: fixed Stroke: 350 mm Frame width: 1500 mm Working speed: 3 mm/s Rapid traverse: 22 mm/s Length: 2500 mm Width: 1200 mm Height: 2500 mm Weight approx.: 2450 kg Height-adjustable work table – convenient adjustment via chain Safe two-hand operation – comfortable control via hand lever and push button Dsdpfx Agswwnhdjtech Adjustable maximum pressure – can be individually set for various applications Integrated pressure gauge – enables precise pressure monitoring during operation CE-compliant design – manufactured according to current safety and quality standards Operating manual – comprehensive and easy to understand, available in German and English Two working speeds – for particularly precise and efficient operation The image is a sample photo.

Stav: nový, Tlak: 40 Valec: nepohyblivý Zdvih: 350 Šírka stojana: 900 Pracovná rýchlosť: 4 Dĺžka: 1600 Šírka: 700 Výška: 2050 Približná hmotnosť: 430 Dcodpfowwnhqsx Agtjh Výškovo nastaviteľný pracovný stôl – pohodlné nastavenie pomocou reťaze Bezpečné ovládanie oboma rukami – pohodlné ovládanie ručnou pákou a tlačidlom Nastaviteľný maximálny tlak – individuálne nastaviteľné pre rôzne aplikácie Integrovaný manometer – umožňuje presné sledovanie tlaku počas prevádzky Vyhotovenie v súlade s CE – vyrobené podľa aktuálnych bezpečnostných a kvalitatívnych noriem Prevádzkový návod – podrobný a zrozumiteľný, dostupný v slovenčine a angličtine Dve pracovné rýchlosti – pre obzvlášť precízne a efektívne práce Obrázok je ilustračný