Weiler Príslušenstvo Weiler E30 kúpiť použité (19 337)

Stav: dielensky repasované (použité), Funkcionalita: plne funkčný, otvor vretena: 40 mm, výška stredu: 160 mm, šírka v strede: 650 mm, Dear Sir or Madam, For sale is a Weiler Praktikant 160B lathe equipped with a brand new K+C 3-axis digital readout (including 12-month manufacturer’s warranty). The machine is extensively partially overhauled in our workshop, ensuring it is in excellent technical and optical condition. All guideways are in good condition, the gearboxes run quietly, and the levers operate smoothly. You are welcome to visit us on site and inspect the machine’s condition for yourself. Availability: on request Center height: 160 mm Center distance: 650 mm Spindle bore: Ø 40 mm Tailstock taper: MK3 Quill travel: 85 mm Longitudinal carriage feed range: 0.020 – 0.630 mm/rev Cross slide feed range: 0.006 – 0.200 mm/rev Possible thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitch range: 0.25 – 8 mm Spindle brake: switchable Total connected load: 7.5 kVA Voltage: 400V Dimensions: approx. 1.58 x 0.9 x 1.5 m (L x H x W) Weight: approx. 720 kg Further equipment and accessories: NEW 3-axis digital readout, coolant system, chuck guard, leadscrew & feed shaft cover, 2x emergency stop, operating manual, and much more on request... Our service promise to you: Lsdpfxowhzdms Alcert - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and, if required, worn parts are replaced beforehand - Upon request, we can perform a full or partial overhaul of the selected machine - Upon request, we can repaint the selected machine in your preferred color - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories such as safety devices, etc. - We are happy to arrange shipping and/or installation as needed

Stav: dielensky repasované (použité), Funkcionalita: plne funkčný, výška stredu: 160 mm, šírka v strede: 650 mm, otáčky (max.): 4 000 ot./min, Výbava: otáčky plynule nastaviteľné, Vážené dámy a páni, na predaj ponúkame sústruh typu Weiler Primus VC / Praktikant VC. Táto modelová rada sa vyznačuje najmä ovládacím panelom Siemens a úplne plynulou reguláciou otáčok. Ako už názov napovedá, séria VC umožňuje prácu s konštantnou rezacou rýchlosťou. Stroj je v našej dielni rozsiahlo čiastočne repasovaný, takže je po technickej aj vizuálnej stránke vo výbornom stave. Všetky vedenia sú v poriadku, prevodovky bežia ticho a páky idú ľahko prepínať. O stave stroja sa môžete presvedčiť osobne priamo u nás. Dostupnosť: na vyžiadanie Výška hrotu: 160mm Vzdialenosť medzi hrotmi: 650mm Priemer vŕtania vretena: Ø 40mm Upínací kužeľ koníka: MK3 Pinolový zdvih: 85mm Možné typy závitov: metrický, palcový, modul, diametrálny pitch Metrické stúpania závitov: 0,25 - 8 mm Brzda vretena: pripojiteľná Napätie: 400V Rozmery: cca 1,60x1,00x1,50 m (DxVxŠ) Hmotnosť: cca 750 kg Ďalšie vybavenie a príslušenstvo: Ovládací panel Siemens, chladiace zariadenie, ochrana skľučovadla, kryt vodiaceho a ťažného vretena, 2x núdzové vypnutie, návod na obsluhu, vyhlásenie o zhode CE, na želanie mnoho ďalšieho... Naša servisná ponuka pre vás: - Sme certifikovaná majstrovská dielňa v oblasti strojárstva - Všetky stroje sú minimálne dielensky testované - Všetky mazivá a prípadne opotrebované diely sú pred odovzdaním vymenené - Na želanie vám vybraný stroj kompletne alebo čiastočne zrenovujeme - Na želanie vám vybraný stroj nanovo nalakujeme vo farbe podľa vášho výberu Lrsdpjwhx I Nofx Alcjt - Na želanie si môžete objednať aj ďalšie príslušenstvo ako náradie a pod. - Na želanie môžeme namontovať ďalšie príslušenstvo, ako bezpečnostné zariadenia a pod. - Radi zabezpečíme prepravu a/alebo inštaláciu stroja

Stav: použitý, L + Z lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2581 Year of manufacture 1984 Centre distance 1000 mm Swing over bed 420 mm Centre height over bed 210 mm Swing over cross slide 240 mm Centre height over cross slide 120 mm Spindle bore 52 mm Spindle speeds 33 - 1500 rpm, 12 steps Chuck flange Short taper DIN 55027 size 6, 4x M12 Tailstock taper MK 4 Motor power 5.5 kW Power supply 380 Volt, 50 Hz - Spindle speeds via 12-step gearbox - 3-jaw scroll chuck AROWA Ø 200 mm (only one set of top jaws) - Multifix quick-change toolpost size B with 3 tool holders - Automatic longitudinal and cross feed Lredpfeyah Rvsx Alcjt - Coolant system - Spindle brake - Emergency stop - Splash guard - Fixed steady rest Ø 160 mm - Machine lamp - Operating manual Space requirement L x W x H 2200 x 1200 x 1450 mm Weight 1500 kg In very good condition

Stav: použitý, L + Z lathe WEILER type Praktikant 800R Machine no.: 3315 Year of manufacture: 1984 Centre distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Centre height over bed: 140 mm Centre height over cross slide: 80 mm Spindle bore: 36 mm Feeds: longitudinal and facing Chuck fitting: short taper DIN 55027 size 5, 4x M10 Tailstock quill taper: MK 3 Tailstock quill travel: 90 mm Spindle speed: 42 - 2000 rpm Drive power: 1 / 1.6 kW Power supply: 380 Volt, 50 Hz - Spindle speeds via 2 motor speeds and 8 gear stages - 3-jaw scroll chuck RÖHM ZS Ø 160 mm with 1 set of stepped jaws - MULTIFIX size A quick-change tool post with 3 tool holders - Emergency stop - Hinged chuck guard - Operating manual with electrical diagram Space requirement L x W x H: 1900 x 700 x 1300 mm Lrjdpfxsyr R Dcj Alcjt Weight: 560 kg Good condition

Stav: použitý, L + Z lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine no. 1-004/2552 Year of manufacture: 1983 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Ledpfxeykca Hs Alcsrt Spindle speeds: 33 - 1500 rpm, 12 steps Chuck flange: Short taper DIN 55027 size 6, 4x M12 Tailstock taper: MT 4 Motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle speeds via 12-speed gearbox - 3-jaw scroll chuck EMCO Ø 200 mm with standard and inside-out jaws - Multifix quick-change tool post size B with 3 tool holders - Automatic longitudinal and cross feed - Coolant system - Spindle brake - Emergency stop - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1400 kg Very good condition

Stav: použitý, L + Z Lathe WEILER Type Praktikant 800R Machine No. 3309 Year of manufacture: 1984 Centre distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Centre height over bed: 140 mm Centre height over cross slide: 80 mm Spindle bore: 36 mm Feed: longitudinal and facing Chuck mount: short taper DIN 55027 size 5, 4x M10 Tailstock taper: MK 3 Quill travel: 90 mm Spindle speed: 42 - 2000 rpm Drive power: 1 / 1.6 kW Power supply: 380 volts, 50 Hz - Spindle speed via 2 motor speeds and 8 gearbox steps Lsdpfjyg Rfiox Alcert - 3-jaw scroll chuck BILSING Ø 160 mm with 1 set of stepped jaws and 1 set of soft jaws - Quick-change toolholder MULTIFIX size A with 3 tool cassettes - Live centre - Emergency stop - Hinged chuck guard - Coolant system - Operating manual with wiring diagram - Very few operating hours Required space (L x W x H): 1900 x 700 x 1300 mm Weight: 600 kg Very good condition

Stav: použitý, L + Z sústruh WEILER typ Condor 81 A Výrobné číslo: 36553 Rok výroby cca 1985 Vzdialenosť medzi hrotmi: 750 mm Priemer sústruženia nad ložom: 330 mm Výška hrotu nad ložom: 165 mm Priemer sústruženia nad suportom: 180 mm Výška hrotu nad suportom: 90 mm Priemer vretena: 40 mm Upínanie skľučovadla: krátky kužeľ DIN 55027 veľ. 5 Kužeľ voči koníku: MK 3 Vysunutie púzdra koníka: 110 mm Otáčky vretena: 45 - 2800 ot./min, 16 stupňov Výkon pohonu: 3 kW Napájanie: 400 Volt, 50 Hz - Otáčky vretena v 16 prevodových stupňoch - 3-čeľusťové skľučovadlo Ø 160 mm RÖHM s vŕtacími a sústružníckymi čeľusťami - Rýchloupínací držiak nožov Multifix veľkosť B s 3 držiakmi - Automatický posuv pozdĺžny a čelné Lredpfx Aok S Ht Aolcjt - Elektromechanická brzda vretena - Núdzové zastavenie - Nádrž chladiacej kvapaliny s čerpadlom v podstavci stroja, bez prívodu do pracovnej oblasti - Sklápací kryt skľučovadla - Ochrana proti striekaniu - 1 kus otočný centrovací hrot - Elektrická schéma a návod na obsluhu Pôdorysné rozmery D x Š x V: 1850 x 950 x 1400 mm Hmotnosť: 1100 kg Dobrý stav

Stav: dobrý (použitý), Rok výroby: 1992, LZ sústruh WEILER Typ: PRAKTIKANT 160 B, r.v. 1992 s 3-osým digitálnym odpočtom Heidenhain, skľučovadlo 160 mm RÖHM, držiak nástrojov Multifix B, koník s hrotom, upínacie zariadenie s upínacími púzdrami od 1 do 29,5 mm, chladiace zariadenie. Točenie nad lôžkom: 320 mm Točenie nad suportom: 198 mm Dĺžka točenia: 650 mm Vrtanie vretena: 40 mm Otáčky vretena: 96 - 2500 ot./min Lsdsy Rpr Repfx Alcert Ďalšie údaje viď karta stroja. Vedenia sú v dobrom stave, dokumentácia stroja je k dispozícii.

Stav: použitý, Rok výroby: 1970, Weiler sústruh s koníkom Lsdjhtnu Tspfx Alcjrt

Stav: veľmi dobrý (použitý), Rok výroby: 1992, Funkcionalita: plne funkčný, Weiler Matador VS-2 Leadscrew and Feedshaft Lathe with NEW 3-Axis Digital Readout by K&C, Special Light Grey Paintwork!!! Technical Specifications: >> Machine No. 92-027, Year of manufacture: 1992 Lodpfxjyylq Ue Alcort >> Centre height: 140 mm >> Distance between centres: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 12 mm >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and Equipment: >> NEW K&C 3-axis digital readout, 12 months manufacturer’s warranty, with instruction manual Functions: Switching mm/inch, ABS/INC coordinates, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction reversal >> 1 3-jaw chuck, 1 set of jaws >> 1 4-jaw chuck, 1 set of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the Machine: For sale is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully operational and has been newly painted in light grey. A really nice machine. The 3-axis digital readout from K&C has been retrofitted. All scales are brand new and equipped with protective covers to guard against dirt. All slides move smoothly and uniformly. Take the opportunity to view this machine under power on site and see the condition for yourself.

Stav: veľmi dobrý (použitý), Rok výroby: 1992, Funkcionalita: plne funkčný, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C NEW in special light grey paintwork!!! Technical data: >> Machine no. 92-029 Year of manufacture: 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Speed range: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper: MK 3 >> Feeds from 0.012 to 0.9 mm/rev Ljdoyylqhepfx Alcert >> Thread types possible: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and features: >> 3-axis digital display from K&C, new, 12-month manufacturer's warranty, with operating manual Functions: mm/inch toggle, coordinate selection ABS/INC, value halving, reference mark, tool program for 200 tools, taper calculation, radius/diameter, quick zeroing, counting direction switch >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 2 sets of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been freshly repainted in light grey. A very nice machine. The 3-axis digital readout from K&C has been retrofitted. All scales are new and fitted with protective covers to shield them from dirt. The slides run smoothly and evenly. Take the opportunity to view and test the machine under power on site to convince yourself of its condition.

Stav: veľmi dobrý (použitý), Rok výroby: 1998, Funkcionalita: plne funkčný, číslo stroja/vozidla: 4397, Dear Sir or Madam, For sale is a Weiler Praktikant 160 AC lathe, year of manufacture 1998, equipped with the original Weiler 3-axis digital readout. This newer "AC" variant particularly stands out thanks to its infinitely variable speed control, which makes working on this already user-friendly machine even easier. The machine has been extensively partially overhauled in our workshop, so it is in excellent technical and visual condition. All guides are in good condition, the gearboxes run quietly and the levers shift smoothly. You are welcome to visit us and see the machine’s condition for yourself. Availability: on request Machine No.: 4397 Year of manufacture: 1998 Centre height: 160mm Centre distance: 650mm Spindle bore: Ø 40mm Spindle speed: 20–3000 rpm, stepless Tailstock taper: MT3 Quill travel: 85mm Lredpsq H D U Esfx Alcet Longitudinal feed range: 0.020 – 0.630 mm/rev Cross slide feed range: 0.006 – 0.200 mm/rev Thread cutting types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.25 – 8mm Spindle brake: switchable Total power requirement: 7.5 kVA Voltage: 400V Dimensions: approx. 1.58 x 0.9 x 1.5 m (LxHxW) Weight: approx. 720 kg Further equipment and accessories: 3-axis DRO, coolant system, chuck guard, jaw chuck, and additional accessories on request… Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - If requested, we can fully or partially overhaul your selected machine - If requested, we can repaint your chosen machine in your desired colour - If requested, you can order additional accessories such as tools directly - If requested, we can mount further accessories such as safety devices - We are happy to take care of shipping and/or installation for you

Stav: veľmi dobrý (použitý), Rok výroby: 1992, Funkcionalita: plne funkčný, Weiler Matador VS-2 lead and feed screw lathe with K&C 3-axis digital readout NEW, in special light grey paint! Technical Data: >> Machine No. 92-028 Year of manufacture: 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Speed range: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread types possible: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Lrodpfx Aljyyb T Secet Accessories and Equipment: >> K&C 3-axis digital readout, new, with 12-month manufacturer’s warranty and user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, direction switching >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 1 set of jaws >> Electronic spindle guard >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The K&C 3-axis digital readout has been retrofitted. All scales are new and equipped with protective covers to guard against dirt. All carriage movements are smooth and even. Take the opportunity to view and test this machine under power on site and see its condition for yourself.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 Machine No. 1191 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev Ledpfx Aljvtp Edscort >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Equipment and Accessories: >> 1 x 125 mm three-jaw chuck with 2 sets of jaws >> Collet chuck system with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is of course fully functional. The slides all operate very smoothly and evenly. The Weiler also runs quietly at high spindle speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and is capable of producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and verify its condition for yourself.

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Weiler Praktikant 160B Precision Centre Lathe, 3-Axis K&C Digital Readout NEW. Refurbished with certification protocol for new-machine tolerances. Technical Data: >> Machine No.: 87 160 760 >> Centre height: 160 mm Lrjdpfxjvrdlce Alcot >> Centre distance: 650 mm >> Spindle speeds: from 24 to 2,500 rpm >> Spindle bore: 40 mm >> Short-taper spindle nose, DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, imperial, module and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake engageable >> Length: 1.6 m, Height: 1.25 m, Depth: 0.7 m Accessories & Equipment: >> 3-axis digital readout system from K&C, new, with 12-month manufacturer warranty and user manual Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> New collet chuck, NEW collets from 3 to 25 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electronic spindle guard >> New LED machine lamp >> New machine feet >> Splash guard >> Operating manual, spare parts diagram (PDF) About the machine: Offered for sale is a Weiler Praktikant 160 B engine and leadscrew lathe in toolroom precision, fully overhauled geometrically. Refurbished with acceptance protocol for new-machine tolerances. For safety: Electronic work spindle protection, covers for leadscrew and feed shaft, 2 emergency stop buttons, and a braked motor. This newer generation of Weiler lathes is very user-friendly and allows production of ground-like surface finishes. You are welcome to inspect the machine under power at our premises and see the condition for yourself.

Stav: veľmi dobrý (použitý), Rok výroby: 1991, Funkcionalita: plne funkčný, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout – Excellent Condition!!! Technical Data: >> Year of manufacture: 1991, Machine No. 3140 >> Centre height: 180 mm >> Distance between centres: 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55027 size 6 with bayonet lock >> Tailstock taper: Morse Taper 4 (MT4) >> Feeds: from 0.026 to 0.888 mm/rev >> Thread types possible: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.35 to 12 mm >> Weight approx. 1,500 kg >> Switchable spindle brake >> Motor power: 2.0/4.0 kW >> Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: >> 3-axis digital readout by Heidenhain >> 200 mm three-jaw chuck, 2 sets of jaws >> Multifix size B quick-change toolpost with 3 toolholders >> Drill chuck, centre >> Bed stop >> Machine mounts Ljdpfeylh Ncjx Alcjrt About the Machine: For sale is a Weiler Commodor lathe in excellent, fully functional condition. The machine comes from a government facility where it saw only limited use. The Commodor is one of the largest manual lathes manufactured by Weiler. It is an extremely robust and powerful machine. The Heidenhain 3-axis digital display makes operation even easier and more precise. The machine has been thoroughly electrically and mechanically inspected by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our premises.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler engine lathe model Condor 81, leadscrew and feed shaft lathe with 3-axis Heidenhain digital readout Technical data: >> Year of manufacture: 1988, Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock taper: MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight approx. 1,100 kg >> Spindle brake selectable >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and features: >> 3-Axis Heidenhain digital readout >> 1 pc. three-jaw chuck (new) with 2 sets of jaws >> Collet chuck, collets from 3 to 30 mm (40 pcs, some duplicates) >> Multifixed size B with 3 tool holders >> Bed stop >> Machine feet >> Drill chuck >> Live center Safety features: Ljdexu Hlaspfx Alcsrt >> Leadscrew and feed shaft cover >> 2 emergency stop buttons >> Spindle brake About the machine: A used Weiler Condor 81 lathe, year of construction 1988, in very good condition is being offered. The machine is, of course, fully functional. For safety, the leadscrew and feed shaft are equipped with a protective cover. This is a very robust and high-performance machine. The 3-axis Heidenhain digital readout makes operation easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was carried out. This newer generation of Weiler lathes is extremely user-friendly. Take the opportunity to inspect and test this machine under power at our location.

Stav: veľmi dobrý (použitý), Rok výroby: 1989, Funkcionalita: plne funkčný, Weiler Praktikant 140 B Lead and Feed Screw Lathe in Toolroom Accuracy with 3-Axis Digital Readout from K&C - NEW!!! Technical Data: >> Year of manufacture: 1989 Machine No. 89-140-1471 >> Centre height: 140 mm >> Centre distance: 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore: 40 mm >> Short-taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake, switchable >> Dimensions (L x H x W): 1.6 m x 1.25 m x 0.7 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, with 12 months manufacturer's warranty and operating manual. Functions: mm/inch conversion, ABS/INC coordinate selection, value halving, reference marker, tool programming for 200 tools, taper calculation, radius/diameter, rapid zeroing, counting direction switching. >> NEW collet chuck set with collets from 3 to 25 mm, 1 mm increments, NEW >> 160 mm 3-jaw chuck with one set of jaws >> Multifix size A with 2 tool holders Lrodpfxsymdyme Alcet >> Faceplate >> Bed stop >> Rear panel >> Machine feet >> Electronic spindle guard >> Operating manual For safety: Electronic spindle guard, leadscrew and feedscrew cover, 2 emergency-stop buttons, spindle brake, electronic change gear door interlock About the machine: Offered is a Weiler Praktikant 140 B lead and feed screw lathe in very good condition. This is a very nice lathe from a training workshop. All slides move smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows for the production of grinded-like surface finishes. Take the opportunity to view the machine on site under power and see the condition for yourself.

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Weiler Commodor Lead and Feed Shaft Lathe with 3-axis K&C Digital Readout, COMPLETELY OVERHAULED with Inspection Protocol according to New Machine Tolerances Technical Data: >> Machine No. 2020 >> Centre Height: 180 mm Lrsdpovrckqjfx Alcjt >> Centre Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Morse Taper 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Threads possible: Metric, Inch, Module, and Diametral Pitch >> Metric Pitch Range: 0.35 to 12 mm >> Weight approx. 1,500 kg >> Spindle Brake Switchable >> Drive Power: 2.0 / 4.0 kW >> Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Features: >> 3-axis K&C digital readout, new, 12 months manufacturer's warranty with user manual. Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, 200 tool memory, taper calculation, radius/diameter switching, quick zeroing, counting direction switching >> 3-jaw wedge bar chuck in almost new condition, 200 mm, 1 set of jaws >> Multifix size B with 2 tool holders NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle safety guard >> Spindle brake >> 2 emergency stops On request: Lead and feed shaft covers About the Machine: Offered is a Weiler Commodor lead and feed shaft lathe in geometrically overhauled condition. The guides have been reground or hand-scraped as new. Acceptance according to test protocol. Resprayed in 2K high-gloss white. Multifix toolpost and chuck are new. For safety: The machine features a brake motor, electronic spindle safety guard, and two emergency stops — an absolutely as-new condition lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and surfaces with a ground finish can be produced. You are welcome to inspect the machine under power at our premises to verify its exceptional condition.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of Manufacture: approx. 1990, Machine No. 3150 >> Center Height: 120 mm >> Center Distance: 430 mm >> Spindle Speed: 60 - 3000 rpm, 18 geared steps >> Spindle Bore: 23 mm Lsdpfevivmysx Alcjrt >> Short Taper Spindle Nose DIN 4 >> Tailstock: Morse Taper No. 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 2.5 mm >> Engagable Spindle Brake >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: >> 1 piece 3-jaw chuck NEW 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> Brand new collet chuck system with collets from 3 to 26 mm in 1 mm increments About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and uniformly. The bed guides are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stav: použitý, Funkcionalita: plne funkčný, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Specifications: >> Year of manufacture: approx. 1970 Machine No. M1012 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 30 – 3,550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet locking >> Tailstock Morse taper 3 >> Feeds from 0.010 to 1.184 mm/rev Ljdsvv Etvspfx Alcort >> Threads: metric, imperial, module and diametral pitch possible >> Metric thread pitches from 0.25 to 15 mm >> Weight: approx. 700 kg >> Dimensions: length 1.4 m, height 1.2 m, depth 0.55 m Accessories and Equipment: >> Collet chuck system with 32 collets (set incomplete) and matching receiver >> 1 three-jaw chuck incl. set of jaws >> 1 four-jaw chuck incl. set of jaws >> Multifix quick-change toolpost, size A, with 2 tool holders >> Change gears >> Bed stop About the machine: For sale is a used Weiler Matador VS-2 in fully functional condition. You are welcome to inspect the machine under power at our site and convince yourself of its condition.

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C NEWLY Refurbished with Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No. 1824 >> Centre height: 180 mm >> Centre distance: 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55029 size 5 >> Tailstock Morse taper 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Supported thread types: metric, inch, module and diametral pitch threads >> Metric thread pitches: from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake, switchable >> Motor power: 2.0/4.0 kW >> Dimensions (LxHxW): 2.2 m x 1.5 m x 1 m Accessories and Equipment: >> 3-axis K&C digital readout, new, 12 months manufacturer warranty with operating manual Functions: mm/inch switching, ABS/INC coordinate selection, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, counting direction switching >> 200 mm three-jaw wedge bar chuck, as new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection Lrsdevrcqdepfx Alcet >> Spindle brake >> 2 emergency stops Optional: Covers for lead and feed screw About the Machine: Offered here is a Weiler Commodor lead and feed screw lathe in a geometrically overhauled condition. The guides are newly ground or scraped. Acceptance according to test protocol. 2K white gloss paintwork. The Multifix tool post and chuck are new. Safety: The lathe features a brake motor, electronic spindle protection, and two emergency stops—an absolutely as-new lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and surface finishes comparable to grinding can be achieved. Take the opportunity to inspect this machine under power on-site and see the condition for yourself.

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Weiler centre lathe model Condor 81, leadscrew and feedscrew lathe with 3-axis digital readout from K&C, NEW. Geometrically overhauled with inspection certificate for new machine tolerances. Technical data: >> Machine no. 84-121 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds from 0.015 to 0.46 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch possible >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1,100 kg >> Spindle brake can be engaged >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and features: >> 3-axis digital readout by K&C, new, 12 months manufacturer's warranty with manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switching >> Collet chuck system NEW, collets NEW from 3 to 26 mm, 1 mm increments Lrjdpfx Alewrm Dtscet >> 160 mm 3-jaw chuck with 2 sets of jaws, NEW >> Multifix size B, NEW, with 3 toolholders >> Bed stop >> Electrical chuck guard, NEW >> Rear splash guard >> Operators manual >> Coolant system >> Machine feet About the machine: For sale is a Weiler Condor 81 leadscrew and feedscrew lathe in very good geometrically overhauled condition. The guideways have been newly ground or hand scraped. Supplied with acceptance inspection according to test protocol. Accessories such as collets and chucks are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops, making it an as-new lathe. The Weiler runs very smoothly, even at high spindle speeds. This newer generation of Weiler lathes is very user-friendly and can produce surfaces comparable to ground finishes. You are welcome to view and test the machine under power at our premises to convince yourself of its condition.

Stav: veľmi dobrý (použitý), Rok výroby: 1986, Funkcionalita: plne funkčný, Weiler Praktikant 160 B Leit- und Zugspindeldrehmaschine mit 3-Achs Digitalanzeige K&C NEU Technické údaje: >> Rok výroby: 1986, výrobné číslo: 86-160-348 >> Výška hrotu: 160 mm >> Vzdialenosť medzi hrotmi: 650 mm >> Počet rýchlostí vretena: 8, v rozmedzí od 96 do 2500 ot./min >> Priechod vretena: 40 mm >> Krátkokužeľová hlava vretena podľa DIN 55027, veľkosť 5 s bajonetovým uzáverom >> Koník: MK 3 >> Posuvy: od 0,02 do 0,63 mm/ot >> Možné závity: metrické, palcové, modulárne a diametral-pitch >> Metrické stúpanie závitov: 0,25 až 8 mm >> Hmotnosť cca 680 kg Lrsdpfjwthbiex Alcet >> Vretenová brzda pripojiteľná >> Rozmery: dĺžka 1,6 m, výška 1,25 m, hĺbka 0,7 m Príslušenstvo a výbava: >> 3-osá digitálna indikácia K&C Nová, 12-mesačná záruka výrobcu s návodom na obsluhu Funkcie: prepínanie mm/palec, voľba súradníc ABS/INC, delenie zobrazenej hodnoty na polovicu, referenčná značka, programovanie nástrojov (200 pozícií), výpočet kužeľa, polomer/priemer, rýchle vynulovanie, prepínanie smeru počítania, >> Upínacie klieštiny, takmer nové, od 1 do 29 mm v krokoch po 1 mm >> Nové 3-čeľusťové skľučovadlo 160 mm s dvoma sadami čeľustí >> Mulifix veľkosť A s 3 držiakmi nástrojov >> Elektrický kryt skľučovadla >> Pozdĺžny doraz lôžka >> Zadná stena >> Nôžky stroja >> Chladiace zariadenie O stroji: Na predaj je sústruh s vedenou a ťahanou skrutkou Weiler Praktikant 160 B v presnosti vhodnej pre nástrojárov, vo veľmi dobrom stave. Stroj je plne funkčný. Stroja bol kompletne demontovaný a nanovo nalakovaný v svetlosivej farbe. Sanie sa pohybujú veľmi ľahko a rovnomerne. Aj pri vysokých otáčkach beží sústruh Weiler ticho. Táto novšia generácia sústruhov Weiler je veľmi užívateľsky prívetivá a umožňuje dosiahnuť povrchy s kvalitou brúsenia. Využite možnosť vidieť tento stroj na mieste pod napätím a presvedčiť sa o jeho stave osobne.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Center height: 120 mm >> Center distance: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Camlock spindle nose KK4 DIN 55027 >> Tailstock quill: MT2 >> Feed rates from 0.03 to 0.15 mm/rev >> Threading capability: Metric, Inch, Module, and Diametral Pitch Ljdpfx Aeu Aftgelcert >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Equipment and Accessories: >> 1 pc. 160 mm 3-jaw chuck with 1 set of jaws >> 1 pc. New 125 mm 3-jaw chuck with 2 sets of jaws >> Collet chuck system with collets from 1 mm to 20 mm, in 1 mm increments >> Multifix size A toolpost with 3 tool holders >> Stop >> Change gears About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully operational. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was previously located in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce surfaces comparable to grinding. Take the opportunity to inspect this machine under power on site and see for yourself its condition.