Zariadenia Na Zváranie Stolov kúpiť použité (97 911)

Stav: nový, Počet: 27 pozícií Hmotnosť: 52 kg Stav: nový Priemer otvoru: 28 mm Fsdpfx Aogp Dyueb Ssgc P-Set 1: 27 kusov, systém 28 mm (pre hrúbku stola 15 mm), pozostáva z: Zvierky: 5 ks 100/350 mm Doraz: 2 ks 500 mm Doraz: 2 ks 150 mm Uholníky: 2 ks 175 x 175 mm Ploché uholníky: 2 ks 350 x 250 mm Ploché uholníky: 2 ks 275 x 150 mm Excentrické podložky: 2 ks 100 mm Rýchloupínacie skrutky: 10 ks Počet: 33 pozícií Hmotnosť: 52 kg Stav: nový Priemer otvoru: 28 mm

Stav: nový, Upínací rozsah skľučovadla 10 – 200 mm Výška 67,5 mm Priechod 65 mm Vonkajší priemer skľučovadla 200 mm Vonkajší priemer upínacej páky 360 mm Hmotnosť 4 kg Fjdpjfv Awlefx Ab Segc Charakteristiky: • Samocentrovacie. • Otočné čeľuste. • Pevné upínacie páky umožňujú rýchlu výmenu obrobkov. • Nízka hmotnosť a ploché vyhotovenie minimálne menia ťažisko. Rýchloupínacie skľučovadlo typu D-D umožňuje rýchlu výmenu produktov a je ideálne pri častej výmene dielov. Nie je potrebný žiadny voľný rýchloupínací kľúč, pretože páky sú integrované do rýchloupínacieho skľučovadla.

Stav: nový, Clamping range of the chuck: 120 - 380 mm Height: 95 mm Bore: 170 mm Outer diameter of chuck: 400 mm Outer diameter of clamping levers: 600 mm Weight: 26 kg Features: • Self-centering. • Reversible jaws. Fgsdpfx Abjfv Awts Ssc • Fixed clamping levers allow for quick workpiece changes. • Lightweight and flat design minimally affects the center of gravity. The D-D quick-change chuck enables fast workpiece changes and is particularly suitable for frequent component swaps. There is no need for a separate quick-release key, as the levers are integrated into the quick-change chuck.

Stav: nový, Clamping range of chuck: 200 - 500 mm Height: 110 mm Passage: 240 mm Outer diameter of chuck: 320 mm Outer diameter of clamping lever: 700 mm Weight: 56 kg Features: • Self-centering. • Reversible jaws. • Fixed clamping levers enable rapid workpiece changes. Fsdpsfv Awwsfx Ab Segc • Lightweight and low-profile design minimizes impact on center of gravity. The D-D quick-change chuck allows for rapid product changes and is especially suitable for frequent component swapping. No separate quick-change wrench is required, as the levers are integrated into the quick-change chuck.

Stav: nový, Upínací rozsah sklíčidla: 80 – 280 mm Výška: 67,5 mm Průchozí otvor: 100 mm Vnější průměr sklíčidla: 300 mm Vnější průměr upínací páky: 480 mm Hmotnost: 13 kg Fgjdpfx Abjfv Awpo Sjc Charakteristika: • Samostředicí. • Obracecí čelisti. • Pevné upínací páky umožňují rychlou výměnu obrobků. • Nízká hmotnost a ploché provedení jen minimálně mění těžiště. Rychloupínací sklíčidlo typu D-D umožňuje rychlou výměnu produktů a je ideální při časté výměně dílů. Nepotřebujete žádný samostatný rychloupínací klíč, protože páky jsou integrovány přímo do sklíčidla.

Stav: nový, Počet: 33 pozícií Hmotnosť: 52 kg Stav: nový Priemer otvoru: 28 mm Fjdpfx Abofh N Ekj Ssgc Sada 1: 33-dielna, systém 28 mm, pozostáva z: Sverky: 4 x 280610.N Sverky: 2 x 280630.N Prizma: 2 x 280648.1.N Čap: 12 x 160511 Doraz: 4 x 280410.N Doraz: 4 x 280420.N Uholník: 2 x 160110.N Uholník: 2 x 280152.N Príslušenstvo – súprava: 1 x 283999 Cena nezahŕňa balenie a dopravu.

Stav: nový, Počet pozícií: 37 Priemer otvoru: 28 mm Stav: nový Hmotnosť: 29 kg Fgodpfogazl Rsx Ab Ssc Basic-Set 1, 37-dielny, systém 28 mm, pozostáva z: Prítlačné zvierky: 4x 280604 Kolíky: 8x 280511 Dorazy: 6x 280420.N Uholníky: 2x 280110.G Závitové čapy: 8x 280543 Dorazy: 8x 160415 Príslušenstvo: 1x 163999 Cena bez obalov a dopravy.

Stav: nový, Počet: 55 pozícií Priemer otvoru: 16 mm Stav: nový Hmotnosť: 23 kg Sada 2, 55-dielna, systém 16 mm, pozostáva z: Fjdpfx Absgarhys Sogc Svorky: 6 x 160610 Svorky: 2 x 160630 Prizma: 4 x 160645.1.N Kolíky: 18 x 160511 Doraz: 4 x 160410.N Doraz: 6 x 160420.N Uholník: 6 x 160108.N Uholník: 6 x 160110.N Uholník: 2 x 160162.N Príslušenstvo – sada: 1 x 163999 Cena nezahŕňa balenie a dopravu.

Stav: nový, Number of items: 57 Weight: 98 kg Condition: new Hole diameter: 28 mm Set 2: 57-piece, 28 mm system, consisting of: Clamps: 6 x 280610.N Clamps: 4 x 280630.N Prism: 4 x 280648.1.N Pins: 18 x 160511 Fgsdpefh Uw Rofx Ab Soc Magnetic Pins: 4 x 280740 Stop: 6 x 280410.N Stop: 6 x 280420.N Angle bracket: 4 x 160110.N Angle bracket: 2 x 280152.N Angle bracket: 2 x 280162.N Accessory set: 1 x 283999 Price quoted excl. packaging and transport.

Stav: nový, Number of items: 57 positions Hole diameter: 22 mm Condition: new Weight: 66 kg Set 2, 57-piece, 22 mm system, consisting of: Clamps: 6 x 220610.1 Clamps: 4 x 220630.1 Prism: 4 x 220645.1 Pins: 18 x 220511 Magnetic pins: 4 x 220740 Stop: 6 x 220410.N Stop: 6 x 220420.N Stop: 2 x 220426.N Angle bracket: 4 x 220110.N Angle bracket: 2 x 220152.N Accessory set: 1 x 223999 Fgedpfogazmrex Ab Ssc Price indicated plus packaging and transport costs.

Stav: nový, Number of items: 29 Hole diameter: 16 mm Condition: new Weight: 11 kg Set 1: 29-piece, 16 mm system, consisting of: Clamps: 4 x 160610 Fsdpfxjgarhve Ab Sjgc Pins: 12 x 160511 Stop: 4 x 160420.N Angle bracket: 4 x 160108.N Angle bracket: 4 x 160110.N Accessory set: 1 x 163999 Price stated is exclusive of packaging and transport.

Stav: nový, Počet: 96 pozícií Hmotnosť: 600 kg Stav: nový Priemer otvoru: 28 mm Špeciálna sada, 96-dielna, systém 28 mm, pozostáva z: 1x vozík na náradie 30x rýchloupínací čap s otočným zámkom, krátky, bez O-krúžkov 8x univerzálny doraz 150 L – nitridovaný 4x univerzálny doraz 225 L – nitridovaný 8x dorazový a upínací uholník 175 L – liatina 2x dorazový a upínací uholník 500 G vľavo – nitridovaný 1x dorazový a upínací uholník 750 G vľavo – nitridovaný 1x dorazový a upínací uholník 750 G vpravo – nitridovaný 1x dorazový a upínací uholník 500 G vľavo – nitridovaný 1x dorazový a upínací uholník 500 G vpravo – nitridovaný 4x dorazový a upínací uholník 300 G vľavo – nitridovaný 8x prizma Ø60–135° brunírovaná – s prírubou, kompletne so skrutkovou prírubou a zápustnou hlavou Fgjdpfxjd Rmbne Ab Sjc 16x profesionálna skrutková svorka – nitridovaná 6x profesionálna skrutková svorka 45°/90° – nitridovaná 4x univerzálny doraz 300 – nitridovaný 1x príslušenstvo, pozostávajúce z: excentr, imbusový kľúč, kefa, brúsny kameň, vzorka CleanBasic, vzorka Antihaft a držiak horáka. UPOZORNENIE!!! Náradie je určené pre hrúbku stolovej dosky 25 mm.

Rok výroby: 2010, stav: veľmi dobrý (použitý), Technické údaje: - Na predaj plne automatická linka na zváranie pletiva PITTINI / EVG - Šírka pletiva – max. 2400 mm - Dĺžka pletiva – max. 8000 mm Fedpofwm D Tefx Ab Ssgc - Priemer pozdĺžneho drôtu – max. 10 mm - Priemer priečneho drôtu – max. 10 mm - Maximálny počet pozdĺžnych drôtov – 24 - Pozdĺžne a priečne drôty zo zásobníkov - Jednotka podávania priečnych drôtov – EVG - Rýchlosť – max. 110 taktov/min. - Inštalovaný výkon – 1,5 MW - Automatická jednotka na balenie pletiva

Stav: veľmi dobrý (použitý), Rok výroby: 2008, Funkcionalita: plne funkčný, Kompletná inštalácia chladiaceho systému na báze amoniaku: Typ: Piestový chladiaci systém Kolbenverdichterkalteanlage V1 412 E a VF 612 E Rok výroby: 2008 Chladiaci výkon: 760 kW Chladivo: amoniak NH3/ R717 Povolené prevádzkové tlaky: nízkotlaková strana -1/12 bar, vysokotlaková strana -1/17 bar Chladiaca inštalácia pozostáva z: 2 piestových chladiacich kompresorov GEA Grasso, typ: (1x) Grasso 612E package, (1x) Grasso 412E package, tlaková nádoba EM Polar, typ: DM1600; výparníkový kondenzátor Kühlturm GmbH, typ: KIV 2/12-28-12, 2; rozvádzače a riadiaca skriňa, 3 palety s ventilmi, doplnkové náhradné diely - Grasso 612E package: Fjdpfxexg Ruij Ab Ssgc 1 kus piestový kompresor Grasso/GEA typ 612E Elektromotor Leroy Somer 200 kW /1468 ot./min Rozmery: 3200 mm x 1900 mm x 2150 mm Chladiaci výkon 418,5 kW pri -10ºC/+40ºC Rok výroby: 2008 - Grasso 412E package: 1 kus piestový kompresor Grasso/GEA typ 412E Elektromotor Leroy Somer 132 kW /1468 ot./min Rozmery: 3200 mm x 1900 mm x 2150 mm Chladiaci výkon 325 kW pri -10ºC/+40ºC Rok výroby: 2008 - Tlaková nádoba EM Polar: 1 kus tlaková nádoba EM Polar, typ: DM1600 kapacita: 9580 litrov rozmery: 5200 mm x 1650 mm x 1900 mm Hmotnosť prázdnej nádoby: 2400 kg Rok výroby: 2008 - Výparníkový kondenzátor Kühlturm GmbH: 1 kus výparníkový kondenzátor Kühlturm GmbH, typ: KIV 2/12-28-12, 2 rozmery (2 časti): 6900 mm x 2500 mm x 2500 mm a 3200 mm x 2500 mm x 2150 mm Chladiaci výkon: 1098 kW Rok výroby: 2008 Ďalšie informácie na požiadanie.

Stav: nový, Max. tool diameter 400 mm Max. tool height 180 mm Operating pressure 2 bar ROTATHERM chamber cleaning systems are used in all areas of industry and trade for cost-effective cleaning of a wide variety of items and materials. The parts are cleaned in a process similar to that of a dishwasher. Placed in a wire mesh basket, they are washed from all sides inside the sealed unit using a hot detergent spray. The machine is started after preselecting the desired temperature and washing time. A centrifugal pump circulates the cleaning fluid to the nozzle system, which simultaneously rotates the basket. (Optional: electric motor basket drive) After the cleaning cycle is complete, the machine shuts off automatically. The parts can also be removed earlier; in this case, lifting the lid will automatically switch off the pump. ROTATHERM chamber cleaning systems are available at short notice in various sizes and models, and can be modified on request for specific requirements. Typically, water-based cleaning agents are used, but solvents can also be used in our cleaning machines. Explosion-proof versions are available if required. Technical details EMSA ROTATHERM Mini: ----- Basket diameter: 400 mm Usable height: 180 mm Load capacity: 50 kg Spray pressure without / with filter: 1.5 / 2.3 bar Circulation volume: 2.5 m³/h Tank capacity: 35 l Heating power: 2 kW Connected load: 2.5 kW Voltage: 220/230 V Frequency: 50 Hz Fedpsyrtytsfx Ab Sjgc Dimensions ----- Depth: 530 mm Width: 650 mm Height: 630 mm Weight: 48 kg ----- Base unit price in the above configuration: On request ----- Accessories: ----- Order-no: 1.521 Lid extension / max. tool length 310 mm Order-no: 1.522 Tool holder HSK 63 F for exchange with basket Order-no: 1.523 Tool holder HSK 63 E for exchange with basket Order-no: 1.524 Tool holder for Weinig Powermat for exchange with basket Order-no: 2.006 Small parts basket Order-no: 1.504 Filtering unit (0.08m²) Order-no: 1.510 Pressure gauge Order-no: 1.511 Electric motor-driven basket drive Order-no: 1.512 Mobile chassis Order-no: 1.513 Rollers Order-no: 1.514 Extraction unit Order-no: 1.516 Oil separator / belt skimmer Order-no: 1.518 Complete unit in stainless steel Order-no: 1.519 Nozzles in stainless steel ----- Prices: On request The ROTATHERM tool cleaning machine is also available in larger designs: Standard, Maxi, and XL. All units are available in special voltages. Surcharge on request. When ordering accessories, the technical specifications and possibly the delivery time may change! The stated values are reference values. Subject to technical changes. Delivery: Short lead times and by arrangement. All prices ex works plus packaging, shipping, insurance, and statutory VAT. (Technical data according to the manufacturer - subject to change without notice!)

Stav: použitý, Prosím, uveďte svoju ponukovú cenu. Cena bez obalov a dopravy; platba vopred. Ak máte o stroj záujem, je potrebné nám zaslať cenovú ponuku. Odovzdanie stroja prebehne v našich priestoroch. Dodacie podmienky: EXW Cugir, Rumunsko. Fsdpfeza Uc Sjx Ab Segc Kupujúci sa môže zúčastniť demontáže stroja. Za dopravu stroja zodpovedá kupujúci. Z našej strany zabezpečujeme len naloženie stroja na príves/nákladné vozidlo pomocou vysokozdvižného vozíka alebo žeriava.

Rok výroby: 2011, stav: použitý, 1 ks zariadenie na servis klimatizácie ROBINAR AC690PRO Sériové číslo: P11196010 Farba: podľa obrázkov a obhliadky Rok výroby: 2011 Stav: použitý Miesto uskladnenia: Hala 1 Spôsob platby: platba vopred prevodom Doprava: Iba osobný odber na mieste Hofgeismar Fgjdpfx Aozcmgzob Soc

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well. Fjdpfx Aofz Dubeb Segc

Rok výroby: 2020, stav: nový, 7-inch touch panel The large color touch panel makes parameter input even easier and more convenient. 5 programs with 50 steps each It is possible to program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Information about gas and oil consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate the consumption and cost of each firing process. USB storage Every firing process is logged, and the data can be transferred to a USB stick for analysis on a PC. Each file is automatically created for a single firing process, recording extreme temperatures and exact timing. Files are saved in *.csv (Excel spreadsheet) format. For all customers until the end of 2016, this feature is free of charge. At other companies, this can cost several thousand euros. Storage of the last 20 firing processes Is something wrong? Did too few items come out of the kiln? Now you can check the exact parameters of the firing process, such as duration or potential issues. New! Timer It is possible to set the start time, allowing the kiln to turn on automatically before the workday begins. Fgsdpfx Asfz Apqeb Sec Made by professionals for professionals Automatic smoke extraction The smoke extraction system can be programmed to open a few minutes before the end of the firing process to vent smoke from the chamber. The smoke extractor can also be controlled via the touch panel. Process duration timer Using the heating dynamics, the process duration is calculated and the end time of the firing process is displayed. Self-closing doors To open, simply pull the door. To close, just push—it will close automatically. Exhaust hood above the door (optional) To minimize hall heating caused by opening the door, an exhaust hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for customers purchasing a large kiln who wish to use only part of the kiln. The oven is equipped with a movable partition wall and dedicated control system. 2 in 1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors Fgodpfxofz Dt No Ab Sjc The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Fgodpfsfz I D Djx Ab Ssc Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors Fgedjfz I Edepfx Ab Soc The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. Fsdpeflmdwjfx Ab Ssgc - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, 7-inch touch panel The large color touch panel makes parameter input even easier and more convenient. 5 programs with 50 steps each It is possible to program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Information about gas and oil consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate the consumption and cost of each firing process. USB storage Every firing process is logged, and the data can be transferred to a USB stick for analysis on a PC. Each file is automatically created for a single firing process, recording extreme temperatures and exact timing. Files are saved in *.csv (Excel spreadsheet) format. For all customers until the end of 2016, this feature is free of charge. At other companies, this can cost several thousand euros. Storage of the last 20 firing processes Is something wrong? Did too few items come out of the kiln? Now you can check the exact parameters of the firing process, such as duration or potential issues. New! Timer It is possible to set the start time, allowing the kiln to turn on automatically before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction system can be programmed to open a few minutes before the end of the firing process to vent smoke from the chamber. The smoke extractor can also be controlled via the touch panel. Process duration timer Using the heating dynamics, the process duration is calculated and the end time of the firing process is displayed. Self-closing doors To open, simply pull the door. To close, just push—it will close automatically. Exhaust hood above the door (optional) To minimize hall heating caused by opening the door, an exhaust hood can be installed above the door to remove hot air. Fgsdpfjfzkrnjx Ab Ssc Partition wall (optional) The partition wall is suitable for customers purchasing a large kiln who wish to use only part of the kiln. The oven is equipped with a movable partition wall and dedicated control system. 2 in 1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Rok výroby: 2020, stav: nový, 7-inch touch panel The large color touch panel makes parameter input even easier and more convenient. 5 programs with 50 steps each It is possible to program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Information about gas and oil consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate the consumption and cost of each firing process. USB storage Every firing process is logged, and the data can be transferred to a USB stick for analysis on a PC. Each file is automatically created for a single firing process, recording extreme temperatures and exact timing. Files are saved in *.csv (Excel spreadsheet) format. For all customers until the end of 2016, this feature is free of charge. At other companies, this can cost several thousand euros. Storage of the last 20 firing processes Is something wrong? Did too few items come out of the kiln? Now you can check the exact parameters of the firing process, such as duration or potential issues. New! Timer It is possible to set the start time, allowing the kiln to turn on automatically before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction system can be programmed to open a few minutes before the end of the firing process to vent smoke from the chamber. The smoke extractor can also be controlled via the touch panel. Process duration timer Using the heating dynamics, the process duration is calculated and the end time of the firing process is displayed. Self-closing doors Fsdpefz U Tiefx Ab Ssgc To open, simply pull the door. To close, just push—it will close automatically. Exhaust hood above the door (optional) To minimize hall heating caused by opening the door, an exhaust hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for customers purchasing a large kiln who wish to use only part of the kiln. The oven is equipped with a movable partition wall and dedicated control system. 2 in 1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.