Objemová ťažná jednotka

MERCEDES-BENZ ACTROS 1846 , Low Deck

Stav: nový, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 535 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 2 650 mm, objem nakladacieho priestoru: 93 m³, Chassis Design with continuous, reinforced chassis, newly constructed superstructure in self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength. Crossmembers, 140 mm high, reinforced version (for high floor loads). Additional reinforcement as gusset plate in the front lower chord/vehicle frame area. Chassis made of galvanized steel up to the support structure (semitrailer construction max. 39,000 kg). Axles and Suspension "Disc Brake 22.5" Jost (DCA) axle assemblies, 3 x 9 tonnes with DCA air suspension, raise and lower function, Wabco Smartboard Info Center, electronic brake pad wear indicator readable in the tractor unit (display), first axle with starting aid (per new EC regulations, without tractor unit equipment), (optionally, the first and third axles can be lifted). Gsdpegcw Rmjfx Af Esbi Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 by manufacturer choice (Br-Go-Co) on 11.75x22.5 ET 120 silver steel rims. Landing Legs Mechanical landing gear with two speeds, 2 x 20 t support load with swing foot. Brake System According to E.G. standard: EBS electronic system - Wabco with RSS (Roll Stability Support) and premium modulator. Spring-actuated parking brake on two axles, operated from the rear, aluminum air reservoir installation. Electrical System According to EC standards 91/633 and 97/28, with 2 five-chamber Aspöck Europoint 3 taillights integrated in the aluminum rear end, 24-volt system with 1 x 15-pin and 2 x 7-pin sockets, LED side marker lamps, 2 reflective rear panels, front position lamps 2 x white, rear 2 x red, 2 separate LED reversing lights integrated in the underrun protection. Body / Tipping Body "Body fully welded inside" Reinforced sidewalls: front wall load 17,250 dkn, side and rear walls 13,400/10,400 dkn. Aluminum tipping body, sidewalls made of 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with top and bottom chords. Plank profiles fully welded inside. Floor designed as a moving floor system on 140 mm ALU crossmembers, with forklift load approx. 9 t/m²; crossmembers closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3 mm thick, straight design. Special ALU corner profiles in beveled design. Smooth rear wall in straight design with 2 ALU swing doors, 50/30 mm thick, with 2 locking rods in welded ALU rear frame with Teflon and stainless steel bearings, doors secured when open by chain on each side. Hard wear plates on the sidewalls approx. 2,000 x 1,500 x 4 mm, fully welded. Moving bulkhead with Kevlar tarp approx. 1,800 mm length plus side Kevlar tarp sealing. Service door in front wall with inward folding ladder. Hydraulics "Cargo Floor" Moving Floor System Moving floor system in the bottom with hydraulically moved ALU profiles on ALU box sections with approx. 880 PE-HD sliding pads plus anti-lifting slide bearings. Type CF 10 mm floor version, hydraulics with approx. 200 mm stroke, fixed halves on the front wall, separate connection under the vehicle for hydraulic line with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190 – max. 240 bar, ALU end pieces welded in the moving floor. Electric control at rear left with radio control integrated in a lockable, waterproof box, no hydraulic hoses included. Accessories 6 PVC mudguards with 2 anti-spray mudflaps, 6 PVC splash plates above the wheels, ALU spare wheel holder, side ALU underrun protection.

Stav: nový, konfigurácia náprav: 3 nápravy, dĺžka ložného priestoru: 13 500 mm, šírka ložného priestoru: 2 480 mm, výška ložného priestoru: 2 500 mm, objem nakladacieho priestoru: 87 m³, Chassis Manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower chord for particularly high stability and strength. Auxiliary chassis made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle units 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle separately liftable with starting aid (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tires and Wheels 6 wheels with tires size 385/65 R 22.5 as per manufacturer selection on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel bolts + approx. 120 kg) Landing Legs Aluminum drop-leg supports, manuf. Alu-Leg, 2 x 10 ton support load, for air suspension we use swivel feet. Brake System According to E.E.C. standards, two-line braking system, EBS E-unit Wabco with RSS (Roll Stability Support), spring-loaded brake system acting on two axles operated at the rear, aluminum air reservoir system, premium modulator. Gsdpfx Afsgcw Rio Esbi Electrical System According to StVZO guidelines with 2 five-chamber tail lights type Aspöck Europoint III integrated into the aluminum end section, 24 volt system with 1x 15 pin and 2x 7 pin sockets, with LED outline marker lights on the sides, 2 work lights at the rear, 2 side-mounted LED work lights at the height of the landing legs, 1 LED work light inside at the front left operable from outside. Body/Tipper Body (Fully Welded Interior) Front wall load 17,250 dN? Rear and side walls 10,250/13,400 dN Aluminum tipper body, side walls 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide fully welded with lower and upper chord, plank profiles fully welded inside, floor as moving floor system on 140 mm aluminum cross members, forklift floor load approx. 7 t/m2, cross members mounted closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick, straight version, special ALU corner profiles beveled, smooth rear wall straight with two ALU swing doors 50/30 mm thick with 4 lock rods in welded ALU rear frame, bearings in Teflon and stainless steel, ALU side wall running in reinforced ALU upper chord with "Kevlar tarpaulin" for complete emptying, side brush sealing and additional Kevlar side tarpaulin, integrated discharge funnel with foldable cover plate in rear left corner operable from outside, viewing window rear left, each rear door with a sampling slide (total 2), service door left side front wall. Hydraulic System "Cargo Floor" 24 board system, smooth finish Moving floor system in the base with hydraulically operated aluminum profiles on ALU square profiles with approx. 880 PE-HD gliders, approx. 8 mm floor thickness, hydraulic stroke approx. 200 mm, fixed ends at front wall, separate connection for hydraulic line under vehicle with fixed couplings, line size NW 21, fixed couplings with size and design to be specified, operating pressure 190-240 bar max., aluminum end pieces welded into floor, input rear left, cable control in lockable waterproof box, without hydraulic hoses. Accessories PVC mudguards with rubber mud flaps, ALU spare wheel holder, side ALU underrun protection in foldable design, 1 plastic toolbox approx. 800x460x430 mm, approx. 3.7 m aluminum ladder, 680 g/m2 quality rolling tarpaulin with rolling tarpaulin system incl. side quick release.