Centrálny Mazací Systém kúpiť použité (25 157)

Rok výroby: 2014, Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, BVL Oberflächentechnik DAD 2BL (YUKON) Year of manufacture: 2014 For Clean Components in Continuous Operation Continuous stainless steel cleaning system with oil separator for in-line material flow. The items to be cleaned pass continuously—or, if required, in cycles—through successive treatment zones. Cleaning is achieved as components are conveyed past the fixed nozzle systems. Suitable for parts with dimensions of approx. 400 x 100 mm. A wire loop conveyor belt transports the components, either lying flat or standing, through the cleaning system. • Surrounding nozzle frame – the staggered nozzle arrangement enables cleaning on all sides • Separation of treatment zones minimizes cross-contamination • Adjustable nozzles and nozzle frames tailored to the respective component • Customization of working dimensions, load capacities, and pump performance possible The process steps occur in successive treatment zones: • Spray cleaning – sequential arrangement of various wet treatment zones (washing, degreasing, phosphating, rinsing, passivation) • Drying Tank volume: Dwsdoxcun Ejpfx Agnec Wash tank: 800 liters Rinse tank: 500 liters Heating capacity: Wash tank: 48.0 kW Rinse tank: 30.0 kW Pump rating: Wash tank pump: 3.0 kW Rinse tank pump: 2.2 kW Pump pressure: Washing: 3 bar Rinsing: 2 bar Drying: Fan: 2.2 kW Heater: 18 kW Operating temperature: min. 45°C to max. 60°C Each machine comes with stainless steel drip trays for leakage protection. These are included in the price and will be delivered with the machine. WE HAVE 2 IDENTICAL MACHINES AVAILABLE

Stav: veľmi dobrý (použitý), Teplota 80 / 130 °C Dedpsmmfg Njfx Agnjwc Nosnosť 100 kg Objem 750 l MARCELS MASCHINEN AG

Stav: veľmi dobrý (použitý), Najlepšie celkový odber Dwedpfx Aoxhg H Dognec

Stav: pripravené na použitie (použité), Rok výroby: 2009, K dispozícii je odsávacie a filtračné zariadenie Krämer na drevený prach pre pílové linky. 1) Odsávač drevného prachu Krämer VKA-P 100/650/55, objemový prietok: 27 000 m³/h, zvýšenie tlaku: 3 800 Pa, výkon motora: 55 kW, dĺžka klinového remeňa: 3 550 mm. 2) Filtračné zariadenie Krämer GFS Shake 160/25/250, filtračný výkon: 30 000 m³/h, filtračný materiál: polyesterová ihlová plst, výsyp materiálu: TFS40/10/1,1. 3) Ventilátor Krämer VFM-R 45/250/3, objemový prietok: 3 000 m³/h, zvýšenie tlaku: 2 500 Pa, výkon motora: 3 kW. 4) Ventilátor Krämer VFM-P 42/200/4, objemový prietok: 2 500 m³/h, zvýšenie tlaku: 3 000 Pa, výkon motora: 4 kW. 5) Oddelovacia nádoba/filtračný lievik Krämer. 6/7) 2x axiálne ventilátory. Vrátane potrubí a periférnych zariadení. Príruba na vykladacom motore je poškodená. Dokumentácia je k dispozícii. Možnosť obhliadky na mieste. Djdpfxexl Elgj Agnewc

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Merací systém elumatec MMS 200 - pravé prevedenie - dĺžka rezu 4500 mm Pre presné rezanie hliníkových profilov na dĺžku Pre montáž na všetky jednokotúčové píly (pravá strana) Zarážkový vozík možno odklopiť pre polohovanie profilov Patentovaný systém koľajnice a vozíka Optické odčítanie Dwjdpfx Agow Ivuljnjc

Stav: veľmi dobrý (použitý), Rok výroby: 2018, Funkcionalita: plne funkčný, číslo stroja/vozidla: Seriennummer: 30004287, • Typ zariadenia: Krüss K20 Force Tensiometer (na meranie povrchového a medzifázového napätia) • Použité zariadenie Dwsdpfjxgt Npex Agnjc • Rok výroby: 2018 • Sériové číslo: 30004287 • Otestované funkčnosťou • Príslušenstvo: o Ri21 štandardné meracie teleso pre Du Noüy krúžkovú metódu o PL21 štandardné meracie teleso pre Wilhelmyho platničkovú metódu o DE01 sada na určenie hustoty kvapalín

Rok výroby: 2023, Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, číslo stroja/vozidla: 2VHD12-3D Hygienic Dispenser, Hygienické dávkovacie čerpadlo na presné objemové dávkovanie nízkoviskóznych až vysokoviskóznych a kúskovitých médií. Povrch prichádzajúci do styku s produktom. Elastoméry s vyhlásením o zhode podľa FDA. Časti prichádzajúce do styku s produktom je možné sterilizovať v autokláve. Jednoduchá integrácia vďaka kompaktnej konštrukcii. Dwjdpfsxcgihox Agnsc

Stav: nový, Working length: 2451 mm Working width: 2170 mm Working height: 800–1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ----- Base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable support stands (approx. 800 mm – 1000 mm) - Conveyor system for timber lengths from 300 mm to 4200 mm - Conveyor system for timber widths up to 240 mm Roller conveyor – infeed - Continuously variable speed roller conveyor, approx. 5–25 m/min - Driven by geared motor 0.37 kW, line shaft, and PU round belt - Roller diameter: 50 mm, roller face length 240 mm with PVC cover - Transfer to transverse conveyor by lifting/lowering the roller track - Roller covers according to HBG Transverse conveyor - Transverse conveyor with 6 cross beams - PVC-coated conveyor belts (green), 50 mm wide, guided in plastic tracks - Continuously variable speed transverse conveyor, approx. 5–20 m/min - Driven by geared motor 0.37 kW - Approx. 1,750 mm from stop to stop Roller conveyor – outfeed - Continuously variable speed roller conveyor, approx. 5-25 m/min - Driven by geared motor 0.37 kW, line shaft, and PU round belt - Roller diameter: 50 mm, roller face length 240 mm with PVC cover - Transfer to transverse conveyor by lifting/lowering the roller track - Roller covers according to HBG ----- Conveyor belt approx. 320 mm x 3,500 mm Base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable support stands (approx. 800 mm – 1000 mm) - Conveyor belt for timber lengths from 300 mm to 4200 mm - Conveyor belt for timber widths up to 240 mm - Conveyor belt on castors with brake Belt - Continuously variable speed, approx. 5–25 m/min - Driven by geared motor 0.37 kW - Belt: PVC-coated, 260 mm wide - Adjustable stops on both sides, approx. 15 mm ----- Control: - Plug-and-play with dedicated control system and logic - Siemens PLC, 24 V DC - Siemens frequency inverter - Optical limit switches and emergency-stop loop - Fully wired with 16A Euro-plug - Connection: 400 V AC, 2 kW, 50 Hz ----- Pneumatics: 6–8 bar, approx. consumption 16 NL/min Colour: RAL 7035 light grey Complies with basic EU Directive 2006/42/EC in accordance with Dsdpfoi Hmpisx Agnewc 2006/95/EC Low Voltage Directive and 2004/108/EC EMC Directive ----- Price for the above configuration ex works: on request! plus packaging and transport costs ----- (Technical data as supplied by manufacturer, subject to change!)

Stav: nový, Rok výroby: 2025, Funkcionalita: plne funkčný, celková hmotnosť: 14 kg, celková šírka: 245 mm, celková dĺžka: 420 mm, celková výška: 450 mm, vstupné napätie: 230 V, objemový prietok: 420 m³/h, Výbava: podvozok, Odťah splodín s diaľkovým ovládaním a odsávacou hadicou Vzduchový vstup – príruba ρm Dodpfounh Nmex Agnowc Max. výkon 300 W Rýchlosť vzduchu 24 m/s Filtračná účinnosť 0,3 µm / 99,97 % Hluk 59 dB Dĺžka odsávacej hadice 1,5 m, vnútorný priemer 30 mm Systémový prietok cca 420 m³/h Rozmery D420 x Š245 x V450 mm Hmotnosť 14,0 kg Použitie: Tento výrobok je vhodný pre miesta, kde dochádza k znečisteniu ovzdušia, napr. dymom, zápachom, prachom, toxickými a škodlivými plynmi vznikajúcimi pri spájkovaní, laserovom popisovaní a gravírovaní, tlači atď. • Odsávacie zariadenie na použitie pri pracovisku • Samostatne vymeniteľný jemnozrnný predfilter M5 • Veľká filtračná plocha HEPA H13 s 2,4 m² pre optimálne filtrovanie častíc a dlhú životnosť filtra • Aktivované uhlie pre efektívne čistenie plynov • Prenosné odsávacie zariadenie pre flexibilné umiestnenie priamo pod alebo vedľa pracoviska • Jednoduchá výmena filtra • Variabilná regulácia výkonu vďaka percentuálnemu nastaveniu otáčok v 10 krokoch • Ochrana zdravia elektronickým monitorovaním filtra a filtrovým alarmom • Dlhá životnosť vďaka vysoko kvalitnému EC ventilátoru • Rýchla, jednoduchá a stabilná inštalácia vďaka systému Easy-Click

Stav: vyžaduje opravu (použité), Rok výroby: 2014, Funkcionalita: nefunkčný, celková hmotnosť: 1 500 kg, na rozobratie Stroj bez zotrvačníkového motora a frekvenčného meniča Dwodpfx Asxggc Negnec

Rok výroby: 1997, Stav: dobrý (použitý), Zariadenie na odstavenie kontajnerov, zdvíhacie zariadenie, oporné nohy, vretenová podpera, podopieracie zariadenie, systém zdvíhania kontajnerov -Výrobca: haacon, zariadenie na odstavenie kontajnerov, 1 sada/4 podpery -Poznámka: špeciálny držiak podľa fotografií, môže byť potrebné prispôsobiť Dwedpjigamqjfx Agnec -Nosnosť/sada: 14 000 daN -Nosnosť/podpera: 7 500 daN -Zdvih: cca 1 600 mm -Jednotlivé komponenty: viď foto / typové štítky -Obsah dodávky: kompletné podľa obrázkov -Prepravné rozmery: 2 155/1 050/H690 mm -Hmotnosť: 514 kg

Stav: použitý, The plant is suitable for the agglomeration of thermoplastic films and fibers. Throughput, depending on the material, ranges between 500 kg and 1,000 kg/h. The plant consists of: • Feed conveyor belt • Load-dependent control for the feed conveyor • Metal detector coil • HERBOLD cutting mill type SMS 45/100-H5-3 • Pneumatic material transport to storage silo • Plastcompactor unit HV-70, comprising supply silo feed screw, plastcompactor, central blower, and cooling circuit • HERBOLD secondary cutting mill type SML 45/100-S4-2 • Intensive cooling • Conveying blower SZS II 630/200 • Screening machine • Fines return to the compactor silo • Material conveyor type MFT with Big Bag station and automatic diverter to on-site silo • Automatic exhaust air filter Dwsdpfxjxgtqmo Agnjc • Electrical control system • Compressor.

Stav: pripravené na použitie (použité), Rok výroby: 2005, K dispozícii je kužeľová skúšobná prevodová kontrolná stolica Gleason. Priemer obrobku: 330 mm, max. vzdialenosť stredov: 203 mm, rozsah vzdialenosti nosu hnacieho vretena: 100 mm – 250 mm, max. posun hore/dole: 203 mm/50 mm, otvor hnacieho vretena: 99 mm, kužeľovitosť hnacieho vretena: 15,5 mm/m, otvor protivretena: 58 mm, kužeľovitosť protivretena: 12,7 mm/m, otáčky vretena: 1500 ot./min, rozsah meracieho uhla: 0°–180°, opakovateľná presnosť hnacieho vretena: +/-0,004 mm, hádzavosť: +/-0,003 mm, rozmery stroja X/Y: cca 1550 mm/2050 mm, hmotnosť: cca 2400 kg. Možná je osobná obhliadka. Dwodpfxjxltu Ns Agnec

Stav: použitý, Dĺžka 2700 mm Šírka 1100 mm Výška 850 +- 150 mm Výkon motora 0,37 kW Elektrický príkon 0,5 kW Stlačený vzduch 6 bar Horizontálna impregnačná linka 'Pro flow' na jednotlivé diely s oplachovacím okruhom. ----- Funkčné vlastnosti: Stroj na horizontálne preplachovanie jednotlivých dielov. Produkt je nanášaný systémom dýz. Prebytočný produkt je následne zmetený vzduchovými dýzami. Čerpadlo a vzduchové dýzy sú automaticky riadené a aktivujú sa len pri prechode obrobku, čím sa znižuje spotreba stlačeného vzduchu. Okruhový režim zabezpečuje minimálnu spotrebu produktu. ----- Konštrukčné vlastnosti: Konštrukcia Robustný oceľový rám natretý vysokopevnostnými, vodou riediteľnými produktmi. Telo stroja z hrubých, tepelne zvarených polypropylénových dosiek. 4 nezávislé komory pre vstup, aplikáciu, ofuk a výstup. Horizontálny posuv obrobkov Motorizované plastové valce s drážkami. Elektrický menič na reguláciu a zmenu rýchlosti posuvu. Prevodovka Stroj je vybavený exkluzívnym systémom, vďaka ktorému sú všetky prevody umiestnené mimo komory aplikácie a ľahko dostupné pre obsluhu, čo zaručuje dlhšiu životnosť a uľahčuje údržbu. Pohyblivé časti sú chránené krytmi a vhodnými tesneniami. Obehové čerpadlo Pneumatické dvojmembránové čerpadlo s ventilmi, tesneniami a membránami z nitrilového kaučuku, s plastovým (PVDF) telesom. Vzduchové dýzy V prvej komore je ofukovací systém na zabránenie úniku produktu. Druhé ofukovanie za aplikačnou komorou odstráni prebytočný produkt z obrobku. Elektrický rozvádzač Podľa CE, stupeň krytia IP55. Vrátane meniča na nastavenie posuvnej rýchlosti. Technické parametre Dĺžka mm 2700 Šírka mm 1100 Rýchlosť posuvu (min./max.) m/min 3-6 Výkon motora pohonnej skupiny kW 0,37 Inštalovaný elektrický príkon kW 0,5 Vzdialenosť medzi vstupnými a výstupnými valcami mm 2520 Pracovná výška (nastaviteľná) mm 850 +- 150 Min. dĺžka preplachovaných obrobkov mm 250 Max. šírka preplachovaných obrobkov mm 300 Max. výška preplachovaných obrobkov mm 250 Spotreba stlačeného vzduchu l/min 2000 Potreba tlaku vzduchu bar 6 Výbava a príslušenstvo: Dsdpjnl Nqqjfx Agnjwc Oplachovací okruh pre Pro Flow ----- Cena vyššie uvedeného stroja: na vyžiadanie! plus balenie a doprava ----- (Technické údaje podľa výrobcu – bez záruky! Obrázky sa môžu líšiť od originálu. Ceny bez DPH, platí pre SR.)

Stav: použitý, Grooving spindle, 2 pcs. Number of milling units: 7 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 12 Dwjdjvu Hdyspfx Agnec with radial and axial NC spindles, VARIO table, and trenching carriage ..... Machine professionally dismantled and stored at our warehouse in 73447 Oberkochen. Video and pictures were taken before dismantling. Technical Data Summary (For any additionally included accessories, please inquire) ..... Cross-cut saw ..... > Cross-cut saw, electronically and horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser alignment light for detection of the saw section > Axial adjustment travel: 150 mm, NC axis, electronically infinitely adjustable > Radial adjustment: pneumatic, 8 positions, e.g. for edge rounding from above Rounding unit ..... > Position: horizontal, below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment path mechanically coupled with cross-cut saw. > Radial adjustment: pneumatically actuated, On/Off electronic length stop ..... > Length: 4,500 mm 1st Tenoning and Grooving Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with supporting bearing > Axial adjustment travel: 580 mm, NC axis, stepless > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter-pressure system: complete clamping length is counter-supported 2nd Tenoning and Grooving Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with supporting bearing > Axial adjustment travel: 580 mm, NC axis, stepless > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter-pressure system: complete clamping length is counter-supported Transfer belt ..... For transfer of parts to the longitudinal processing, including double part separation before the entry to the longitudinal processing. 1st Profiling Spindle (climb and conventional milling) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with supporting bearing > Axial adjustment travel: 350 mm, NC axis, stepless > Radial adjustment travel: 80 mm, NC axis, stepless > Spindle speed: 6,000 rpm > Tool cutting circle min.: 140 mm > Tool cutting circle max.: 232 mm > 2 feed rollers opposite the spindle, axially pneumatically controlled, 8 positions > Table plate pneumatically controlled to tool diameter 2nd Profiling Spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with supporting bearing > Axial adjustment travel: 350 mm, NC axis, stepless > Radial adjustment travel: 80 mm, NC axis, stepless > Spindle speed: 6,000 rpm ...

Stav: použitý, Slotted spindle 2 pcs. Number of milling units: 7 pcs. Spindle diameter: 50 mm Control: CNC, Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial NC spindles as well as VARIO table ..... The machine has already been professionally disassembled and stored at 73447 Oberkochen Technical Data Overview (Please inquire about any additionally included accessories) ..... Cross-cut saw ..... > Cross-cut saw, electronic, horizontally and steplessly adjustable > Number of tools: 1 pc. > Spindle speed: 3,000–6,000 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser guide light for saw cut detection > Axial adjustment range: 150 mm NC axis, electronically stepless > Radial adjustment: pneumatic, 8 positions, e.g. for top edge rounding Rounding unit ..... > Position: horizontally below Dwsdpfewmgfyex Agnsc > Axial adjustment together with cross-cut saw Electronic length stop ..... > Length: 4,500 mm 1st tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800–4,000 rpm > Tool diameter: 380–400 mm > Follow-up counter, full clamping length is countered 2nd tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800–4,000 rpm > Tool diameter: 380–400 mm > Follow-up counter, full clamping length is countered Transfer belt ..... For transferring parts to longitudinal processing, including double part separation before the infeed to longitudinal processing. 1st profiling spindle (climb and counter rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range: 350 mm NC axis, stepless > Radial adjustment range: 80 mm NC axis, stepless > Spindle speed: 6,000 rpm > Tool rotation diameter min.: 140 mm > Tool rotation diameter max.: 232 mm 2nd profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range: 350 mm NC axis, stepless > Radial adjustment range: 80 mm NC axis, stepless > Spindle speed: 6,000 rpm > Tool rotation diameter min.: 140 mm > Tool rotation diameter max.: 232 mm 3rd profile milling unit (grooving unit from above) ..... > Position: horizontal top > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range: 30 mm NC axis, stepless > Radial adjustment range: 125 mm NC axis, stepless > Spindle speed...

Stav: použitý, Slotting spindle 1 pc. Number of milling units 5 pcs. Spindle diameter 50 mm Control Weinig, PC-Nexus # 2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and fully checked before delivery ----- Technical Data Summary (Any additionally included accessories upon request) Pos. 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment pneumatically controlled in 8 positions, e.g. for top edge rounding > Laser guide light for identifying the saw section Pos. 2: Horizontal rounding unit, below ----- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool swing diameter: 130 mm > Axial adjustment mechanically coupled with cross-cut saw > Radial adjustment pneumatically controlled on/off NC-controlled length stop ----- > Length: 3,500 mm > Electronic length stop Pos. 3: Tenoning and slotting spindle ----- > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Spindle stroke, vertical: variable 254 mm, continuously adjustable, NC-controlled > Spindle speed: 3,500 rpm > Max. tool swing diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 4: 1st profiling spindle (climb and conventional milling) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 7.5 kW Dwedpfsvu Hghex Agnjc Pos. 5: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Spindle stroke, vertical: variable 254 mm, continuously adjustable, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash bar guide consisting of: Guide rail in the stop (area of the climb milling spindle), Sash support bar from above in the area of the vertical profiling unit on the right and profiling spindle. Pos. 6: Horizontal profiling unit, above ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool swing diameter: 130 mm > Axial adjustment: 30 mm, 8 positions > Radial adjustment: 125 mm, 8 positions Pos. 7: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions > Radial adjustment: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool swing diameter: 210 mm > Motor power: 3.0 kW Pos. 8: Profiling/grooving unit from below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Stav: použitý, Slotting spindle: 1 pc Number of milling units: 4 pcs Spindle diameter: 50 mm Control: Weinig, PC-Nexus 4 Weinig Unicontrol 10 CNC - spindles radial and axial CNC-controlled Machine overhauled in 2024 by Weinig factory service. Control system upgraded to Siemens S7 677 C with new membrane touch panel. Comes with the following processing units: Cross-cut saw ----- With laser alignment light, motor power 3 kW, spindle diameter 40 mm, Spindle speed: 3,000 rpm Axial adjustment via NC-axis Radial adjustment pneumatic, 8 positions for top edge rounding Bottom unit for edge rounding ----- Axial adjustment together with cross-cut saw Tenoning and slotting spindle ----- Motor power: 15 kW Spindle diameter: 50 mm Dwodpew Im H Sofx Agnec Spindle speed: 2,925 rpm Tool diameter min. 380, max. 400 mm Tool clamping length: 640 mm Axial adjustment CNC axis Axial travel: 580 mm Adjustment speed: 100 mm/sec 1st profile spindle (climb & conventional milling) ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool clamping length: 400 mm with support bearing Axial and radial adjustment via CNC axis 2nd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool clamping length: 400 mm with support bearing Axial and radial adjustment via CNC axis Horizontal profile milling unit, top ----- Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 9,000 rpm Pneumatic adjustment, 8 positions axial and radial Vertical profile milling unit, right at machine end ----- Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5,850 rpm Pneumatic adjustment, 8 positions axial and radial Additional equipment ----- CNC-controlled length stop, mounted on slot table For lengths up to 3,500 mm, incl. positioning cross-cut saw integrated in control Studio window setup, swivels 60° to both sides Paired-workpiece kit with automatic separation and handover Climb feed system with window automation for sash profiling Sash profiling cart for narrow sash widths Air conditioning unit in the control cabinet PC control NEXUS Automatic turning system Lamella conveyor incl. transport belt for return transport of workpieces to operator (Technical data according to manufacturer – without guarantee).

Stav: použitý, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control system: Weinig, PC-Nexus #2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and completely inspected prior to delivery Technical Data Overview Djdpfx Agsvu Hfqjnjwc (additional included accessories on request) Pos. 1: Crosscut Saw ----- > Crosscut saw, electronic, horizontally adjustable – stepless > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide light for precise identification of saw cut > NC length stop, mounted on slot table included Positioning of the crosscut saw integrated in control > Length: 3,500 mm Pos. 2: Tenoning and Slot Spindle ----- > Number of tools: variable, stepless adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st Profiling Spindle (Conventional and Counter-Rotating) > Position: vertical, right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling Spindle ----- > Position: vertical, right > Number of tools: variable, stepless adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially controlled pneumatically, 2 positions Sash bar guide consisting of: Stop guide rail (area of conventional spindle), Sash bar support from above in the area of the vertical right profiling unit and profiling spindle. Pos. 5: Horizontal Top Profiling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool circle: 130 mm > Axial adjustment: 30 mm, 8 positions via pneumatic turret > Radial adjustment: 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical, right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions via pneumatic turret > Radial adjustment: 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool circle: 210 mm > Motor power: 3.0 kW Further Features ----- > Online-capable > Rebating device for splinter-free rebating > Dual workpiece machining package > Return feed unit for single-operator use: lamella conveyor > Screen control > Tilt window feature > Electronic angle display for tilt windows > Industrial PC, PC control/NEXUS > Weinig model production programme > Without processing tools No original pictures available yet. Photos show identical machine from our archive ----- Price of the above-mentioned machine on request! ----- Option at additional cost: EUR 6,500.00 ...

Stav: použitý, Slot spindle 1 pc. Number of milling units 0 pcs. Spindle diameter 40 mm Small window production unit consisting of: Machines will be cleaned and inspected before delivery ----- 1) Haberkorn FZS1 slotting machine 2) Okoma SF3F spindle moulder 3) Oertli tools for Haberkorn and Okoma machines Timber windows: 1 set IV 68/78/88 and 1 set timber-aluminium windows IV 68/78 year 2011 Dsdpfx Agsxa Hi Nenswc 4) Götzinger OBM Plus corner hinge and olive drilling machine, Maco MultiMatic hardware ----- Technical manufacturer’s description: - Haberkorn FZS1 slotting machine with automatic feed - Infinitely variable height adjustment, Ø 40 mm Cross-cut saw: - Spindle arrangement: top - Three-phase motor: 3 kW - Spindle diameter: 30 mm - Speed: 2800 rpm - Saw blade diameter: 400 mm - Automatic brake with speed monitoring - Horizontal positioning pneumatic, adjustable manually - Safety and extraction hood with 100 mm extraction connection Slot spindle Ø 40 mm: - Power: 7.5 kW - Speed: 4200 rpm - Usable length: 252 mm - Maximum tool diameter: 340 mm - 220 mm stroke, infinitely variable height adjustment via precision recirculating ball screw - Safety and extraction hood with 180 mm extraction connection - Automatic brake with speed monitoring Studio table: - Swivel range +/- 65° - Automated change of counterwood (programmable) - Pneumatic clamp - High-precision electronic degree display - Automatic length compensation - Counterwood always in cutting plane at every angle setting Options: - Laser for workpiece positioning - Saw position pneumatic - Length stop LA 2500 mm + 1850 mm extension ----- 2) Okoma SF3F spindle moulder with lift spindle, 3 tools - Extraction connection 2 x 120 mm - Spindle length 270 mm - Opposing fence with fine adjustment and turret head - Triple lift, max. stroke 90 mm - Glazing bead separator saw with safety and extraction hood, 80 mm diameter - 8-roller power feeder with stand and pressure arm, required for glazing bead separator saw setup - Pneumatically activated insertion device for edge gear, speed 6000 rpm - 2 x 3 kW motor - Mounting diameter 30 mm ----- 3) Oertli tools for Haberkorn and Okoma machines - 1 set timber windows IV 68/78/88 - 1 set timber-aluminium windows IV 68/78 ----- 4) Götzinger OBM Plus corner hinge and olive drilling machine - Corner and stay hinge, plus handle olive drilling - Vertical drilling unit with: - Quick-change drill head - Pneumatic feed via foot pedal - 1x olive drilling head 24 mm - 1x corner hinge double head - Maco MultiMatic hardware - 1x adjustable flip stop left with 6 stops - 1x adjustable flip stop right with 6 stops - 1x complete machine stand with shelf - 220/400 V, 60 Hz, 1.3 kW - 1x roller conveyor approx. 1 m with 2 rollers - 1x roller conveyor approx. 1.5 m with 3 rollers ----- Price for the above-mentioned machines upon request! Plus packaging and shipping ----- (Technical specifications according to manufacturer - no guarantee!) All prices net, plus statutory VAT.

Stav: použitý, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm 1 Used Weinig Unicontrol 6 Window Production Line ----- For sale on behalf of customer Manufacturer's description: For the production of single parts, assemblies, and small series. Spindle Arrangement: One crosscut saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning-slotting spindle and profiling spindle suitable for mounting multiple tools one above the other, equipped with pneumatic spindle movement. Slotting table with motor-driven table movement and automatic transfer into the continuous, chainless rubber roller drive feed of the profiling unit, feed height adjustment manual. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifier for frame or sash external dimension. Tool position control (longitudinal and cross machining) via selector switch from the control panel. Technical Data ----- Crosscut saw ----- Number of tools: 1 Spindle speed: 2,800 rpm Spindle diameter: 40 mm Max. tool diameter: 350 mm Motor: 3 kW Tenoning and slotting spindle ----- Number of tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Max. tool diameter: 320 mm Motor: 11 kW Profiling spindle ----- Number of tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Max. tool diameter: 232 mm Motor: 11 kW Special Equipment: Synchronous Spindle ----- Pneumatically actuated forward-backward movement for tear-free re-milling of window sashes, frames, and doors. Spindle diameter: 50 mm, 4 kW Tool clamping length: 120 mm, min. tool diameter 112-140 mm, Max. tool diameter: 232 mm, Spindle speed: 6,000 rpm Motor upgrade for synchronous spindle from 4 kW to 7.5 kW Screen control for 99 window types, 1 type can contain up to 8 different parts with 2 end profiles each and 2 longitudinal profiles. Manufacturing options: single parts, double parts, per frame, serial production, re-milling. Data entry via keyboard with integrated operator guidance and fault diagnosis. Dwsdpfx Agsw I Ea Djnjc 1 Grooving spindle from above ----- Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm, with feather key 10 x 4 mm Mounting length: 13 mm Clamping length: 40 mm Axial indexing: 2 positions Radial indexing: 2 positions Max. tool diameter: 130 mm Motor upgrade for grooving spindle from 2.2 kW to 3 kW 1 Hardware milling unit, right side: ----- For routing the hardware groove in the re-milling operation or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch in the control panel. Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool swing diameter: min. 140 mm, max. 180 mm Home position below table level: 10 mm Special design hardware milling head: Clamping length: 150 mm Axial stroke: 80 mm, 3 positions 3 tools Radial indexing: 2 positions Motor upgrade for hardware milling spindle from 2.2 kW to 3 kW Hardware milling spindle for 230 mm tool diameter at and above table height Electrical height adjustment of the feed with selector switch in the control panel for 2 wood dimensions, incl...

Stav: použitý, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm 1 used Weinig Unicontrol 6 with GLS ----- For sale on behalf of customer Technical Data Summary ----- 1. Cross Cut Saw ----- Cross cut saw pneumatic, against 8-position revolver stop Spindle speed: 2800 rpm Spindle diameter: 40 mm Max. tool diameter: 350 mm Motor power: 3 kW Laser guide for cut line detection Manual length stop 4100 mm 1. Tenoning and Slotting Spindle ----- Number of tools: 3 / 4 pcs. Tool clamping length: 320 mm Vertical spindle stroke pneumatic: 240 mm for timber thickness IV 68-92 Spindle speed: 3500 rpm Spindle diameter: 50 mm Max. tool diameter: 320 mm Motor power: 11 kW 1. Profiling Spindle – Synchronous Spindle (climb and conventional milling) ----- Position: vertical right Number of tools: 1 pc. Tool clamping length: 120 mm Spindle speed: 6000 rpm Spindle diameter: 50 mm Max. tool swing: 232 mm Motor power: 7.5 kW 2. Profiling Spindle ----- Position: vertical right Dwsdpjw Im Hxofx Agnoc Number of tools: 3 / 4 pcs. Tool clamping length: 320 mm Vertical spindle stroke pneumatic: 240 mm for timber thickness IV 68-92 Spindle speed: 6000 rpm Spindle diameter: 50 mm Max. tool swing: 232 mm Motor power: 11 kW 3. Profiling Spindle (Hardware Spindle) ----- Position: vertical right Number of tools: 3 pcs. Spindle speed: 6000 rpm Spindle diameter: 40 mm Max. tool swing: 180 mm Motor power: 3 kW Clamping length: 150 mm 4. Glazing Bead Saw, horizontally/vertically indexed ----- Position: horizontal, top Number of tools: 1 pc. Tool clamping length: 40 mm Spindle diameter: 40 mm Motor power: 3 kW Axial indexing: 2 positions Radial indexing: 2 positions Additional Features ----- Scribing station to avoid tear-out\nDouble component feed Return conveyor for single-operator usage at working height: pivoting bath Screen control with 99 programs Inclined window configuration Electronic angle display for inclined windows Option Window Tooling OPPOLD Year 2013: Oppold IV 68/78/92 Timber Oppold IV 68/78 Timber-Aluminium (Technical data as provided by manufacturer – subject to change!)

Stav: použitý, Rok výroby: 2023, Rozmery (dĺžka/šírka/výška), mm Filtračná plocha: 122 m² Počet filtračných vakov, ks Na predaj na zákazku zákazníka Technické údaje v PDF prílohe ----- Silo na triesky Schuko, vrátane odsávacieho zariadenia s pretlakovým filtrom, priemyselný briketovací lis v liatinovom vyhotovení Typ: Compacto CT 1100 S-20 ----- Poz. 1: Schuko briketovací lis a odsávacie zariadenie Poz. 2: Schuko radiálny ventilátor umiestnený na strane surového vzduchu Poz. 3: Schuko potrubné komponenty Poz. 4: Schuko pneumatická energetická uzávierka Poz. 5: Schuko pretlaková filtračná jednotka Poz. 6: Schuko spätný vzduch Dedpfx Ajw Nh Elognewc Poz. 7: Schuko bezpečnostné komponenty podľa EN 12779 Poz. 8: Schuko priemyselný briketovací lis v liatinovom prevedení Poz. 9: Schuko elektrický rozvádzač ----- Cena uvedeného odsávacieho zariadenia na požiadanie! ----- (technické údaje podľa výrobcu – bez záruky!) Všetky ceny sú uvedené bez DPH.

Stav: použitý, Slot spindle, 0 Number of milling units, pcs. Spindle diameter, mm Number of machines, pcs. Operational dissolution woodworking (window manufacturing) ----- Machines are available immediately. All machines still set up for demonstration. Pos. 1: Weinig, PFA 17N, year 1967 Four-side planer, 6 spindles, chain drive, with glazing bead separator, Dwodpfxsw Im Hre Agnsc with planing heads Stepless feed speed, working width 170 mm, working height 120 mm Electric height adjustment for feed beam Pos. 2: MAPO Spu 180, year 1992, veneer machine, mobile Pos. 3: Gubisch CW 2, year 1998, angle unit with return feed, with Leitz IV 68 wood, wood-aluminum; Gold IV 78 wood 1 slot spindle, 3 profile spindles Pos. 4: Götzinger OBM, year 1998, corner bearing and olive drilling machine, 1 olive drill head, 1 drill head for Roto NT corner bearing with left and right roller tables and stops, drilling on individual parts or glued frames Pos. 5: Panhans Type 259, year 1995, tilting spindle moulder with extended support table and frame milling fence, Haffner feed unit with 4 rollers, 3000/4000/5000/6000 rpm Pos. 6: Rapid chain mortiser Pos. 7: Klein und Söhne, combined surface planer and thickness planer Pos. 8: Filter house with silo, filtration system, fan Spänex SHB 50-250-SPS, year 1998 briquetting press with automatic control Spänex return air duct for summer/winter operation, return air ceiling filter ----- Machines must be dismantled and loaded by the buyer. Subject to errors and prior sale.

Stav: použitý, Rok výroby: 2007, Slot spindle 3 pcs. Number of milling units: 5 pcs. Spindle diameter: 50 mm Control: Control 100 PC SCM Windor 100 CNC – still in operation, available for inspection until the end of December 2025 ----- High-performance and flexible CNC production line for windows and doors Machining of workpieces up to max. 4500 mm length, 250 mm width and 150 mm thickness Consisting of Windor 60 Version B Infeed conveyor Slotting Unit: ----- Pos. 1: Cross-cut saw ----- - Motor 4 kW - 3000 rpm - Spindle diameter 40 mm - Maximum tool diameter 400 mm, bore 80 mm Pos. 2: 1st slot spindle ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 3500 rpm - Maximum tool diameter 370 mm - Counter device "Jolly" - Stepless vertical positioning - Interpolating rotation, automatic angled window device +/- 60 degrees Pos. 3: Electrospindle with HSK 63 F tool holder ----- - Min./max. rotation speed 1,000–12,000 rpm - Maximum motor power 11 kW - Water cooling - Rapid 24 automatic tool changer with 24 positions Pos. 4: 2nd slot spindle ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 3500 rpm - Maximum tool diameter 370 mm - Counter device "Jolly" - Stepless vertical positioning - Interpolating rotation, automatic angled window device +/- 60 degrees Pos. 5: 3rd slot spindle ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 3500 rpm - Maximum tool diameter 370 mm - Counter device "Jolly" - Stepless vertical positioning Fleximat ----- Including left and right stops with horizontal CNC adjustment for the following through-feed operations: Lock case milling and 9-degree "Anuba" drilling from the right. Dowel drilling and striker plate marking from left and right, each with 7 spindles. Cup hinge drillings and olive drillings from above. Profiling Unit ----- Pos. 5: Power 2000 F4: Electrospindle with HSK 63 F tool holder ----- - Working from the left - Min./max. rotation speed 1,000–18,000 rpm Dwjdpfxow Im Iis Agnjc - Maximum motor power 12 kW - Water cooling - Rapid 24 automatic tool changer with 24 positions Pos. 6: 1st profiling spindle from the right ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 6000 rpm - Tool diameter min./max. 130–250 mm - Stepless vertical positioning - Stepless horizontal positioning Pos. 7: 2nd profiling spindle from the right ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 6000 rpm - Tool diameter min./max. 130–250 mm - Stepless vertical positioning - Stepless horizontal positioning Pos. 7: 3rd profiling spindle from the right ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter 50 mm - Motor 11 kW - 6000 rpm - ...