Chiron Dz 18 W kúpiť použité (2)

Stav: pripravené na použitie (použité), Rok výroby: 2021, výrobca ovládačov: SIEMENS, model regulátora: 840D, počet osí: 4, This 3-axis CHIRON DZ 18 W vertical machining center was manufactured in 2021. Consider the opportunity to purchase this CHIRON DZ 18 W vertical machining center. Contact us for further information. Machine Advantages Technical Machine Advantages • Traverse speed (X-Y-Z): 75 m/min • Spindle distance: 400 mm Additional Information - NC rotary table, type ATU 200, integrated in IWW/ - Rotary feedthrough for IWW/ - Axes in the work area/ - Twin-spindle headstock/ - High-speed drive 2 x 25.3 kW - 15%, 12,000 rpm - 140 Nm/ - Tool changer 2 x 35 tool positions, HSK-A 63, 8 kg/ - Traverse drive X-Y-Z 75-75-75 m/min/ - Automatic central grease lubrication/ - Sinumerik 840D solution line, 10.4'' color screen/ - Control/ - Control interface/ - RemoteLine SIE/MTX/ Dcsdpfsx D Nmxjx Af Sod - Maintenance management on display/ - For machining inclined surfaces, SIEMENS/ - Operating hours and workpiece counter on display/ - Control cabinet cooler as door-mounted unit/ - Signal beacon for 3 signals/ - Fluid tower in open design/ - Oil-free maintenance unit/ - Cooling unit/ - Support elements/ - Chip conveyor slat band 1050 mm, rear/08, left/15, 18, 200 l/ - Coolant system KF400-FKA900/900 l, 70 bar/ - Bridge for cables and hoses/ - Machine preparation for internal flushing/ - Flushing of fixtures in the machining station/ - 1 rinse gun outside the splash guard/ - Work area rinse/ - Additional equipment for extraction/extinguishing -/ - Additional equipment for pneumatics/hydraulics -/ - 1860 workpiece carrier control, coarse/ - Hydraulic connection for 200 bar, single-acting/ - Hydraulic connection for 200 bar, double-acting/ - Regulated, oiled flush air connection/ - Hydraulic power unit extension/ - Additional equipment for measurement/tool breakage detection -/ - Measuring probe RLP40Q/ - Whisker switch for tool breakage detection/ - Additional devices for machine operation -/ - Automatic loading door open/close/ - Walk switch/ - Additional equipment: NC control -/ - M-function package/ - Variable clamping logic - Siemens/ - Powersave/ - Siemens tool management/ - Comfort cycle fixture rinsing/ - Revolutionary feed/ - Loader interface with Profinet/ - Direct door detection in 'open' position/ - Commissioning and training/ - Power supply/compressed air 6 bar/ ambient temperature 15°-40°C

Stav: pripravené na použitie (použité), Rok výroby: 2018, pojazdová vzdialenosť osi X: 630 mm, zdvih osi Y: 530 mm, zdvih osi Z: 450 mm, výrobca ovládačov: SIEMENS, model regulátora: 840D solution line, počet osí: 3, This 3-axis CHIRON DZ18W was manufactured in 2018. Ideally suited for vertical precision machining, this model offers a robust construction and reliable performance. Consider the option to purchase this vertical machining center CHIRON DZ18W. Please contact us for further information. Additional Equipment • OPTIONAL: Robot, complete cell with conveyor belts, PLC, rotary station Machine Advantages Technical Machine Advantages • Tool positions: 2x35 • Maximum tool length: 380 mm Additional Information Splash guard with fully enclosed work area/ with loading door, electrically secured/ with replaceable safety windows/ Work area separation with stainless steel louvres/ Height 2340 mm above ground, including machine lighting/ Mini operating panel with start and reset button for M61/M62 pallet organization/ Dcjdpox D Nmfjfx Af Sed Integrated workpiece changer IWW 0/180°/ for optimal chip flow with central steel partition/ Workpiece change time approx. 3.5 seconds, weight-dependent, self-regulating/ via self-learning speed control/ Transport load per side 0 - max. 250 kg/ Maximum 120 kg weight difference between both table sides. Each table side is prepared for installation of rotary table package. Distance between spindle mounting and rotary axis /WW at least 75 mm/ Travel ranges: X-axis 630 mm/ Y-axis 530 mm/ Z-axis 450 mm/ Tank flushing system with coolant connection/ NC rotary table, type ATU 200/ Integrated into the workpiece changer IWW 0/180°/ With hydraulic clamping, holding torque 1,200 Nm, Repeat accuracy +5" with/ face plate © 225 mm, with centering® 60 -0.008, Counter bearing with hydraulic clamping, holding torque 800 Nm, On rotary table and counter bearing side. Swivel radius 285 mm/ 7th or 5th NC axis, plug-in ready/ Controlled pneumatic connection for barrier air/ Controlled hydraulic connection for clamping/ Rotary union 2 x 5-fold/ Rotary table side: 4 x hydraulic/pneumatic, 1 x pneumatic/ 4 x hydraulic/pneumatic on counter bearing side, 1 x pneumatic/ Work area – rotary table assignment/ AF1 rotary table ATU 200/ AF2 rotary table ATU 200/ Dual-spindle head/ Prepared for mounting 2 main spindle motors with spindles/ Spindle distance in X-axis 400 mm/ Main spindle drive with 2 AC motors/ Pneumatic operation, with tool clamping monitoring/ 11.0 kW at 100% duty cycle/ 25.3 kW at 15% duty cycle/ Speed up to 12,000 rpm/ Max. torque 140 Nm/ Drilling capacity 2 x 42 mm/ in steel E355/ Automatic tool changer/ with robust, fully enclosed pick-up chain magazine/ 2 x 35 tool stations/ HSK-A 63 DIN tool holder 69893/ Tool width max. 78 mm/ Tool width with free neighboring stations max. 140 mm/ Tool length max. 380 mm/ Tool weight max. 8.0 kg (max. magazine load 240 kg)/ Tool change time approx. 0.9 s (controller-dependent)/ Chip-to-chip time approx. 2.2 s (controller-dependent)/ Feed drive for X, Y and Z axes/ Digital drives with direct measuring systems, overpressure application/ Rapid traverse speed 75 - 75 - 75 m/min/ Axis acceleration 1.0 - 1.4 - 1.6 g/ SIEMENS CNC control 840D solution line/ incl. 10.4" TFT color monitor / full keyboard / operator panel OP010S/ 1280 1 (TCU / NCU 720.3, 1 channel)/ User interface Operate/ NC RAM 3 MB (max. 1 MB available)/ (up to 200 programs available)/ for running machining programs according to DIN 66025/ CF card with 8 GB memory capacity (max.