Cts kúpiť použité (6 394)

Stav: veľmi dobrý (použitý), CTS Typ: T-40/600 Water-cooled Temperature Test Chamber Control System: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoint values Iedpfx Acex E Tq Ts Hoik - Error messages in plain text - RS 232 interface - Free switching channels for external test specimen control Technical Performance Data Temperature Testing: Temperature range: -40 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating: 2.5 K/min Cooling: 2.5 K/min Heat radiation: approx. 2500 W at +20 °C approx. 2500 W at 0 °C approx. 1800 W at -40 °C The technical data refer to an ambient temperature of +25 °C, nominal voltage 400V, without test specimen, without radiation, and without additional equipment. Dimensions: Test chamber volume: 600 liters Internal chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1120 mm, Depth approx. 1875 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Nominal power: 7.1 kW Nominal current: 12.3 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your safety as a buyer, the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilled with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) If you have further questions, we will be pleased to answer them by phone.

Stav: veľmi dobrý (použitý), CTS Iedpfsx Ekupex Ac Hoik Typ: C-40/350 Klimatická skúšobná komora, chladenie vzduchom Na predaj je profesionálna klimatická skúšobná komora CTS, model C-40/350. Toto zariadenie je určené pre náročné simulácie prostredia v priemysle a je ideálne na testovanie materiálov, elektroniky, v automobilovom, leteckom, vesmírnom sektore a vo výskume. Testovanie teploty: - Teplotný rozsah: -40 °C až +180 °C - Odchýlka teploty: ≤ ±0,3 K (v čase) - Rýchlosť zmeny teploty podľa IEC 60068-3-5: - Ohrievanie: 3,5 K/min - Chladenie: 4 K/min - Tepelná kompenzácia: - cca. 3500 W pri +20 °C - cca. 2000 W pri -20 °C Klimatické skúšky: - Teplotný rozsah: +10 °C až +90 °C - Vlhkostný rozsah: 10% až 95% relatívnej vlhkosti - Rosný bod: +5 °C až 78 °C - Odchýlka teploty: ≤ 1,0 K (v čase) - Odchýlka vlhkosti: ≤ ±3,0 % r.v. (v čase) Technické údaje sa vzťahujú na okolitú teplotu +25 °C, menovité napätie 400 V, bez skúšaného predmetu, bez tepelnej kompenzácie a bez prídavných zariadení. Voliteľná výbava môže ovplyvniť výkonové parametre. Technické prevedenie: - Chladiaca jednotka: vzduchom chladená, tichá prevádzka, plne hermetická, plynulé nastavenie výkonu prostredníctvom elektronického monitorovacieho a riadiaceho systému, ekologické chladivo R404A - Skúšobný priestor: nosnosť podlahy 150 kg / m2 - Polica: nerezová oceľ, plocha 620 x 600 mm, max. zaťaženie na policu 35 kg, maximálne celkové zaťaženie pri plnom obsadení políc 100 kg Riadenie: - 32-bitový ovládač - LCD ovládací panel - Digitálne zobrazenie požadovaných a skutočných hodnôt - Numerické zadávanie požadovaných hodnôt - Hlásenia chýb v zrozumiteľnom texte - Rozhranie RS 232, ethernet - Voľné spínacie kanály na aktiváciu skúšaných objektov Rozmery: - Skúšobný objem: 350 litrov - Vnútorné rozmery: výška 750 mm × šírka 650 mm × hĺbka 720 mm - Vonkajšie rozmery: výška 1800 mm × šírka 850 mm × hĺbka 1640 mm Prevádzkové údaje: - Elektrické pripojenie: 400 V 3/N, 50 Hz - Menovitý výkon: 7,1 kW - Menovitý prúd: 11,5 A - Krytie: IP 54 - Hladina akustického tlaku

Stav: veľmi dobrý (použitý), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test items simultaneously. Device Description This climate test cell allows the functionality or material properties of a test specimen to be evaluated under the influence of temperature and humidity. Efficient air circulation with a correspondingly high recirculation rate ensures optimal transfer to the test item. The air treatment system is located at the rear of the interior. The main units are housed behind the chamber in a separate frame for optimal accessibility. Control is managed via a separate control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. Fresh air flushing of the test chamber is possible via a fan. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with test item and radiant heat, measured at supply air - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Tests: Iodpex Eaxbjfx Ac Hoik - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% r.h. - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1% to ±3% r.h. over time Technical data refer to ambient temperature of +25 °C, nominal voltage of 400 V, without test item, without heat radiation, and without additional equipment. Dimensions: Interior (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: ~2,000 mm, Width: ~2,000 mm, Depth: ~1,400 mm (some variation depending on configuration) Exterior: - Height: ~2,300–2,500 mm - Width: ~2,300–2,600 mm - Depth: ~1,700–2,200 mm (depending on door, frame, accessories, etc.) Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (includes 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R 23 / R 404 A Notes: - Inspection by appointment possible (46325 Borken) - Shipping by freight carrier possible – costs & arrangements upon request - Scope of delivery: (see picture) - Specifications subject to change and errors excepted! - For further questions, please contact us by phone.

Stav: veľmi dobrý (použitý), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test items simultaneously. Device Description This climate test cell allows the functionality or material properties of a test specimen to be evaluated under the influence of temperature and humidity. Efficient air circulation with a correspondingly high recirculation rate ensures optimal transfer to the test item. The air treatment system is located at the rear of the interior. The main units are housed behind the chamber in a separate frame for optimal accessibility. Control is managed via a separate control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. Fresh air flushing of the test chamber is possible via a fan. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with test item and radiant heat, measured at supply air - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% r.h. - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1% to ±3% r.h. over time Iisdpfx Acox Eabps Hok Technical data refer to ambient temperature of +25 °C, nominal voltage of 400 V, without test item, without heat radiation, and without additional equipment. Dimensions: Interior (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: ~2,000 mm, Width: ~2,000 mm, Depth: ~1,400 mm (some variation depending on configuration) Exterior: - Height: ~2,300–2,500 mm - Width: ~2,300–2,600 mm - Depth: ~1,700–2,200 mm (depending on door, frame, accessories, etc.) Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (includes 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R 23 / R 404 A Notes: - Inspection by appointment possible (46325 Borken) - Shipping by freight carrier possible – costs & arrangements upon request - Scope of delivery: (see picture) - Specifications subject to change and errors excepted! - For further questions, please contact us by phone.

Stav: veľmi dobrý (použitý), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test items simultaneously. Device Description This climate test cell allows the functionality or material properties of a test specimen to be evaluated under the influence of temperature and humidity. Efficient air circulation with a correspondingly high recirculation rate ensures optimal transfer to the test item. The air treatment system is located at the rear of the interior. The main units are housed behind the chamber in a separate frame for optimal accessibility. Control is managed via a separate control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. Fresh air flushing of the test chamber is possible via a fan. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time Iijdpfjx D Abpsx Ac Hjk - Temperature change rate, linear with test item and radiant heat, measured at supply air - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% r.h. - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1% to ±3% r.h. over time Technical data refer to ambient temperature of +25 °C, nominal voltage of 400 V, without test item, without heat radiation, and without additional equipment. Dimensions: Interior (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: ~2,000 mm, Width: ~2,000 mm, Depth: ~1,400 mm (some variation depending on configuration) Exterior: - Height: ~2,300–2,500 mm - Width: ~2,300–2,600 mm - Depth: ~1,700–2,200 mm (depending on door, frame, accessories, etc.) Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (includes 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R 23 / R 404 A Notes: - Inspection by appointment possible (46325 Borken) - Shipping by freight carrier possible – costs & arrangements upon request - Scope of delivery: (see picture) - Specifications subject to change and errors excepted! - For further questions, please contact us by phone.

Stav: veľmi dobrý (použitý), CTS CW‑60/11 – Water-cooled Climate Test Chamber The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for performing temperature and humidity tests on several specimens simultaneously. Device Description The climate test chamber enables testing the functionality or material properties of test items under the influence of temperature and humidity. Efficient airflow with a correspondingly high recirculation volume ensures effective heat and climate transfer to the test objects. The air treatment section is located at the rear of the inner chamber. The refrigeration units are housed on a separate frame behind the device, which are easily accessible. The control system is housed in a separate switch cabinet. The control panel is integrated into the switch cabinet door. For dehumidification of the test chamber, a self-regenerating compressed air dryer is installed. Fresh air flushing of the chamber is possible via a fan. Technical Specifications: Temperature Tests: - Temperature range: –60 °C to +90 °C - Temperature deviation over time: ±0.5 to 1 K - Spatial temperature deviation: ±1 K at 200 mm from the wall - Rate of temperature change (supply air, linear): - Heating: 2 K/min from –40 °C to +85 °C - Cooling: 2 K/min from +85 °C to –40 °C Climate Testing: - Temperature range: +10 °C to +95 °C Iisdpex Ankyefx Ac Hsk - Humidity range: 10% to 95% RH - Dew point range: +5 °C to +89 °C - Temperature deviation over time: ±0.5 K - Humidity deviation over time: ±2 – ±5% RH - Without heat radiation - After stabilization period (Technical specifications based on an ambient temperature of +25 °C, rated voltage 400 V, without test specimens, without radiation, and without additional equipment.) Dimensions: - Internal dimensions (test chamber / usable space): - Volume: approximately 11,000 liters (11 m³) - Internal dimensions (approx.): Width: 2,100 mm; Depth: 2,530 mm; Height: 2,200 mm (may vary depending on configuration) - External dimensions: Width: 2,700 mm; Depth: 5,200 mm; Height: 2,520 mm (depending on door, frame, accessories, etc.) Operating Data: - Rated power: 84.4 kW - Rated voltage: 400 V 3/N 50 Hz - Rated current: 131.4 A Technical Design: - Refrigeration unit - Water-cooled, low-noise, semi-hermetic - Stepless capacity adjustment by electronic monitoring and control system - Environmentally friendly refrigerants R 23 / R 404 A Weight: 6,000 kg Notes: - Inspection by appointment possible (46325 Borken) - Shipping by freight forwarder possible – Costs & arrangements on request - Scope of delivery: (see image) (Subject to changes and errors in the technical data and information!) If you have any further questions, we are happy to assist you by phone.

Stav: veľmi dobrý (použitý), CTS CW‑60/11 – Water-Cooled Climate Test Chamber The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed to carry out temperature and humidity tests on multiple test specimens simultaneously. Device Description This climate test chamber enables the function or material properties of a test object to be evaluated under the influence of temperature and humidity. Efficient air circulation with a correspondingly high recirculation rate guarantees effective thermal transfer to the test specimen. The air conditioning section is located at the rear of the internal chamber. The aggregates are situated behind the unit in a separate frame and are easily accessible. The control system is housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For chamber dehumidification, the unit is equipped with a self-regenerating compressed air dryer. Fresh air can be purged into the chamber via a fan. Technical Specifications: Temperature Testing: - Temperature range: –60 °C to +90 °C - Temperature deviation (temporal): ±0.5 to 1 K - Temperature deviation (spatial): ±1 K at 200 mm from the wall - Rate of temperature change (supply air, linear): - Heating: 2 K/min from –40 °C to +85 °C - Cooling: 2 K/min from +85 °C to –40 °C Climatic Testing: - Temperature range: +10 °C to +95 °C - Humidity range: 10% to 95% RH - Dew point range: +5 °C to +89 °C - Temperature deviation (temporal): ±0.5 K - Humidity deviation (temporal): ±2 to ±5% RH *Without thermal radiation; values refer to steady-state conditions Technical data based on ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, without irradiation and without additional equipment. Dimensions: Internal dimensions (test space / usable space): - Volume: approx. 11,000 liters (11 m³) - Internal dimensions (approx.): Width: 2100 mm; Depth: 2530 mm; Height: 2200 mm (may vary slightly depending on configuration) External dimensions: - Width: 2700 mm; Depth: 5200 mm; Height: 2520 mm (depending on door, frame, accessories, etc.) Iedpfxox Anipo Ac Hjik Operating Data: - Nominal power: 84.4 kW - Nominal voltage: 400 V 3/N 50 Hz - Nominal current: 131.4 A Technical Design: Refrigeration unit: - Water-cooled, low noise, semi-hermetic - Infinitely variable output adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Weight: 6000 kg Notes: - Inspection by arrangement possible (46325 Borken) - Shipping via freight carrier possible – costs & organization upon request - Delivery contents: (See picture) (Subject to modifications and errors in the technical data. All details provided without guarantee!) Further questions? Please feel free to contact us by phone.

Stav: veľmi dobrý (použitý), CTS Typ: T-40/600 /011232 CTS temperature test chamber, water-cooled Includes metal struts to increase floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height: approx. 850 mm, Width: approx. 850 mm, Depth: approx. 830 mm External dimensions: Height: approx. 1900 mm, Width: approx. 1050 mm, Depth: approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Nominal power: approx. 5.5 kW Nominal current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg Important safety information for buyers: Isdpjwfdniofx Ac Heik The following measures are carried out in advance on all of our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Stav: veľmi dobrý (použitý), CTS Model: T-40/2000 Iodeup T Uqjpfx Ac Hoik Air-cooled Temperature Test Chamber Technical Specifications: Cooling Unit: Air-cooled, low-noise, fully hermetic compressor, stepless capacity control via electronic monitoring and control system, eco-friendly refrigerant R404A. Door: Fully openable door, left-hinged, single-handed operation, lockable. Shelf: Stainless steel, support surface 970 x 980 + 500 mm Load per shelf max. 35 kg Total load with maximum shelves: 100 kg Test Chamber Lighting: 3x halogen lamp 20 W, 12 V Control: 32-bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for user-side test specimen control Temperature Range: -40°C to +180°C Rated Voltage: 400V 3/N 50Hz Rated Power: 10.4 kW Rated Current: 17.2 A Compressor: TFH2516Z Duct Feedthrough NW 50 Control Panel Window: 570x710 mm Electrical connection, cable length 5m Technical Performance Data: Temperature Testing: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating: 2.5 K/min Cooling: 1.5 K/min Heat Radiation: Approx. 2500 W at +20°C Approx. 2100 W at ± 0°C Approx. 1500 W at -20°C Technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without incoming radiation, and without additional equipment. Dimensions: Test volume: 2000 liters Internal dimensions: Height 900, Width 975, Depth 2200 mm External dimensions: Height 1950, Width 1290, Depth 3145 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain, non-pressurized R 1/2" female thread Sound pressure level (measured at 1 m from the front, according to DIN EN ISO 3744): < 55 dB(A) Weight: approx. 1200 kg For your safety as a buyer, please note the following information! The following measures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data and specifications are reserved!) We are happy to answer any further questions by phone.

Stav: veľmi dobrý (použitý), Here we offer you a temperature test chamber. Water-cooled Technical Specifications: Temperature operating range: Temperature range in °C: -70 / +180°C Change rate according to DIN 50 011, Part 12: Cooling rate: approx. 5 K/min Heating rate: approx. 5 K/min Dimensions: Test volume: 350 liters Test chamber dimensions (H x W x D): approx. 750 mm x 650 mm x 720 mm External dimensions (H x W x D): approx. 1800 mm x 850 mm x 1640 mm Operating data: Power supply: 400 V, 3/N, 50 Hz Rated power: 13.3 kW Refrigerant: R404A / R23 Weight: approx. 650 kg Model: TS-70/350 For your safety as a buyer, please note the following information! The following procedures are carried out on all chambers we offer prior to delivery: 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test cycle monitored by calibrated instruments. Condition: used Scope of supply: (see picture) Iijdpfsn Sl T Ssx Ac Hek (Specifications and technical details subject to change and errors!) For further questions, we are happy to assist you by phone.

Stav: veľmi dobrý (použitý), CTS Temperature Test Chamber We offer you a CTS temperature test chamber. Water-cooled Model series: T-40/600 Includes metal struts to increase floor load capacity Test chamber volume: 600 litres Test chamber dimensions: Iijdshxyg Hepfx Ac Hek Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R404A Weight: 550 kg Type: T-40/600 /011232 For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors!) If you have any further questions, we are happy to answer them for you by phone.

Stav: veľmi dobrý (použitý), CTS Klimatic test chamber C-55/1000 Li, water-cooled Temperature range: -50°C to +100°C Humidity range: 5 to 95% r.H. Dew point range: 5°C to +78°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Rated current: 18 A Compressor: TFH2511Z / TFH2511Z refrigerant R404A/R23 The CTS cabinet series model designation is composed as follows: e.g. Type C -55/1000/Li 1) C means: Climate 2) -55 means: lower temperature limit -55°C 3) 1000 means: 1000 liters test chamber volume 4) Li means: special equipment for tests with lithium-ion batteries Control: 32-bit controller LCD operating panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for custom test item control Test chamber lighting: Energy-efficient, high-luminance LED light bar mounted on the door Support grid: Stainless steel, support surface 970 x 980 mm Max. load per grid: 35 kg Total load at max. grid configuration: 100 kg 1a Feedthrough NW50 1b Feedthrough 2x NW125 1c Feedthrough 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range: -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating 2.5 K/min Cooling 2.5 K/min Heat compensation: approx. 4000 W at +20°C, approx. 2200 W at -40°C Climate tests: Temperature range: +5°C to +95°C Humidity range: 5% to 95% relative humidity Dew point range: +5°C to +78°C Temperature deviation ≤ ±1.0 K over time Humidity deviation ≤ ±3.0% r.H. over time The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional accessories. Options may affect performance data. Dimensions: Test chamber volume: 1000 liters Test chamber dimensions: height approx. 1000 mm, width approx. 860 mm, depth approx. 1100 mm External dimensions: height approx. 1950 mm, width approx. 1270 mm, depth approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated output 9.5 kW Protection class IP54 Sound pressure level < 58 dB(A) (measured in accordance with DIN EN ISO 3744, at 1 meter distance from the front) Weight approx. 1000 kg Heat emission into installation room: 10.4 kW Cooling unit: Water-cooled, low noise, fully hermetic Stepless power adjustment via electronic monitoring and control system Environmentally friendly refrigerants R404A/R23 For your safety as the buyer, please note the following information! The following points will be carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant Iiodpfxova Hi Ho Ac Hok 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data and information excepted!) Further questions can be answered by phone.

Stav: použitý, Type: CS-70/900 CTS climate test chamber with humidity, water-cooled (has been converted to R-452a) Temperature range: -70 °C to +180°C Humidity range: 10–98% r.h. Test chamber dimensions: Height approx. 870 mm / Width approx. 1000 mm / Depth approx. 1000 mm External dimensions: Height approx. 1950 mm / Width approx. 1200 mm / Depth approx. 2220 mm Control cabinet: Height approx. 2100 mm / Width approx. 800 mm / Depth approx. 400 mm Test chamber volume: 900 liters Refrigerants: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50Hz Connected load: 21.2 kW, Rated current: 35.7 A Climate test chamber weight: 900 kg Control cabinet weight: 150 kg For your safety as the buyer, please take note of the following information! Ijdpfx Asxb Dm Ijc Heik The following points are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful checking, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Stav: veľmi dobrý (použitý), CTS Type: C-40/350 Ex/l Climatic Test Chamber, Water-cooled ATEX Zone 1 The 'Ex/l' designation indicates that this climatic test chamber is suitable for use in hazardous areas classified as Zone 1. This means it is intended for environments where explosive atmospheres may occur. Such equipment is specially designed and tested to ensure safety in these conditions. Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K (over time) Temperature change rate according to IEC 60068-3-5: Heating: 3.5 K/min Cooling: 4 K/min Heat compensation: approx. 3500 W at +20°C approx. 2000 W at -20°C Climate Testing: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to +78°C Temperature deviation: ≤ 1.0 K (over time) Humidity deviation: ≤ +3.0% rH (over time) All technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data. Technical Specification: Refrigeration unit: water-cooled, low noise, fully hermetic, infinitely variable capacity adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber floor load capacity: 150 kg/m² Wire shelf: stainless steel, usable area 620 x 600 mm, max. load per shelf 35 kg, total load with max. number of shelves 100 kg Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numeric input for setpoints Plain text fault messages RS 232 interface Ethernet interface Free control channels for customer-specific test specimen control Dimensions: Test volume: 350 liters Internal dimensions: height 750 mm × width 650 mm × depth 720 mm Iijdpfx Ajwvr H Ujc Hok External dimensions: height 1800 mm × width 850 mm × depth 1640 mm Operating Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated power: 7.15 kW Rated current: 14.3 A Protection class: IP54 Sound pressure level:

Stav: veľmi dobrý (použitý), CTS Temperature Test Chamber T-55/1000 Li, Water-Cooled Temperature Range: -50°C to +100°C Rated Voltage: 400V 3/N 50Hz Rated Power: 9.5 kW Rated Current: 18 A Compressor: TFH2511Z / TFH2511Z, Refrigerants R404A/R23 Model designation of the CTS cabinet series is structured as follows: Iiodpfx Asvba Raec Hok e.g., Type T -55/1000/Li 1) T stands for: Temperature 2) -55 indicates: minimum temperature -55°C 3) 1000 indicates: 1000-liter test chamber volume 4) Li indicates: special configuration for tests with lithium-ion accumulators Control: 32-bit controller LCD control panel Digital display of set and actual values Numerical setpoint input Error messages in plain text Ethernet interface RS 232 interface Free switching channels for customer-side test item control Test Chamber Lighting: Energy-efficient, high-intensity LED light bar mounted on the door Rack: Stainless steel, usable area 970 x 980 mm Max. load per rack: 35 kg Total load with maximum rack installation: 100 kg Feedthroughs: 1x NW50 2x NW125 2x Rp 3 1/4° for Minimax Technical Performance Data: Temperature Testing: Temperature range: -50°C to +100°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating: 2.5 K/min Cooling: 2.5 K/min Thermal compensation: Approx. 4000 W at +20°C Approx. 2200 W at -40°C The technical specifications refer to an ambient temperature of +25°C, rated voltage 400V, without test item, thermal compensation, or additional equipment. Options may affect performance data. Dimensions: Test volume: 1000 liters Internal dimensions (approx.): Height 1000 mm, Width 860 mm, Depth 1100 mm External dimensions (approx.): Height 1950 mm, Width 1270 mm, Depth 1900 mm Operating Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated current: 18 A Rated power: 9.5 kW Degree of protection: IP 54 Sound pressure level: < 58 dB(A) (measured according to DIN EN ISO 3744 at 1m distance from the front) Weight approx. 1000 kg Heat emission to installation area: 10.4 kW Cooling Unit: Water-cooled, low-noise, fully hermetic Stepless power control via electronic monitoring and control system Environmentally friendly refrigerants R404A/R23 Important Safety Information for Buyers! The following steps are performed on our offered chambers prior to delivery: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) Further questions can be answered by phone.

Stav: veľmi dobrý (použitý), CTS testovacia klimatická komora Ponúkame CTS klimatickú komoru. Chladenie: vzduchom Objem testovacieho priestoru: 200 litrov Vnútorné rozmery testovacieho priestoru: výška 750 mm, šírka 650 mm, hĺbka 400 mm Iiodpohwhzwofx Ac Hek Vonkajšie rozmery: výška 1800 mm, šírka 920 mm, hĺbka 1345 mm Teplotný pracovný rozsah: Teplotný rozsah: -40°C až +180°C Rýchlosť chladenia: 4 K/min Rýchlosť ohrievania: 4 K/min Maximálna tepelná záťaž pri +20°C: 3500 W Teplotná stálosť v čase: ≤± 0,3 K Klimatický pracovný rozsah: Teplotný rozsah: +10°C až +95°C Rozsah vlhkosti: +10 % až +98 % rF Pripojenie: 400 V +6% / -10%, 3/N, 50 Hz Menovitý prúd: 9,4 A Menovitý výkon: 4,8 kW Hmotnosť: cca 450 kg Chladivo: R404A Typ: CTS C-40/200 Pri našich ponúkaných komorách vykonávame nasledujúce kroky: 1. Kontrola funkčnosti a výmena potrebných komponentov 2. Nové naplnenie chladivom v súlade s legislatívou 3. Po úspešnej kontrole je komora podrobená skúšobnej prevádzke, ktorú monitorujeme kalibrovanými zariadeniami. Stav: použitý / used Obsah balenia: (viď obrázok) (Zmeny a chyby v technických údajoch sú vyhradené!) Ďalšie otázky radi zodpovieme telefonicky.

Stav: dobrý (použitý), CTS Model: TSR-30/1000 Water-cooled The type designation of the CTS cabinet series is composed as follows: For example, Type TSR-30/1000 1) T stands for: Temperature 2) S stands for: Stress Screening 3) R stands for: External Conditioning 4) -30 signifies: minimum temperature -30°C 5) 1000 signifies: 1000 liters test chamber volume Technical performance data: A) TSR-30/1000 base unit without hose connections, i.e., when used as a standalone temperature test chamber Temperature tests: Temperature range: -40°C to +180°C Final temperature: -45°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating: 6.0 K/min Cooling: 5.0 K/min Heat emission: approx. 5000 W at +20°C approx. 4200 W at ±0°C approx. 3000 W at -20°C Technical data based on ambient temperature +25°C, Nominal voltage 400V, without test specimen, no irradiation, and without additional equipment. Airflow volume: approx. 2000 m³/h B) TSR-30/1000 base unit with hose connections, for connection to a customer-supplied external test chamber Temperature tests: Temperature range: -30°C to +170°C Temperature deviation: ≤ ±0.1 to 0.5 K over time Average temperature change rate, measured in closed-loop circuit Heating: 4.0 K/min Cooling: 4.0 K/min within the range of +150°C to -10°C Technical data based on ambient temperature +25°C, Nominal voltage 400V, without test specimen, no irradiation, without additional equipment, measured in closed-loop circuit Note: The customer-supplied external test chamber must be completely sealed and properly insulated; any feedthroughs must be optimally sealed by the customer. Dimensions: Test volume: 1,000 liters Air recirculation port: Ø 200 mm Test chamber dimensions: Height 900 mm, Width 1,000 mm, Depth 1,100 mm External dimensions: Height 1,950 mm, Width 1,270 mm, Depth 2,245 mm Technical design: Refrigeration unit: Water-cooled, low-noise, fully hermetic Infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Door: Fully opening door, left hinged, One-hand operation, lockable. Insert shelf: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Maximum total load with full shelf configuration: 100 kg Test chamber illumination: Halogen lamp 20 W, 12 V Control: - 32-bit controller - LCD control panel Operating data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated power: 13.3 kW Protection rating: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 850 kg For your safety as a buyer, please note the following information! Iiedpfxsrivfco Ac Hek The following procedures are carried out in advance on the chambers we offer: 1. Functional test and replacement of necessary components 2. New fill with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Technical data subject to alterations and errors. Specifications are non-binding!) If you have further questions, we will be happy to answer them by phone.

Stav: veľmi dobrý (použitý), CTS Type: T-70/600/S Water-cooled Temperature Test Chamber Control System: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of set values - Plain text error messages - RS 232 interface - Free switching channels for customer-specific specimen actuation Technical Specifications Temperature Testing: Temperature range: -70°C to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Iijdju U Ixmopfx Ac Hok Heating: 2.5 K/min Cooling: 2.5 K/min Thermal radiation: Approx. 2500 W at +20°C Approx. 2500 W at 0°C Approx. 1800 W at -40°C Technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without radiation, and without additional equipment. Dimensions: Test volume: 600 liters Test chamber internal dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1120 mm, Depth approx. 1875 mm Operating Data: Electrical connection: 400V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerants: R404A / R23 Weight: 600 kg Safety information for buyers! The following points are carried out on all of our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and error!) For further questions, please feel free to contact us by phone.

Stav: veľmi dobrý (použitý), CTS Type: C-40/60 CTS Compact Climate Chamber, Air-Cooled Test Volume: 60 liters Temperature Range: -40 °C to +180 °C Humidity Range: Ijdpfxsu Hlb Ej Ac Hjik 10% to 98% relative humidity +10 °C to +90 °C in the temperature range +5 °C to +89.5 °C in the dew point range Dimensions (W x D x H): Interior: 400 mm x 345 mm x 425 mm Housing: 560 mm x 845 mm x 1575 mm Refrigerant: R-404A Rated Voltage: 230 V 1/N 50 Hz Power: 3.3 kW Rated Current: 13 A Important information for your safety as the buyer! The following steps are carried out on our chambers before sale: 1. Functional inspection and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Technical data and specifications are subject to change and error!) For further questions, please feel free to contact us by phone.

Stav: dobrý (použitý), CTS Type: T-70/600/S Water-Cooled Temperature Test Chamber Refrigerant: Converted to R-452A Controls: - 32-bit controller - LCD operating panel - Digital display of setpoint and actual values - Numeric entry of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for external test specimen control Technical Specifications Temperature Testing: Temperature range: -70°C to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat dissipation: Approx. 2500 W at +20°C Approx. 2500 W at 0°C Approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without irradiation, and without additional equipment. Dimensions: Test volume: 600 liters Test chamber dimensions (approx.): Height 850 mm, Width 850 mm, Depth 830 mm External dimensions (approx.): Height 1900 mm, Width 1120 mm, Depth 1875 mm Operating Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your safety as a buyer, the following information: The following items are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Isdpfsvitmdex Ac Hsik Scope of delivery: (see image) (Subject to change and errors in technical data and specifications!) If you have further questions, we will be happy to answer them for you by phone.

Stav: veľmi dobrý (použitý), CTS temperature test chamber We offer you a CTS temperature test chamber. Water-cooled CTS temperature test chamber Technical specifications: Temperature operating range Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 3.5 K/min Temperature stability (over time): ≤± 0.3 K Dimensions: Test volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm Isdpfx Aceichkvo Hoik External dimensions: Height approx. 1900 mm, Width approx. 1120 mm, Depth approx. 1875 mm Operating data: Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Power rating: 8.2 kW, 14.2 A Refrigerant: R404A / R23 Weight: 600 kg Type: T-70/600 For your safety as a buyer, please note the following information: The following procedures are carried out in advance on our offered chambers: 1. Functional testing and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Subject to change and errors in the technical data and specifications!) We are happy to answer any further questions by phone.

Stav: veľmi dobrý (použitý), CTS Climate Chamber / Environmental Test Cell Here we offer a CTS climate chamber / environmental test cell. Available from mid-January 2023! Water-cooled Height-adjustable! Footprint approx. (W x D x H): 3755 x 3470 x 2480 mm Test chamber size approx. (W x D x H): 2500 x 2720 x 2200 mm Test chamber volume: approx. 15 m³ Temperature range: -40°C to +140°C Temperature deviation: 1 K over time Average temperature change rate without thermal radiation, measured at the supply air: Heating: 2 K/min Cooling: 1 K/min from +110°C to -35°C Climatic tests: Temperature range: +10°C to +90°C Humidity range: +30% to +95% r.h. Dew point range: +5°C to 89°C Temperature deviation: 0.5 K over time Humidity deviation: ±1–±3% r.h. over time Rated voltage: 400V 3/N, PE, 50 Hz Isdsip Dp Sjpfx Ac Hjik Rated power: 53.5 kW Rated current: 92.3 A Compressor: S6J-16.2 + Chiller unit Refrigerant: R404A Weight: 5500 kg Model: CW-40/16 Condition: used Scope of supply: (see picture) (Subject to change and errors in technical data and specifications!) We are happy to answer further questions by phone.

Stav: veľmi dobrý (použitý), Tu vám ponúkame klimatickú testovaciu komoru. Voda chladená Testovací objem komory: 350 litrov Vnútorné rozmery komory: výška 750 mm, šírka 650 mm, hĺbka 720 mm Vonkajšie rozmery: výška 1800 mm, šírka 850 mm, hĺbka 1640 mm Teplotný pracovný rozsah: Teplotný rozsah: -70 °C až +180 °C Rýchlosť ochladenia: 3,0 K/min Rýchlosť ohrevu: 5,0 K/min Klimatický pracovný rozsah: Teplotný rozsah: +10 °C až +90 °C Rozsah vlhkosti: 10 % až 98 % r.v. Rosný bod: +5 °C až 89,5 °C Iodpfei Tw Uvex Ac Hsik Teplotná odchýlka: ±0,1 – ±0,3 K v čase Odchýlka vlhkosti: ±1 – ±2 % r.v. do 90 % r.v. v čase; max. ±1 – 3 % r.v. nad 90 % r.v. Elektrické pripojenie: 400V +6-10 %, 3/N, 50Hz Príkon: 13 kW Menovitý prúd: 25,5 A Chladivo: R404A / R23 Hmotnosť: 650 kg Typ: CS-70/350 Pre vašu istotu ako kupujúceho nasledujúce informácie! Na všetkých nami ponúkaných komorách sa vopred vykonávajú: 1. Kontrola funkčnosti a výmena potrebných komponentov 2. Nové naplnenie zákonne povoleným chladivom 3. Tlaková skúška s certifikátom 4. Po úspešnej kontrole sa komory testujú v skúšobnej prevádzke, sledované kalibrovanými prístrojmi. Stav: použitý Rozsah dodávky: (viď foto) (Zmeny a chyby v technických údajoch vyhradené!) Radi odpovieme na ďalšie otázky telefonicky.

Stav: veľmi dobrý (použitý), CTS Typ: C-40/350 CTS temperature test chamber, air-cooled Test chamber volume: 350 liters Internal dimensions: Height 750 mm, Width 650 mm, Depth 720 mm External dimensions: Height 1800 mm, Width 850 mm, Depth 1640 mm Design: Floor-standing unit Temperature operating range: Isdpfx Aog Sr Egjc Heik Temperature range: -40°C / +180°C Cooling rate: 4.0 K/min Heating rate: 3.0 K/min Electrical connection: 400V +6-10 %, 3/N, 50Hz Connected load: 5.5 kW Rated current: 8.3 A Refrigeration unit condenser: Air-cooled Refrigerant: R-404A Weight: 550 kg Important information for your security as a buyer! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) Should you have further questions, please contact us by phone.

Stav: veľmi dobrý (použitý), CTS Typ: TW -60/9 Water-cooled Temperature Test Chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: lowest temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling system: Water-cooled, low-noise, semi-hermetic, stepless capacity control by electronic monitoring and control system, environmentally friendly refrigerants R23 / R404A Control: 32-bit controller Iiedpfxjvb E Uqs Ac Hek LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for external specimen control Technical Performance Data: Temperature Testing: Temperature range: -60 °C to +100 °C Temperature deviation: ±0.1 to 0.5 K over time Temperature change rate (average, measured with specimen and heat radiation in supply air): Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test specimen: 420 kg solar modules tracking 100% Heat radiation: 3000 watts permanently Technical data refer to ambient temperature +25 °C, rated voltage 400 V, without test specimen, no heat input, and without additional devices. Dimensions: Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Internal test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: Power supply: 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power: 48.9 kW; Rated current: 74.9 A Protection class: IP 54 Cooling water connections: cooling water inlet/outlet R1 ¼” female thread Condensate drain (non-pressurized) R1” female thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.