Deckel Fp 3 L kúpiť použité (692)

Stav: dielensky repasované (použité), Rok výroby: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1 with 3-axis Heidenhain TNC113 active control, renowned for its particularly user-friendly operation. This later model from 1989 is equipped, among other features, with central lubrication, an electric coolant pump, and a machine lamp. The machine has undergone a thorough partial overhaul in our workshop and is therefore in excellent condition, which you are welcome to inspect on site. Delivery time: on request Machine No.: 2102-xxxx Table: fixed angle table or swiveling rotary table Travel paths: X 300 mm / Y 160 mm / Z 340 mm Quill travel: 60 mm Connected load: 1.9 kW Ijdpfx Agjpy Eldstetb Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool holder: SK40 Feed: stepless 5–500 mm/min Rapid traverse: 1200 mm/min Features and accessories: 3-axis digital readout Heidenhain TNC113 with active control, stepless feed regulation in all 3 axes, coolant system, centralised lubrication, technical documentation, leveling feet, safety features (optional) Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and, where necessary, worn parts are replaced in advance - Upon request, we will completely or partially overhaul your selected machine - Upon request, you can order additional accessories such as tools directly - Upon request, we can also mount further equipment such as safety devices directly - We are happy to take care of shipping and/or installation

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Universal milling machine Deckel FP3 with 3-axis digital readout AXESTA and 2 accessory cabinets from university use – very good condition Technical Data: - Machine No.: 0494 - 3-axis digital readout AXESTA - Swivel-tilt rotary table - Spindle speed: 40 – 2,000 rpm - Feed and rapid traverse in 3 axes - Drive power: 3 kW - Travel (X/Y/Z): 500/300/400 mm - Equipment: vertical & horizontal spindle - Vertical quill and horizontal quill extendable – SK-40 - Pull stud system S20x2 - Weight approx. 1,300 kg Accessories and Equipment: Itsdpoxxzl Njfx Agtjb - 3-axis digital readout AXESTA - Coolant system - Central lubrication - 2 accessory cabinets including: collets, horizontal and vertical tool holders, clamping tools, dividing head with 3-jaw chuck, machine vice, steady rest, faceplate, additional (small) swivel-tilt rotary table, rotary table, steady rest, vice and much more About the Machine: For sale is a Deckel FP3 universal milling machine in very good condition. All spindles move smoothly. The machine comes with 2 tool cabinets and accessories. Its previous location was a university. An oil change has been performed. Mechanically and electrically tested. The digital readout system makes operation easier and even more precise. You can inspect and test the Deckel machine under power on site.

Stav: veľmi dobrý (použitý), Rok výroby: 1978, Funkcionalita: plne funkčný, Universal milling machine Deckel FP1 with 3-axis K&C digital display, stepless feed in light grey, excellent condition Technical data: >> Year of manufacture: 1978, Machine no. 2101-0465 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Stepless feed on 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be shifted 100 mm on spindle carrier >> Vertical quill and horizontal quill - ISO 40 taper >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital display K&C, newly installed with manufacturer’s warranty and operating manual. Display unit: Set reference points and zero points, enter coordinates, mm/inch switch, absolute and incremental coordinates, circular functions, hole array, radius milling functions, etc. >> Coolant system Itodpfst Aav Isx Agtsb About the machine: A Deckel FP1 universal milling machine in very good condition is being offered. The machine has very little play in the cranks and all spindles move smoothly. All bellows are new. On this newer FP1 model, the feed is steplessly adjustable in two axes; the machine also has rapid traverse. An oil change has been performed. Mechanically and electrically tested. The new K&C digital display makes working easier and more precise. Take the opportunity to view and test this machine under power on site.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Výbava: dokumentácia / manuál, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Fully Refurbished TOP CONDITION Technical Data: >> Machine No. 53819/08 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm Iedpfxovb Ud Ue Agtetb >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill - SK40 >> Spindle brake >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant system >> Machine mounts About the Machine: Offered here is a universal milling machine Deckel FP1 in excellent condition. The Deckel shows minimal backlash and all feeds run smoothly. An oil change has been performed. The FP1 was completely overhauled by Huttelmaier in 2006 and has seen only minimal use since then. The RSF digital readout makes operation easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on-site.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Výbava: dokumentácia / manuál, Universal Milling Machine Deckel FP1 with 3-axis active digital display Heidenhain TNC 111 2008 retrofit by FA Huttelmaier Very good condition Technical Data: Iodeu Nvwvjpfx Agtetb >> Year of manufacture: 1985 Machine no. 2102-2891 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X / Y / Z: 300 / 160 / 340 mm >> Vertical milling head can be moved 100 mm on spindle carrier >> Vertical quill and horizontal quill – SK40 >> Drawbar S20x2 >> Weight: approx. 800 kg Equipment and accessories: >> 3-axis digital display Heidenhain TNC 111 >> Coolant device >> Operating manual, spare parts list About the machine: For sale is a Deckel FP1 universal milling machine, year 1985, in very good condition. The FP1 was overhauled in 2008 by Huttelmaier. The machine has minimal play in the handwheels and all spindles move easily. Even at maximum speed, the milling machine runs very smoothly. On this newer FP1 model, the feed in all three axes is infinitely variable, and there is also rapid traverse in all axes. A major advantage is the active 3-axis digital display. This Heidenhain path control allows you to input dimensions, which the machine will approach automatically. The FP1 was located in a training workshop and only used occasionally. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to see and test this gem on site under power.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Univerzálna frézka Deckel FP3 s 3-osovým digitálnym odpočtom RSF Elektronik Z-530!! Technické údaje: >> Rok výroby cca 1975, výrobné číslo 0681 >> Otočno-sklopný stôl (nový, repasovaný) >> Otáčky: 40 – 2000 ot./min >> Pracovný posuv a rýchloposuv v 3 osiach >> Výkon pohonu: 3 kW >> Pohyb v osiach X/Y/Z: 500/300/400 mm >> Výbava: vertikálne a horizontálne vreteno >> Vertikálna pinola a horizontálna pinola výsuvná – SK-40 >> Uťahovací systém M16 >> Hmotnosť cca 1300 kg Príslušenstvo a vybavenie: >> 3-osový digitálny odpočet RSF Elektronik Z-530 >> Zariadenie na prívod chladiaceho média >> Centrálne mazanie O stroji: Iodpfx Agexu E I Hetjtb Ponúka sa univerzálna frézka Deckel FP3 vo veľmi dobrom stave. Všetky vretená sa pohybujú hladko. Teleskopické kryty sú takmer všetky nové. Otočno-sklopný stôl je takmer nový. Bol vykonaný výmenný olej. Stroj je mechanicky aj elektricky odskúšaný. Digitálny odpočet umožňuje jednoduchšiu a presnejšiu prácu. Využite možnosť obhliadky a vyskúšania stroja Deckel priamo u nás pod prúdom. Stroj je okamžite k dispozícii!!!

Stav: takmer ako nový (použitý), Rok výroby: 2013, prevádzkové hodiny: 39 945 h, Funkcionalita: plne funkčný, pojazdová vzdialenosť osi X: 450 mm, zdvih osi Y: 580 mm, zdvih osi Z: 400 mm, výrobca ovládačov: Heidenhain iTNC 530, celková výška: 2 900 mm, celková dĺžka: 5 500 mm, celková šírka: 2 650 mm, otáčky vretena (min.): 28 000 ot./min, prívod chladiacej kvapaliny: 40 lišta, Year of manufacture: 2013 CNC control: Heidenhain iTNC 530 Axes Travel X-axis mm: 450 Travel Y-axis mm: 580 Travel Z-axis mm: 400 C-axis indexing degrees: 360º (0.0001) A-axis indexing degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Axis acceleration m/s²: 13 NC milling/rotary table: Number of pallets: System 3R (21 pallets type GPS 240, 30 pallets type GPS 120, and 24 pallets type ITS50) Pallet dimensions mm: Base plate for root pallet Max. workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm); and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Max. spindle speed rpm: 28,000 Spindle drive power kW: 35/25 (40%ED/cont) Cooling Coolant supply through the spindle bar: 40 Tank capacity liters: 600 Tool System Tool holder: HSK-A 63 Number of tools in magazine: 120 Tool changer type: Double gripper Equipment Electronic handwheel Chip conveyor Iedpfx Aoxv Av Regtotb Infrared probe Internal coolant supply Rotating viewing windows Rinse gun Selectable air blast through spindle center via M-function Laser tool measurement for tool length and diameter 3D quickSET Preparation for external pallet transfer Precision package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Tool holders not included in delivery Tools not included in delivery Paper band filter Machine operating hours: Power-on hours: 62,983 Spindle running time: 39,945 Total power requirement kVA: 55 Basic machine: dimensions/weight Length mm: 5,500 Width mm: 2,650 Height mm: 2,900 Weight kg: 9,500 + system 3R

Stav: dobrý (použitý), Rok výroby: 1976, Deckel FP3 nástrojová frézka s trojosým odměřováním Heidenhain, nastavitelným úhlovým stolem, SK 40 upínacím kuželem, příslušenství: různé upínací kleštiny a frézovací trny, protikus. Dobrý provozuschopný stav. Po dohodě lze předvést pod proudem. Itodpfsxu Uvtjx Agtjb

Stav: použitý, Rok výroby: 2004, x-pojezd: 3 600 mm y-pojezd: 920 mm z-pojezd: 820 mm Řídicí systém: 840D pl ShopMill Siemens Rozsah otáček hlavního vřetena: 20 – 18 000 min⁻¹ Výkon pohonu hlavního vřetena: 35 / 25 kW Max. krouticí moment: 130 Nm Upínání nástrojů: HSK-A63 Výkyvná osa B: +/- 100° Itjdpfx Ajuntmqsgteb Upínací plocha stolu: 4 200 x 900 mm Max. zatížení stolu: 4 200 kg T-drážky: 9x 18H7 x 100 Počet míst pro nástroje: 130 (120 + 10) pozic Upínání nástrojů: HSK-A63 Max. průměr nástroje: 50 mm Max. hmotnost nástroje: 6,0 kg Max. délka nástroje: 200 mm Rychloposuv (X / Y / Z): 100 / 50 / 50 m/min Maximální posuvová rychlost: 20 000 mm/min Celkový příkon: 92 kVA Hmotnost stroje: cca 17,0 t Rozměry (DxŠxV): cca 11,0 x 5,5 x 3,0 m CNC pojízdný portálový frézovací stroj DECKEL MAHO – DMF 360 linear - 5 os (NC natáčecí frézovací hlava & LEHMANN – EA 430.2A) - posuvný koník - dělený pracovní stůl - vnitřní přívod chladicí kapaliny - zásobník nástrojů pro 120 nástrojů včetně čisticí stanice - 10 přídavných míst pro nadměrné nástroje - stroj vybaven zvýšenou přesností

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Dear Sir or Madam, We hereby offer milling machines of the type Deckel FP3. Each machine is at least technically inspected in our workshop and is thus fully functional. We are very pleased to receive your inquiry! Delivery time: On request Dimensions: 2.00 x 1.60 x 1.90 m (LxWxH) Weight: approx. 1,500 kg Travel distance X-axis: 500 mm Travel distance Y-axis: 300 mm Travel distance Z-axis: 380 mm Clamping surface of table: 800 x 420 mm Spindle speed range: 40–2,000 rpm Ijdpfx Ageq H Eabstjtb Tool holder: ISO 40 Drive power: approx. 3.8 kW Axes with feed: X, Y, Z Feed rate: 10–500 mm/min Rapid traverse: approx. 1,500 mm/min Further equipment and accessories: on request Our service promise to you: - We are a certified precision engineering workshop - All machines are thoroughly checked - All lubricants and, if necessary, worn parts are replaced beforehand - Upon request, we can fully or partially overhaul your selected machine - You are free to choose the paint color of the selected machine - On request, you can order additional accessories such as tools directly - On request, we can install further accessories such as safety devices, etc. - We are happy to arrange shipping and/or installation for you

Stav: veľmi dobrý (použitý), Rok výroby: 1978, Funkcionalita: plne funkčný, Universal milling machine Deckel FP2 with 3-axis Heidenhain digital readout, stepless feed, in very good condition Technical data: >> Year of manufacture: 1978, Machine No. 2202-10163 >> Fixed angle table >> Spindle speed: 25 – 2500 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 3.0 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head adjustable on spindle carrier by 150 mm >> Extendable vertical and horizontal quill – SK40 taper >> Drawbar system S20x2 >> Weight approx. 1400 kg Isdpsxghtvefx Agtstb Accessories and features: >> 3-axis Heidenhain digital readout >> Coolant system >> Central mechanical lubrication system About the machine: Offered here is a Deckel FP2 universal milling machine in very good condition. The FP2 has very little backlash and all lead screws move smoothly. Even at maximum speeds, the milling machine runs quietly. On this newer FP2 model, the feed is steplessly adjustable in three axes, and each axis also features a rapid traverse. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. Take advantage of the opportunity to view and test the machine under power on site.

Rok výroby: 1980, Stav: pripravené na použitie (použité), Max. otáčky: 2500/min, posuv: 5–500 mm/min. Itjdpfx Aofdzzyjgtob

Rok výroby: 1990, Stav: pripravené na použitie (použité), Ovládanie: Deckel Dialog 11, so zverákom, obhliadka je možná. Iedeqi D S Uopfx Agtstb

Stav: veľmi dobrý (použitý), Rok výroby: 2002, Funkcionalita: plne funkčný, Control: 3-axis active contouring control, Heidenhain TNC 123 Spindle Speed: 40 - 2000 rpm, geometrically stepped direct gearbox with 16 speed stages for maximum torque and milling performance Isdpfx Agjv Nqu Ejtetb Feed Rate: 5 to 500 mm/min, infinitely variable Rapid Traverse: 1.2 m/min Quill: Extendable quill, vertical 60 mm, SK40, M16 drawbar thread Axes Travel: X/Y/Z 300/160/340 mm Swivel Table: 600 x 210 mm, max. load capacity 200 kg

Stav: použitý, CNC 3+2 Axis Vertical Machining Center DECKEL MAHO Type DMU 35 M CNC Control SIEMENS 810D with ShopMill Serial No. 11065353554 Year of manufacture: 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-Axis: 360° Swivel range: +105° / -15° Universal swivel rotary table: 400 x 290 mm, Centering bore 30H6 Table load: max. 100 kg Distance spindle nose – table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input increment: 0.01 mm Total power requirement: 15 kVA Ijdpfovt D D Uox Agtjtb Speed range – main spindle: 20 - 6,300 rpm Spindle drive power: 6.3 / 10 kW (100% / 40% duty cycle) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull stud: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power supply: 400 Volt, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC Control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3 axes controlled (X, Y, and Z axes) - Manual swivel rotary table, C-axis = table rotation 360°, B-axis = swivel range +105°/-15° - Direct path measuring system for all 5 axes - Electronic handwheel - Spindle drive via servo motor with toothed belt and 2-speed gearbox - Full enclosure with sliding door - Swiveling control panel - Coolant nozzles at the vertical head - Chip tray with coolant tank and coolant pump - Work area lighting - Documentation available Space requirement (L x W x H): 2000 x 2000 x 2100 mm Weight: 1750 kg Good condition

Stav: dobrý (použitý), Rok výroby: 1985, Funkcionalita: plne funkčný, číslo stroja/vozidla: 2803-2693, pojazdová vzdialenosť osi X: 400 mm, zdvih osi Y: 400 mm, zdvih osi Z: 400 mm, maximálna rýchlosť vretena: 6 300 ot./min, otáčky vretena (min.): 32 ot./min, ťah perom: 80 mm, zdvih pinoly: 80 mm, typ vstupného prúdu: trojfázový, Výbava: dokumentácia / manuál, For sale is a precise and robust Friedrich Deckel FP3NC tool milling machine, year of manufacture 1985, equipped with a Dialog 4 CNC control system. This machine is made in Germany and is suitable for tool and die making as well as for precision single-part and small series production. Technical specifications (extract): Model: FP3NC Control: Deckel Dialog 4 Year of manufacture: 1985 Serial number: 12767 Work spindle power: 2.0 / 3.0 kW, two-speed three-phase braking motor Spindle speeds: 31.5 – 6300 rpm (2 ranges, manually switchable) Tool holder: SK 40 Quill stroke (manual): 80 / 80 mm (horizontal/vertical) Travel distances: Itjdpfexlghpsx Agtsb X-axis: 400 mm Y-axis: 400 mm Z-axis: 400 mm Feed rate: 2 – 3600 mm/min Rapid traverse: 4000 mm/min Table clamping slots: 4 slots, 14H7, spacing 63 mm Total weight: approx. 1,800 kg Electrical connection: 380 V, 50/60 Hz, connected load 14.5 kVA Rated current: 22 A Control voltage: 24 V Equipment & Control: • 4-axis path control with dialog-guided input • 3D linear and circular interpolation, helical interpolation, polar coordinates • Numerous drilling and milling cycles, graphic-assisted cycle input • "Contour pocket" milling cycle for pocket machining (including irregular pockets with islands) • Sub-programming, program memory up to 512 kB • Tool corrections for up to 100 tools • Interfaces for cassette recorder, punched tape reader, floppy disk, or Winchester drive (DNC-capable) Condition & Special Features: • Machine is fully functional • Precise, rigid construction – ideal for workshops, training, or production • Operator manual and technical documentation available • Inspection possible by appointment

Stav: dobrý (použitý), Rok výroby: 1980, Deckel FP3 nástrojárska frézka s 3-osovým digitálnym odpočtom Heidenhain, pevný stôl, SK 40 upínanie vretena, príslušenstvo: rôzne upínacie klieštiny a frézovacie tŕne, oporný držiak. V dobrom prevádzkyschopnom stave. Po dohode je možná predvádzka pod prúdom. Iodpfxexdr Uxj Agtotb

Stav: pripravené na použitie (použité), K dispozícii sú dve frézky Deckel Maho. Itodpfx Agovb Ha Ustjb 1) Maho MH 800 E: - Pojezd X/Y/Z: 800 mm / 450 mm / 500 mm - Otáčky: 3 150 ot/min - Upínanie nástrojov: SK40 - Pinolový zdvih: 80 mm - Rozmery stola X/Y: 900 mm / 600 mm - Maximálne zaťaženie stola: 450 kg - Posuv X/Y/Z: 150 mm/min - Rýchloposuv X/Y/Z: 4 500 mm / 2 500 mm / 4 500 mm/min - Rozmery stroja X/Y/Z: cca 2 900 mm / 2 400 mm / 2 300 mm - Hmotnosť: cca 4 400 kg 2) Deckel Maho FP3NC: - Pojezd X/Y/Z: 500 mm / 300 mm / 400 mm - Rozmery stola X/Y: 800 mm / 420 mm - Upínanie nástrojov: SK40 - Otáčky: 2 000 ot/min - Posuv: 50 mm/min - Rýchloposuv: 1 500 mm/min - Hmotnosť: cca 1 500 kg Osobná obhliadka na mieste je možná.

Stav: použitý, číslo stroja/vozidla: 2820-0419, x-pojezd: 500 mm y-pojezd: 400 mm z-pojezd: 400 (340) mm Stolová plocha: 710 x 430 mm Rozsah otáček: 40 - 4000 ot./min Isdjh Ra Nijpfx Agtotb Rozsah posuvů: 2 - 3600 mm/min Rychloposuv: 4,0 m/min Naklápění hlavy: +/- 90° Vysunutí pinoly: 80 mm Upínání vřetena: SK 40 Řízení: Contour 3 Celkový výkon: 5,5 kW Hmotnost stroje cca: 1,9 t Prostorové nároky cca: 2 x 1,4 x 1,8 m CNC řízená univerzální frézka s řízením Dialog 4, vertikální hlava otočná +/- 90° s výsuvem pinoly 80 mm, posuvy a rychloposuvy ve všech 3 osách, hydraulické upínání nástrojů, automatické centrální mazání, chladicí zařízení, bezpečnostní nouzové zastavení, pracovní osvětlení, ochranný kryt proti třískám se sběrnou vanou na třísky, pohyblivý ovládací pult a elektronické ruční kolečko. Stroj je v dobrém stavu.

Stav: použitý, Rok výroby: 1984, x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm Table size: 700 x 470 mm Spindle speeds: 40 - 4000 rpm Feed range: 2 - 3600 mm/min Rapid traverse speed: 4.0 m/min Quill stroke: 90 mm Spindle taper: SK 40 Iedpfjcxxypsx Agtetb Control: Deckel Dialog 3 Main spindle drive power: 3 kW Total power requirement: 22 kW Machine weight approx.: 1.8 t CNC-controlled universal milling machine with Deckel Dialog 3 control, swivel vertical head with quill, horizontal spindle, feeds, rapid traverses, electronic handwheel, additional mobile control panel, hydraulic tool clamping, automatic central lubrication, machine lamp, coolant system, separate coolant tank, various tool holders, safety emergency stop. - Machine sold - - SOLD -

Stav: dobrý (použitý), Rok výroby: 1986, Frézka Deckel FP3NC Výrobce: Deckel Typ: FP3NC Rok výroby: 1986 Řídicí systém: Dialog 4 Stav: použitý Pojízdné osy: X 400 / Y 400 / Z 400 mm Posuv pinoly: 80 mm Otáčky vřetena: 40 ot./min. až 3 600 ot./min. Naklápěcí frézovací hlava. Hydraulické upínání nástrojů vertikálně/horizontálně SK40 Elektronické ruční kolečko. Ovládací panel pro výměnu nástrojů a spouštění programů. Dokumentace. Pracovní světlo. Chladicí zařízení. Kompletní krytování. NC otočný stůl T400 Hmotnost: cca 2 000 kg Hmotnost rozvaděče: 300 kg Itodow Ein Uepfx Agtob

Stav: použitý, x-pojezd 800 mm y-pojezd 400 mm z-pojezd 300 mm Itsdpeqpl Uusfx Agtjb Digitální odměřování Heidenhain Upínací plocha stolu 1000 x 520 mm Rozsah otáček 40 x 2000 ot/min Upínání vřetena SK 40 Celkový příkon 2,2 kW Hmotnost stroje cca 2,2 t Potřeba místa cca 1700 x 1600 x 1800 mm Deckel FP 2 B – šikmé lože v pojezdovém provedení Univerzální výkyvný a naklápěcí stůl Včetně různých upínačů SK40, závit pro upínání S20x2 Upínací kleštinový držák Stroj byl repasován za cca 24.000,00 €

Stav: Chybný nosič náhradných dielov (použitý), Rok výroby: 1994, číslo stroja/vozidla: 2803-2194, Universal milling machine Deckel FP3 with 3 – with Deckel Analog 4 control (defective) Technical data: - Year of manufacture: 1994 - Table diameter: 500 mm - Speed: 40 - 2000 rpm - Motor power: 3 kW - Travel paths X/Y/Z: - Weight approx. 1500 kg Equipment and accessories: - Deckel Analog4 display Grundig Dialogsteuerung 4 (defective, exact error unknown) About the machine: Iodpfxju U I Iuo Agtstb For sale is a Deckel FP3 NC universal milling machine in externally good condition. The spindles move smoothly. The rotary T-slot table is in good condition. Mechanically ready for operation; however, the control system is defective. Exact fault unfortunately unknown. Sale on behalf of customer, without any warranty, to be used as a source of spare parts.

Stav: použitý, Engine power 3 kW Total power requirement 3 kW Weight 1,400 kg O F F E R We can offer you, subject to prior sale and errors excepted, from stock and without obligation: DECKEL Universal Milling Machine with FAGOR 3-Axis Digital Readout Type FP 3 Year of construction Serial No. Table travels: longitudinal motor/manual 490 / 500 mm vertical motor/manual 370 / 380 mm transverse motor/manual 290 / 300 mm Fixed angle table 2230 420 x 800 mm Distance under spindle 90 - 470 mm Spindle taper SK 40 Iodpfx Ajv Nq Skogtstb 18 spindle speeds 40 – 2,000 rpm 18 feeds 10 – 500 mm/min Rapid traverse 1,500 mm/min Spindle drive 3 kW Total drive 3 kW - 380 V - 50 Hz Weight 1,400 kg Accessories / Special Equipment • FAGOR 3-Axis Digital Readout V 300 (glass scales) with extended functions such as bolt-hole circle, absolute measurement, mm/inch switch, etc. • Movable DECKEL universal vertical milling head, swivel range +/- 90° • Original DECKEL tool cabinet with extensive accessories such as various tool holders, collet chuck with approx. 20 collets, long arbor, various distance rings, driver, clamping devices, operating tools, etc. • DECKEL large fixed angle table, 420 x 800 mm, mounted • DECKEL universal dividing head with direct and indirect division, various index plates • Attach-able manual DECKEL universal rotary table Ø 380 mm with direct and indirect division, various index plates • Coolant system, chip tray, central lubrication, separate control cabinet, operating manuals Condition : Very well maintained! Ideal machine for training workshops or small batch production!! Please click here for a video of the machine: FP3/4 Delivery : ex stock, immediately available, FCA Metzingen Payment : strictly net – upon receipt of invoice We always have a large selection of conventional and CNC milling machines in stock. Please ask us!

Stav: použitý, Rok výroby: 1985, 1 kus univerzálnej frézky, značka Deckel typ FP 4 MA, sériové číslo 2204.1463, rok výroby cca 1985, riadenie Deckel Contour II, frézovací stôl cca 800x500 mm, 7 T-drážok, cca 25 držiakov nástrojov. Itodeyaxl Dopfx Agtjb