Emco Bs 3 kúpiť použité (139)

Stav: takmer ako nový (použitý), Rok výroby: 2008, Funkcionalita: plne funkčný, Výbava: dokumentácia / manuál, Tool Milling Machine Emco C40 Linear with Digital Readout, Path Control, Very Good CONDITION, CE-Compliant!! Technical Data: >> Year of manufacture: 2008 Machine No.: BA1DW2501 >> Milling Table Clamping Surface: 800 x 400 mm T-slots: 8 Slot width: 14 H 8 Slot spacing: 50 mm Maximum load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed: 10–2000 mm/min Rapid traverse X: 5000 mm/min >> Travel paths X/Y/Z: 450/350/400 mm >> Vertical and horizontal quill – SK40 >> Hydraulic drawbar system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Dimensions approx.: 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts plans, operating manual >> Swivelling enclosure >> Coolant system >> Machine lamp Hfsdewxxdfopfx Aamod >> Dividing head with tailstock >> Steady rest >> Röhm vice About the machine: Offered is a tool milling machine Emco C40 Linear with path control. This universal milling machine is in nearly new condition. It comes from a state-owned facility where it was used only a little. Very user-friendly control unit. In addition, the machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very easy by swivelling away the vertical head. The Emco has been mechanically and electrically inspected by us. Take the opportunity to view and test the machine under power on-site.

Stav: takmer ako nový (použitý), Rok výroby: 2008, Funkcionalita: plne funkčný, Universal tool milling machine Emco C40 Linear with digital display and path control, in very good condition, CE-compliant!! Technical data: >> Year of manufacture: 2008 Machine no.: BA1DW2503 >> Milling table clamping surface: 800 x 400 mm Clamping slots: 8 Slot width: 14 H 8 Slot spacing: 50 mm Max. load: 300 kg >> Spindle speeds steplessly adjustable: 10-5000 rpm >> Feed rate steplessly adjustable: 10-2000 mm/min Rapid traverse (X): 5000 mm/min >> Travel range X/Y/Z: 450/350/400 mm >> Vertical and horizontal quills - SK40 >> Hydraulic clamping system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Dimensions (approx.): 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating instructions >> Hinged cabin >> Coolant system Hodpfx Ajwxxd Ejamjfd >> Machine lamp >> Indexing head with tailstock >> Steady rest >> Röhm machine vice About the machine: For sale is a tool milling machine Emco C40 Linear with path control. This universal milling machine is in almost like-new condition. It comes from a state-owned facility where it was only used rarely. The control system is very user-friendly. The machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operations is very straightforward by simply swinging away the vertical head. The Emco has been mechanically and electrically inspected by us. Take advantage of the opportunity to view and test the machine under power at our location.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Emcomat 17D lead and feed screw lathe with 3-axis digital readout by K&C, like new from training workshop, excellent condition!!! Technical Data: >> Year of manufacture approx. 2000, Machine No. D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 ranges, infinitely variable from 35–3000 rpm >> Quill travel: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev Hodjwvuf Tspfx Aamsfd >> Required floor space (L x D x H): approx. 1.6 x 0.9 x 1.3 m >> Weight: approx. 730 kg Accessories and equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer's warranty inc. user manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of displayed value, reference mark, tool programming for 200 tools, taper calculation, radius/diameter mode, rapid zeroing, counting direction reversal >> 1 new 160 mm 3-jaw chuck, 2 sets of jaws >> Multifix B toolpost with 2 holders >> Chip guard/back panel >> Coolant system About the machine: Offered here is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is, of course, fully functional. The bed ways are in very good condition. This Emco is equipped with a brand new K&C 3-axis digital readout and a new 3-jaw chuck. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stav: veľmi dobrý (použitý), Rok výroby: 1995, Funkcionalita: plne funkčný, Emcomat Emco EM20D lead and feed screw lathe, year of manufacture 1995, excellent condition, CE compliant! Technical specifications: >> Year of manufacture: 1995 >> Centre height: 200 mm >> Swing diameter over bed: 400 mm >> Swing diameter over cross slide: 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 speed ranges, infinitely variable from 35–3000 rpm >> Quill stroke: 120 mm >> Tailstock: Morse taper 3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Space requirement / dimensions approx.: Length 1.900 x Depth 0.9 x Height 1.3 meters >> Weight approx. 850 kg Accessories and features: Hfsdpfewag Stex Aamsd >> 3-axis position indicator >> 1 pcs. 3-jaw chuck with 1 set of jaws >> Tool holder with 3 pcs. tool pockets >> Chip guard >> Coolant system >> Bed stop About the machine: For sale is an Emcomat 20D lead and feed screw lathe, year 1995, in barely used condition. The machine is, of course, fully functional. All carriage movements are exceptionally smooth and even. The bedways are in excellent condition. Take the opportunity to inspect this machine under power at our facility and see the condition for yourself.

Stav: použitý, Rok výroby: 2003, Ovládanie 840D-PCU 50 V1 Kusov na sklade: 3 Chladiaca kvapalina: áno Dopravník triesok: áno, kW Hjdpfx Ajqn A Rrjamjfd Menovitý prúd generátora: 110 A Pripojený príkon: 56 kW

Stav: dobrý (použitý), Rok výroby: 2006, Stroj bol používaný iba na plast. Technické údaje sú uvedené v priloženom PDF dokumente. Diely ukazované ručne NIE sú súčasťou dodávky. Hfsdpfx Aasu Ibihemed

Stav: veľmi dobrý (použitý), Rok výroby: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-axis CNC turning center with automatic tool changer, Y-axis and B-axis for complete machining of turning-milling parts; integrated spindle motors (ISM) on main and counter spindle with thermal compensation system (liquid-cooled). Drive power: Main spindle – 29 kW Counter spindle – 22 kW Speed range: Main spindle: 0–5000 rpm Counter spindle: 0–7000 rpm Spindle interface (DIN 55026): Main spindle: KK 6 (bore 65 mm) Counter spindle: KK 6 Y-axis travel range: +/- 50 mm The Y-axis is designed so that the cutting forces are distributed across two axes, ensuring extremely high rigidity for all machining operations. B-PowerMill: For machining inclined surfaces and drilling operations, a motor-driven milling spindle with 24-position tool magazine is integrated in the upper slide system. The swiveling range of 210° is infinitely adjustable and can be interpolated. Preloaded roller guideways on all linear axes; digital drive system; integrated spindle encoder; state-of-the-art control technology SINUMERIK 840D, includes: * Hollow clamping cylinder with draw tube * Parts ejector and through-spindle flushing on the counter spindle * 12-station tool turret VDI 30 radial with directional logic for up to 12 driven tool stations Swivel speed adjustable via feed override switch. Performance data: Max. 6.7 kW at 2650 rpm Constant torque 25 Nm Speed range 0–5000 rpm - C-axis for main and counter spindle - TRANSMIT software for easy C-axis programming Hfodpfx Aaexz Ab Romsd * Parts catcher for finished components * Sinumerik 840D * Chip conveyor with programmable ejection height of 1200 mm (type "hinged belt") * Integrated coolant system in the chip conveyor 1x high-pressure pump with 14 bar 1x high-pressure pump with 14 bar incl. 20 µm fine filter 2x flushing pumps with 3.7 bar * Control cabinet air conditioning unit * Electrostatic oil mist separator * Hydraulic unit * Machine light * Interface for foot switch * Documentation Includes: - Manual handwheel - PC keyboard - Network preparation - Tool monitoring - Safety window - Cleaning air gun - Signal lamp Year of manufacture: 2008 Machine No.: R7AW0401

Stav: dobrý (použitý), Rok výroby: 1996, Frézka, univerzálna frézka, nástrojová frézka, vŕtaco-frézovací stroj Hodpfx Aoxvraxoamofd - Výrobca: EMCO, frézka s digitálnym ukazovateľom a hydraulickým upínaním - Upínací stôl: 800 x 400 mm - Upínací stôl: otočný/sklopný/nakloniteľný - Posuv X/Y/Z: 600/400/400 mm - Upínanie vretena: SK40 s hydraulickým upínaním - Príslušenstvo: vrátane 9 kusov držiakov na náradie – viď foto - Otáčky: od 63 do 3150 ot./min - Posuv X/Y: 16-800 mm/min - Posuv Z: 8-400 mm/min - Zdvih pinoly: 100 mm - Rýchloposuv X/Y: 2000 mm/min - Rýchloposuv Z: 1000 mm/min - Chladiace zariadenie: áno - Rozmery: 1740/1670/V1940 mm - Hmotnosť: 2200 kg

Stav: takmer ako nový (použitý), Rok výroby: 2024, Funkcionalita: plne funkčný, pojazdová vzdialenosť osi X: 4 200 mm, zdvih osi Y: 1 000 mm, zdvih osi Z: 950 mm, rýchloposuv os X: 60 m/min, rýchly posuv osi Y: 50 m/min, rýchloposuv osi Z: 50 m/min, maximálna rýchlosť vretena: 15 000 ot./min, MMV 4200 MOVING COLUMN MACHINING CENTER FOR 5-AXIS SIMULTANEOUS MACHINING WITH HEIDENHAIN TNC 640 5-axis simultaneous moving column machining center with integrated water-cooled motor spindle. Control: HEIDENHAIN TNC 640 - Conversational programming - USB and Ethernet interface - 24" TFT color monitor - 3D visualization, programming graphics Spindle: Motor spindle, water-cooled Spindle power: 46 kW Spindle speed: 50 - 15,000 rpm Spindle torque: 170 Nm Tool holder: ISO 40 DIN 69871 Pull stud: ISO 7388/2 Type B (not included in the basic version) Travel ranges: X = 4200 mm, Y = 1000 mm, Z = 950 mm Distance spindle nose – table: 0–950 mm Rapid traverse (X–Y–Z): 60/50/50 m/min B/C axis: 50/100 rpm Fixed table: Cast table with T-slots Number – width – spacing: 7 – 18 – 125 mm (Central reference slot 18H8) Clamping area: 4400 x 1050 mm Maximum table load: 6,000 kg (evenly distributed) Swivel head (B axis): Hodpfjychf Ssx Aamsfd Torque motor, swivel range +120°/-120° Rotary table (C axis): Torque motor Table diameter: 900 mm Maximum rotary table load: 2,000 kg Rotary table accuracy: 0.05 mm +/- 0.02 mm (lowered under the fixed table) Stationary tool changer: Drum magazine on the left side of the machine with 40 tools Tool change time (chip-to-chip, VDI 2852): approx. 15 s Coolant pump: Pressure: 6 bar, delivery volume: 40 l/min (nominal at the pump) Work area lighting: 4 LED lamps Standard equipment: - Glass scales in X/Y/Z axes - Centralized grease lubrication - Handwheel - Alarm lamp - Work area lighting - Electrical cabinet air conditioning unit

Stav: veľmi dobrý (použitý), Rok výroby: 2000, EMCO VMC 600, Siemens Rok výroby: 2000 Hedpexxakwsfx Aamsfd

Stav: použitý, Rok výroby: 2007, Technické údaje: Hsdsx Apd Uopfx Aamofd Priemer sústruženia nad lôžkom: 340 mm Priemer sústruženia nad suportom: 190 mm Dĺžka sústruženia: 700 mm Otáčky vretena: 40 - 3000 ot./min Vretenový otvor: 50 mm

Stav: použitý, Rok výroby: 2013, Technické detaily: Priemer tyče: 65 mm Dĺžka sústruženia: 644 mm Priemer sústruženia nad ložom: 600 mm Priemer sústruženia nad suportom: 430 mm y-os: 100 (+-50) mm Otáčky: 2x 5 000 min⁻¹ Indexácia na: 2x C-os, 0,001° Odobratie vretena: áno Revolverová hlava (x-počet): 2x 12 VDI 30 pozícií Poháňané nástrojové stanice: 2x 12 pozícií Otáčky: 2x 4 000 min⁻¹ Hfodophuwqepfx Aamjd Ovládanie: FANUC 18 iTB Celková potreba výkonu: 30 kVA Hmotnosť stroja cca: 8 t Rozmery cca: 3,5 x 2,5 x 2,3 m CNC sústružnícke centrum s protivretenom a y-osou (horný suport), vodou chladené vretená, vysokotlaková chladiaca jednotka 2 x 14 bar, skľučovadlo upínacieho tŕňa na hlavnom a protivretene, zásobník tyčí ENTL 10-65, dopravník triesok, veľké množstvo príslušenstva, cca 54 500 hodín zapnutia, cca 30 500 automatických hodín, cca 14 000 hodín posuvu

Stav: generálne opravený (použitý), Rok výroby: 2005, Funkcionalita: plne funkčný, dĺžka sústruženia: 1 500 mm, sústružnícky priemer: 520 mm, maximálna rýchlosť vretena: 3 200 ot./min, pojazdová vzdialenosť osi X: 280 mm, zdvih osi Z: 1 055 mm, hmotnosť obrobku (max.): 1 200 kg, TECHNICAL DETAILS Swing diameter over bed: 700 mm Max. turning diameter: 520 mm Spindle distance: 1,500 mm Travel X1: 280 mm Travel Z1: 1,055 mm Travel Z2: 1,090 mm Control system: Siemens Sinumerik 840D Main spindle Spindle nose: DIN 55026 A2-8 Drawbar passage: 95 mm Front bearing inner diameter: 160 mm Rear bearing inner diameter: 150 mm Clamping cylinder diameter: 315 mm Speed range: 750–3,200 rpm Power (S1/S6 40%): 37/54 kW Max. torque (S1/S6 40%): 470/687 Nm Max. workpiece weight in chuck: 400 kg Centre of gravity distance from chuck: 175 mm Max. workpiece weight between chuck and tailstock: 1,200 kg Counter spindle Spindle nose: DIN 55026 A2-8 Drawbar passage: 95 mm Front bearing inner diameter: 160 mm Rear bearing inner diameter: 150 mm Clamping cylinder diameter: 315 mm Speed range: 500–3,200 rpm Power (S1/S6 40%): 17/25 kW Max. torque (S1/S6 40%): 324/478 Nm Tailstock Travel: 1,050 mm Min./Max. distance between spindle and tailstock: 320–1,370 mm Min./Max. feed force: 50–2,000 daN Quill taper: MK 5 Feeds Rapid traverse X1-X2-Z1-Z2 and counter spindle: 30 m/min Ball screw X1-X2, pitch: 40 x 20 mm Ball screw Z1-Z2, pitch: 50 x 20 mm Ball screw counter spindle, pitch: 50 x 20 mm Feed force X1-X2: 1,640 daN Feed force Z1-Z2: 1,640 daN Feed force counter spindle: 1,640 daN Hfsdpfx Aaov Hqntomsd General overhaul and maintenance - Replacement of X-axis ballscrew (upper turret): 2011 - Replacement of clamping cylinder (spindle no. 1): approx. 2018 - Replacement of both spindle bearings: 2011 - Overhaul of both turrets: ongoing EQUIPMENT - Counter spindle - 2 turrets with driven tools - Y-axis of upper turret: starting at 50 mm - Driven tools: 2 straight + 2 angled - Holders: 2 in the hole + 2 on the surface - Jaws: 2x hard base jaws - Complete documentation for the machine - Spare turret head (after complete overhaul)

Stav: nový, Rok výroby: 2024, EMCO Concept MILL 105 Hfsdstz S Rhepfx Aamed PC-controlled CNC bench-top machining center Machine complete with full enclosure, safety equipment according to CE standards, 10-position tool turret, central lubrication, machine light, electrical and mechanical provision for automation, tool set for operation. Year of manufacture: 2024

Stav: veľmi dobrý (použitý), Rok výroby: 2018, EMCO Concept MILL 55 Year: 2018 With tool changer PC-controlled 3-axis universal milling machine designed for basic CNC training with various industrial controls. Fully enclosed machine housing, safety features in compliance with CE standards, infinitely variable main drive, automatic reference point positioning, machine lamp, electrical and mechanical interface for automation, PC interface card, PC-to-machine connection cable, data carrier with machine data, operator tool set, user manual with spare parts list. Interchangeable Control System The concept of interchangeable control, unique to the Concept series, allows all Concept machines to be equipped with various CNC controls. This enables the operator to train on all industry-standard CNC controllers using a single machine. Currently, up to eight different controllers can be learned. The result: CNC operators remain highly flexible—a key advantage for both the skilled workforce and the company. Working Area • X-axis travel: 190 mm • Y-axis travel: 140 mm • Z-axis travel: 260 mm • Min. spindle nose-to-table distance: 77 mm • Max. spindle nose-to-table distance: 337 mm Milling Table • Table dimensions (L x W): 420 x 125 mm • T-slots (number x width x spacing): 2 x 11 x 90 mm • Max. table load: 10 kg Spindle Drive • Speed range: 150 – 3,500 rpm • Power, three-phase asynchronous motor: 0.75 kW • Spindle torque: 3.7 Nm Axes Hodpfx Ajwkpzloamofd • Feed rate: 0 – 2 m/min • Max. feed force X/Y: 800 N • Max. feed force Z: 1,000 N • Average position deviation to VDI 3441 in X/Y: 0.008 mm • Average position deviation to VDI 3441 in Z: 0.008 mm Tool System • Number of tool stations: 8 • Tool selection with directional logic • Max. tool diameter: 40 mm • Max. tool weight: 1 kg Scope of Delivery EMCO Concept Mill 55 with tool changer Cables Easy2Operate WinNC Sinumerik Operate Base stand Levelling elements I/O extension Pneumatic extension Automatic door system Pneumatic vice Robotic interface DNC interface W-holder package

Stav: nový, Rok výroby: 2024, EMCO Concept TURN 105 PC-controlled CNC benchtop lathe Machine complete with full enclosure, Hfjdpfx Aaetz S I Hsmsd safety devices in accordance with CE, 8-position tool turret, manual tailstock, centralized lubrication, machine light, electrical and mechanical preparation for automation, operator tool set included. Year of manufacture: 2024

Stav: veľmi dobrý (použitý), Rok výroby: 2018, HT 45 SM2Y / SIEMENS - with driven tools + Y-axis CNC turning machine for complete machining of turning-milling parts with 2 spindles, 2 tool systems, 6 linear axes and 2 rotary axes, integrated spindle motors on main and sub-spindle (water-cooled), preloaded roller guides. Drive power: Main spindle - 15 kW Sub-spindle - 15 kW Speed range: Main spindle 0 - 7000 rpm Sub-spindle 0 - 7000 rpm Spindle connection (DIN 55026): Main spindle: KK 5 (max. bar capacity ø 45mm) Sub-spindle: KK 5 Y-axis: • Travel: +40/-30mm • Rapid traverse speed: 15m/min Includes: • Hollow clamping cylinder on the main spindle • Draw tube for main and sub-spindle • Mechanical spindle brake (main/sub-spindle) • Parts ejector and flushing through the sub-spindle • Sinumerik 840D-sl / OPERATE control o SHOPTURN conversational programming o USB interface o Network drive / Ethernet o 15" TFT colour monitor o 3D simulation o and more • 2x 12-station tool turrets VDI 25, radial with directional logic for up to 2x 12 driven tool stations! Swivel speed adjustable via feed switch! Performance data: o Max. 4kW at 2080 rpm o Constant torque 16 Nm o Speed range 0-6000 rpm o C-axis for main and sub-spindle o TRANSMIT software for simple C-axis programming • Chip conveyor with an eject height of 1100mm, programmable (type "hinged belt") • Coolant system integrated into chip conveyor 2 pcs. high pressure pumps with 14 bar 2 pcs. flushing pumps with 3.7 bar • Hydraulic unit • Machine lamp • Documentation including: DE6400 1 pc. Control language German S3Z580 1 pc. 22” multitouch operating unit HT45 Hodpfx Aewvlvvsamefd X3Z160 1 pc. Tool monitoring Siem. 840Dsl X3Z690 1 pc. SHOPTURN/MILL extension package 840DSL/828D X3Z710 1 pc. 4-AXIS TURNING/BALANCE 840DSL/828 S3Z20S 1 pc. Glass scale X1 SIEMENS S3Z21S 1 pc. Glass scale Y1 SIEMENS S3Z23S 1 pc. Glass scale X2 SIEMENS X1Z140 1 pc. Loader interface A8, S2, S3, S4, S6, R2, R6, R9PM S30593 1 pc. Additional cost for flat chip conveyor S3Z610 1 pc. Tool measuring system HT45 S4Z140 1 pc. Coolant gun S3Z160 1 pc. Cooling unit HT45 S3Z010 1 pc. Oil mist separator MT45/HT45/E45 S3Y300 1 pc. Band filter 600l + conveyor HT45 S30605 1 pc. Preparation HT45 unloading sub-spindle S30595 1 pc. Robot interface HT45 S30596 1 pc. Interface to measuring station S30597 1 pc. Interface to unloading device S30598 1 pc. Wireless probe Renishaw S30599 1 pc. Tool setup by Emco 990717 1 pc. Loading system IRCO ILS-RBL-8008 990718 1 pc. Unloading system IRCO ILS-REX-8008 ..... Year: 2018 Machine no.: S3A182001

Stav: použitý, Rok výroby: 2018, Prevádzkové hodiny: 600 h Technické údaje: Posuv v osiach X/Y/Z: 450 / 350 / 400 mm Vzdialenosť čelo vretena – stôl: 230 - 630 mm (vodorovné frézovacie vreteno) Hfodpfoxu I Txex Aamed Rýchloposuv X/Y/Z: 5000 / 5000 / 5000 mm/min Pracovný posuv X/Y/Z: 10 - 2000 mm/min plynulo regulovateľný Max. posuvová sila X/Y/Z: 10 / 10 / 15 kN Upínacia plocha: 800 x 400 mm (pevný uhlový stôl) Max. zaťaženie stola: 30 kg (pevný uhlový stôl) Vertikálna frézovacia hlava: Rozsah otáčok: 10 - 5000 ot./min Výkon: 10 kW Rozmery (DxŠxV), cca: 1980 x 2030 x 1990 mm Hmotnosť, cca: 2270 kg Vybavenie: - Otočný ovládací panel - Digitálne zobrazenie na báze Sinumerik 828D - Pravý/ľavý chod hlavného vretena - Lineárne vedenia - Štvornásobne uložené frézovacie vreteno radiálne/axiálne - Hlavný motor s brzdou vretena - CE

Stav: pripravené na použitie (použité), Rok výroby: 2007, prevádzkové hodiny: 11 261 h, Funkcionalita: plne funkčný, číslo stroja/vozidla: M-077.084.07, pohotovostná hmotnosť: 4 800 kg, Výbava: dopravník triesok, DETAILY STROJA Hmotnosť: 4 800 kg Prevádzkové hodiny Spindlové hodiny: 11 261 h Hodiny zapnutia riadenia: 125 668 h Hodpfx Asxpvwzjamjfd VYBAVENIE Dopravný pás (FAMUP 405-1498-1, 352 kg)

Stav: dobrý (použitý), Rok výroby: 2003, Interné číslo položky: 25045 Univerzálna frézka Emco FB4 Rok výroby: 2003 + Príslušenstvo Hfsdpfew Hrycjx Aamed (hydraulický strojový zverák Allmatic 110 / 12x držiak SK40 v regáli) + Elektricky skontrolované do 11/2028 (podľa kontrolnej nálepky) + 3-osí digitálny odpočet Heidenhain ND780 Pojazdy: X 450 / Y 300 / Z 350 mm Pinolový zdvih: 100 mm Hlavný pohon: 3,2 kW Otáčkový rozsah: 63 – 3150 ot./min. Frézovací stôl: 800 x 400 mm Automatické centrálne mazanie Rozmery (DxŠxV): 200 x 200 x 200 cm Hmotnosť: 2100 kg

Stav: dobrý (použitý), Rok výroby: 2000, High-performance CNC vertical machining center with SIEMENS 840 D, dual pallet changer, internal coolant supply, linear guides, and 30-position tool changer Table size 2 x 1000 x 450 mm Tool holder DIN 69871 ISO 40 Travel (X-axis) 1100 mm (Y-axis) 500 mm (Z-axis) 640 mm Spindle speed range 50 – 10,000 rpm Table load capacity 600 kg Feed range, X/Y/Z, stepless up to 10,000 mm/min Rapid traverse on all axes 30 m/min Drive power 18.5 kW Machine dimensions L x W x H approx. 3605 x 3041 x 3220 mm Weight approx. 6,700 kg Equipment / Special features: • CNC path control SIEMENS 840 D • Dual pallet changer • 30-position tool changer • Fully enclosed safety cabin with electrically secured doors • High spindle speed up to 10,000 rpm and 18.5 kW drive power • Linear guides with double roller blocks for uniform absorption of high torques in all directions • Ball screw drives on all three axes Hfedpfxjd I R E Ns Aamsd • The entire machine bed is made of Meehanite cast iron, ensuring precision, rigidity, and vibration damping • Tool holder according to DIN 69871, ISO 40 • Hinged belt chip conveyor with integrated coolant system • 4th axis prepared • CE compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Stav: pripravené na použitie (použité), Rok výroby: 2008, Funkcionalita: plne funkčný, číslo stroja/vozidla: S6AW11S1, sústružnícky priemer nad priečnym suportom: 540 mm, dĺžka sústruženia: 550 mm, sústružnícky priemer: 600 mm, maximálna rýchlosť vretena: 5 000 ot./min, pojazdová vzdialenosť osi X: 260 mm, zdvih osi Z: 800 mm, Stroj s C-osou, E-osou, Y-osou, W-osou a poháňanými nástrojmi na všetkých pozíciách TECHNICKÉ ÚDAJE Točný priemer nad lôžkom: 600 mm Točný priemer nad suportom: 540 mm Dĺžka obrábania: 550 mm Pozdĺžny posuv (Z-os): 800 mm Priečny posuv (X-os): 260 mm Ovládanie: Fanuc 18i-TB Vrtanie vretena: 73 mm Priemer tyče: 65 mm Otáčky: 0 – 5 000 ot./min Krútiaci moment na vretene: max. 250 Nm Vzdialenosť vreteno – protivreteno: 1 050 mm Protivreteno: A2-6, posuv: 800 mm, vreteno: 105 mm, krútiaci moment: 250 Nm Rýchloposuv v osiach X/Y/Z: X/Z: 30 m/min / Y: 12 m/min Rýchloposuv C-os: 1 000 ot./min ÚDAJE O STROJI Prevádzkový tlak: 6 bar Celkový príkon: 40 kVA Hmotnosť stroja: cca 5,7 t Rozmery stroja DxŠxV: 2,2 x 3,4 x 2,4 m Transportné rozmery stroja: cca 3,3 x 1,9 x 2,2 m Elektrické prevedenie – napätie/frekvencia: 3 x 400 V / 50 – 60 Hz Rozmery dopravníka triesok DxŠxV: cca 2,9 x 0,6 x 0,55 m (0,38 t) Rozmery vaničky na triesky DxŠxV: cca 1,6 x 1,3 x 0,25 m (0,2 t) VYBAVENIE - Riadiaca rozvodná skriňa s chladičkou značky Rittal - Pásový dopravník triesok - Zberná vanička na triesky Hfjdew T Sq Tjpfx Aamod - Pištoľ na stlačený vzduch - Bez skľučovadla na predaj

Rok výroby: 2005, stav: veľmi dobrý (použitý),

Stav: nový, Rok výroby: 2023, Funkcionalita: plne funkčný, NOVÁ LINKA (NEPOUŽITÉ – V ORIGINÁLNÍM BALENÍ) / PŘIPRAVENÁ K PROVOZU / IHNED K DODÁNÍ HT 45 SM2 / SIEMENS – s poháněnými nástroji CNC soustruh pro kompletní obrábění soustružnicko-frézovaných dílů se 2 vřeteny, 2 nástrojovými systémy, 5 lineárními osami a 2 rotačními osami, integrované vřetenové motory na hlavním a vedlejším vřetenu (vodou chlazené), předepnutá valivá vedení. Výkon pohonu: hlavní vřeteno – 15 kW, vedlejší vřeteno – 15 kW Rozsah otáček: hlavní vřeteno 0–7000 ot/min, vedlejší vřeteno 0–7000 ot/min Upínací rozhraní vřetene (DIN 55026): Hlavní vřeteno: KK 5 (max. průchod tyčí ø 45 mm) Vedlejší vřeteno: KK 5 Obsahuje: • Dutý upínací válec na hlavním vřetenu • Trhací trubka pro hlavní a vedlejší vřeteno • Mechanická brzda vřetene (hlavní/vedlejší vřeteno) • Výtlačník obrobků a proplach přes vedlejší vřeteno • Ovládání Sinumerik 840D-sl / OPERATE o emcoNNECT / aplikace s uživatelským rozhraním o 22" multi-touch displej o IPC s 240 GB o SHOPTURN dialogové programování o USB rozhraní o síťová jednotka / Ethernet o 3D simulace o a mnoho dalšího • 2x 12polohová nástrojová hlava VDI 25 radiální s logikou směru, pro až 2x 12 poháněných nástrojových stanic Rychlost natáčení nastavitelná pomocí posuvového spínače! Hfjdpelxqf Nefx Aamod Výkonové parametry: – Max. 4 kW při 2080 ot/min – Konstantní točivý moment 16 Nm – Rozsah otáček 0–6000 ot/min – C osa pro hlavní a vedlejší vřeteno – TRANSMIT software pro jednoduché programování C-osy • Dopravník třísek s programovatelnou výškou výsypky 1100 mm (typ "článkový pás") • Zařízení na chladicí kapalinu integrované v dopravníku třísek 2 ks vysokotlakých čerpadel s tlakem 14 bar 2 ks oplachovacích čerpadel s tlakem 3,7 bar Vzduchová pistole se spirálovou hadicí • LED osvětlení pracovního prostoru stroje • Hydraulická jednotka • Dokumentace

Stav: pripravené na použitie (použité), Rok výroby: 2007, prevádzkové hodiny: 6 615 h, Funkcionalita: plne funkčný, číslo stroja/vozidla: R2EV3403, dĺžka sústruženia: 310 mm, sústružnícky priemer: 220 mm, maximálna rýchlosť vretena: 6 300 ot./min, sústružnícky priemer nad lôžkom suportu: 430 mm, prechod tyče: 45 mm, TECHNICAL DETAILS Working Range Swing diameter over bed: 430 mm Max. turning diameter: 220 mm Max. turning length: 310 mm Max. bar capacity: 45 mm Distance between centers: 687 mm Cross Slide Travel X-axis travel: 160 mm Z-axis travel: 310 mm Main Spindle Spindle mount according to DIN: 55026 KK5 Front spindle bearing diameter: 80 mm Hodpfx Aoxvrv Teamefd Hollow chuck cylinder max. through-hole: 45 mm Max. chuck size: 160 mm Speed range (infinitely variable): 0–6,300 rpm Max. torque: 78 Nm C-Axis (Rotary Axis) Resolution: 0.001° Spindle indexing (disc brake, with driven tools): 0.01° Feed Drives Feed force X: 4 N Feed force Z: 6 N Rapid traverse speed X: 20 m/min Rapid traverse speed Z: 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Positioning scatter P₉ as per VDI 3441 in X/Z: 3 / 3 µm Tool System Tool holders as per DIN: 69880 VDI30 Tool cross-section for square tools: 20 x 20 mm Shank diameter for boring bars: Ø32 mm Number of tool stations / driven (option): 12 / 6 Turret indexing time: 0.14 s MACHINE DETAILS Total power requirement: 17 kW Dimensions & Weight Space requirement: 2.25 x 1.63 x 1.94 m Machine weight: 3.3 t Operating hours: 6,615 h EQUIPMENT Integrated holding brake for driven tools Disc turret with directional logic AC motors in X and Z axis