Fronius kúpiť použité (45)

Stav: ako nová (výstavný stroj), Fronius TPS 3200 ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Equipped as standard with Flow Control, Thermocontrol, and coolant filter. The unit shuts off if the water cooling fails or becomes too hot, protecting the hose assembly. These features typically cost around €400 extra at Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our opinion, the most sensible wire feed case – the wire is safely stored in the closed housing. ➤ Fronius Intermediate Hose Package, long – Each unit comes with a 5-meter connection hose between the power source and wire feed case for increased flexibility and better handling. Simply take the wire feed case to hard-to-reach places! The connection hose is neatly stored on a hook on the side of the unit. (Hooks are manufactured by us) ➤ Fronius Large Transport Cart – Probably the best cart with gas cylinder holder on the market. ➤ Binzel Torch Package – With Up/Down amperage regulation on the torch. ➤ Ground cable 3–4m Dobkh Hjum Rw Dsufpokk ➤ Messer pressure regulator, new ➤ Basket reel adapter for large wire spools, new With this machine, nearly all materials can be welded, including aluminium, steel, and V2A. It features slow wire feed programs and is also suitable for MIG brazing (CuSi), which is frequently used in the bodywork sector. Kedpfx Aswbilxob Ssll Further options available at extra charge For example, Fronius Job Master torch package (display on torch) + EUR 500.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection possible in Vienna 1230, Austria! ✔ Insured shipping on pallet available with no problem! ✔ We are also available via Whatsapp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the devices? To explain: we purchase nearly-new used units, disassemble them, thoroughly check everything, replace wear parts if necessary, and only after a successful test weld do we release them for sale. "All" machines are clean and have no burn marks on the displays or multiple burn marks or dents all over! When buying from us, you get an item that also looks ⭐attractive and not beaten up! ►►►Do we receive an invoice when purchasing from you? Yes, you receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice for intra-community deliveries within the EU if the requirements are met. ►►►What payment options are available? Advance payment or cash upon personal collection ►►►Why buy from us? We are professionals specialising in this Fronius welding machine series and always have 60–80 units in stock – only Fronius, no other brands! We are experts with these devices and never sell anything we are not familiar with.

Stav: takmer ako nový (použitý), Rok výroby: 2023, FRONIUS Selectiva Charger 4.0 3KW 4045 Profi HF 2-48V-45A Kljdpfsuiu U Rex Ab Ssl Fully functional Year of manufacture: 2023 As new condition Suitable for a wide range of industrial and commercial applications: ➤ Forklifts ➤ Industrial trucks ➤ Electric vehicles Fast and efficient charging time, including overload protection for batteries, with a power output of 3 kW. FRONIUS NEW PRICE: 2,149 EUR FULLY FUNCTIONAL Insured shipping – no problem! ✔

Stav: ako nová (výstavný stroj), Fronius TPS 2700 Pulse Unit Ready to Weld ---> Kljdpfovl D Idsx Ab Sol Scope of delivery: ➤ Fronius TPS 2700 Power Source (270A TRANS PULS SYNERGIC) ➤ Fronius torch package with display on the torch (arc, amperage, jobs etc. adjustable directly from the torch) ➤ Earth cable 3–4m ➤ Brand new Messer pressure reducer ➤ Gas hose ➤ 15Kg spool adapter ►►► Ideal for mobile use This unit is perfect for fast and mobile applications. Easy to load into a car and take anywhere—without any compromise in welding quality. Naturally, also suitable for stationary use. FAQ: ----- How old is the machine? Our customers generally decommission their equipment after 3–5 years. Sometimes a bit more, sometimes less. What is the condition and does the device function perfectly? Yes! Everything works as it should! All units are dismantled, cleaned, worn parts replaced, reassembled, and tested by us. The equipment is clean—we never sell machines that look completely worn out! Excellent condition! Only minimal signs of use. All pictures are original images of our units. Sample pictures. None of our machines have display burn marks. Can I negotiate the price with you? If you purchase multiple units, we can discuss the price. Is shipping possible? Yes, we can ship. The unit will be secured on a pallet and shipped insured via our forwarder. Can I inspect the equipment? We are an online dealer. You can visit for pick-up, and you are welcome to test the unit before payment. We do not have fixed opening hours. Visits are by appointment only. Each unit is assembled to customer specifications and shipped after payment—that’s our standard procedure. Do you provide a warranty? No, we do not provide a warranty. We sell high-quality, affordable professional welding equipment in like-new condition, usually for 1/4 to 1/2 of the new price. With the difference compared to the price of a new unit, you could even buy two more from us or use the savings for maintenance over many years. For example, a new Fronius TPS 2700 as advertised here costs around €8,500. We offer it for less than 1/3 of the new price. All prices are starting prices; you can configure the equipment as needed. Robot or manual version. Long or short interconnection hose package. Various torch packages available. Synchropulse. 270, 400, or 500 amp models in stock. CMT version available as manual or robot variant. The best option is to call us—describe your intended application, and we’ll provide you with an initial price estimate.

Stav: nový,

Stav: ako nová (výstavný stroj), FRONIUS TPS 2700 s FK 4000 (SYNCHROPULS 270A ZARIADENIE) Alu Edition ✅ Obsah dodávky: ➤Zdroje Fronius TPS 2700 (270A TRANS PULS SYNERGIC) ➤Fronius FK 4000 vodné chladenie ➤Fronius horákový set s displejom na horáku (nastavenie oblúka, ampérove pozície atď. priamo na horáku) ➤Fronius pojazdný vozík ➤Uzemiaci kábel 3–4 m ➤Nový redukčný ventil Messer ➤Plynová hadica ►►► Ideálne na hliník Fronius TPS 2700 Alu Edition je špeciálne vhodný na zváranie hliníka. Presná zváracia technika – užívateľsky priateľská obsluha Kledpfewbitvjx Ab Sel ----- OKAMŽITÁ DOSTUPNOSŤ RIADNY DOKLAD Obhliadka možná v Rakúsku, Viedeň 1230! ✔ Zabezpečená paletová doprava bez problémov! ✔ ✅Otázky✅Otázky✅Otázky✅ Otázky: ✅Otázky✅Otázky✅ Otázky✅ ►►► V akom stave sú zariadenia? Pre vysvetlenie: kupujeme zánovné použité zariadenia, kompletne ich demontujeme, všetko dôkladne skontrolujeme, prípadne vymeníme opotrebované diely a až po úspešnej testovacej zváračke dávame zariadenie na predaj. "Všetky" zariadenia sú čisté, nemajú vypálené diery na displeji ani žiadne rozsiahle škvrny či preliačiny po celom zariadení! U nás kupujete stroj, ktorý je aj vizuálne atraktívny a nevyzerá opotrebovane! ►►► Dostaneme od vás faktúru pri kúpe? Áno, u nás dostanete riadnu faktúru. Ak máte platné IČ DPH, vieme v prípade splnenia podmienok pre vnútrokomunitárne dodanie v rámci EÚ vystaviť faktúru bez DPH. ►►► Aké sú možnosti platby? Platba vopred alebo hotovosť pri osobnom odbere. ►►► Je možná poistená preprava? Áno, radi vám kúpenu súpravu dobre zabalíme a pošleme poistenú na euro palete. ►►► Je súčasťou záruka? Predávame stroje za tretinovú cenu oproti novým a preto nemáme možnosť poskytovať záruku. Zariadenia si však môžete u nás otestovať a zaplatiť priamo na mieste v hotovosti. ►►► Prečo kúpiť u nás? Sme špecialisti na túto sériu zváracích zariadení Fronius; na sklade máme trvalo 60–80 kusov – výhradne Fronius, žiadne iné značky! Rozumieme týmto strojom a nepredávame nič, s čím nemáme skúsenosť.

Stav: veľmi dobrý (použitý), Fronius TPSi 270 ako plynom chladené prevedenie s dlhým Job Master horákom (UP/DOWN nastaviteľné vrátane displeja) ✅ Dodávka zahŕňa: ➤ Zdroj Fronius TPS 270i ➤ Fronius Job Master horák 4,5 metra s displejom a všetkými možnosťami nastavenia priamo na horáku ➤ Uzemňovací kábel ➤ Redukčný ventil Rozsah dodávky = viď foto Výkonný a všestranný zvárací stroj, 270 ampérov, plynom chladený – ľahká a kompaktná konštrukcia, ideálne riešenie pre mobilné použitie, no samozrejme vhodný aj na stacionárne použitie. Dostupný na Whatsapp / Viber ✅Otázky✅Otázky✅Otázky✅Otázky✅ ►►►Aký starý je stroj? Väčšinu strojov získavame po ich vyradení z účtovníctva. Vzhľadom na vysokú obmenu a rôzne predchádzajúce použitie neuvádzame presný vek. Pre nás je dôležité, že každý stroj je technicky v poriadku! ►►►V akom stave sú stroje? Vyberáme zachovalé použité stroje, kompletne ich rozoberieme, skontrolujeme, vymeníme prípadné opotrebované diely a po úspešnej testovacej zváračke ich uvádzame do predaja. Všetky stroje sú čisté, nemajú vypálené diery v displejoch ani veľké poškodenia na skrini prístroja! Kupujete zariadenie, ktoré je aj vizuálne zachovalé a nepôsobí úplne opotrebovane. ►►►Dostaneme faktúru? Áno, vystavujeme riadnu faktúru. Ak máte platné IČ DPH a spĺňate podmienky pre dodanie v rámci EÚ, vystavíme faktúru bez DPH. ►►►Možnosti platby? Platba vopred alebo v hotovosti pri osobnom odbere. ►►►Je možná poistená doprava? Áno, po dohode zariadenie starostlivo zabalíme a zaistíme prepravu na palete po celej Európe. ►►►Je k dispozícii záruka? Zariadenia predávame za tretinu novoceny, preto nemôžeme poskytovať záruku. Stroj je však možné pri odbere osobne otestovať a zaplatiť. ►►►Prečo nakupovať u nás? Sme špecialisti výhradne na túto sériu zváracích zdrojov Fronius – držíme skladom trvalo 60–80 kusov len značky Fronius. Rozumieme týmto strojom a nepredávame nič, o čom by sme nemali prehľad. Ksdpfx Aowblkqsb Soll Ak máte stroje na výkup, likvidáciu alebo výmenu, kontaktujte nás. Ďakujeme.

Stav: ako nová (výstavný stroj), Funkcionalita: plne funkčný, typ chladenia: voda, FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius wire feed unit VR 4000 ➤ Fronius intermediate hose package Standard from 1.5m ➤ Fronius trolley Klodpewbh Ifsfx Ab Sol ➤ Fronius hose package ➤ Ground cable 3-4m ➤ Pressure regulator With this unit, almost all materials can be welded, including aluminium, steel and stainless steel (V2A). It features filler wire programs and is also suitable for MIG brazing (CuSi), which is frequently used in bodywork applications. Additional options and applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and load characteristic curves to further expand the functions of the TPS device. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection possible in 1230 Vienna, Austria! ✔ Insured shipping on pallet is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the unit? Explanation: We purchase used devices in as-new condition, disassemble them, carefully check everything, replace wear parts if necessary, and only after successful test welding do we release them for sale. "All" units are clean and have neither burn marks on the displays nor numerous burn marks or dents distributed over the device! You are buying an item from us that is visually appealing and not in poor condition! ►►►Do we receive an invoice when purchasing? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and fulfil the requirements for an intra-Community delivery within the EU, we can issue a net invoice. ►►►Which payment options are available? Advance payment or cash on personal collection ►►►Is insured shipping possible? Yes, we are happy to send you the purchased set well-packed and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one third of their new price and unfortunately do not have the margin to provide a warranty. However, the units can be inspected and paid in cash on site. ►►►Why buy from us? We are professionals with this Fronius welding machine series and always carry 60-80 units in stock—exclusively Fronius, no other brands! We know these devices thoroughly and do not sell anything we are not confident about.

Stav: ako nová (výstavný stroj), ►►► FRONIUS TPS 3200 SET OFFER 3,290 Euros net incl. BINZEL TORCH PACKAGE UP DOWN or Fronius AW torch package with display on the torch incl. connector conversion (+500 Euros) ✅ Scope of delivery: ➤ Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC cooling unit – Standard with flow control, thermal control and coolant filter. The cooling unit switches off if the water cooling fails or gets too hot to protect the torch package. These features cost approx. €400 extra at Fronius. ➤ Fronius VR 7000 wire feed unit – Compact and practical - for us the most useful feed case - the wire is safely stored in the closed case. ➤ Fronius long intermediate hose package – Each machine is supplied with a 5m long connection hose between the power source and the wire feed case for more flexibility and better handling. Take the wire feed case to hard-to-reach spots! The connection hose is neatly placed on a hook at the side of the machine. (Hooks are custom produced by us) ➤ Fronius large trolley – Probably the best cart with a gas bottle holder on the market. ➤ Binzel torch package – With up/down amperage adjustment on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket spool adapter for large wire spools With this machine, it is possible to weld almost all materials, including aluminium, steel and stainless steel (V2A). It has pulse wire feed programs and is also suitable for MIG brazing (CuSi), which is frequently used in the bodywork sector. Further options available at extra cost Ksdpfxswbillo Ab Soll E.g. Fronius Job Master torch package (display on the torch) + EUR 450.00 The first 10 buyers will receive an additional --> 2nd torch package for free Currently 30+ ⭐TPS 3200 SET⭐ in stock ----- Debsum Rw Dokh Hufpokk IMMEDIATELY AVAILABLE PROPER INVOICE Inspection is possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ We are also available via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What condition are the machines in? Explanation: We buy as-new used machines, disassemble them, check everything, replace wear parts if necessary, and only after a successful test weld do we release them for sale. "All" machines are clean and have neither burn holes in the displays nor countless burn marks or dents all over the units! You are buying an item that is also ⭐worth seeing and does not look completely used up! ►►►Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for intra-community supply within the EU, we can issue a net invoice. ►►►Which payment options are available? Prepayment or cash on personal collection ►►►Why buy from us? We are professionals for this Fronius welding machine series and always stock 60-80 units – exclusively Fronius, no other manufacturers! We fully understand these machines and only sell what we know inside out.

Stav: ako nová (výstavný stroj), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard equipped with Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if water cooling fails or overheats to protect the torch package. These functions are an approx. €400 surcharge at Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our view the most sensible feed case – the wire is safely stored in the closed case. ➤ Fronius Intermediate Hose Package, long – Each unit is supplied with a 5-meter connection hose package between the power source and wire feed case for more flexibility and better handling. Take the wire feed case off the unit for use in hard-to-reach areas! The hose package is neatly mounted on a hook at the side of the unit. (Hooks are produced by us) ➤ Fronius Large Carriage – Probably the best carriage on the market with a gas cylinder holder. ➤ Binzel Torch Package – With Up/Down control for amperage adjustment on the torch. Kledpfowbil Sjx Ab Ssl ➤ Ground Cable 3–4m ➤ New pressure regulator from Messer ➤ New basket reel adapter for large wire reels With this machine, nearly all materials can be welded, including aluminium, steel, and V2A (stainless steel). It features push-pull wire programs and is also suitable for MIG brazing (CuSi), which is often used in sheet metal fabricating. Additional options available for a surcharge, e.g., Fronius AW4000/AW5000 Job Master torch package (display on torch) + €550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection possible in Vienna 1230, Austria! ✔ Insured pallet shipping is no problem! ✔ We are also reachable via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►► What condition are the units in? For your information: we purchase barely-used second-hand units, disassemble and thoroughly check them, replace any wear parts as needed, and only after successful test welding are they released for sale. "All" units are clean, with no burn marks on the displays and no numerous torch or dent marks on the units! When you buy from us, you get an item that is also ⭐worth seeing and not completely worn out! ►►► Do we get an invoice with the purchase? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and fulfill the requirements for intra-community delivery within the EU, we can provide a net invoice. ►►► What payment methods are available? Prepayment or cash on personal collection ►►► Why buy from us? We are professionals for this series of Fronius welding equipment and always have 60–80 devices in stock – exclusively Fronius! We do not sell any other brands. We know these machines inside out and only sell what we have full expertise in.

Stav: ako nová (výstavný stroj), ⭐ FRONIUS TPS 4000 ⭐ Fully Equipped Device Description / Scope of Delivery: Fronius TPS 4000 unit, full equipment – nothing is missing! - Power source: Pulse 400 Ampere - FK 4000 FC cooling unit with optional filter, including Flow Control (=> if no water circulates, the unit switches off to protect the cable assembly). - VR 4000 with optional rollers fitted underneath + long interconnection hose package + metal feed rolls – only the best components installed. - Fronius AW5000 hose package with Job Master function on the torch (=> Display on the torch / Amperage, job, feed, arc can be adjusted on the torch). Photo = Scope of delivery. All stated prices are base prices. Prices are individually quoted according to configuration request. Original price approx. €15,000 (net) – we offer it at 1/3 of the original price. Not comparable with Transsteel scrap. Why buy from us rather than others: - We are professionals when it comes to this Fronius welding unit series. We constantly have about 60-80 units in stock – only these Fronius units, no other manufacturers! - We do not just pass the units on – they are disassembled, inspected, worn parts replaced, and only once everything works flawlessly are the units sold. - All our units are sold with the popular Fronius torches. NO €100 e*b*a*y torch, but QUALITY! Fronius torches cost, depending on configuration, from €650 – €900 net! - Our units are "all" clean and have no burn holes in the displays or countless burn marks/dents all over the machine! You buy an item from us that is something to look at, not something that looks completely used up! Kledovlwh Dopfx Ab Sjl - As our customer, you have the possibility to obtain suitable spare parts and support at a favorable price if needed. - You receive a proper invoice from us with VAT shown. All units can be inspected, paid for, and collected from our main warehouse in Vienna by appointment! Insured pallet shipping is of course possible! All prices are base prices; you can customize the units with us. Robot unit or manual unit. Long or short interconnection hose package. Various hose packages to choose from. Synchropuls. 270, 400, or 500 amp units in stock. CMT version as manual or robot available. Best to give us a call, discuss your application, and we will provide you an initial price estimate.

Stav: takmer ako nový (použitý), Fronius použitý Kljdpfx Aopa N Aajb Sel -TPS4000CMT / TransPuls Synergic 4000 CMT R - Chladicí jednotka FK4000-RFC (4,045,837,632), vodou chlazená - Dálkové ovládání RCU5000i Univ.SD (4,046,098) - Podavač drátu VR7000 CMT R (4,045,963,000) - Snímač úhlu CMT (43,0001,1219) s robotickým hořákovým balíkem kPL Robacta - Rozhraní Interbus Rugged Line (4,045,885) (alternativně dostupné i konektory Profibus a Profinet)

Stav: veľmi dobrý (použitý), 1 x TransPuls Synergic 5000R a 2 x TransPuls Synergic 4000R zváracie zariadenia. Upozornenie: Cena je uvedená len za jedno zváracie zariadenie. Kledotkuyiepfx Ab Sol

Stav: takmer ako nový (použitý), Rok výroby: 2022, Funkcionalita: plne funkčný, číslo stroja/vozidla: 4,075,231, Fronius TPS 400i (sériové číslo: 33732247). Po implementácii nebol použitý v sériovej výrobe. Plne funkčný a ako nový. Kledpfxew Upnfs Ab Ssl

Stav: takmer ako nový (použitý), Rok výroby: 2022, Funkcionalita: plne funkčný, číslo stroja/vozidla: 4,075,231, Zváracie zariadenie Fronius TPS 400i. Po implementácii nebolo použité v sériovej výrobe. Takmer nové. Kledpfxsw Upnrs Ab Sjl

Stav: dobrý (použitý), Rok výroby: 1998, číslo stroja/vozidla: 0518018, Ponuka 24600 Technické údaje: - vhodné na zváranie ocele, hliníka, špeciálnych kovov, CrNi a pod. - Zvárací prúd: 450 A pri 60% zaťažení, 360 A pri 100% zaťažení Kodpfx Aovncfmob Sjll - Regulovateľný zvárací prúd v rozsahu 3 A – 450 A - Synergické riadenie nastavenia FRONIUS - Vodou chladené zariadenie FRONIUS - Samostatný podávač drôtu - Medzikáblový balík: zariadenie – podávač drôtu, dĺžka cca 14 m - 4-kladkový podávač drôtu, plynulo regulovateľný - Zvárací horák MIG-MAG, vodou chladený, dĺžka cca 4 m - Zemniaci kábel - Redukčný ventil - Mobilný podvozok - Pripojenie: 400 V / 6,6 A / 8,7 kVA - Rozmery: cca šírka 650 x výška 900 + 450 x hĺbka 1100 mm - Hmotnosť: cca 200 kg

Stav: dobrý (použitý), Rok výroby: 1998, číslo stroja/vozidla: 0618012, Technical data: - Suitable for welding steel, aluminum, special metals, CrNi, etc. - Welding current: 450 A at 60% duty cycle Kledpfsvncubox Ab Sel 360 A at 100% duty cycle - Welding current adjustable from 3 A to 450 A - Synergic control system FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Interconnecting cable set, machine to wire feeder: 1 m - Four-roll wire feed system, infinitely adjustable - Water-cooled MIG/MAG torch package, approx. 4 m - Ground cable - Pressure regulator - Mobile undercarriage - Power supply: 400 V / 6.6 A / 8.7 kVA - Dimensions: approx. W 650 x H 900 + 450 x D 1100 mm - Weight: approx. 200 kg

Stav: dobrý (použitý), Rok výroby: 1998, číslo stroja/vozidla: 0618019, Offer 24589 Technical data: - Suitable for welding steel, aluminium, special metals, CrNi, etc. - Welding current: 450 A at 60% duty cycle, 360 A at 100% duty cycle - Welding current adjustable from 3 A to 450 A - Synergic control FRONIUS - FRONIUS water cooling unit - Separate wire feed unit - Intermediate cable (machine to wire feed unit): approx. 14 m - 4-roll wire feed, steplessly adjustable - MIG/MAG torch with water cooling, approx. 4 m - Earth cable - Pressure regulator - Mobile chassis - Connection: 400 V / 6.6 A / 8.7 kVA Kljdpfxsvnb Tpj Ab Sel - Required space: approx. W 650 x H (900 + 450) x D 1100 mm - Weight: approx. 200 kg

Stav: dobrý (použitý), Rok výroby: 1995, číslo stroja/vozidla: 0523813, Ponuka 22728 Technické údaje: - Zvárací prúd max. 335 A pri 35% pracovnom zaťažení (ED) - max. 260 A pri 60% ED Klsdsrm Rpvjpfx Ab Ssl - max. 200 A pri 100% ED - Zvárací prúd nastaviteľný v 36 jemných krokoch od 40 A do 335 A - 2-kladkový podávač drôtu - Plynulá regulácia rýchlosti podávača drôtu - Prepínateľný režim 2-takt / 4-takt - Bodové a intervalové zváranie - Vzduchom chladený horák, dĺžka 4 m - Zemniaci kábel - Redukčný ventil - Pripojenie 400 V - Priestorové nároky cca: šírka 550 x výška 1000 x hĺbka 1000 mm - Hmotnosť cca 150 kg

Stav: dobrý (použitý), Rok výroby: 1998, číslo stroja/vozidla: 0625004, Offer 24603 Technical Specifications: - Suitable for welding steel, aluminum, special alloys, CrNi, etc. - Welding current: 450 A at 60% duty cycle - 360 A at 100% duty cycle - Adjustable welding current range: 3 A – 450 A - Synergic control system FRONIUS - FRONIUS water cooling unit - Separate wire feed case Ksdpfxjvncqve Ab Ssll - Intermediate package device – wire feed case: 10 m - 4-roll wire feeding, continuously adjustable - MIG/MAG torch, water-cooled, approx. 4 m - Ground cable - Pressure regulator - Mobile undercarriage - Connection: 400 V / 6.6 A / 8.7 kVA - Space requirement: approx. W 650 x H 900 + 450 x D 1100 mm - Weight: approx. 200 kg

Stav: použitý, Funkcionalita: plne funkčný, TIG zvárací stroj s vodným chladením na hliník Značka: Fronius Model: MagicWave 3000 Pracovný cyklus: 250A – 60 % 300A – 35 % Napájanie: Trojfázové 380 V Zariadenie s vodným chladením. Obsahuje funkciu AC/DC na zváranie hliníka. Technológia Active Wave: zlepšuje stabilitu oblúka a znižuje hladinu hluku pod 80 dB aj pri plnom výkone (300 A) Inteligentná automatizácia: - Automatická tvorba wolfrámovej gule na elektróde Kledpfx Abjxf Hw Dj Sjl - Automatické riadenie prietoku plynu po zváraní v závislosti od zváracieho prúdu - Ventilátor s tepelnou reguláciou a automatickým vypnutím, ak nie je potrebné chladenie Spôsoby štartu oblúka: HF (vysokofrekvenčný, bezdotykový) a Lift-Arc (kontakt) – vhodné do citlivých oblastí bez elektromagnetických rušení Programy a digitálne ovládanie: viacjazyčný plnotextový displej, úplná digitalizácia procesu, režim „job mode“ na uloženie a načítanie pracovných nastavení Pokročilé funkcie: dvoj- a štvorkroková prevádzka, pulzné zváranie TIG, tacking s TAC programom, bodové zváranie, ovládanie Up/Down priamo z horáka Súčasťou dodávky: - TIG horák Fronius - Uzemňovací kábel - Regulátor na plyn

Stav: ako nová (výstavný stroj), FRONIUS MAGICWAVE 5000 AC DC Rozsah dodávky: ➤ Fronius MagicWave 5000 (500A) Kledpfx Abjxhd Tuj Sjl ➤ Fronius FK 4000 vodné chladenie ➤ Fronius WIG ručný zvárací horák ➤ Fronius pojazdný vozík ➤ Uzemňovací kábel 3-4 m ➤ Redukčný ventil

Stav: použitý, Rok výroby: 2019, Technické údaje: Napätie: U1: 400 V Napätie naprázdno: 70 V Hmotnosť zariadenia cca: 100 kg / jednotka Rozmery stroja: cca 0,85 x 0,37 x 1,25 m na jednotku Klsdpfou Nwhiex Ab Sol K dispozícii sú 4 zváracie stroje Fronius TransPuls Vhodné pre priemyselné použitie, napr. pre roboty. Oblasti použitia: zvárací proces „CMT“, pre všetky MIG/MAG zváracie práce Mobilné, so 4 kolesami (2 otočné) S podávačom drôtu typ: VR 7000-CMT: Rýchlosť podávania drôtu: 0,5 – 22 m/min; možný priemer drôtu 0,8 – 1,2 mm Diaľkové ovládanie RCU5000i univoSD 1-meter medzihadicová súprava Prepravný vozík Stupeň ochrany IP 23 Chladenie typ AF Ovládanie cez displej RCU 5000i V dobrom stave.

Stav: takmer ako nový (použitý), Rok výroby: 2019, prevádzkové hodiny: 20 h, Výbava: dokumentácia / manuál, Súprava zváracieho robota 1. Zvárací robot KUKA typ CYBERTECH - KR 20 R-1810 KRC4, rok výroby 2019 2. Polohovadlo s 2 osami, max. 500 kg Kledpfollyfiox Ab Sjl 3. Zváracie zariadenie FRONIUS typ TPS 400i, rok výroby 2023 – nové

Stav: použitý, typ chladenia: vzduch, zvárací prúd pri 60% pracovného cyklu: 210 A, zvárací prúd pri 100 % pracovného cyklu: 170 A, vstupný prúd: 16 A, typ ochrany (IP kód): IP23, zvárací prúd (max.): 270 A, vstupná frekvencia: 50 Hz, Výbava: Dostupný typový štítok, dokumentácia / manuál, Fronius TPS 2700 pripravený na zváranie s rozsiahlym príslušenstvom. Aktuálny zvárací drôt 3Si1 1mm Klsdpfew N Iiqsx Ab Sel Špeciálne drôty: 1.4576 5kg, 1.4470 5kg, CuSi3 3kg, CuAl8 3kg. Príslušenstvo horáka: kontaktné trubky, držiak trysky, podávacie kladky TR 0,8 a 1,0, RD1,2 Zváracie programy pre oceľ CO2 a zmiešané plyny, CrNi ocele, rúrkové a hliníkové drôty, manuálne oblúkové zváranie a TIG dotykové zapaľovanie. Plastová a teflónová vložka, 20-litrová oceľová fľaša so zmiešaným plynom, s regulátorom tlaku a vozíkom, návod na obsluhu.

Stav: takmer ako nový (použitý), Rok výroby: 2014, prevádzkové hodiny: 715 h, Funkcionalita: plne funkčný, číslo stroja/vozidla: L62500, dosah ramena: 1 919 mm, celková výška: 3 200 mm, celková šírka: 4 600 mm, celková dĺžka: 5 200 mm, vstupné napätie: 400 V, typ chladenia: voda, Predávame Yaskawa TIG zváraciu bunku z októbra 2014 vo vynikajúcom stave, s minimom prevádzkových hodín potvrdených fotodokumentáciou. Stroj bol používaný len krátke obdobie a následne odstavený, keďže už nevyrábame komponenty, na ktoré bol pôvodne zakúpený. Kedpfxsx Exl Ne Ab Sjll Systém je vybavený otočným stolom s maximálnou kapacitou obrobku 1000 × 1500 mm, ktorý umožňuje striedavé opracovanie dvoch kusov pre optimalizáciu cyklových časov a zvýšenie produktivity. Súčasťou je aj systém podávania prídavného drôtu (push-wire), ktorý je vhodný na naváranie, resp. zváranie oblastí bez základného materiálu. Inštalovaná TIG technológia je vysokovýkonná, určená pre aplikácie vyžadujúce precíznosť, opakovateľnosť a vysokú kvalitu zvaru. Technická podpora je zabezpečená spoločnosťou Roboteco S.p.A. (Yaskawa) s spoľahlivým servisom a medzinárodnou servisnou sieťou. Stroj je okamžite dostupný v lokalite Tre Ville (TN), Taliansko. Predajná cena zahŕňa: - Profesionálnu demontáž - Naloženie na dopravný prostriedok kupujúceho Detailné fotografie a doplňujúce technické informácie sú k dispozícii na vyžiadanie.