Herkules kúpiť použité (5)

Stav: použitý, Sady valcov pre profilovú ohýbačku, 3-valcový prstencový ohýbací stroj HERKULES WETZLAR Valce sú vhodné pre profilovú ohýbačku HERKULES WETZLAR typ BO 238 N Priemer hriadeľa: 60 mm s 18 mm perovou drážkou 2 kusy valcov Sada č. 1, priemer valca = 110 mm, šírka valca = 180 mm 2 kusy valcov Sada č. 2, priemer valca = 160 mm, šírka valca = 40 mm 3 kusy valcov Sada č. 3, priemer valca = 150 mm, pre priemer rúrky Ø 33 mm, šírka valca 87 / 115 mm - Sada č. 3 s adaptérovým krúžkom z Ø 93 na Ø 60 mm bez perovej drážky Stroj mal 2 poháňané valce Hmotnosť všetkých valcov 57 kg Lhodpfxsglaq Is Agujn dobrý stav

Stav: použitý, Swing diameter over bed: 2400 mm Swing diameter over carriage: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Faceplate diameter: 1650 mm Speed range: 1.5 – 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over carriage: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 – 1600 mm (with special jaws up to 2050 mm) Clamping diameter in tailstock faceplate: 300 – 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Faceplate Lhodpjxddvnofx Agujn Faceplate diameter: 2000 mm Faceplate speeds, infinitely variable in 4 stages: 1.5 – 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange centre tip angle: 70° Carriages Travel of parting slide: 500 mm Travel of facing slide: 1400 mm Rapid traverse longitudinal: 2000 mm/min Rapid traverse cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 – 300 mm/min Infinitely variable feeds, cross: 0.3 – 120 mm/min Maximum cutting force at carriage: 20,000 kg Tailstock Diameter of faceplate (removable): 1650 mm Clamping diameter of faceplate: 1400 mm Flange centre tip angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying device for first carriage - Copying length: 8500 mm - Max. copying depth in a single pass: 500 mm Boring device: - Boring bar: 460 x 390 mm - Boring diameter: 600 – 1000 mm - Max. boring depth in a single pass: 2700 mm At Ks of 200 kp/mm² – max. s = 1.5 mm/rev a = max. chip cross-section 30 mm² at overhang of 1000 mm Chip cross-section decreases with increasing boring depth A taper turning attachment with setting angle up to 8° and max. taper length (in one pass) of 2000 mm, setting accuracy ± 5 minutes. A taper turning attachment with setting angle up to 15° and max. taper length (in one pass) of 1000 mm, setting accuracy ± 5 minutes. 125 kg auxiliary crane on spindle head.

Stav: použitý, Rok výroby: 2017, číslo stroja/vozidla: 117119, Katalógové číslo 25158 Technické údaje: Lhodpfx Agexay D Heuon - Prietok vzduchu cca 220 m³/h - Trieda prachu M - Pripojovací nástavec 50 mm - Zásuvka - Pneumatické pripojenie - Pohonný výkon 400 V / 1,3 kW - Potrebná plocha (Š x V x H): 1000 x 1350 x 500 mm - Hmotnosť cca 120 kg

Stav: dobrý (použitý), HERKULES BO 230 K2 / Stroj na ohýbanie kruhov a profilov vrátane sád valcov -Technické údaje viď obrázky -6x sád valcov -Obslužné náradie -Stroj vybavený transportnými kolieskami Rozmery: DxŠxV: 1,6x1,6x1,7 metra; Hmotnosť: 1,8 tony Možné chyby a omyly v zadávaní údajov. Lsdpoxbh Trjfx Aguehn

Stav: použitý, Swing diameter over bed: 2400 mm Lodoxc Ny Aepfx Aguehn Swing diameter over support: 2270 mm Turning length: 12,000 mm Control: SIEMENS 820T Drive power: 185 kW Faceplate diameter: 1,850 mm Speed range: 1.6 – 175 rpm Maximum workpiece weight: 70,000 kg Technical Data CONTROL: SIEMENS 820T Work Area Maximum swing diameter over support: 2,270 mm Maximum swing diameter over bed: 2,400 mm Maximum turning length with 30 mm slide: 12,000 mm with 80 mm slide: 11,500 mm Chuck diameter in headstock faceplate: 300 - 2,040 mm Chuck diameter in tailstock faceplate: 300 - 1,300 mm Capacity in roller rests: 1,000 - 1,750 mm Load capacity: 35 t Capacity in steady rests: 800 - 1,100 mm Load capacity: 30 t Capacity in steady rests type M0911: 300 - 1,100 mm Maximum workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2,200 mm Stepless speed range in 4 stages: 1.6 – 175 rpm Maximum torque at rated speed: 220,000 Nm Main motor power: 185 kW Flange center angle: 70° Supports Cross slide travel: 735 mm Grooving slide travel, 35 mm width: 720 mm Face slide travel, 80 mm width: 720 mm Stepless adjustment of slides Rapid traverse longitudinal: mm/min Rapid traverse cross: mm/min Stepless feed, longitudinal: 0.05 – mm/min Stepless feed, cross: 0.05 – mm/min Maximum cutting force at support: 200,000 N Face slide: heavy-duty turning and BTS system Tailstock Faceplate diameter (removable): 1,850 mm Clamping diameter of faceplate: 1,300 mm Flange center angle: 70° Rapid traverse: 2,000 mm/min Special Equipment Control: SIEMENS Slide measuring system Boring bar holder with ø 300 mm boring bar mounting