Kellenberg kúpiť použité (107)

Stav: generálne opravený (použitý), Rok výroby: 2025, Funkcionalita: plne funkčný, číslo stroja/vozidla: 1315/451, Completely overhauled: Mechanical, geometry, hydraulic, and electrical parts (checked and/or replaced) Wheelhead Disassembled, cleaned, worn and defective parts replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced and adjusted. Newly painted. Workhead Disassembled, cleaned, worn and defective parts replaced, motor overhauled, belts replaced. New spindle bearings. Newly painted. Bjdpfsw U Ry Nox Adrslc Tailstock Disassembled, checked, refurbished. Hydraulics Disassembled, motor checked, hoses and worn or defective parts replaced. Hydraulic block checked. X Axis Disassembled, worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, tables reground. Z Axis Disassembled, tables reground, worn and defective parts replaced, hydraulic piston overhauled, newly painted. Electrical cabinet Fully checked, various relays replaced. Paintwork Colors: White RAL 9003 and Grey RAL 7011. Geometry as per manufacturer protocol. Various accessories checked and cleaned. Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2,200 kg Customs position: 8460.2920 TECHNICAL SPECIFICATIONS Nominal workpiece length between centers: 600 mm Maximum workpiece length between centers (overhanging headstock): 750 mm Center height, standard: 125 mm Center height with interchangeable riser blocks: 175 => 250 mm Max. workpiece diameter (125 mm center height): 250 mm Max. workpiece diameter with riser blocks: 350 => 500 mm Table swivel angle each direction: 10° Maximum length for flat surface grinding (maximum width = 200 mm): 900 mm Continuously variable hydraulic table speed: up to approx. 6 m/min Table reverse dwell time: 0-5 sec. Wheel for external grinding, diameter-width-bore: 400x50x127 mm Wheel for surface grinding: 250x13x76 mm Wheelhead spindle speeds: 1500/1700/2200/3600 rpm Wheelhead swivel: 270° Indexed every 90° Wheelhead vertical travel, center height: 125–350 mm Wheelhead transverse travel: 285 mm Hydraulic rapid infeed and retraction travel: 40 mm Intermittent feed per table reversal: 0.001–0.03 mm/diameter Continuous plunge grinding feed: 0–0.9 mm/diameter Micrometric feed stop, graduation: 0.001 mm/diameter Workhead rotation: 360° Infinitely variable workhead speeds, standard/special rpm: 20–400/10–400 Internal taper of workhead/tailstock: 5/3 Morse Wheelhead motor: approx. 4 HP All technical data are given without engagement and subject to error or omission.

Stav: generálne opravený (použitý), Rok výroby: 2025, Funkcionalita: plne funkčný, číslo stroja/vozidla: 1845/455, Completely overhauled: Mechanics, geometry, hydraulics, and electrical components Wheelhead Disassembly, cleaning of parts, replacement of worn and defective components, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, plus adjustment. Newly painted. Workhead Disassembly, cleaning of parts, replacement of worn and defective components, replacement of motor, replacement of belts. New spindle bearings. Newly painted. Tailstock Disassembly, cleaning of parts, replacement of worn and defective components, replacement of motor, replacement of belts. New spindle bearings. Newly painted. Internal grinding attachment Disassembly, cleaning of parts, replacement of worn and defective components, installation of the bracket and alignment of geometry. Newly painted. Hydraulics Disassembly, motor replacement, replacement of hoses, defective and worn parts replaced. Hydraulic block control. X-Axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc.; overhaul of hydraulic piston; grinding of tables. Z-Axis Disassembly, grinding of tables, replacement of worn and defective components, overhaul of hydraulic piston, scraping of V and flat guides. Newly painted. Measuring system 2-axis digital display included Electrical cabinet Replacement of motor terminals and relay controls. New wiring. New speed inverter for the workhead. TECHNICAL SPECIFICATIONS Centre distance 1500 mm Centre distance including headstock and tailstock overhang 1650 mm Centre height, standard 125 mm Centre height with riser blocks 225/250 mm Max. grinding diameter Ø 250 mm Max. grinding diameter with riser blocks 450/500 mm Table Usable surface 2060x140 mm Max. length and width for surface grinding 1750x200 mm Longitudinal travel, manual or hydraulic 1750 mm Manual table feed, 1 handwheel revolution - coarse 20.006 mm Manual table feed, 1 handwheel revolution - fine 2.457 mm Table speed, continuously hydraulic -6 m/min Table swivel 6° Stop, return 0-5 sec. Work spindle Workpiece speeds, continuously variable electric 20-400 rpm Swivel 360° Internal taper of work spindle MT5 Tailstock Internal taper of tailstock spindle MT3 Manual or hydraulic spindle return travel 30 mm Dressing diamond internal taper MT0 Universal grinding head Transversal slide travel for wheel 285 mm Rapid wheel slide travel, forward and backward 40 mm Grinding spindle speeds 1500 – 1700 – 2200 – 3600 rpm Vertical travel of grinding spindle, centre height 125-330 mm Grinding wheel for cylindrical grinding, max. 400x50x127 mm Blodpfx Aoxt Ilfedrsc Grinding wheel for surface grinding, max. 250x20x76 mm Grinding head swiveling with locking in 90° increments 270° Wheel feed One vernier division 0.005 mm/Ø Automatic feed, max. 0.9 mm/Ø Motors Grinding spindle motor 2,900 rpm / 4.0 hp Work spindle motor 3,000 rpm / 2.0 hp Coolant pump motor 2,850 rpm / 0.12 hp Internal grinding device Bore 70 mm Internal grinding spindle speed Ø70 mm 14,000 rpm Internal grinding spindle speed Ø50 mm 21,000 rpm Unless otherwise stated, technical data are provided without guarantee for errors or omissions.

Stav: generálne opravený (použitý), Funkcionalita: plne funkčný, číslo stroja/vozidla: 32461/2384, Country of manufacture: Switzerland Voltage: 380 / 50 / 3 Net weight: 2200 kg TECHNICAL DATA Nominal centre distance: 600 mm Maximum centre distance (workpiece spindle head and tailstock extended): 750 mm Standard centre height: 125 mm Centre height with interchangeable intermediate plates (workpiece spindle and tailstock): 175 → 250 mm Bjdpfx Aed Amifjdrjlc Maximum possible swing diameter (125 mm centre height): 250 mm Maximum possible swing diameter with intermediate plates: 350 → 500 mm Swivelling range of worktable, each side: 10° Maximum length for surface grinding (table width = 200 mm): 900 mm Table speed, hydraulically infinitely variable: approx. 6 m/min Table reversal delay: 0-5 sec Grinding wheel for cylindrical grinding, diameter x width x bore: 350/400 x 50 max. x 127 mm Grinding wheel for surface grinding, diameter x width x bore: 250 x 13 x 76 mm Grinding spindle speeds: 1500/1700/2200/3600 RPM Swivelling range of grinding spindle head: 270° Locking positions: every 90° Vertical movement of the grinding spindle head, centre height: 125–350 mm Cross movement of the grinding slide: 285 mm Hydraulic rapid advance and return of the grinding slide: 40 mm Infeed per table reversal, stepless: 0.001–0.03 mm/rev Infeed for plunge grinding: 0–0.9 mm/rev Micro stop for infeed per division: 0.001 mm/rev Swivelling range of workpiece spindle head: 360° Workpiece speed, steplessly adjustable, standard/special: 20–400 / 10–400 RPM Internal taper, workpiece spindle/tailstock: Morse 5 / Morse 3 Grinding spindle motor, approx.: 4 HP Errors and omissions excepted. Technical data supplied without obligation. Inventory No. 2170089, Machine Accessories List: 1 workpiece headstock MK5 1 sine bar without comparator 1 grinding headstock with 4 drive pulleys 1 tailstock MK3 1 collet drawbar system with puller and reducing sleeve B32 1 internal grinding attachment with Fischer UJ50x250 quill – drive pulley Ø 48 for 14000 RPM 1 rotatable wheel dressing unit with 50 mm base 1 table rotation stop without comparator 1 coolant system by decantation 1 ejector 1 balancing bar

Stav: dielensky repasované (použité), Funkcionalita: plne funkčný, výška stredu: 250 mm, šírka v strede: 1 500 mm, brúsený priemer: 500 mm, Zdvih pinoly koníka: 30 mm, Výbava: dokumentácia / manuál, The machine has been partially overhauled and features, among other upgrades, new geometry and a new control cabinet. The bearings have been replaced. TECHNICAL DETAILS WORKING AREA Centre distance: 1,500 mm Centre height: 250 mm Max. grinding diameter: 500 mm Table swivel: ± 8 ° GRINDING HEAD Grinding wheel dimensions: 400 x 50 x 127 mm Spindle speeds: 1,500 / 1,700 / 2,200 rpm Internal spindle bore: 90 mm WORKPIECE HEADSTOCK Headstock orientation: 180 ° Spindle speed: 20 - 400 rpm Internal spindle taper: Morse 5 TAILSTOCK Internal taper: Morse 4 Tailstock quill stroke: 30 mm MACHINE DETAILS DRIVES Grinding head motor power: 3 kW Tailstock motor power: 0.9 kW MACHINE DATA Dimensions: 2,860 x 1,680 x 1,670 mm Weight: 2,500 kg EQUIPMENT Automatic working cycle Coolant tank with pump Internal grinding spindle External grinding wheels Dressing device Documentation Bljdpfxexgrd So Adrec Note: A digital display can be purchased optionally for €3,600.

Stav: dielensky repasované (použité), Funkcionalita: plne funkčný, výška stredu: 175 mm, šírka v strede: 1 000 mm, brúsený priemer: 350 mm, Zdvih pinoly koníka: 30 mm, Výbava: dokumentácia / manuál, Stroj bol čiastočne generálne opravený a zahŕňa okrem iného novú geometriu a nový rozvádzač. Ložisko bolo vymenené. TECHNICKÉ ÚDAJE Oblasť obrábania Vzdialenosť medzi hrotmi: 1 000 mm Výška hrotov: 175 mm Maximálny priemer brúsenia: 350 mm Rozsah natočenia stola: -/+ 8 ° Brúsiaca hlava Univerzálna brúsiaca hlava: áno Rozmery brúsneho kotúča: 400 x 50 x 127 mm Otáčky vretena: 1 500 / 1 700 / 2 200 Otvor pre vnútorné vreteno: 90 mm Vreteno Otáčky vretena: 20 - 400 ot./min Upínanie vretena: Morse 5 Koník Možnosť otáčania koníka: 180 ° Bledpsxgq U Aofx Adroc Vnútorný kužeľ koníka: Morse 4 Vysunutie pinoly koníka: 30 mm PARAMETRE STROJA Pohony Výkon motora brúsiacej hlavy: 3 kW Výkon motora koníka: 0,9 kW Rozmery stroja: 2 860 x 1 680 x 1 670 mm Hmotnosť: 2 500 kg VYBAVENIE Automatický pracovný cyklus Koník Nádrž na mazivo s čerpadlom 1 vnútorné brúsne vreteno Vonkajšie brúsne kotúče Zarovnávacie zariadenie Dokumentácia Poznámka: Digitálny odpočet je možné dokúpiť za 2 500 €.

Stav: dielensky repasované (použité), KELLENBERGER KEL-VISTA UR 175X600 je CNC kruhová brúska určená pre vysokú presnosť, spoľahlivosť a precíznosť. Kapacita: výška hrotu 175 mm; vzdialenosť medzi hrotmi 800 mm; dĺžka brúsenia 600 mm; max. Ø 349 mm; max. hmotnosť obrobku 100 kg. Základné údaje: Z 750 mm; X 320 mm; rozmery kotúčov L Ø400×80×127, R Ø300×40×127; otáčky brúsneho kotúča 875–1900 min⁻¹ (plynule nastaviteľné); brúsny motor 5 kW; vreteno obrobku 8–800 min⁻¹; rýchloposuv 12 m/min; 3×400 V 50 Hz; hmotnosť cca 3000 kg; rozmery 3200×1700×2000 mm. Príslušenstvo: chladenie, vnútorný okruh chladenia, papierový filter, dotyk MARPOSS, merací systém MOVOMATIC, zariadenie na vnútorné brúsenie, vyvažovačka, RS-232. Pre úzke tolerancie v automotive, hodinárstve, letectve a medicínskej technike. Blsdjxx U Taspfx Adrjc

Stav: použitý, The KELLENBERGER KEL-VARIA R175 x 1500 is a CNC cylindrical grinding machine designed for high precision, top accuracy, and reliable operation. Capacities: centre height 175 mm, centre distance 1500 mm, Z-axis 1650 mm, maximum workpiece weight 150 kg; grinding wheel Ø500×80 mm (bore 203 mm) or Ø400×63 mm (bore 127 mm); grinding spindle travel max. 320 mm. Technical data: infinitely variable grinding wheel speed 1000–2150 rpm (peripheral speed 45 m/s); feed rate 7500 mm/min; swivelling workhead -10/+100° with 8–800 rpm; permissible load 160 Nm; grinding spindle motor 7.5 kW, workhead motor 2 kW; connection 3×400 V 50 Hz; rapid traverse 15 m/min; weight approx. 6000 kg; dimensions 4700×2300×2000 mm; compressed air 6 bar. Accessories: coolant system, paper filtration unit, MARPOSS touch probe, set of grinding wheels, live centre, set of centres, set of workpiece drivers, set of gap gauges, lighting, 2 tool cabinets, tailstock with fine adjustment, coolant/mist extractor, collet chuck. Achieves tight tolerances. Bjdpexx U S Aefx Adrelc

Stav: dielensky repasované (použité), KELLENBERGER 600 U 175 je vysokopresná vonkajšia brúska, presná a spoľahlivá. Kapacita: výška hrotu 175 mm, vzdialenosť medzi hrotmi 600 mm; brúsny kotúč Ø350×50 mm, otvor 127 mm; natočenie brúsnej hlavy 270°. Technické údaje: otáčky kotúča 1500–3600 ot/min (4 stupne); vreteno obrobku 20–400 ot/min (plynulo nastaviteľné); naklonenie stola 10°, posuv do 6 m/min; pripojenie 3×380 V 50 Hz; motor brúsneho vretena 4 HP; hmotnosť ≈2200 kg; rozmery 3000×1750×1600 mm. Príslušenstvo: digitálne odmeriavanie v 2 osiach, koník s jemným nastavením, vnútorné brúsenie, kryt brúsneho kotúča, ochranné zariadenie, posuvné dvere. Vhodná na úzke tolerancie v automobilovom, hodinárskom, nástrojárskom, leteckom a medicínskom priemysle. Blsdpfexx U H Tjx Adrsc

Stav: použitý, KELLENBERGER KEL-VARIA 2RU 225/1500 je CNC kruhová brúska pre vysokú presnosť, presnosť a spoľahlivosť. Parametre: výška hrotu 225 mm, vzdialenosť medzi hrotmi 1500 mm, max. brúsny Ø 432 mm, hmotnosť obrobku 150 kg; kotúče L 400×63×127, R 500×80×127. Otáčky kotúča 1000–2150 min‑1 (45 m/s); vreteno obrobku 8–800 min‑1, kužeľ 5 CM, povolené zaťaženie 160 Nm. Koník 4 CM, posuv pinoly 50 mm, tlak 200–700 N; pripojenie 3×400 V 50 Hz. Príslušenstvo: KEL-ASSIST 100, MOVOMATIC, KEL-SET, MOVOMATIC C25, KEL-BALANCE, IKZ, papierový filter, magnetické skľučovadlo Ø400, orovnávač, držiak diamantu. Vhodné pre úzke tolerancie v automobilovom, hodinárskom, nástrojárskom, leteckom a medicínskom priemysle. Bjdjxx U Haopfx Adrjlc

Stav: veľmi dobrý (použitý), Rok výroby: 1978, Stroj je možné si prezrieť v prevádzke pod napätím. Bedowz Emlspfx Adrolc

Stav: použitý, TECHNICKÉ ÚDAJE - Vzdialenosť medzi hrotmi: 600 [mm] - Výška hrotov: 175 [mm] - Naklonenie stola: 11 [°] UNIVERZÁLNY DRŽIAK BRÚSNEHO KOTÚČA – VRETENÍK - Rozmery ľavého brúsneho kotúča: 400 x 50 x 127 [mm] - Rozmery pravého brúsneho kotúča: 225 x 20 x 76,2 [mm] - Výkon motora: 3 [kW] - Otáčky vretena: 1500 / 1700 / 2200 - Orientácia držiaka brúsneho kotúča: 270 [°] VRETENÍK OPErÁTORU OBROBKU - Orientácia vreteníka obrobku: 360 [°] - Rozsah otáčok vretena obrobku: 20 – 400 [ot/min] - Vnútorný kužeľ: Morse 5 - Výkon motora: 0,9 [kW] PROTIVRETENÍK - Vnútorný kužeľ: CM4 - Posuv pinoly: 30 [mm] Bjdpfx Aouhbywedrjlc ROZMERY - Potrebný priestor: 2580 x 1680 [mm] - Výška: 1670 [mm] - Hmotnosť: 2200 [kg] PRÍSLUŠENSTVO - FISCHER vnútorné brúsiace vreteno: 14 000 [ot/min]

Stav: použitý, Rok výroby: 2000, Grinding diameter: 450 mm Grinding length: 1000 mm Center height: 225 mm Photo of a previously delivered machine with similar configuration: - Major maintenance - Table geometry renewed - Partial repainting of the interior Grinding wheel equipment LEFT: 400x63x127 mm (standard) Bsdpfx Aoxzk Nijdrolc Grinding wheel equipment RIGHT: 300x40x127 mm Internal grinding attachment Ø120 mm for HF spindles CNC control system: KELCO 120 C axis for non-circular grinding (Kel-Poly) B-AXIS: CNC-controlled B axis KELCO 120: v constant at 35 m/s or 45 m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for tailstock NO micro adjustment at the tailstock Spring-loaded quill insert Above-table cooling Standard workpiece spindle head MK 5 DIN 55026 size 5" MICRO adjustment for the standard workpiece spindle head Dressing device under the table Active longitudinal positioning KELPOS, MARPOSS, mounted on grinding head Tool measuring system KELSET, MARPOSS Touch-off sensor MARPOSS Measuring control MARPOSS Minialsar prepared Paper band filter

Stav: pripravené na použitie (použité), K dispozícii je vonkajšia brúsiaca fréza Kellenberger. Vzdialenosť medzi hrotmi: 1000mm, výška hrotu: 175mm, max. priemer obrobku: 250mm, pojazd X/Z: 1000mm/220mm, priemer brúsneho kotúča: 500mm, otáčky: 1530 ot./min. Rozmery stroja X/Y/Z: cca 3000mm/1850mm/1750mm, hmotnosť: cca 3150kg. Osobná obhliadka je možná. Bsdpfx Adexxzi Ijrslc

Stav: dobrý (použitý), dĺžka brúsenia: 1 000 mm, brúsený priemer: 350 mm, Predávame našu kruhovú brúsnu stroj Kellenberger 1000U Brúsny priemer: 350 mm Brúsna dĺžka: 1000 mm Tento stroj má zosilnenú vretenovú hlavu a môže byť zvýšený. Blodpfsxzqivsx Adrec Poznámky: - Cena nezahŕňa žiadne príslušenstvo! - Odbor kupujúcim, zo staveniska. - Termín odberu je stanovený po dohode s predávajúcim. - Bez záruky - Platba vopred (faktúra) alebo v hotovosti pri odbere

Rok výroby: 2008, Stav: použitý, Baliaci stroj na 10-kusové a 6-kusové kartóny pre 330 ml jednorazové fľaše, vrátane dátovacieho zariadenia Videojet (rok výroby 2016) Stroj (doplnok): Balicí stroj na celokartónové obaly Napájanie: 400 V Stlačený vzduch: 6 bar Dĺžka: 5,4 m Šírka: 1,15 m Výška: 1,95 m Základná konštrukcia: na nohách Blsdpsvcqn Eefx Adrsc Výbava: Inkjet datovacie zariadenie (rok výroby 2016), jednotka pre lepenie horúcim lepidlom Hmotnosť: 700 kg

Stav: veľmi dobrý (použitý), s vnútorným brúsnym zariadením Výška hrotu: 125 mm Vzdialenosť medzi hrotmi: 600 mm Brúsny kotúč: 400 x 40 x 127 mm Rôzne príslušenstvo Blodpfxjiu E Trs Adrsc MARCELS MASCHINEN AG

Stav: generálne opravený (použitý), Stroj kompletně repasován S digitálním displejem Vzdálenost hrotů: 175 mm Mezihrotová vzdálenost: 1000 mm Brousicí kotouč: 400 x 50 x 127 mm + 225 x 20 x 76,2 mm Otáčky brousicího kotouče: 1 500–2 200 ot./min S vnitřním broušením Různé příslušenství Blsdpfxjwhk Uuo Adrjc MARCELS MASCHINEN AG

Rok výroby: 1979, Stav: generálne opravený (použitý), Funkcionalita: plne funkčný, TECHNICAL DETAILS Centre height: 125 mm + heights of 50 mm Distance between centres: 1,000 mm Grinding wheel › Diameter: 400 mm › Width: 50 mm › Bore: 127.0 mm Swivel angle: 270° Workpiece spindle head: 20 – 400 rpm Spindle taper: 5 MT Tailstock taper: 3 MT Table swivel angle: 8° Table speed: stepless up to 6.0 m/min Internal grinding spindle with 60,000 rpm External grinding wheel motor: 4.0 kW Workpiece spindle motor: 1.5 kW Machine weight: 3,100 kg Overall machine dimensions: 2,860 × 1,680 × 1,670 mm (L × W × H) EQUIPMENT & SCOPE OF DELIVERY • Machine has been fully retrofitted • New control cabinet & new wiring diagram Bodpok H Hp Nsfx Adrelc • New motor & frequency inverter for workhead • 2-axis DRO • Coolant tank with paper filtration • Geometry in accordance with Kellenberger protocol • Internal grinding spindle • Extensive accessories Please refer to the attached inspection protocol for the machine.

Stav: použitý, TECHNICKÉ ÚDAJE - Vzdialenosť medzi hrotmi: 1000 [mm] - Výška hrotov: 175 [mm] - Nastavenie stola: 9 [stupňov] - Univerzálny držiak brúsneho kotúča – vreteník - Rozmery ľavého brúsneho kotúča: 400 x 50 x 127 [mm] - Výkon motora: 3 [kW] - Otáčky vretena: 1500 / 1700 / 2200 - Nastavenie držáku brúsneho kotúča – vreteníka: 270° (3 x 90 °) - Vnútorný priemer vretena: 90 [mm] - Nastavenie vreteníka obrobku: 180 [stupňov] - Otáčky vretena: 20 – 400 [ot./min.] - Vnútorný kužeľ vretena: Morse 5 - Výkon motora: 0,9 [kW] - Vnútorný kužeľ koníka: Morse 4 - Zdvih pinoly koníka: 30 [mm] - Rozmery: 2860 x 1680 x 1670 [mm] - Hmotnosť stroja: 2500 [kg] PRÍSLUŠENSTVO - Automatický pracovný cyklus (polotovar, dokončenie a spätný pohyb) - Protipodporný hrot Bljdpfx Asxy S A Iodrsc - Nádrž na chladiacu kvapalinu s papierovým filtrom - 1 vreteno na vnútorné brúsenie - 1 držiak diamantu - 2 lunety s dvoma tlačidlami - 1 luneta s tromi tlačidlami - 1 sada unášačov - Rôzne držiaky brúsnych kotúčov

Stav: pripravené na použitie (použité), Starší přesná univerzální bruska na kulato značky Kellenberger včetně příslušenství je k dispozici. Vzdálenost mezi hroty: 200 mm, výška hrotu: 125 mm, maximální hmotnost obrobku: 3 kg, maximální průměr obrobku: 245 mm, maximální délka obrobku: 130 mm. Prohlídka na místě je možná. Blodpfx Adsw Edpgorsc

Stav: použitý, Rok výroby: 2003, Grinding diameter 450 mm Grinding length 1500 mm Centre height 225 mm Photos of a nearly identical machine in 1000 mm version Also geometrically overhauled and partially repainted. 1x Grinding wheel assembly LEFT 500x80x203.2 mm 1x Grinding wheel assembly RIGHT 400x63x127 mm 1x Internal grinding device Ø120 mm for 2 HF spindles (motor and HF spindle) Centre height 225 mm Grinding head motor: drive power 9.2 kW B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35 m/s or 45 m/s, spindle speed adjustment via control (standard) Semi-automatic balancing unit, ELASO, type EB 500 MFV 1230: High-frequency internal grinding spindle with oil-air lubrication High-performance motor spindle M34-FAVY100.R620-20/4, permanent grease lubrication Balancing arbor Operating unit for MFV and MFZ spindles Hydraulic quill retraction for tailstock Micrometric adjustment on tailstock Pneumatic relief for tailstock Tailstock park position Standard workpiece spindle head MK5 CNC-controlled C-axis for standard workpiece spindle head Sine bar for direct angle measurement via gauge blocks Large adjustment swivelling base for standard workpiece spindle head Reinforced workpiece spindle head MK5 CNC-controlled C-axis for reinforced workpiece spindle head Fixed base for reinforced workpiece spindle head Coolant supply through workpiece spindle Dressing device on lower table – with 2x 0053.05 and 2x 0053.20, behind workpiece spindle head and tailstock Dressing device on upper table, with 1x 0053.01, 1x 0053.03, 1x 0053.13 Preparation for later connection of HF dressing device for rotary dressing tools (RENAUD) Adjustment plate for universal use of HF dressing device internal & external KELPOS: Active longitudinal positioning MOVOMATIC GAP: Touch sensor MOVOMATIC Bsdpfx Adexflcrerelc KELSET: Tool measuring system KELSET, MARPOSS 1900 litre endless belt filter with lifting station, 100 l/min at 2.0 bar, prepared for 2 machines Full enclosure Enclosure with service doors left and right Electrical interlock for side door (grinding wheel change) Preparation for customer’s connection of a grinding mist extraction unit Chiller for cooling the H2O circuit (grinding head and HF spindle) Control cabinet lighting with door switch Specification data from delivery note. All data without guarantee.

Stav: použitý, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m As the world’s leading company in the field of Kellenberger overhauls and retrofits, we are not only able to deliver machines in as-new quality with warranty, but can also offer service for your machines: Kellenberger Kel-Varia series with Kelco 90 control system. Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control with BEMA grinding software - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (for B axis) Standard Equipment: - Workheadstock with Morse taper MK5, optional MK5/short taper adapter - Tailstock with MK4 taper. Optionally with fine adjustment - Grinding spindle head T1/T2/T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding attachment, belt-driven by grinding spindle motor - Grinding spindle motor 4.4 kW - High-resolution B axis - Marposs measurement system for grinding wheel measurement - Longitudinal positioning Marposs - GAP control (sensor on the grinding spindle head) ELASO integrated into the control interface - Semi-automatic balancing by ELASO integrated into the control interface - BEMAT grinding wheel measurement Options at additional cost: - HF internal grinding spindle - Ultra-precise, highly torsion-resistant workpiece headstock - Measurement control - Extraction unit - Paper band filter Control: Basic grinding cycles - Workpiece zeroing with Z-position (longitudinal positioning) Bedpfx Ajuwv H Todrelc - Grinding wheel measurement with BEMAT - Infeed sensor GAP - Dressing diamond measurement - Corrections - External and internal cylindrical grinding (plunge and traverse grinding) - External and internal taper grinding (B-axis swiveling, dressing with straight wheel) - External and internal radius grinding (radius dressed on wheel) Optional grinding cycles - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Stav: použitý, Grinding diameter: 350 mm Blsdpfx Aouwv Idjdroc Grinding length: 1,500 mm Centre height: 175 mm Grinding wheel diameter: 500 mm Overhauled according to Kellenberger guidelines, including a new, modern and future-proof control system. New servo motors for the X-axis and for the workpiece spindle head. The photo shows a previously delivered machine in the UR specification. - Operation via touch panel is extremely user-friendly. - The symbolism on the control panel is virtually identical to the original control, so no additional familiarisation is required. - Diagnostic function with PLC message display and digital I/O - Dressing function can be extended or modified as per customer requirements. - Workpiece spindle can be equipped with oriented stop on request. - New maximum infeed rate: 40 mm, can be further increased upon request. - Digital readout on 2 axes. X-axis resolution: 0.5 μm. Options: - Encoder with digital display on the workpiece spindle head - Encoder with digital display on the grinding spindle head (no spindle height adjustment possible) - New, robust internal grinding device, ø 80 mm or 100 mm, with height adjustment - Increase centre height up to max. 225 mm - Grinding spindle speed control Included: - Operating tools - Clamping tube for chuck Further accessories available on request. The machine is equipped with an electronically controlled infeed system in the X-axis, driven by stepper motor. Hydraulic table longitudinal and rapid traverse movement. Versatile applications in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single setup on individual parts. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control Please note: At the current time, this machine does not meet the fundamental safety and protection requirements set out in the German Industrial Safety Regulation (BetrSichV 2015). Determination of the required minimum protection targets must be carried out via a risk assessment in accordance with BetrSichV.

Stav: použitý, Grinding diameter: 350 mm Blodpfsuxft Eex Adrec Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (incremental): 0–9.99 mm / diameter Infeed (continuous): 0–9.99 mm / diameter Table swivelling: ±10° Table longitudinal traverse: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mounting: 80 mm Tailstock quill mounting: MT3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine already delivered with 1000 mm centre distance. - Operation via touch panel is extremely user-friendly. - Symbols on the control panel are almost identical to the original control system, so no additional training is required. - Diagnostic function with display of PLC information and digital I/O - Dressing function can be expanded or modified to customer requirements. - Optional orientated spindle stop on the workpiece spindle available. - New maximum infeed amount of 40 mm, optionally expandable. - Digital display on 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - New heavy-duty internal grinding attachment, diameter 80 mm or 100 mm - Increase centre height up to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available on request. Machine is equipped with an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic table longitudinal and rapid traverse movement. Versatile application in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single setup of individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control Currently, the machine tool does not meet the basic safety and protection requirements as stated in the BetrSichV 2015. A determination of the required minimum protection level must be established through a risk assessment according to BetrSichV.

Stav: použitý, Grinding diameter: 250, 350, 450 mm Grinding length: 1,500 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workhead swivelling range: 360° Grinding spindle head swivelling range: 180° +/- Grinding spindle speed: 1,500, 1,700, 2,200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivel: ±6° Table longitudinal travel: 1,750 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight (chucked): 130 kg incl. clamping fixture Internal spindle fit: 80 mm Total power requirement: 6.5 kW Machine weight approx.: 2.9 t Space requirement approx.: 5.6 x 2.0 m As a world-leading company in the field of Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new quality with warranty, but also offer comprehensive service for your machines. Geometrically overhauled and newly painted, with original electrics but new WSS drive and controller in three-phase technology. Optionally available with splash guard doors and X-axis enclosure. - Digital display in two axes. X-axis resolution 0.5µm Available options at extra charge: - Upper table swivel angle display - Encoder with digital display in the workhead - Encoder with digital display in the grinding spindle head (no vertical adjustment possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increased centre height up to a maximum of 225 mm Includes: Bodpfxjd Ih Dvs Adrslc - Operating tools - Clamping tube for chuck Further accessories available on request. The machine tool does not currently meet the essential safety and protection requirements as specified in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine the necessary minimum safety requirements.