Kellenberger kúpiť použité (75)

Stav: použitý, Grinding diameter: 350 mm Grinding length: 1500 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° +/- Grinding spindle speeds: 1500, 1700, 2200 rpm Infeed per stroke: 0–40 mm/Ø Continuous infeed: 0–40 mm/Ø Table swivelling: ±6.5° Longitudinal table travel: 1530 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. chucking Max. cross travel: 270 mm Internal spindle mount: 80 mm Tailstock sleeve taper: MK3 Sleeve travel: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space required approx.: 4 x 2 m Overhauled to Kellenberger standards Including new, modern, and future-proof CNC control system. Photo shows a previously delivered machine with special options. Rodpfouxftrex Aamjch - Operation via touch panel is exceptionally user-friendly. - The symbols on the control panel are practically identical to the original controls, eliminating the need for retraining. - Diagnostic function with PLC status and digital I/O display. - Dressing function can be expanded or modified upon customer request. - Workpiece spindle stop in angular position available on request. - New maximum infeed amount 40 mm, can be further increased on request. - Digital position display in 2 axes. Resolution X-axis 0.5 μm. Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (height adjustment with the spindle not possible) - New sturdy internal grinding attachment, diameter 80 mm or 100 mm - Increase of centre height to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse movement of the table. Versatile application possibilities in production for external cylindrical and internal grinding, or for external, face, and internal grinding in a single setup of individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Gauging control This machine tool does not currently meet the essential safety and protection requirements as defined in the BetrSichV 2015 workplace safety regulation. The required minimum protection level must be determined through a risk assessment in accordance with BetrSichV.

Rok výroby: 1997, Stav: pripravené na použitie (použité), Hlavný pohon Počet osí: 4 Doplnkové vybavenie Pásový filtračný systém Rcedpfx Aasw Spr Eomeh Táto 4-osá valcová brúska KELLENBERGER Kel-Varia UR 175/1000 bola vyrobená v roku 1997. Je vybavená zariadením na vnútorné brúsenie s naklápateľnou osou B a osou C pre neokruhové brúsenie, doplnená pásovým filtračným systémom. Zvážte možnosť kúpy tejto valcovej brúsky KELLENBERGER Kel-Varia UR 175/1000. Kontaktujte nás pre viac informácií. Typy aplikácií Brúsenie

Stav: generálne opravený (použitý), Rok výroby: 2025, Funkcionalita: plne funkčný, číslo stroja/vozidla: 1315/451, Completely overhauled: Mechanical, geometry, hydraulic, and electrical parts (checked and/or replaced) Wheelhead Disassembled, cleaned, worn and defective parts replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced and adjusted. Newly painted. Workhead Disassembled, cleaned, worn and defective parts replaced, motor overhauled, belts replaced. New spindle bearings. Newly painted. Rcsdpfew U Ry Nox Aamjh Tailstock Disassembled, checked, refurbished. Hydraulics Disassembled, motor checked, hoses and worn or defective parts replaced. Hydraulic block checked. X Axis Disassembled, worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, tables reground. Z Axis Disassembled, tables reground, worn and defective parts replaced, hydraulic piston overhauled, newly painted. Electrical cabinet Fully checked, various relays replaced. Paintwork Colors: White RAL 9003 and Grey RAL 7011. Geometry as per manufacturer protocol. Various accessories checked and cleaned. Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2,200 kg Customs position: 8460.2920 TECHNICAL SPECIFICATIONS Nominal workpiece length between centers: 600 mm Maximum workpiece length between centers (overhanging headstock): 750 mm Center height, standard: 125 mm Center height with interchangeable riser blocks: 175 => 250 mm Max. workpiece diameter (125 mm center height): 250 mm Max. workpiece diameter with riser blocks: 350 => 500 mm Table swivel angle each direction: 10° Maximum length for flat surface grinding (maximum width = 200 mm): 900 mm Continuously variable hydraulic table speed: up to approx. 6 m/min Table reverse dwell time: 0-5 sec. Wheel for external grinding, diameter-width-bore: 400x50x127 mm Wheel for surface grinding: 250x13x76 mm Wheelhead spindle speeds: 1500/1700/2200/3600 rpm Wheelhead swivel: 270° Indexed every 90° Wheelhead vertical travel, center height: 125–350 mm Wheelhead transverse travel: 285 mm Hydraulic rapid infeed and retraction travel: 40 mm Intermittent feed per table reversal: 0.001–0.03 mm/diameter Continuous plunge grinding feed: 0–0.9 mm/diameter Micrometric feed stop, graduation: 0.001 mm/diameter Workhead rotation: 360° Infinitely variable workhead speeds, standard/special rpm: 20–400/10–400 Internal taper of workhead/tailstock: 5/3 Morse Wheelhead motor: approx. 4 HP All technical data are given without engagement and subject to error or omission.

Stav: použitý, stredová výška na kľukovom hriadeli: 125 mm, priemer obrobku medzi hrotmi: 1 300 mm, rozsah otáčania: 9 °, Valcová brúska Kellenberger 51 HU Výška stredu: 125 mm Vzdialenosť medzi hrotmi: 1200 mm Plocha pracovného stola: 1590 x 140 mm Brúsenie plôch: 1300 x 200 mm Pozdĺžny posuv stola, manuálny a automatický: 1300 mm Uhol natáčania stola: 9° Vreteník: Rjdpfx Aajxpif Eemoch Rýchlosti, 5 stupňov: 50–400 ot./min. Natáčanie: 360° Vnútorný kužeľ: MT5 Koník: Vnútorný kužeľ: MT3 Zdvih pinoly: 18 mm Brúska hlava: Priečny posuv: 320 mm Natáčanie: 360° Otáčky vretena, 3 stupne: 2000, 2400 a 3650 ot./min. Brúsny kotúč: 300 x 25 x 127 mm Motor: 3,5 HP Príslušenstvo pre vnútorné brúsenie: Otáčky vretena: 14 000 ot./min. Hmotnosť stroja: 1950 kg Vyžiadajte si cenovú ponuku s dopravou!

Stav: použitý, Rok výroby: 2002, Grinding diameter: 450 mm Grinding length: 1,500 mm Centre height: 225 mm Control: FAGOR EQUIPMENT: - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - T6: Internal grinding attachment - T7: Internal grinding attachment - Spindle motor, water-cooled, 9.8 kW - Marposs tool measuring system - Active longitudinal positioning - Kel-Set - GAP sensor (contactless by ELASO) at T1 and T2, integrated in the control interface - GAP at T3/T4 via fluid sensor - Semi-automatic balancing by ELASO for T1/T2, integrated into the control interface - Tailstock hydraulic, with fine adjustment +/-150 μm - Dressing device on the lower table, workpiece spindle side - Dressing device on the lower table, tailstock side - Dressing device on the upper table - New, service-friendly and operator-friendly enclosure SPECIAL EQUIPMENT: Workpiece spindle headstock with direct drive *Strongly recommended for non-circular grinding *Workpiece weight (chucked): max. 75 kg *Workpiece weight (between centres): 150 kg *Water-cooled *MK5 combined with short taper mounting DIN 55026 *Oriented spindle stop *Fixed lower part B-axis with direct drive, centre height 225 mm *Extremely torsion-resistant *High positioning accuracy *Resolution: ° *Water-cooled MECHANICAL RETROFIT: - Complete overhaul according to Kellenberger measuring protocol - Newly painted Hydraulics unit new: - Improved temperature control (oil cooler) - Energy saving: only one pump, not running continuously - Pressure monitoring - Monitoring of water content in hydrostatic oil (Early detection of bellows damage) Rcsdpfsuxfu Njx Aameh Hydrostatic leadscrew in X: - Wear-free due to no contact during operation - No loss of accuracy, even under continuous full load at max. speed - Frictionless at low speeds - No stick-slip effect at low speeds - Precisely transmits even the smallest rotational movements - No backlash in case of change in rotational direction - No fluctuation in friction torque due to ball circulation - Higher axial rigidity than ball screws - Significantly better damping, leading to improved surface finish and tool life - No vibrations from ball return - Suitable for high speeds and accelerations - Cost-effective alternative to linear motor, higher accuracy, significantly lower heat generation - Significantly lower power loss and no issues with chips sticking to permanent magnets - Much lower cooling capacity needed compared to linear motors ELECTRICAL RETROFIT: - New, modern CNC CYLINDRICAL GRINDING MACHINE controller with BEMA grinding interface - Completely new electrical cabinet - New drive technology - Replacement of all wiring, pressure switches, etc. - New absolute glass scales on X and Z axes - New absolute rotary encoder (for B-axis) CONTROL SYSTEM: The grinding software consists of a base license and various options available depending on the machine's configuration. Software base: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed on wheel) - Semi-automatic oscillation grinding - Workpiece...

Stav: generálne opravený (použitý), Funkcionalita: plne funkčný, číslo stroja/vozidla: 32461/2384, Country of manufacture: Switzerland Voltage: 380 / 50 / 3 Net weight: 2200 kg TECHNICAL DATA Nominal centre distance: 600 mm Maximum centre distance (workpiece spindle head and tailstock extended): 750 mm Standard centre height: 125 mm Centre height with interchangeable intermediate plates (workpiece spindle and tailstock): 175 → 250 mm Maximum possible swing diameter (125 mm centre height): 250 mm Maximum possible swing diameter with intermediate plates: 350 → 500 mm Swivelling range of worktable, each side: 10° Maximum length for surface grinding (table width = 200 mm): 900 mm Table speed, hydraulically infinitely variable: approx. 6 m/min Table reversal delay: 0-5 sec Grinding wheel for cylindrical grinding, diameter x width x bore: 350/400 x 50 max. x 127 mm Grinding wheel for surface grinding, diameter x width x bore: 250 x 13 x 76 mm Grinding spindle speeds: 1500/1700/2200/3600 RPM Swivelling range of grinding spindle head: 270° Locking positions: every 90° Vertical movement of the grinding spindle head, centre height: 125–350 mm Cross movement of the grinding slide: 285 mm Hydraulic rapid advance and return of the grinding slide: 40 mm Infeed per table reversal, stepless: 0.001–0.03 mm/rev Infeed for plunge grinding: 0–0.9 mm/rev Micro stop for infeed per division: 0.001 mm/rev Swivelling range of workpiece spindle head: 360° Workpiece speed, steplessly adjustable, standard/special: 20–400 / 10–400 RPM Internal taper, workpiece spindle/tailstock: Morse 5 / Morse 3 Grinding spindle motor, approx.: 4 HP Errors and omissions excepted. Technical data supplied without obligation. Inventory No. 2170089, Machine Accessories List: 1 workpiece headstock MK5 1 sine bar without comparator Rcsdpsd Amifsfx Aamsh 1 grinding headstock with 4 drive pulleys 1 tailstock MK3 1 collet drawbar system with puller and reducing sleeve B32 1 internal grinding attachment with Fischer UJ50x250 quill – drive pulley Ø 48 for 14000 RPM 1 rotatable wheel dressing unit with 50 mm base 1 table rotation stop without comparator 1 coolant system by decantation 1 ejector 1 balancing bar

Stav: použitý, Priemer brúsenia 350 mm Dĺžka brúsenia 1000 mm Výška hrotov 175 mm Potrebný priestor cca 3,6/3,5 m Ako celosvetovo vedúca spoločnosť v oblasti generálnych opráv/retrofitov Kellenberger zabezpečujeme nielen dodávky strojov v kvalite nového stroja so zárukou, ale ponúkame aj servis pre Vaše stroje: Rcedpjuwv H Hjfx Aameh Rad Kellenberger Kel-Varia so systémom riadenia Kelco 90. Mechanická generálna oprava: - Kompletná generálna oprava stroja podľa testovacieho protokolu Kellenberger - Nová servisne priateľská kabína - Nové lakovanie Elektrická generálna oprava: - Nové, moderné CNC ovládanie brúsok na guľato s rozhraním BEMA - Nový rozvádzač - Nová pohonná technika - Výmena všetkých elektrických vedení, tlakových spínačov Berus atď. - Nové absolútne sklenené odmeriavacie pravítka v osiach X a Z - Nový absolútny rotačný snímač (pre B-os) Štandardná výbava: - Pevný koník s kužeľom MK5, voliteľne s adaptérom MK5/krátky kužeľ - Otočný koník s kužeľom MK4, voliteľne s jemným nastavením - Brúsne vretená T1/T2/T3 - T1 - priemer brúsneho kotúča 400 mm - T2 - priemer brúsneho kotúča 300 mm - T3 - zariadenie na vnútorné brúsenie, pohon cez brúsny motor remenom - Brúsny motor 4,4 kW - B-os s vysokým rozlíšením - Merací systém Marposs pre meranie brúsnych kotúčov - Pozdĺžne polohovanie Marposs - GAP Control (senzor na brúsnom vretene) ELASO integrované do systému riadenia - Polautomatické vyvažovanie ELASO integrované do systému riadenia - BEMAT meranie brúsnych kotúčov Voliteľná výbava za príplatok: - Vysokofrekvenčné vnútorné brúsne vreteno - Vysoko presný, maximálne tuhostný vreteník obrobku - Merací riadiaci systém - Odsávanie - Pásový papierový filter Ovládanie: Základné brúsne cykly: - Nulovanie obrobku s pozíciou Z (pozdĺžne polohovanie) - Meranie brúsneho kotúča s BEMAT - Senzor priblíženia GAP - Meranie diamantov na orovnávanie - Korekcie - Vonkajšie a vnútorné valcové brúsenie (kyvné a priečne brúsenie) - Vonkajšie a vnútorné kužeľové brúsenie (naklápanie B-osy, orovnávanie s rovným kotúčom) - Vonkajšie a vnútorné rádiusové brúsenie (rádius orovnaný na kotúči) Voliteľné brúsne cykly: - Profilové priečne brúsenie vonkajšie a vnútorné s profilovým kotúčom - Profilové brúsenie vonkajšie a vnútorné s rovným kotúčom - Jedno a viacchodové vonkajšie a vnútorné závitové brúsenie s voľne voliteľným uhlom bokov - Brúsenie trapézových závitov - Neokrúhle/brúsenie mimo osy vonkajšie a vnútorné Cena 15 000 €

Stav: dobrý (použitý), Rok výroby: 1999, prevádzkové hodiny: 16 000 h, Funkcionalita: plne funkčný, číslo stroja/vozidla: 650341, Rok výroby 1999 s Fanuc 18 TB – 3 osy XZB Marposs E30/E20 Země původu výroby: Švýcarsko Napětí: 400V/50Hz/3fáze Rozměry: 410x220x190 cm Čistá hmotnost stroje: 5 000 kg TECHNICKÉ PARAMETRY CNC řízení: Fanuc 18TB Středová část Pevná středová část: brusná hlava R Otočná část s ruční indexací po 2,5°: R / RS / UR / URS -210° až +30° Otočná část s automatickou indexací po 2,5°: R / RS / UR / URS -210° až +30° Osa B, rozlišení 0,1’’: R / RS / UR / URS -210° až +30° Standardní upínací vřeteno (poupée porte-pièce) Rozsah natočení: -10° až +100° Otáčky vřetene (plynulé): 6 – 600 min⁻¹ Upínací kužel vnitřní: Morse kužel 5 (MK5) Redukční pouzdro: MK5/MK4 Vnější krátký upínací kužel: DIN 55026 / Gr.5 Přípustný moment: 160 Nm Rcodpfxow T Tb He Aamoh Zajištěná kruhovitost pro upínání v čelistech: Standard: 0,5 µm Volitelné: 0,2 µm Hmotnost obrobku mezi hroty: 150 kg Kontrvřeteno (contre-poupée) Upínací kužel: MK4 Zdvih pinoly: 50 mm / 2° Volitelné: mikrometrický posuv s korekcí (Ø +/- 150 µm) Údaje o kotouči Průměr 300 mm: 27 m/s Průměr 400 mm: 35 m/s Průměr 500 mm: 45 m/s Brusná hlava UR Výkon: 9,2 kW / 12,5 HP Montáž kotouče vlevo max.: Ø 500 x 80 mm Přídavný vpravo max.: Ø 400 x 63 mm Zařízení pro vnitřní broušení: vřeteno HJN 828 Dolní stůl (osa Z) Vzdálenost mezi hroty: 1 000 mm Maximální pojezd: 1 150 mm Maximální rychlost: 15 m/min Maximální rozlišení: 0,1 µm Horní stůl Vzdálenost mezi hroty: 1 000 mm, natočení 0° až 9° Brusný suport (osa X) Maximální pojezd: 320 mm Maximální rychlost: 7,5 m/min Maximální rozlišení: 0,1 µm Pneumatika Minimální připojení: 6 bar Spotřeba vzduchu: cca 0,6 m³/h Chladicí kapalina Maximální vstupní tlak: 3 bar Požadovaný prostor (verze 1000): 3 600 x 2 000 mm Technické údaje jsou uvedeny bez záruky na přesnost a úplnost.

Stav: použitý, Rok výroby: 2005, Grinding diameter 500 mm Grinding length 1500 mm Centre height 250 mm Control system: GRINDplusIT Machine will be partially overhauled with measurement protocol and warranty Delivery within Germany and neighbouring countries. 1 x UR-RS 175 / 1500 Standard version (T1, T2, T5, T7) 1 x Grinding wheel assembly T1 400x63x127mm 1 x Grinding wheel assembly T2 400x63x127mm 1 x Grinding wheel assembly T5 400x63x127mm 1 x Internal grinding device T7 0120 mm for HF spindles 1 x Centre height 250 mm 2 x Grinding head motor: drive power 10.0 kW 1 x CNC control Heidenhain GRINDplusIT Rcodswulrhspfx Aamoh 1 x Kel-ASSIST 100 PLUS (includes Kel-Assist 100 and thread calculation) 1 x KEL-POLY, non-circular grinding 1 x KEL-NET for CNC control GRINDplusIT 1 x B-AXIS GRINDplusIT: CNC-controlled B-axis (standard) 1 x GRINDplusIT: v constant 35m/s or 45m/s_Adjustment of grinding spindle via control 1 x T1, T2, T5, T7: T1 and T2: v=constant, T5: v=variable (Danfoss), T7: HF spindle 1 x Operating unit for 1x MFM or MFV spindle, VACON 22 kW 1 x HF internal grinding spindle Fischer MFM 1224/42/31 right, HJND 21 1 x HF internal grinding spindle Fischer MFV 1260/4 right 1 x HF internal grinding spindle IBAG HF 33 S 60 P 1 x Tailstock with manual retraction 1 x MICRO ADJUSTMENT: Tailstock lower part with micro adjustment 1 x Spring-loaded quill insert 1 x Pneumatic relief for tailstock 1 x Upper table flooding (standard) 1 x Workpiece headstock reinforced, MK 5 DIN 55026 size 5" 1 x C-AXIS: CNC-controlled C-axis for reinforced workpiece headstock 1 x Fixed base for reinforced workpiece headstock 1 x KELPOS: Active longitudinal positioning MOVOMATIC, mounted on grinding head 1 x Diameter probe Movomatic; DU200 1 x Measurement control unit Movomatic ES124 / digital 1 x KELSET: Tool measurement system KELSET, MARPOSS 1 x Basic module for KEL-TOUCH infeed sensor and KEL-BALANCE balancing system 1 x KEL-TOUCH, infeed sensor for diagonal/tandem 1 x Full enclosure for emulsion 1 x Coolant cleaning pistol connected to the table 1 x Grinding mist extraction system for emulsion 1 x Lubricant for first fill HF dressing device type IBAG on OT Data refer to delivery condition without guarantee.

Stav: použitý, Rok výroby: 1982, Brúsny priemer 630 mm Brúsna dĺžka 600 mm Výška hrotu 320 mm Stroj so zosilneným vretenníkom na obrobky na vyložené brúsenie ťažkých obrobkov. Stroj prechádza veľkou údržbou/čiastočnou generálnou opravou vrátane geometrického protokolu podľa smerníc pre nové stroje Kellenberger. Obrábací stroj v súčasnosti nespĺňa základné požiadavky na bezpečnosť a ochranu, ako je uvedené v BetrSichV 2015. Stanovenie požadovaného minimálneho cieľa ochrany sa určuje prostredníctvom posúdenia rizika podľa BetrSichV. Redpfx Ajv Dxxzsamsch

Stav: použitý, Grinding diameter 250, 350, 450 mm Grinding length 1000 mm Center height 125, 175, 225 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swiveling 360° Grinding spindle head swiveling 180 + - ° Grinding spindle speed 1500, 1700, 2200 rpm Plunge (per stroke) 0.001–0.030 mm/Ø Continuous infeed 0–0.95 mm/Ø Table swiveling ±8° Table longitudinal travel 1300 mm Table speed 0.02–6 m/min Workpiece weight between centers 130 kg Workpiece weight max. (overhung) 130 kg incl. clamping equipment Internal spindle mount 70 mm Total power requirement 6.5 kW Machine weight approx. 2.5 t Space requirement approx. 4.2 x 2.0 m As the world's leading company in the field of Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new condition and with warranty, but can also provide service for your machines—recently delivered equipment supplemented with additional options such as: - Splash guard doors - X-axis enclosure - Grinding spindle head swivel angle indicator Available at a surcharge. Geometrically overhauled and newly painted with original electrics. The machine is equipped as standard with central lubrication and roller guide in the X-axis flat slideway as well as air lift-off in the grinding spindle head. - Digital display in 2 axes. X-axis resolution 0.5 μm Options: - Rotary encoder with digital display for the workpiece spindle head Redpfx Aasuxftxjmech - Rotary encoder with digital display for the grinding spindle head (no height adjustment with spindle possible) - New heavy-duty internal grinding unit, diameter 80 mm or 100 mm, with height adjustment - Increase in center height to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories on request. The machine tool does not currently meet the fundamental safety and protection requirements specified in BetrSichV 2015. Raising the required minimum protection level must be established by means of a risk assessment in accordance with BetrSichV.

Stav: použitý, Grinding diameter: 350 mm Grinding length: 1500 mm Centre height: 175 mm Machine weight approx. 3 t High-end Kellenberger 1500U Ideal for spindle manufacturers or spindle refurbishers - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor electrically interlocked! Internal grinding spindle can only be switched on when in position Redpfxet Ii Rre Aamoch A quantum leap in terms of safety - Infinitely variable grinding spindle speed: 1000-1500 rpm - Infinitely variable internal grinding spindle speed: 0-100% - Digital display of spindle speeds - Swivel angle indicator for upper table - Swivel angle indicator for grinding spindle headstock - Marposs contact sensor for external grinding only - Marposs fluid touch sensor for internal grinding - Centre height up to 250 mm possible Machine is already delivered. Identical machine can be built with additional options. The machine tool currently does not comply with the essential health and safety requirements as stipulated in the BetrSichV 2015 regulations. The achievement of the required minimum safety standards must be determined by means of a risk assessment in accordance with BetrSichV.

Stav: použitý, Rok výroby: 1982, Grinding diameter 630 mm Rcodpovq R Uzjfx Aamoh Grinding length 600 mm Centre height 320 mm Machine has been overhauled according to Kellenberger test protocol and freshly repainted. The susceptible Güttinger control system has been replaced by the modern BEMA X control system. This means the machine also received a completely new electrical system as part of the upgrade. Machine equipped with reinforced workpiece spindle stock for plunge grinding of heavy workpieces. The machine does not currently comply with the essential safety and protection requirements as specified in the BetrSichV 2015. Raising the required minimum safety standard must be determined by a risk assessment in accordance with BetrSichV.

Stav: použitý, Grinding diameter: 350, 450 mm Grinding length: 600 mm Centre height: 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20-400 rpm Workpiece headstock swivels: 360° Grinding head swivels: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001-0.030 mm/Ø Continuous infeed: 0-0.95 mm/Ø Table swivels: ±10° Table longitudinal travel: 900 mm Table speed: 0.02-6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (flying): 130 kg including chucking system Internal spindle bore: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Required space approx.: 3.1 x 2.0 m As a global leader in Kellenberger overhauls and retrofits, we are not only able to deliver machines in like-new condition with warranty, but also offer overhaul and repainting services for your machines in metric execution. Photo shows a previously delivered machine, possibly with different options. The machine is equipped as standard with central lubrication and roller guideways in the flat bed of the X-axis, as well as air lift-off in the grinding headstock. BEMA standard equipment includes: - Digital read-out in 2 axes. X-axis resolution: 0.5 µm - Spindle speed display for grinding spindle - Infinitely variable speed control for grinding spindle (70-100%) - Infinitely variable speed control for internal grinding spindle (70-100%) - Workpiece spindle drive by three-phase motor, continuously variable via frequency converter Optional extras (at additional cost): - Rotary encoder with digital display in workpiece headstock - Rotary encoder with digital display in grinding headstock (no height adjustment possible with spindle) Rjdpfx Aed Ih D Eeamoch - Sine bar - New robust internal grinding attachment (80 mm or 100 mm diameter), with height adjustment - Increase in centre height to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Of course, all of our completely refurbished machines come with a 12-month warranty (valid only in neighbouring countries). Further accessories available on request. Please note: At present, the machine tool does not meet the fundamental safety and protection requirements as described in the BetrSichV 2015. The increase of the required minimum safety standard must be determined by a risk assessment in accordance with BetrSichV.

Stav: použitý, Grinding diameter: 250 mm Grinding length: 1000 mm Centre height: 125 mm Grinding wheel diameter: 500 mm Grinding wheel width: 80 (100) mm Bore: 203.2 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece spindle head swivels: +/- 360° Grinding spindle head swivels: +/- 0° Incremental infeed per stroke: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Rcjdpfx Aaod Ih Egsmoh Table swivels: +/- 10° Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight (between centres, including clamping): 130 kg Cross traverse: 270 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total connected load: 5.5–7.5 kW Machine weight approx.: 2.7 t As the worldwide market leader in Kellenberger overhaul / retrofit, we are not only able to deliver machines in like-new condition with warranty, but also offer service for your machines. Geometrically overhauled and newly painted according to Kellenberger measuring protocol. Completely new electrical system with new infeed control. Photos show a previously delivered machine of the same design, but with 1500 mm centre distance and a universal grinding head instead of a head with 500 mm wheel, intended for external cylindrical grinding only. Equipment: - 2-axis digital readout - New DGS paper band filter Optional at surcharge: - Semi-automatic dressing - Dressing size compensation - GAP control - Measurement automation - Safety doors Electronically controlled infeed system with stepper motor drive. Hydraulic table traverse and rapid traverse. Powerful, non-swivelling grinding spindle head for production external cylindrical grinding. Applications: Machining of high-precision components in the gearbox, machine tool, and general mechanical engineering industries. Mating/grinding pairs for the hydraulics industry. At present, the machine tool does not conform to the fundamental safety and protection requirements as specified in the 2015 German Industrial Safety Regulation (BetrSichV). The necessary minimum safety target must be determined by a risk assessment according to BetrSichV.

Stav: použitý, Rok výroby: 2010, Brúsny priemer: 350 mm Brúsna dĺžka: 1000 mm Výška hrotu: 175 mm Riadenie: Fanuc 310is Kompletne mechanicky repasovaný. Vrátane brúsneho procesu a nastavenia na jeden kus. Originálna fotografia stroja z výstavy EMO 2010. CNC riadenie GE Fanuc 310is Ručný panel pre CNC riadenie GE Fanuc S Wenger podávačom Otočný diel s automatickým indexovaním po 1° Brúsna hlava UR 1-2-3 Brúsny kotúč vľavo 500 x 80 mm Brúsny kotúč vpravo 400 x 63 mm Prevádzková jednotka pre vysokofrekvenčné vnútorné brúsne vreteno MFV / MFZ Vysokofrekvenčné vnútorné brúsne vreteno MFN 1090 Chladenie cez vreteno obrobku Zariadenie na orovnanie na hornom stole Otočný držiak pre PKD diamantové platne Základný modul pre KEL-TOUCH snímač kontaktu nástroja a KEL-BALANCE vyvažovaciu jednotku KEL-TOUCH snímač pre univerzálne varianty brúsnej hlavy R / RS / UR / URS KEL-TOUCH na hlavnom vretene pre vnútorné a vonkajšie brúsenie Príprava pre meracie ústrojenstvá Movomatic ESZ 400 alebo Marposs P7 ME Rsdpfxjvdk N Ee Aamoch Príprava pre externý filter Vypínanie chladiva pre stolové zariadenia Plné opláštenie pre emulziu Odsávacie zariadenie na brúsny hmlový emulzia Servisná jednotka pre pneumatické prídavné funkcie Príprava pre nakladač portálu KEL-VITA KEL-POS, MOVOMATIC: Merací snímač C25 Hydraulická príprava pre lunetu Arobo

Stav: použitý, Brúsny priemer 250, 350, 450 mm Brúsna dĺžka 1000 mm Výška hrotu 125, 175, 225 mm Priemer brúsneho kotúča 400 mm Šírka brúsneho kotúča 50 mm Otvor (upnutie kotúča) 127 mm Kužel vretien na obrobok MK5 Otáčky vretena na obrobok 20-400 min⁻¹ Vreteno na obrobok otočné 360° Brúsny vreteník otočný 180° ± Otáčky brúsneho vretena 1500, 1700, 2200 min⁻¹ Prísuv (prerušovaný) 0,001-0,030 mm/Ø Prísuv (spojitý) 0-0,95 mm/Ø Stôl otočný ±8° Pozdĺžny pohyb stola 1300 mm Rýchlosť stola 0,02-6 m/min Hmotnosť obrobku medzi hrotmi 130 kg Max. hmotnosť obrobku na konzolu 130 kg vrátane upnutia Vnútorný otvor vretena 70 mm Rcedpfev I Eq Sex Aamsh Celkový príkon 6,5 kW Hmotnosť stroja cca 2,5 t Pôdorys cca 4,2 x 2,0 m Okamžite k dodaniu, samozrejme s 12-mesačnou zárukou! Geometricky repasovaný a novo lakovaný s novou elektroinštaláciou. V KELLENBERGER kvalite! - Digitálny odpočet v 2 osiach. Rozlíšenie os X 0,5 µm - Moderný vretenník na obrobok s kužeľom MK5 - Moderný koník s kužeľom MK3 - Moderná hydraulická jednotka - Papierový pásový filter Ďalšie príslušenstvo na požiadanie Stroj v súčasnosti nespĺňa základné bezpečnostné a ochranné požiadavky uvedené v BetrSichV 2015. Určenie požadovaného minimálneho bezpečnostného cieľa je potrebné stanoviť posúdením rizík podľa BetrSichV.

Stav: použitý, Rok výroby: 1978, Grinding diameter: 500 mm Grinding length: 500 mm Centre height: 250 mm The URF model is designed for both single-part and series production of high-precision workpieces mounted in a chuck, on a faceplate, or on a magnetic chuck, with a maximum load capacity of 330 Nm including clamping equipment. This machine type is characterized by its compact and robust design, ease of operation, and high versatility, as well as short setup times for external, face, and internal grinding operations. Applications: - Toolmaking - Mold making - Gauge making External grinding wheel diameter: 400 mm Face grinding wheel diameter: 225 mm Internal grinding attachment for spindle diameter: 70 mm (80 mm available on request) The machine has been completely overhauled: - New control cabinet - Modern hydraulic unit - Reinforced workpiece spindle stock (see photo) - 2-axis digital readout (Fagor) - Sine bar for precise adjustment of the swivel angle Photos show the current refurbishment status. Delivery time approx. 3 weeks from order. Rcjdpfx Aevx Dvnoamsh

Stav: použitý, Rok výroby: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos show an identical machine with a centre height of 225 mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Standard Equipment: - T1 500 mm grinding wheel diameter - T2 400 mm grinding wheel diameter - B-axis infinitely variable, high-resolution - Marposs measuring device for tool measurement - Active longitudinal positioning - GAP monitoring for T1 and T2 from ELASO, contactless, integrated in the control interface - Semi-automatic balancing from ELASO integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mounting DIN 55026 - Internal grinding device, belt-driven Options at extra charge: - New high-precision workpiece spindle head with torque drive - Internal grinding device for high-frequency spindles, diameter 120 mm - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm, with integrated GAP sensor (delivery time required) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic ballscrew on X-axis - New hydrostatic system with only one pump and accumulator for improved energy efficiency - Monitoring of the water content in the hydrostatic system - Extraction unit Other options available on request Mechanical Overhaul: - Complete overhaul of the machine according to Kellenberger measurement protocol - New, service-friendly machine enclosure - New paintwork Electrical Overhaul: - New, modern CNC CYLINDRICAL GRINDING MACHINE control system with BEMA cylindrical grinding interface - Newly built switch cabinet - New drive technology - Replacement of all electrical cables, pressure switches, etc. - New absolute glass scales on X and Z axes - New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a basic license and various options depending on the machine’s configuration. Software Basic - External and internal longitudinal grinding - External and internal plunge grinding Redpjuxfucefx Aamsch - External and internal face longitudinal grinding - External and internal face plunge grinding - External and internal taper longitudinal grinding - External and internal radius grinding, radius dressed onto the wheel - Semi-automatic longitudinal grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 form diamonds - 1 form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measuring (probe required) - GAP measurement (pre-grinding device required) OPTIONS at extra charge: Software Profile Plunge Grinding: - External and internal profile plunge grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single and multi-start external and internal thread grinding with thread dressed onto the wheel. Dressing of single and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular longitudinal grinding Software Non-circular Grinding: For non-circular grinding, the workpiece axis must be equipped with a high-resolution encoder in order to operate the axis as a C-axis. The non-circula

Stav: použitý, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivel range: 360° Grinding headstock swivel range: 180 ±° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed per stroke: 0–9.99 mm/Ø Continuous feed: 0–9.99 mm/Ø Table swivel: ±8° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Cross travel max.: 270 mm Max. workpiece weight (unsupported): 130 kg including clamping Internal spindle mount: 80 mm Tailstock quill taper: MT3 Quill stroke: 30 mm Power requirement: approx. 6.5 kW Machine weight: approx. 3.05 t Space required: approx. 4 x 2 m Overhauled according to Kellenberger guidelines, including a new, modern, and future-ready control system. Photo shows a previously delivered machine. Rcodpfjuxfupox Aamjh - Operation via touch panel is extremely user-friendly. - The symbols on the control panel are practically identical to the original controls, so no retraining is necessary. - Diagnostic functions with PLC indications and digital I/O display. - Dressing functions can be expanded or modified to customer specifications. - Spindle orientation stop for the workpiece spindle available upon request. - New maximum infeed: 40 mm, expandable upon request. - Digital readout on two axes. X-axis resolution: 0.5 μm. Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - New robust internal grinding device, diameter 80 mm or 100 mm - Increased centre height up to max. 225 mm - Variable speed control for grinding spindle Included: - Operating tools - Clamping sleeve for chuck Further accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse table feed. Versatile applications in production for external cylindrical and internal grinding or for external, face, and internal grinding in a single setup of individual parts. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control Current safety compliance: The machine tool does not currently meet the fundamental safety and protective requirements as specified in the German Industrial Safety Regulation (BetrSichV 2015). The required minimum safety level must be determined by a risk assessment in accordance with BetrSichV.

Stav: použitý, Rok výroby: 2006, Brúsny priemer 350 mm Brúsna dĺžka 1000 mm Výška hrotov 175 mm Hmotnosť stroja cca 3,5 t Stroj kompletne generálne opravený v štýle BEMA s 12-mesačnou zárukou Mechanicky a vizuálne ako nový Rcjdpot Ii Nbsfx Aamoh Fotografia novo dokončeného stroja s čiastočne inými možnosťami výbavy. Ovládanie Fanuc 21i -Brúsna hlava UR 1-2-3 vonkajšie/vnútorné/čelné brúsenie -B-os automaticky 1° Hirth ozubenie -Aktívne pozdĺžne polohovanie KEL-POS Movomatic -Polautomatické vyvažovacie zariadenie KEL-BALANCE -Pravé brúsne koleso s priemerom 400 mm -Ľavé brúsne koleso s priemerom 300 mm -Zariadenie na vnútorné brúsenie s remeňovým pohonom -Koník s mikro-nastavením -Jemné nastavenie horného stola -Pásový papierový filter SBP4 240 l

Stav: použitý, Priemer brúsenia: 250, 350, 450 mm Dĺžka brúsenia: 1000 mm Výška hrotov: 125, 175, 225 mm Priemer brúsneho kotúča: 400 mm Šírka brúsneho kotúča: 50 mm Priemer upnutia (otvor): 127 mm Kužel vretena obrobku: MK5 Redpfst Ii Nujx Aamsch Otáčky vretena obrobku: 20–400 ot./min Vreteník obrobku otočný: 360° Vreteník brúsneho vretena otočný: 180° ± Otáčky brúsneho vretena: 1500, 1700, 2200 ot./min Prísuv po zdvihu: 0,001–0,030 mm/Ø Priebežný prísuv: 0–0,95 mm/Ø Stôl otočný: ±8° Pozdĺžny pohyb stola: 1300 mm Rýchlosť stola: 0,02–6 m/min Hmotnosť obrobku medzi hrotmi: 130 kg Max. hmotnosť obrobku – letmo: 130 kg (vrátane upnutia) Vnútorný upínací priemer vretena: 70 mm Celkový príkon: 6,5 kW Hmotnosť stroja cca: 2,5 t Pôdorysný rozmer cca: 4,2 × 2,0 m Ako svetový líder v oblasti repasovania/modernizácie Kellenberger strojov zabezpečujeme nielen dodávky strojov v kvalite nových strojov so zárukou, ale aj servis pre Vaše zariadenia. Geometricky repasované a nanovo lakované s originálnou elektronikou. Fotografia znázorňuje typ 600U nedávno dodaný zákazníkovi. -Digitálny odpočet v 2 osiach. Rozlíšenie os x: 0,5 μm Možnosti: -Elektronický odčitávač otočiek vo vretene obrobku s digitálnym displejom -Elektronický odčitávač otočiek v brúsnom vretene s digitálnym displejom (nie je možná výšková regulácia cez vreteno) -Nové robustné vnútorné brúsne zariadenie s priemerom 80 mm alebo 100 mm s nastavením výšky -Zvýšenie výšky hrotov až na max. 225 mm -Regulácia otáčok brúsneho vretena Vrátane: -Obslužné náradie -Upínacia trubica pre skľučovadlo Ďalšie príslušenstvo na požiadanie. Táto obrábacie stroj momentálne nespĺňa základné bezpečnostné a ochranné požiadavky podľa BetrSichV 2015. Splnenie požadovaných minimálnych cieľov ochrany je potrebné stanoviť prostredníctvom posúdenia rizika podľa BetrSichV.

Stav: použitý, Grinding diameter 350 mm Rjdpfx Aaet Ii Rfsmech Grinding length 1500 mm Centre height 175 mm Left wheel 600 mm Grinding spindle headstock fixed, not swivelling. Equipped with new FAGOR control system and BEMA cylindrical grinding software. Fitted with a new, maintenance-friendly enclosure. Completely overhauled according to Kellenberger measurement protocol.

Stav: použitý, Grinding diameter: 250 mm Grinding length: 600 mm Centre height: 125 mm Grinding wheel diameter: 500 mm Grinding wheel width: 80 (100) mm Bore: 203.2 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: +/- 360° Grinding headstock swivelling: +/- 0° Infeed stepwise: 0–9.99 mm/diameter Infeed continuous: 0–9.99 mm/diameter Table swivel: +/- 10° Table longitudinal travel: 700 mm Table feed speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight – overhung: 130 kg incl. clamping Cross travel: 270 mm Tailstock quill taper: MT3 Quill travel: 30 mm Total power required: 5.5–7.5 kW Machine weight approx.: 2.7 t As the global leader in Kellenberger overhaul/retrofit, we are not only able to deliver machines in new-machine quality with warranty, but can also offer you service for your machines. Overhauled according to Kellenberger guidelines, including new, modern, and future-proof control system. Photo shows a machine already delivered. Redpfjd Ih Ehox Aamjch - The touch-panel operation is extremely user-friendly. - The symbols on the control panel are virtually identical to those on the original system, so no retraining is required. - Diagnostic functions provide SPS messages and digital I/O display. - Dressing function can be upgraded or customised as per customer requirements. - Oriented spindle stop for the workpiece spindle available upon request. - New maximum infeed amount: 40 mm, expandable on request. - Digital readout in 2 axes. X-axis resolution: 0.5 µm. Options: - Rotary encoder with digital readout on the workpiece headstock - Rotary encoder with digital readout on the grinding headstock (no height adjustment possible with spindle) - New stable internal grinding device with diameter 80 mm or 100 mm, including height adjustment - Increase of centre height up to a max. of 225 mm - Speed control for grinding spindle Included: - New DGS paper band filter - Operating tools - Clamping sleeve for chuck Additional accessories available upon request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile use in production for external and internal cylindrical grinding, or for simultaneous external, face, and internal grinding in one setup for single parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control Please note: The machine tool does not currently meet the fundamental safety and protection requirements as specified by BetrSichV 2015 (German Operational Safety Ordinance). A risk assessment in accordance with BetrSichV must be carried out to determine an increase of the required minimum protection target.

Stav: použitý, Rok výroby: 1986, Brúsny priemer: 350 mm Brúsna dĺžka: 600 mm Výška hrotu: 175 mm Veľmi udržiavaný stroj. Redpfx Aasv Tqqnemjch Stroj pochádza z presnej brúsiarne v Čiernom lese. Stroj je ešte krátku dobu prístupný pod napätím u pôvodného majiteľa. V roku 2022 bol stroj v našej firme čiastočne generálne opravený a servisovaný s nastavením geometrie podľa protokolu výrobcu. Výbava: - 2-osý digitálny odpočet FAGOR - sinusové pravítko - koník s jemným nastavením - hydraulický koník - prístroj na rovinné brúsenie - zariadenie na vnútorné brúsenie - vnútorné brúsiace vreteno Fischer UJ70 - papierový pásový filter - automatický cyklus: hrubovanie - jemné brúsenie - iskrenie - spiatočný návrat