Plasma Prof 70 kúpiť použité (14 889)

Stav: použitý, Rok výroby: 2018, Used machine Year of manufacture: 2018 Special feature: Machine suitable for edge heights up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 support rollers for improved workpiece guidance - Edge infeed synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edge material) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber coating - Digital counter for height adjustment - Direct glue application to the workpiece: Leak-proof glue pot with reserve supply from below and fast heat-up time after machine stop Cgodpswka S Ijfx Ad Iow - End trimming unit: - For front and rear edges of the workpiece - Automatic scanning on the workpiece - Pneumatic trimming with knife for cuttable edges - Flush-milling unit: - With vertical sensing and horizontal guidance - Repeatable settings via digital counters - Two powerful 0.4 kW high-frequency motors - Infinitely variable speed from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - Central extraction port Ø 100 mm - Two chip extraction hoods with Ø 60 mm hoses - Automatic height adjustment of the upper milling cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Extendable workpiece support rail, approx. 300 mm - Rotatable film plate Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film plate): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Stav: použitý, Rok výroby: 2013, Used machine Year of manufacture: 2013 Very well-maintained machine Features: - Machine table with 13 rollers for improved workpiece guidance Codpjzc Agksfx Ad Ijgw - Edge feed, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber coating. Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue reservoir from below and quick heat-up time after machine downtime - End trimming unit for workpiece front and rear edges, automatic tracing on the workpiece, pneumatic trimming with knife for cuttable edges - Flush milling unit with vertical tracing and horizontal guidance, reproducible settings via digital counters, two powerful 0.4 kW high-frequency motors, infinitely variable from 4000 to 18000 rpm, cutters Ø 70 mm, Z4, radius 2 mm/15°; central extraction port Ø 100 mm, two chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail, extendable by approx. 300 mm - Rotatable film tray Ø 800 mm Technical specifications: - Workpiece width min. approx. 80 mm - Workpiece thickness 10 – 50 mm - Workpiece length min. approx. 220 mm - Edge thickness 0.4 – 2.0 mm - Roller separation max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity 2.7 kW - Electrical connection 400V, 50 Hz, 3-phase + N - Total connected load 3.8 kW - Heat-up time approx. 10 minutes - Pneumatic connection 6 bar - Working height approx. 880 mm - Dimensions approx. 1800 x 700 x 1300 mm (without film tray Ø 800) - Net weight approx. 260 kg Availability: short-term Location: Flörsheim

Stav: použitý, Rok výroby: 1993, Použitý stroj Rok výroby: 1993 Stolový stroj Cikcaková niť používaná ako lepiace médium je nalepená zo spodnej strany Automatické vyrovnanie hrúbky a tolerancií pre zmerané dyhy Dyha od cca 120 mm dĺžky, 35 mm šírky a hrúbky 0,3 - 2 mm Elektrické pripojenie: 230 V Vyloženie stojana: 700 mm Posuv materiálu cca 6 m/min. Hmotnosť cca 54 kg Dostupnosť: krátkodobá Cgjdpfx Aow I Ur Nsd Iow Skladové miesto: Flörsheim

Stav: použitý, Type: CS-70/900 CTS climate test chamber with humidity, water-cooled (has been converted to R-452a) Temperature range: -70 °C to +180°C Cgsdpfxjziizte Ad Iow Humidity range: 10–98% r.h. Test chamber dimensions: Height approx. 870 mm / Width approx. 1000 mm / Depth approx. 1000 mm External dimensions: Height approx. 1950 mm / Width approx. 1200 mm / Depth approx. 2220 mm Control cabinet: Height approx. 2100 mm / Width approx. 800 mm / Depth approx. 400 mm Test chamber volume: 900 liters Refrigerants: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50Hz Connected load: 21.2 kW, Rated current: 35.7 A Climate test chamber weight: 900 kg Control cabinet weight: 150 kg For your safety as the buyer, please take note of the following information! The following points are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful checking, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Stav: veľmi dobrý (použitý), Vötsch Typ: VTS 7018-5 Water-cooled temperature test chamber System retrofitted for R-452A Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate cooling: 7.5 K/min Temperature change rate heating: 7.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: width 580 mm, depth 450 mm, height 750 mm External dimensions: width 870 mm, depth 1280 mm, height 1575 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10.0 kW Rated current: 21 A Fuse, on-site: 32 A slow-blow Sound level at 1m distance (free-field measurement): < 69 dB(A) Side port: 50 cm / 125 cm Cgsdpsziixxsfx Ad Ijw Chamber is water-cooled Refrigerants: R-452A and R 23 Weight: approx. 460 kg For your safety as the buyer, please note the following information! The following points are carried out on our offered chambers prior to delivery: 1. Functional inspection and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to modification and errors!) Should you have any further questions, we are happy to assist you by phone.

Stav: veľmi dobrý (použitý), Heraeus Vötsch Model: VT 7021 Temperature Test Chamber, Air-Cooled 1 port, nominal width 80 mm Test chamber volume: 210 liters Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Rate of temperature change (heating): 2.5 K/min Rate of temperature change (cooling): 2.5 K/min Maximum heat compensation: 800 W Test chamber dimensions: width 560 mm, depth 570 mm, height 630 mm External dimensions: width 850 mm, depth 1250 mm, height 1640 mm Electrical connection: 1/NPE AC 230 V ± 10% 50 Hz Rated power approx. 1.8 kW, rated current 12 A Refrigerant: R404A and R23 Cgedpfx Ajziiw Ied Ijw Weight: 355 kg Important safety information for you as the buyer! The following points are performed in advance on our chambers on offer: 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Stav: veľmi dobrý (použitý), Weiss Type: WK3-340/70 Weiss Climate Test Chamber, Air-Cooled Control Unit: Touch Panel All control and operation commands can be triggered by simply touching the function icons on the “Touch Panel” control unit. Leveling Feet To compensate for floor unevenness and to ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with ports on both the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Standard fitted ports: R1: DN 125 mm L1: DN 85 mm Volume: 335 liters Test Chamber Dimensions: Internal dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Data for Temperature Tests: Minimum temperature: –72°C Maximum temperature: +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature homogeneity: ± 0.5 to ± 1.5 K Temperature change rate, cooling: 3 K/min Temperature change rate, heating: 3 K/min Cgjdpfx Asziiwuod Iow Data for Climate Tests: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% rH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature homogeneity: ± 0.5 to ± 1 K Temporal humidity deviation: ± 1 to ± 3% rH Operational Data: Test chamber lighting: Halogen lamp 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 16 A Rated power: 4.9 kW Customer side fuse: 16 A slow-blow Refrigerant: R-452A/R23 Weight: approx. 585 kg Important information for you as a buyer: The following steps are proactively carried out on all chambers offered by us: 1. Function check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Stav: veľmi dobrý (použitý), Heraeus Vötsch Model: VCS 7018-5 Climatic Test Chamber with Humidity, Water-Cooled Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External Dimensions: Width 870 mm x Depth 1280 mm x Height 1775 mm Specifications for Temperature Testing: Temperature range: -70°C to +180°C Cgjdoziiwhjpfx Ad Isw time-based ± 0.1 to ± 0.5 K spatial ± 0.5 to ± 2.0 K Temperature gradient: 1 to 4 K Temperature change rate according to IEC 60068-3-5 Heating: 7.5 K/min. Cooling: 7.5 K/min. Specifications for Climate Testing: Temperature range: +10 to +95°C Humidity range: 10 to 98% r.h. Temperature deviation (time): ± 0.1 to ± 0.3 K Temperature deviation (spatial): ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Humidity fluctuation (time): ± 1 to ± 3% r.h. Dew point range: -3 to +94°C Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 10 kW Rated current: 21 A Protection: 32 A slow-blow, provided by customer Refrigerants: R-404A / R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg For your peace of mind as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data, specifications, and information are subject to change and correction!) For further questions, please contact us by phone.

Stav: veľmi dobrý (použitý), Pílova s prítlačným nosníkom HOLZ-HER Cut 70 6110 - použité - PC-ovládanie s optimalizáciou, předrezávačka, automatické rozpoznanie dĺžky rezu, bočné prítlačné zariadenie, vzduchové vankúšové stoly, Cgedpfeyu N Rgex Ad Iow plynulý posuv pílového vozíka, dotykový displej, etiketová tlačiareň ----- Technické údaje ----- Dĺžka rezu: 3900 mm, Šírka rezu: 3100 mm, Max. výška rezu: 70 mm, Počet upínacích čeľustí: 6 ks, Max. posuv pílového agregátu: 0-70 m/min., Max. posuv šírkového dorazu: 25/70 m/min., Výkon hlavného pílového motora: 11 kW, Výkon motora predrezávača: 1,1 kW, Priemer hlavného pílového kotúča: 350 mm, Priemer predrezávacieho kotúča: 180 mm, Priemer odsávacieho hrdla dole: 120 mm, Priemer odsávacieho hrdla na prítlačnom nosníku: 3 x120 mm, Max. predistenie: 35 A, Menovitý prúd najväčšieho odberateľa: 20,6 A Kvalitatívne informácie: - Pílový hriadeľ novo uložený - Predrezávač novo uložený - Kompletná základná kontrola - Kompletné základné čistenie - Elektrika skontrolovaná - Okamžite pripravené na použitie

Stav: pripravené na použitie (použité), KLIPSOVAČKA Technopack Typ: KDCV 70 Výkon: 0,1 kW Rozmery zariadenia: 1250 x 600 x 1850 mm Cgsdpfxorvgt Io Ad Ijw Hmotnosť: 118 kg Určená pre všetky druhy obalov: plastové, vláknité, kolagénové a prírodné Stroj umiestnený na mobilnom vozíku V cene je lievik s priemerom 22 mm Skladová zásoba: 1 kus Stav: používaný z výroby

Stav: dielensky repasované (použité), Funkcionalita: plne funkčný, vstupné napätie: 400 V, rok poslednej generálnej opravy: 2026, Certifikované DGUV do: 08/2027, pracovná šírka: 500 mm, šírka dopravného pásu: 700 mm, typ vstupného prúdu: trojfázový, Stroj na balenie rožkov Universum HWM 50/70 EZ Pre všetky druhy tyčiniek ako Kornspitz, praclík a slané tyčinky a pod. Univerzálny - kombinovaný - baliaci stroj Pre všetky druhy cesta na balenie a dlhé valcovanie Stroj na balenie rožkov so spodným dlhým valcom Iba u nás overené podľa DGUV V3 Pripojenie 400V, zástrčka 16A-CEE Použitý stroj, repasovaný a kontrolovaný SAB Cgjdpfx Adszfym Ee Iew S garanciou Navštívte našu veľkú výstavu!

Stav: veľmi dobrý (použitý), Vötsch Model: VC 7018 Vötsch Climate Test Chamber VC 7018, water-cooled Control Unit: “Touchpanel” All control and operating commands can be issued by simply touching the function symbols on the control unit “Touchpanel”. Leveling Feet To compensate for uneven floors and to ensure sufficient ventilation of the machine section, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on the right and left sides, allowing measurement leads and test devices to be routed into the test space. Standard configuration feed-throughs: R1: nominal width 125 mm L1: nominal width 50 mm Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External Dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Technical data for temperature testing: Temperature range: -70°C to +180°C time stability: ±0.1 to ±0.5 K spatial stability: ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Technical data for climate testing: Temperature range: -10°C to +95°C Humidity range: 10% to 98% RH temperature deviation (temporal, center of usable space): ±0.1 to ±0.3 K temperature deviation (spatial): ±0.5 to ±1.0 K temperature gradient: 1 to 2 K humidity deviation (temporal, center of usable space): ±1 to ±3 % RH Electrical connection: Rated voltage: 3/N/PE AC 400V ±10%, 50Hz Rated power: 5.9 kW Rated current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, on-site Refrigerants: R-404A and R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg net Buyer Information – For Your Safety! The following points are carried out in advance on all chambers offered by us: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Cedpszh Huhefx Ad Iogw Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Stav: použitý, najazdené kilometre: 103 587 km, výkon: 375 kW (509,86 k), prvá registrácia: 03/2023, typ paliva: nafta, typ prevodu: automatický, emisná trieda: Euro 6, Výbava: klimatizácia, navigačný systém, Motor D2676LF78 - 510 k / 375 kW EURO6 SCR - 2600 Nm C-R OBD-D, prevodovka ZF 12 TX 2826 OD MAN TipMatic, prevodový softvér pre terénne použitie (TipMatic OFFROAD), multifunkčný volant nastaviteľný na výšku a sklon, ESS, EBA2, ASR, zrkadlá vyhrievané a elektricky nastaviteľné, pneumaticky odpružené komfortné sedadlo vodiča, rádio MAN s 12V a 7" farebným displejom + navigácia + NaviSD, ťažné zariadenie RINGFEDER 4040 G 150B, komfortné pneumaticky odpružené sedadlo vodiča s bedrovou opierkou, nastaviteľným ramenom a vyhrievaním, vývodový hriadeľ z boku zotrvačníka s pripojením pre čerpadlo, drážkový profil DIN ISO 14 - 8x32x36 f=1,233, I.S.A.R, rázvor 7000 mm - veľkosť nádrže 5000 MM, MAN BrakeMatic (EBS), núdzový brzdový asistent (ESS), tempomat, systém proti blokovaniu kolies ABS, protipreklzový systém ASR, elektronický stabilizačný program, systém monitorovania tlaku v pneumatikách. Cgedpfxszhqp Ao Ad Iew

Stav: veľmi dobrý (použitý), Weiss Type: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss Climate Chamber, Water-Cooled (Test chamber explosion-proof) INERTING WITH NITROGEN / EXPLOSION-PROOF TEST CHAMBER Technical Data: Test chamber designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Test chamber volume: approx. 600 liters Cooling / Heating operation: -70 to 180°C Climate operation: 10 – 95°C Humidity: 10...98 % rH Temperature change rate: Cooling approx. 2.5 K/min Heating approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A Main fuse required on site: 32 A slow-blow Permissible test load: Total load for mesh trays: 80 kg Test chamber floor: 80 kg, Insert rack: 40 kg Weight: 800 kg Refrigerant: R 404A/R 23 (The evaporator of the air conditioning system has been replaced) Important information for your safety as a buyer! The following steps are carried out on all chambers we offer before delivery: 1. Functional check and replacement of necessary components 2. When necessary, refill with legally compliant refrigerant 3. Leak test with certificate Cgjdpfozh D Ryox Ad Ijw 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to technical changes and errors in the data. All information is subject to change!) If you have further questions, we will be happy to answer them by phone.

Stav: dobrý (použitý), CTS Type: T-70/600/S Water-Cooled Temperature Test Chamber Refrigerant: Converted to R-452A Controls: - 32-bit controller - LCD operating panel - Digital display of setpoint and actual values Cgjdjzh D E Ropfx Ad Iew - Numeric entry of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for external test specimen control Technical Specifications Temperature Testing: Temperature range: -70°C to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat dissipation: Approx. 2500 W at +20°C Approx. 2500 W at 0°C Approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without irradiation, and without additional equipment. Dimensions: Test volume: 600 liters Test chamber dimensions (approx.): Height 850 mm, Width 850 mm, Depth 830 mm External dimensions (approx.): Height 1900 mm, Width 1120 mm, Depth 1875 mm Operating Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your safety as a buyer, the following information: The following items are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to change and errors in technical data and specifications!) If you have further questions, we will be happy to answer them for you by phone.

Stav: použitý, Tepla 400 SC 230 Volt 13A 50/60Hz Tlak: 4–6 bar Rozsah dodávky: (viz obrázky) Cgodpezh Drqsfx Ad Iow Další dotazy Vám rádi zodpovíme telefonicky. Objednávky lze zasílat také písemně emailem nebo faxem.

Stav: použitý, Rok výroby: 1995, Funkcionalita: plne funkčný, Použitý plazmový rezací stôl SOITAB rozmerov 4x2 m s generátorom HYPERTHERM MAX 200, kompletne repasovaný a s novým CNC riadením. Max. hrúbka rezu: 40 mm v ocele, 20 mm v nereze. Dodáva sa kompletne repasovaný s novým CNC, montáž zákazníkom s odborným zaškolením. Termín dodania 30/40 dní. Cena „na kľúč“ vrátane použitého filtra, bez elektroinštalácie a dymovodu od filtra po strechu. Cgsdpfezh Dg Iox Ad Iow

Stav: použitý, najazdené kilometre: 120 572 km, výkon: 132 kW (179,47 k), prvá registrácia: 06/2021, typ paliva: nafta, celková hmotnosť: 7 200 kg, farba: biely, typ prevodu: automatický, emisná trieda: Euro 6, počet sedadiel: 3, celková dĺžka: 8 800 mm, celková šírka: 2 550 mm, celková výška: 3 500 mm, dĺžka ložného priestoru: 6 000 mm, Rok výroby: 2021, Výbava: ABS, centrálne zamykanie, elektronický stabilizačný program (ESP), klimatizácia, sadzový filter, Errors and prior sale excepted! Internal number: 1330.5409538 ----EQUIPMENT * Storage: Central storage compartment with USB charging port * Twin tires on rear axle * Bodybuilder interface with expansion module * Cab air conditioning with automatic climate control - incl. pollen filter and outside temperature display - includes 170 cm³ air conditioning compressor * Box body by SAXAS with 600 cm loading platform length * Fuel tank 117 l * Tail lift * Steering wheel: Steering column adjustable in 2 directions – height and tilt * Air suspension on rear axle * Radio: Digital DAB radio – digital radio with high-speed dual tuner – voice control, USB port, Bluetooth – hands-free system – multifunction steering wheel * Rear cross member * Cruise control * AdBlue tank 20l * Driver airbag with seatbelt tensioner * Comfort dashboard – blue accents on dashboard and door panels – map pocket and cup holder as well as foldable document compartment in center console * Exterior mirrors electrically adjustable and heated, wide-angle mirror, integrated indicators * Seat: Front passenger bench with three-point seat belt for middle seat * Diesel particulate filter – electronically controlled by EDC – SCR catalytic converter * Digital EU tachograph DTCO 4.0 * Torsion bar front suspension – increased front axle load to 2100 kg * Tachometer * Electric windows, left and right * Transmission: 8-speed automatic – ZF 8 HP torque converter automatic transmission incl. gear indicator * Headrest for driver’s seat adjustable in height, tilt and length * Crankcase ventilation, heated * Radiator grille with chrome inserts * Paintwork: solid color * Manual headlight range adjustment * Model designation on both sides * Upholstery: fabric * Rear cab window * Rear wall trim in cab * Power steering * Front mud flaps * TFT color instrument cluster * Trailer socket preparation * Maintenance indicator * Electronic immobilizer * Tinted windscreen and cab side windows * Central locking with remote control ...and much more ----The vehicle is not reconditioned! Nationwide delivery available for an additional fee. Errors and prior sale excepted. We are happy to accept your vehicle as a trade-in. Cjdsrt Smiopfx Ad Iogw Financing / leasing also possible with no down payment! Do you have any questions? We are happy to advise you!

Rok výroby: 2008, stav: pripravené na použitie (použité), Sieťové napätie: 3x 400V, 50Hz, istenie: 125A pomalé, max. prípojný výkon: 83kVA, rezací prúd pri 100% pracovnom cykle: 80-300A, výstupné napätie: 112-200V, menovitý výstupný prúd: 300A, pracovný cyklus: 100%, maximálny vstupný prúd: 120A, krytie: IP22, trieda izolácie: F, spôsob chladenia: AF (vzduchové chladenie), príkon naprázdno: 1,3kW, max. prevádzkový tlak: 0,55MPa (5,5 bar), odolnosť voči prepätiu (Up): 17kV, plazmový horák: PB-S80 W, použiteľné plazmové plyny: O₂, vzduch, Ar, H₂, použiteľné vírivé plyny: vzduch, N₂, dĺžka: 1375mm, šírka: 870mm, výška: 1505mm, hmotnosť: 556kg. Možná obhliadka na mieste. Cgodpfozhnucex Ad Isw

Stav: použitý, Funkcionalita: plne funkčný, Použitý plazmový rezací stôl CR ELECTRONIC, veľkosť 8x2,5 m s generátorom HYPERTHERM HT2000 LHF, repasovaný, s certifikátom "CE". Cgsdpfx Adozhutre Isw

Stav: nový, Plazmová rezačka Erfi PS990 Výrobca: Erfi Typ: PS990 Plazmový rezací stroj ERFI PS990 – výkonné jednostupňové plazmové rezacie zariadenie. Čistý rez v oceli do 20 mm. Deliaci rez až do 25 mm. Bezkontaktné zapaľovanie vďaka HF – zapaľuje aj na lakovaných a zhrdzavených povrchoch pomocou pilotného oblúka. Súčasťou balenia je horák 6 m, štandardný filter a integrovaný redukčný ventil s manometrom. Zariadenia ERFI sú vyrábané s najvyššou starostlivosťou v Nemecku – preto spoločnosť ERFI poskytuje štandardne záruku 3 roky – bez obmedzenia. Technické údaje: Sieťové napätie 3x400V Frekvencia 50Hz Istenie 32A pomalé Rezací prúd 60A stupeň 1 / 90A stupeň 2 Tlak vzduchu 6-10 bar Hmotnosť 105 kg Csdpezgu Rnsfx Ad Iogw Ihneď k dispozícii. Osobný odber. K dispozícii vysokozdvižný vozík. Možná aj doprava. Zmeny a predaj vyhradené.

Stav: použitý, Ferromatik miešací šnek Ø 70 mm pre IU2495 a IU2650 – demontovaný z Ferromatik K-Tec 450 - demontovaný z IU2495 - vybraný z bežiaceho stroja - plne funkčný - Vstup: 69,80 mm Cgsdjyxg Tbspfx Ad Isw - Stred: 69,80 mm - Výstup: 69,80 mm - Celková dĺžka: 225,80 cm Výrobca: Ferromatik Milacron

Stav: veľmi dobrý (použitý), - Pre nepretržitú, nestráženú prevádzku - Pre teploty 100 °C - 300 °C - Vonkajší rozmer: 1500 x 2773 x 2096 mm (Š x V x D) - Svetlý vnútorný rozmer pre každú komoru: 800 x 800 x 1100 mm (Š x V x D), výška s nosníkom = 700 mm - Max. rozmer dávky: 700 x 600 x 1000 mm (Š x V x D); max. hmotnosť 500 kg Pripojovacie hodnoty na komoru: Cirkulácia = 3,0 kW (1 ks); Elektrické ohrievanie = 30 kW (1 regulačná skupina) Presnosť teploty +/- 5 K pri 150 °C, 250 °C, 300 °C v závislosti od geometrie dávky, možnosť nastavenia presnosti teploty až +/- 1,5 K Cgedpfezbnnwox Ad Iew 1 programový regulátor Protherm 500

Stav: použitý, Rok výroby: 2013, Funkcionalita: plne funkčný, číslo stroja/vozidla: PL260-091, typ vstupného prúdu: trojfázový, vstupné napätie: 380 V, celková šírka: 4 500 mm, celková dĺžka: 7 500 mm, celková výška: 1 500 mm, typ chladenia: voda, celková hmotnosť: 9 100 kg, rezací prúd: 260 A, max. hrúbka oceľového plechu: 38 mm, napätie naprázdno: 380 V, pracovný rozsah: 60 mm, dĺžka stola: 6 000 mm, šírka stola: 3 000 mm, pracovná šírka: 3 000 mm, Na predaj priemyselný CNC stroj na termické rezanie plechového materiálu AKYAPAK HPR 260, výroba 2013. Stroj je portálového typu s pracovnou plochou 3000 × 6000 mm, vhodný na rezanie veľkoformátových oceľových plechov. Je vybavený plazmovým systémom Hypertherm HPR260 / HPR260XD, CNC riadením Hypertherm MicroEDGE Pro / Edge Pro a zariadením na kyslíkovo-plynové rezanie. Stroj je vhodný na výrobu kovových konštrukcií, plechových dielov, prípravkov, prírub, polotovarov a detailov z plechovej ocele, ako aj pre ťažké priemyselné aplikácie. Základné technické údaje: Parameter Údaj Výrobca: AKYAPAK Model: HPR 260 Typ stroja: CNC plazmový a plynovo-kyslíkový rezací stroj Rok výroby: 2013 Sériové číslo stroja: PL260-091 Pracovná plocha: 3000 × 6000 mm CNC riadenie: Hypertherm MicroEDGE Pro / Edge Pro Operačný systém: Windows XP Plazmový zdroj: Hypertherm HPR260 / HPR260XD Sériové číslo plazmy: 260XD-004364 Výstupný prúd plazmy: 260 A Duty cycle: 100 % Príkon podľa štítku: 60 kW Napájanie: 380 V / 50 Hz Hmotnosť: 9010 kg Pôvod: Turecko CE značenie: Áno Cjdpfxszibqae Ad Iegw Vybavenie a vlastnosti: Stroj zahŕňa: - CNC portálovú konštrukciu; - pracovný stôl 3000 × 6000 mm; - plazmový systém Hypertherm HPR260 / HPR260XD; - CNC riadenie Hypertherm MicroEDGE Pro / Edge Pro; - plynovú konzolu Hypertherm; - regulátory plynov; - plazmovú rezaciu hlavu; - plynovo-kyslíkovú/oxy-fuel rezaciu zostavu; - riadenie výšky rezacej hlavy; - sekčný stôl s lamelami; - odsávací systém zabudovaný v stole; - ovládací pult s joystickom, Start/Stop, núdzovým zastavením a manuálnymi režimami. Kapacita rezania: Plazmový systém Hypertherm HPR260 je 260 A priemyselný systém pre vysokokvalitné plazmové rezanie. Orientačná kapacita pri čiernej oceli: - výrobný prieraz: cca 32–38 mm, podľa materiálu, plynov a nastavení; - maximálny rez z okraja: do cca 60–64 mm; - kyslíko-plynové rezanie umožňuje obrábanie ešte hrubších oceľových plechov v závislosti od nastavení, dýz a plynového príslušenstva.

Rok výroby: 2018, stav: pripravené na použitie (použité), pojazdová vzdialenosť osi X: 500 mm, celková hmotnosť: 4 050 kg, celková výška: 2 100 mm, maximálna dĺžka produktu: 2 950 mm, This Inanlar CNC HAP 70 25/21 was manufactured in 2018. It offers a bending length of 2,550 mm and a bending force of 70 tons. The machine is equipped with a finger protection system and support arms, ensuring safety and efficiency. With a main motor power of 5.5 kW and a stroke of 185 mm, it is ideal for precision bending applications. Please contact us for further information about this machine. • Bending force: 70 tons • Bending capacity (steel 400 N/mm² across the full length): 3 mm • Distance between frames: 2,100 mm Speeds: • Approach speed: 90 mm/s • Working speed (bending): 8 mm/s • Return speed: 70 mm/s Axes: • X-axis speed: 250 mm/s Safety & Equipment • Finger protection system (spaced pads): 2 units • Table supports: 2 units Hydraulics & Power • Oil tank capacity: 180 liters • Main motor power: 5.5 kW Tooling / Geometry • Ram stroke: 185 mm • Distance between table and ram: 380 mm Cjdpfx Aoya D U Rod Isgw • Throat depth: 310 mm • Table height: 800 mm • Table width: 110 mm Technical Specification Bending length: 2550 mm