Posmill C 1050 kúpiť použité (12 536)

Stav: veľmi dobrý (použitý), Vötsch Model: VC 7018 Vötsch Climate Test Chamber VC 7018, water-cooled Control Unit: “Touchpanel” All control and operating commands can be issued by simply touching the function symbols on the control unit “Touchpanel”. Leveling Feet To compensate for uneven floors and to ensure sufficient ventilation of the machine section, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on the right and left sides, allowing measurement leads and test devices to be routed into the test space. Standard configuration feed-throughs: R1: nominal width 125 mm L1: nominal width 50 mm Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External Dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Technical data for temperature testing: Temperature range: -70°C to +180°C time stability: ±0.1 to ±0.5 K spatial stability: ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Technical data for climate testing: Temperature range: -10°C to +95°C Humidity range: 10% to 98% RH temperature deviation (temporal, center of usable space): ±0.1 to ±0.3 K temperature deviation (spatial): ±0.5 to ±1.0 K temperature gradient: 1 to 2 K humidity deviation (temporal, center of usable space): ±1 to ±3 % RH Electrical connection: Rated voltage: 3/N/PE AC 400V ±10%, 50Hz Rated power: 5.9 kW Rated current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, on-site Refrigerants: R-404A and R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg net Buyer Information – For Your Safety! Iiedpswh Ttmsfx Ac Hjk The following points are carried out in advance on all chambers offered by us: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Stav: veľmi dobrý (použitý), Vötsch Model: VCL 7003 Climate Test Chamber, Air-cooled Iiedpfsv Tnd Sjx Ac Hek Test Chamber Volume: approx. 34 liters Performance for Temperature Tests: Temperature Range: -70 to +180°C Temporal Temperature Deviation: ±0.3 to ±1.0 K Spatial Temperature Uniformity: ±0.5 to ±2.0 K Heating Rate: 4.0 K/min Cooling Rate: 3.0 K/min Heat Compensation: max. 550 W Temperature Calibration Points: +23°C and +80°C Performance for Climatic Tests: Temperature Range: +10 to +95°C Humidity Range: 10 to 98% Temporal Humidity Deviation: ±1 to ±3% Temporal Temperature Deviation: ±0.3 to ±0.5 K Spatial Temperature Uniformity: ±0.5 to ±1.5 K Climatic Calibration Points: +23°C / 50% RH and +95°C / 50% RH Test Chamber Dimensions (W x D x H): 350 mm x 300 mm x 310 mm External Dimensions (W x D x H): 640 mm x 750 mm x 1730 mm Electrical Connection: 1/N/PE AC 230 V ±10%, 50 Hz Rated Current: 11.0 A Rated Power, max.: 2.5 kW Sound Pressure Level: 59 dB(A) Refrigerant: R-404A / R23 Weight: approx. 130 kg Important safety information for buyers: The following points are carried out on all chambers offered by us prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data and information subject to change and error!) For further questions, we are happy to assist you by phone.

Stav: veľmi dobrý (použitý), Here we offer a Vötsch climate test chamber. Model designation: VC³ 4100, air-cooled With a temperature change rate of 3 K/min Test chamber dimensions: height 950 mm x width 1100 mm x depth 950 mm Overall unit dimensions: height 2000 mm x width 1300 mm x depth 1916 mm Volume: 990 liters Cable ports: Ø 125 mm, Ø 50 mm Technical data for temperature tests: Temperature range: -42°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 4.0 K/min Cooling: 3.0 K/min Max. heat compensation at +20°C: 4500 watts Technical data for climatic tests: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% r.h. Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Temporal humidity deviation: ± 1 to ± 3% r.h. Max. heat compensation: 500 W Voltage: 3/N/PE AC 400V ± 10% 50Hz Rated power: 11.5 kW Rated current: 22.0 A Refrigerant: R-404A Weight: approx. 840 kg Iedeqwim Ejpfx Ac Hsik Type: VC³ 4100 Important information for your security as a buyer! The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. Upon successful inspection, chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) For further inquiries, please feel free to contact us by phone.

Stav: veľmi dobrý (použitý), TIRA Type: TCZ 4022 S -2K Description: Climate simulation chamber, air-cooled System Design: The system consists of the following main assemblies: - Walk-in, insulated chamber - Air handling room - Humidification unit - Machine room - Control cabinet Technical Data: Performance Range for Temperature Testing: - Temperature range: -40 to +140°C - Temperature stability, in supply air (over time): ≤ ±0.5°C (without thermal test chamber load, according to DIN 50011 T13 / EN 60068) - Temperature stability, in supply air (spatial): ≤ ±1.0°C (without thermal test chamber load, according to DIN 50011 / EN 60068) - Heating rate (according to DIN 50011): approx. 2.0 K/min (without thermal test chamber load, according to DIN 50011 / EN 60068), without test object, within -30°C to +85°C - Cooling rate (according to DIN 50011): approx. 2.0 K/min (without thermal test chamber load, according to DIN 50011 / EN 60068), without test object, within -30°C to +85°C Performance Range for Climate Testing: - Temperature range: +10 to +90°C - Humidity operating range: 10 to approx. 95% RH (without thermal test chamber load) - Dew point temperature range: +5 to +89°C (without thermal test chamber load) - Humidity stability (in supply air, over time): ≤ ±2.5% RH (measured in supply air) Performance Range for Climate Testing with Heat Compensation: - Temperature range: +15 to +80°C - Humidity: 15 to approx. 80% RH (without thermal test chamber load, with max. 16 kW heat compensation) - Dew point temperature range: +10 to +74°C (without thermal test chamber load) Dimensions: - Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm - External dimensions (W x D x H): approx. 2660 x 6460 x 2800 mm - Clear door opening test chamber door (W x H): 2260 x 2260 mm - Climate module KB 127 (W x D x H): 1700 x 800 x 1400 mm - Control cabinet (W x D x H): 800 x 500 x 2000 mm Design: - Air guidance: Supply air via perforated sheet at rear wall, ceiling area Exhaust air via perforated sheet at rear wall, floor area Iedovx S Hhjpfx Ac Hoik - Temperature control: Direct cooling via evaporation of refrigerant in a finned heat exchanger; Heating with electric resistance heater - Dehumidification: Direct dehumidification by evaporating refrigerant in a heat exchanger - Internal lining: Stainless steel - External cladding: galvanized, powder-coated steel sheet - Floor construction: Stainless steel, floor load capacity 15,000 N/m² Wheel load (contact area ≥4 cm²): 1,500 N/wheel - Door: Double-leaf, stainless steel, external painted, with viewing window (W x H) 1000 x 1000 mm - Test chamber illumination: 4 spotlights at 500 W each - Insulation: Double-layer, 80 mm PUR foam, 120 mm mineral wool Refrigeration Unit (1 piece): Bitzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 piece): EDB 40 Color scheme: - Chamber: RAL9010, white - Door: RAL9010, white - Machine unit: RAL7032, pebble grey - Control cabinet: RAL7032, pebble grey Weights: - Total system: approx. 4,900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidification unit: approx. 64 kg Connections: - Nominal voltage: 400 V +6% / -10%, 3/PE/N, 50 Hz - Nominal power: 95 kW - Nominal current: 150 A

Stav: použitý, mytron typ: T2240 Iiodpfx Asvtl Hqec Hsk Vodou chladená teplotná komora Technické údaje: Vonkajšie rozmery: šírka 1435 mm, výška 1955 mm, hĺbka 2590 mm Rozmery testovacej komory: šírka 1050 mm, výška 1400 mm, hĺbka 1600 mm Objem testovacej komory: cca 2240 l Priechod pre káble: 2 x 100 mm vpravo 2 x 100 mm vľavo Rozsah teplôt: – 40 °C až + 100 °C pri teplote okolitého prostredia 23 °C Časová stálosť teploty: +/- 0,5 °K Priestorová stálosť teploty: +/- 1,0 °K Chladenie: vodné chladenie, prívod a odvod 1" vnútorný závit Uzávierka chladiacej vody magnetickým ventilom pri vypnutom zariadení Signalizácia poruchy pri poruche chladiaceho zariadenia Spotreba chladiacej vody: vstupná teplota cca 15 °C, cca 15 l/min, výstupná teplota cca 22 °C (pri nepretržitom chladení cca 27 °C) Pripojenie na sieť: 3NPE AC 50 Hz 400 V, 32 A CEE zástrčka Výkonová spotreba: cca 6,5 kVA Istenie: 3 x 20,0 AT, 3 x 10,0 AT Osvetlenie: po 25 Wattov na ľavej a pravej strane testovacej komory Odtah pripojenie: DN 100 mm zásuvný systém Bezpečnostné zariadenie: elektronická ochrana proti prehriatiu, pevne nastavená Monitorovanie spalín s akustickým signálom Pozorovacie okno: päťvrstvové zasklenie 130 x 360 mm Chladivo: R 404 A, cca 10 kg Hmotnosť: cca 850 kg Stav: použitý Dodávka: (pozri obrázok) (Zmeny a chyby v technických údajoch vyhradené!) Ďalšie otázky radi zodpovieme telefonicky.

Stav: použitý, Type: CS-70/900 CTS climate test chamber with humidity, water-cooled (has been converted to R-452a) Temperature range: -70 °C to +180°C Humidity range: 10–98% r.h. Test chamber dimensions: Height approx. 870 mm / Width approx. 1000 mm / Depth approx. 1000 mm External dimensions: Height approx. 1950 mm / Width approx. 1200 mm / Depth approx. 2220 mm Control cabinet: Height approx. 2100 mm / Width approx. 800 mm / Depth approx. 400 mm Test chamber volume: 900 liters Iiedpfx Acjxb Dm Io Hek Refrigerants: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50Hz Connected load: 21.2 kW, Rated current: 35.7 A Climate test chamber weight: 900 kg Control cabinet weight: 150 kg For your safety as the buyer, please take note of the following information! The following points are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful checking, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Stav: veľmi dobrý (použitý), Weiss Typ: WK3-2200/40/5/V Weiss klimatická skúšobná komora, vodou chladená Údaje pre teplotné testy: Teplotný rozsah: -40°C až +180°C Rýchlosť zmeny teploty: Ohrievanie: 6,0 K/min Chladenie: 11,5 K/min Teplotná odchýlka: časová ± 0,8 K priestorová ± 2,0 K Tepelná kompenzácia max. 8000 W Údaje pre klimatické testy: Teplotný rozsah: +10 až +95 °C Rozsah teploty rosného bodu: +4 až +94°C s uzatvoreným spodným prvkom Rozsah vlhkosti: 10 až 95 %r.vl. Teplotná odchýlka časová ± 0,3 K Odchýlka vlhkosti časová ± 3 %r.vl. Homogenita teploty: priestorová ± 1,0 K Tepelná kompenzácia max 500 W Testovací priestor: 2160 litrov Rozmery testovacieho priestoru: výška 1115 mm, šírka 1400 mm, hĺbka 1400 mm Vonkajšie rozmery znížené: výška 2318 mm, šírka 1860 mm, hĺbka 3658 mm Vonkajšie rozmery nad shakerom: výška 2710 mm Iedpfxsw I Rxre Ac Hjik Vonkajšie rozmery max. zdvih: výška 3038 mm Rozmery výmenného dna: šírka 1600 mm, hĺbka 1504 mm Prevádzkové údaje: Menovité napätie: 3/N/PE AC 400V 10% 50Hz Menovitý výkon: 38,0 kW Menovitý prúd: 63,0 A Zákaznícke istenie: 80 A pomalé Chladivo: R 404A Hmotnosť: cca 2100 kg Pre vašu bezpečnosť ako kupujúceho nasledujúca informácia! Na všetkých nami ponúkaných komorách sa vopred vykonávajú tieto úkony: 1. Kontrola funkčnosti a výmena potrebných komponentov 2. Prípadné nové naplnenie zákonom stanoveným chladivom 3. Tesniaca skúška s certifikátom 4. Po úspešnej kontrole sú komory podrobené dokumentovanému skúšobnému chodu. Stav: použitý Obsah dodávky: (pozri obrázok) (Zmeny a chyby v technických údajoch vyhradené!) V prípade ďalších otázok vám radi odpovieme telefonicky.

Stav: veľmi dobrý (použitý), Vötsch Typ: VT 3050 Montážne celky / Testovacia skriňa, teplotná komora Chladenie vzduchom Objem testovacej komory: 500 litrov Teplotný rozsah: -30°C / +100°C Časová teplotná odchýlka: K ±0,5 Priestorová teplotná odchýlka: K ±1,5 Iodsw S E N Topfx Ac Heik Teplotný gradient: K 3 Rýchlosť zmeny: Ohrievanie K/min 2,0 Chladenie K/min 1,4 Tepelná kompenzácia max. W 650 Kalibračné hodnoty: +23°C, +80°C Rozmery testovacej komory: šírka 710 mm, hĺbka 590 mm, výška 1250 mm Vonkajšie rozmery: šírka 940 mm, hĺbka 1030 mm, výška 1955 mm Hladina akustického tlaku db(A)

Stav: dobrý (použitý), Vötsch Model: VCS 7130-10 Vötsch Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: Temperature range: -70°C to +180°C Temporal temperature deviation at center of working space: ±0.3 to ±0.8 K Spatial temperature deviation: ±0.5 to ±2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 11 K/min Cooling: 10.5 K/min Specifications for Climate Testing: Temperature range: +10°C to +95°C Humidity range: 10 to 98% RH Temporal temperature deviation at center of working space: ±0.2 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1 K Temperature gradient: 1 to 2 K Humidity fluctuation (temporal, center of working space): ±1 to ±3% RH Technical Data: External dimensions (incl. hinges and door lock): Height: 1995 mm, Width: 1680 mm, Depth: 1855 mm External dimensions (without hinges and door lock): Height: 1995 mm, Width: 1300 mm, Depth: 1855 mm Internal dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm Test chamber volume: approx. 1300 liters Feedthroughs: Feedthroughs are equipped on both the right and left sides, allowing test cables and devices to be run into the chamber. 1 x R1 NW 125 mm 1 x L1 NW 50 mm Chamber illumination: Halogen bulb 24V, 50W Electrical connection: 3/N/PE AC 400V ±10% 50Hz Rated power: 34.0 kW Rated current: 50.0 A Main fuse (on-site): 100 A slow blow Max. heat emission to environment: 2.2 kW Permissible test specimen weight: Max. load of rack supports: 100 kg Chamber floor: 150 kg, removable rack: 50 kg Refrigerant: R 404A / R 23 Weight: 1600 kg Buyer Safety Information! The following work is carried out on all chambers before delivery: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Condition: Used Iisdpfxowynmxe Ac Hek Scope of delivery: (See photo) (We reserve the right to make changes and corrections to the technical data!) For further questions, feel free to contact us by phone.

Stav: dobrý (použitý), Type: VCS 7034-5 Climate test chamber, water-cooled Vötsch VCS 7034-5 Test chamber volume: 335 liters Performance for temperature tests: Temperature range: -70 to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Performance for climate tests: Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration values: +23°C / 50% r.h. and +95°C / 50% r.h. Test chamber dimensions (W x D x H): 580 mm x 765 mm x 750 mm Iiodpfjxgd Rdjx Ac Hjk External dimensions (W x D x H): 870 mm x 1595 mm x 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Nominal power: 10 kW Nominal current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R-404A / R-23 Important information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical specifications are subject to change and errors excepted!) For further questions, we will be happy to answer your call.

Stav: veľmi dobrý (použitý), Type: ClimeEvent C/340/70/3 Climate Test Chamber, Air-Cooled Test chamber internal dimensions: Height 750 mm x Width 580 mm x Depth 450 mm External dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm Specifications for temperature testing: Temperature range: -40°C to +180°C Temperature change rate, cooling: 4.0 K/min Temperature change rate, heating: 3.2 K/min Specifications for climate testing: Temperature range: +10°C to +95°C Dew point range: -3 to +94°C Humidity range: 20% to 90% RH Temperature deviation over time in test space: ±0.1 to ±0.5 K Temperature deviation spatially: ±0.5 to ±1.0 K Electrical connection: Ijdpfx Ajxn Swuoc Hsik Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 4.1 kW Rated current: 14.0 A Refrigerants: R449A & R23 Test chamber volume: approx. 335 liters Weight: approx. 520 kg net For your safety as the buyer, please note the following information! The following measures are performed on all chambers we offer before delivery: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) If you have further questions, we would be happy to answer them by phone.

Stav: veľmi dobrý (použitý), CTS Klimatic test chamber C-55/1000 Li, water-cooled Temperature range: -50°C to +100°C Humidity range: 5 to 95% r.H. Dew point range: 5°C to +78°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Iiedpfx Acova Hi Hj Hjk Rated current: 18 A Compressor: TFH2511Z / TFH2511Z refrigerant R404A/R23 The CTS cabinet series model designation is composed as follows: e.g. Type C -55/1000/Li 1) C means: Climate 2) -55 means: lower temperature limit -55°C 3) 1000 means: 1000 liters test chamber volume 4) Li means: special equipment for tests with lithium-ion batteries Control: 32-bit controller LCD operating panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for custom test item control Test chamber lighting: Energy-efficient, high-luminance LED light bar mounted on the door Support grid: Stainless steel, support surface 970 x 980 mm Max. load per grid: 35 kg Total load at max. grid configuration: 100 kg 1a Feedthrough NW50 1b Feedthrough 2x NW125 1c Feedthrough 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range: -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating 2.5 K/min Cooling 2.5 K/min Heat compensation: approx. 4000 W at +20°C, approx. 2200 W at -40°C Climate tests: Temperature range: +5°C to +95°C Humidity range: 5% to 95% relative humidity Dew point range: +5°C to +78°C Temperature deviation ≤ ±1.0 K over time Humidity deviation ≤ ±3.0% r.H. over time The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional accessories. Options may affect performance data. Dimensions: Test chamber volume: 1000 liters Test chamber dimensions: height approx. 1000 mm, width approx. 860 mm, depth approx. 1100 mm External dimensions: height approx. 1950 mm, width approx. 1270 mm, depth approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated output 9.5 kW Protection class IP54 Sound pressure level < 58 dB(A) (measured in accordance with DIN EN ISO 3744, at 1 meter distance from the front) Weight approx. 1000 kg Heat emission into installation room: 10.4 kW Cooling unit: Water-cooled, low noise, fully hermetic Stepless power adjustment via electronic monitoring and control system Environmentally friendly refrigerants R404A/R23 For your safety as the buyer, please note the following information! The following points will be carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data and information excepted!) Further questions can be answered by phone.

Stav: veľmi dobrý (použitý), CTS Type: C-40/350 Ex/l Climatic Test Chamber, Water-cooled ATEX Zone 1 The 'Ex/l' designation indicates that this climatic test chamber is suitable for use in hazardous areas classified as Zone 1. This means it is intended for environments where explosive atmospheres may occur. Such equipment is specially designed and tested to ensure safety in these conditions. Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K (over time) Temperature change rate according to IEC 60068-3-5: Heating: 3.5 K/min Cooling: 4 K/min Heat compensation: approx. 3500 W at +20°C approx. 2000 W at -20°C Climate Testing: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to +78°C Temperature deviation: ≤ 1.0 K (over time) Humidity deviation: ≤ +3.0% rH (over time) All technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data. Technical Specification: Refrigeration unit: water-cooled, low noise, fully hermetic, infinitely variable capacity adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber floor load capacity: 150 kg/m² Wire shelf: stainless steel, usable area 620 x 600 mm, max. load per shelf 35 kg, total load with max. number of shelves 100 kg Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Isdpfjwvr H Uox Ac Hjik Numeric input for setpoints Plain text fault messages RS 232 interface Ethernet interface Free control channels for customer-specific test specimen control Dimensions: Test volume: 350 liters Internal dimensions: height 750 mm × width 650 mm × depth 720 mm External dimensions: height 1800 mm × width 850 mm × depth 1640 mm Operating Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated power: 7.15 kW Rated current: 14.3 A Protection class: IP54 Sound pressure level:

Stav: veľmi dobrý (použitý), Here we offer a temperature test chamber. Isdpfxjmn Rcio Ac Heik Water-cooled Temperature range: -45°C to +180°C External dimensions: Width 1300 mm x Height 2100 mm x Depth 2250 mm Test chamber dimensions: Width 840 mm x Height 840 mm x Depth 840 mm Refrigeration unit dimensions: Width 2300 mm x Height 2000 mm x Depth 1300 mm Average heating rate: approx. 3 K/min Average cooling rate: approx. 2 K/min Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Model: VTS 600/45 RS Refrigerant: R452 Condition: used Scope of delivery: (see photo) (Specifications and technical details subject to change and errors reserved!) If you have further questions, we are happy to answer them by phone.

Stav: veľmi dobrý (použitý), Vötsch Type: VTS³ 7027-25 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Technical Data: With a temperature change rate of 25 K/min Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 615 mm External dimensions: Height 1775 mm, Width 780 mm, Depth 1895 mm Iedstz Rqmjpfx Ac Hsik Temperature range: -72°C to +180°C Temperature deviation over time: ±0.1 to ±0.5 Temperature uniformity spatially: ±0.5 to ±2.0 Temperature change rate (cooling): 25 K/min Temperature change rate (heating): 25 K/min Heat compensation at -20°C: 8000 W Heat compensation at +20°C: 8000 W Test chamber volume: 270 liters 2x side feed-throughs ∅ 125 mm 1x side feed-through ∅ 50 mm Chamber is water-cooled Test chamber lighting: LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 26 KW Rated current: 44 A Refrigerants: R-452A and R-23 Weight: approx. 980 kg For your peace of mind as a buyer, the following information applies: The following points are carried out on our offered chambers in advance: 1. Functional inspection and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) If you have additional questions, we are happy to answer them by phone.

Stav: veľmi dobrý (použitý), Vötsch Model: VC³ 0100 Vötsch Climate Test Chamber, Air-Cooled Test Chamber Dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Unit Dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Chamber Volume: 990 liters Temperature Testing: Minimum Temperature: -0°C Maximum Temperature: +90°C Temperature Change Rate Cooling: 0.2 K/min Temperature Change Rate Heating: 0.5 K/min Temporal Temperature Deviation: ±0.1 to ±0.5 K Spatial Temperature Uniformity: ±0.5 to ±1.0 K Heat Compensation at +20°C: 350 W Climatic Testing: Minimum Temperature: +10°C Maximum Temperature: +90°C Dew Point Temperature Range: +4°C to +89.5°C Humidity Range: 10 to 98% RH Temporal Humidity Deviation: ±1 to ±3% RH Temporal Temperature Deviation: ±0.1 to ±0.3 K Spatial Temperature Uniformity: ±0.5 to ±1.0 K Voltage: 1/N/PE AC 230V ±10% 50Hz Nominal Power: 2.3 kW Nominal Current: 10 A Refrigerant: R-404A Weight: approx. 1400 kg Important Information for Buyers: For your assurance, the following measures are taken on all our chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors reserved!) Iisdpjtz T D Ajfx Ac Hok For further questions, feel free to contact us by telephone.

Stav: veľmi dobrý (použitý), Vötsch Model: VC 7018 Vötsch Climate Test Chamber VC 7018, water-cooled Control Unit: “Touchpanel” All control and operating commands can be issued by simply touching the function symbols on the control unit “Touchpanel”. Leveling Feet To compensate for uneven floors and to ensure sufficient ventilation of the machine section, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on the right and left sides, allowing measurement leads and test devices to be routed into the test space. Standard configuration feed-throughs: R1: nominal width 125 mm L1: nominal width 50 mm Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External Dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Technical data for temperature testing: Temperature range: -70°C to +180°C time stability: ±0.1 to ±0.5 K spatial stability: ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Technical data for climate testing: Temperature range: -10°C to +95°C Humidity range: 10% to 98% RH temperature deviation (temporal, center of usable space): ±0.1 to ±0.3 K temperature deviation (spatial): ±0.5 to ±1.0 K temperature gradient: 1 to 2 K humidity deviation (temporal, center of usable space): ±1 to ±3 % RH Electrical connection: Rated voltage: 3/N/PE AC 400V ±10%, 50Hz Rated power: 5.9 kW Rated current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, on-site Refrigerants: R-404A and R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg net Buyer Information – For Your Safety! The following points are carried out in advance on all chambers offered by us: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) Ijdpfswgaykex Ac Heik (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Stav: veľmi dobrý (použitý), Weiss Model: WKL 34/40 Weiss Climate Chamber, Air-Cooled Temperature range: -40°C to +150°C Chamber volume: 34 liters Feedthroughs installed as standard: R1 NW 50 mm L1 NW 120 mm Internal dimensions: Height 310 mm x Width 324 mm x Depth 300 mm External dimensions: Height 1740 mm x Width 630 mm x Depth 970 mm Performance data for temperature tests: Temperature range: -40°C to +150°C Temperature variation at steady-state (according to IEC 60068-3-5): Temporal temperature fluctuation (center of working space): ±0.3 to ±1 K / ±1 to ±2 K Spatial temperature deviation (temperature gradient): 2 to 4 Temperature change rate (IEC 60068-3-5): Heating: 2.5 K/min Cooling: 3.5 K/min Maximum heat compensation: 800 W Performance data for climate tests: Temperature range: +10°C to +95°C Humidity range: 10 to 98 % r.H. Temperature and humidity variation (at steady-state, per IEC 60068-3-5): Temporal temperature fluctuation (center of working space): ±0.3 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 (temperature gradient): 1 to 3 Temporal humidity fluctuation (center of working space): ±3 to ±5 % r.H. Operating data: Test chamber lighting: Halogen bulb 12V, 20W Rated voltage: 1/N / PE AC 230 V ± 10 %, 50 Hz Rated power: 1.8 kW Rated current: 8.0 A Fuse (customer side): 16A slow-blow Heat emission, air-cooled chambers: Maximum heat emission to surroundings: 800 W Refrigerant: R-404A Weight: 110 kg Important information: "The table shown in the photos is not included in the sale." For your security as a buyer, please note the following: The following points are carried out on all chambers we offer in advance: Iijdpfxsxvpp Rj Ac Hjk 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to change and error in technical data and specifications!) For further questions, feel free to contact us by phone.

Stav: veľmi dobrý (použitý), We are offering a Weiss temperature chamber for sale. Iiedpfeq U Sdnex Ac Hek Weiss Temperature Chamber with S!MCON / 32 Control, Air-Cooled (Refrigerant converted to R-452A) Test Chamber Volume: approx. 335 liters Internal Dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External Dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Operating Data: Test chamber lighting: Halogen bulb 24V, 50W Nominal voltage: 3/N / PE AC 400 V ±10%, 50 Hz Nominal current: 12.5 A Nominal power: 4.1 kW External circuit fuse: 16 A slow-blow Sound pressure level: approx. 58 dB(A) (measured 1m in front, 1m height) Temperature Test Data: Temperature range: -72 to +180 °C Temporal temperature deviation at working space center: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5): Heating: 3.0 K/min Cooling: 3.0 K/min Maximum heat compensation: 1500 W Refrigerant: R-452A / R-23 Weight: 585 kg Type: WT3-340/70 Important note for your safety as a buyer! The following procedures are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Changes and errors in the technical data and specifications reserved!) Should you have further questions, we are happy to assist you by phone.

Stav: veľmi dobrý (použitý), Here we offer you a TPS Blue-M temperature convection oven. TPS Blue-M Temperature Convection Oven Blau M 7780 Specifications Temperature range: 15°C above ambient temperature up to 704°C Internal dimensions (W x D x H): 25cm x 20cm x 20cm External dimensions (W x D x H): 51cm x 38cm x 72cm Iijdpfx Acsdv Rabe Hek Cladding dimensions (W x D x H): 68cm x 48cm x 77cm Electrical rating: 380V 3 phase 50 Hz The CW-7780 has 8 shelf positions on 2" centers Fume hood, stainless steel design, without extractor/fan Model: CW-7780-JY-MP550 Condition: used Scope of delivery: (see picture) (Specifications and details are subject to change and may contain errors!) For further questions, we are happy to assist you by phone.

Stav: veľmi dobrý (použitý), Here we offer a BIA multifunction cabinet. BIA multifunction cabinet Temperature range: +15°C to +30°C and humidity Refrigerant: R-404A 230V 50Hz 10A Ijdpfsfktnyjx Ac Heik Type: C890TH For your security as a buyer, please note the following information! The following steps are performed on our offered chambers in advance: 1. Functional inspection and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (see image) (Technical data and specifications subject to change and error!) If you have any further questions, feel free to contact us by phone.

Stav: veľmi dobrý (použitý), CTS Temperature Test Chamber T-55/1000 Li, Water-Cooled Temperature Range: -50°C to +100°C Rated Voltage: 400V 3/N 50Hz Rated Power: 9.5 kW Rated Current: 18 A Compressor: TFH2511Z / TFH2511Z, Refrigerants R404A/R23 Model designation of the CTS cabinet series is structured as follows: e.g., Type T -55/1000/Li 1) T stands for: Temperature 2) -55 indicates: minimum temperature -55°C 3) 1000 indicates: 1000-liter test chamber volume 4) Li indicates: special configuration for tests with lithium-ion accumulators Control: 32-bit controller LCD control panel Digital display of set and actual values Numerical setpoint input Error messages in plain text Ethernet interface RS 232 interface Free switching channels for customer-side test item control Test Chamber Lighting: Energy-efficient, high-intensity LED light bar mounted on the door Rack: Stainless steel, usable area 970 x 980 mm Max. load per rack: 35 kg Total load with maximum rack installation: 100 kg Feedthroughs: 1x NW50 2x NW125 2x Rp 3 1/4° for Minimax Technical Performance Data: Temperature Testing: Temperature range: -50°C to +100°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating: 2.5 K/min Cooling: 2.5 K/min Ijdsvba Raspfx Ac Hjik Thermal compensation: Approx. 4000 W at +20°C Approx. 2200 W at -40°C The technical specifications refer to an ambient temperature of +25°C, rated voltage 400V, without test item, thermal compensation, or additional equipment. Options may affect performance data. Dimensions: Test volume: 1000 liters Internal dimensions (approx.): Height 1000 mm, Width 860 mm, Depth 1100 mm External dimensions (approx.): Height 1950 mm, Width 1270 mm, Depth 1900 mm Operating Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated current: 18 A Rated power: 9.5 kW Degree of protection: IP 54 Sound pressure level: < 58 dB(A) (measured according to DIN EN ISO 3744 at 1m distance from the front) Weight approx. 1000 kg Heat emission to installation area: 10.4 kW Cooling Unit: Water-cooled, low-noise, fully hermetic Stepless power control via electronic monitoring and control system Environmentally friendly refrigerants R404A/R23 Important Safety Information for Buyers! The following steps are performed on our offered chambers prior to delivery: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) Further questions can be answered by phone.

Stav: veľmi dobrý (použitý), Vötsch Type: VT 7060 Vötsch VT 7060 Temperature Chamber 600 Liters with Simcon 32-net Chamber is air-cooled Reliable climate chamber for demanding environmental simulations Ideal for laboratory, development & quality assurance. Device description: For sale is a professional temperature chamber from Vötsch Industrietechnik, Model VT 7060 with SIMcon 32-net controller. This high-performance unit is suitable for a wide range of demanding environmental simulations — from material testing and electronics testing to long-term climate stress tests. Technical Data (excerpt): Model: Vötsch VT 7060 Internal volume: approx. 600 liters Temperature range: –70°C to +180°C Temperature deviation under stable conditions: Temporal: ±0.1 K to ±0.5 K Spatial: ±0.5 K to ±2.0 K Temperature change rate (without test specimen): Heating: 4 K/min Cooling: 3 K/min Controller: SIMcon 32-net with touch panel Interfaces: RS232, optional RS485/422 1 × port NW 50 mm left 1 × port NW 125 mm left 2 × port NW 125 mm right External dimensions (approx.): Width 1090 × Height 1960 × Depth 1995 mm Internal dimensions (approx.): Width 800 × Height 800 × Depth 950 mm Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 9.1 kW Rated current: 19.0 A Refrigerants: R 404A and R 23 Iodpfx Acswybb Ns Hsik Weight approx. 675 kg For your safety as a buyer, the following is carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, chambers undergo a documented trial run. Shipping / Collection: Collection preferred Shipping via freight carrier on pallet possible throughout Europe. (Shipping costs based on actual expenditure) Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors reserved.) For further questions, we are happy to provide assistance by phone.

Stav: veľmi dobrý (použitý), Typ: PSL-4KPH Espec Temperature and Climate Test Chamber, Air-cooled There is a small dent at the upper edge of the door (see photo). The door closes properly, the seal is intact, and the climate chamber functions technically without fault. The dent is purely cosmetic and does not affect the function, sealing, or control accuracy. Temperature range: -70°C to +150°C Humidity range: 20 to 98% r.h. Temperature/Humidity fluctuation: ±0.3°C / ±2.5% r.h. Temperature/Humidity stability: ±0.5°C / ±3% r.h. Heating/Cooling rates & times: Heating rate: 5.0 °C/min Cooling rate: 3.0 °C/min Test space dimensions: Width 1000 mm x Height 1000 mm x Depth 800 mm External dimensions: Width 1410 mm x Height 1983 mm x Depth 1593 mm Port with silicone plug 100 mm With RS232 interface Test chamber volume: 800 liters Refrigerants: R-404A, R-508A Stainless steel design, AC 400 V 3-phase, 50Hz, 31 A Net weight approx. 720 kg Important safety information for you as the buyer: The following procedures are carried out on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components Iedpewz Er Uefx Ac Hjik 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, monitored with calibrated equipment. Condition: used Scope of delivery: (see photo) (Specifications and details subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Stav: veľmi dobrý (použitý), Vötsch Model: VT³ 4100 Water-cooled temperature test chamber S!MCON/32.NET (with touch panel) Features of this control system: - Color touchscreen with intuitive menu (usually 5.7" or larger) - Programming of temperature/humidity profiles with ramps and dwell times - Data acquisition & logging (e.g. temperature curves, alarms) - USB port for data export (CSV, S!MPATI-compatible if required) - Network interface (Ethernet) for remote monitoring and control - User management with password protection - Interfaces: Volt-free contacts, optionally Modbus or Profibus VT³ 4100 – Technical Data (temperature test chamber) Test chamber volume: 990 liters Temperature range: -40 °C to +180 °C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature gradient: 1 to 3 K Temperature change rate (according to IEC 60068-3-5): Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation capacity (max): 4500 W Calibration values: +23 °C and +80 °C Internal dimensions (W×D×H): 1100 × 950 × 950 mm External dimensions (W×D×H): 1390 × 1955 × 1995 mm Feedthroughs: The test chamber is equipped with feedthroughs on both the left and right sides. Measuring cables and test equipment can be passed into the chamber through these. Iiodpfxewyu H Ej Ac Hjk - 1 x L1 NW 50 mm - 1 x R1 NW 125 mm - 3 x R1 NW 50 mm Electrical connection: 3/N/PE AC, 400V ±10%, 50Hz Power consumption: 11.5 kW Rated current: 22 A Noise level: approx. 62 dB(A) Refrigerant: R452A Weight: 920 kg Important safety information for buyers! The following points are carried out in advance on all chambers we offer: 1. Function check and replacement of necessary components 2. New refill with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data!) If you have any further questions, we are happy to answer them by phone.