Tlačové Valce kúpiť použité (4 341)

Stav: nový, Bending (pre-bending): 6.0 mm Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4,88 x 1,16 x 1,18 m Image similar Bending capacity: 8.0 mm » at 3x top roll diameter Pre-bending: 6.0 mm » at 1.5x top roll diameter Top roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of top and lower roll via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device Gjdpod Ab H Hefx Anqsiu • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion bar • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control console • Operating manual in GERMAN and ENGLISH • Machine and equipment according to CE regulations Catalog see following link: Important points for conical bending: • The max. sheet thickness is 50% of the nominal capacity • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Stav: nový, Dĺžka plechu: 2530 mm Hrúbka plechu: 6 mm Ohýbanie: 5 mm Celkový požadovaný výkon: 5,5 kW Gisdpfsd Ab E Ujx Anqeu Hmotnosť cca: 3750 kg Rozmery (D x Š x V): 4250 x 1 200 x 1 250 mm Priemer valca: 190 mm • 3 valce • Asymetrické usporiadanie valcov s predohybom • Horný valec vyklápateľný dopredu • Motorické ovládanie vpravo-vľavo • Kužeľové valcovanie naklonením zadného valca • Ovládanie nožným pedálom • Kalené valce • Digitálny displej (Ilustračná fotografia) Katalóg nájdete na nasledujúcom odkaze:

Stav: nový, Dĺžka plechu: 2050 mm Hrúbka plechu: 3 mm Celkový príkon: 2,2 kW Hmotnosť cca: 1 500 kg Rozmery (D x Š x V): 3 200 x 750 x 1 000 mm Technické údaje Priemer valca: 130 mm Vybavenie • 3 valce • Asymetrické usporiadanie valcov s predohýbaním • 2 poháňané valce prostredníctvom brzdového motora • Výklopný horný valec dopredu • Chod vpred/vzad Gijdpfx Aed Ab H Aonqsu • Kužeľovité ohýbanie prostredníctvom naklonenia zadného valca • Mobilný ovládací pult Návod na obsluhu v NEMECKOM JAZYKU Katalóg nájdete na nasledujúcom odkaze:

Stav: nový, Ohýbanie: 10,0 mm Dĺžka plechu: 2550 mm Hrúbka plechu: 13,0 mm Celkový príkon: 15,0 kW Hmotnosť cca: 10,6 t Rozmery (DxŠxV): 4,76x1,66x1,59 m Obrázok podobný Ohýbací výkon: 13,0 mm » pri 3x priemere horného valca Počiatočné ohýbanie: 10,0 mm » pri 1,5x priemere horného valca Priemer horného valca: 270 mm Priemer spodného valca: 250 mm Priemer bočného valca: 220 mm max. otvorenie: 50 mm Pracovná výška: 1 155 mm • plne hydraulický pohon horného a spodného valca cez planétovú prevodovku • digitálny ukazovateľ polohy bočných valcov • hydraulické výklopné ložisko • plynulo nastaviteľná rýchlosť valcovania • zariadenie na kužeľové ohýbanie • kalené valce • hydraulické nastavovanie bočných valcov synchronizované cez PLC • hydraulické nastavovanie spodného valca cez torznú hriadeľ • tlakovo nastaviteľný spodný valec • elektrická a hydraulická ochrana proti preťaženiu Gioded Ab H Iopfx Anqou • mobilný ovládací pult • stroj a vybavenie podľa smerníc CE Katalóg nájdete na nasledujúcom odkaze:   Dôležité body pri kužeľovom ohýbaní: • max. hrúbka plechu je 50 % menovitého výkonu • dĺžka kužeľa môže byť max. 30 % alebo musí byť viac ako 60 % dĺžky valca • kalené valce sú odporúčané

Stav: použitý, Rok výroby: 2014, Technické údaje: Materiál: PET hliníkovo-metalizovaná fólia Hrúbka materiálu: 9–50 μm Šírka pásu: 500–2000 mm Šírka role: 2100 mm Priemer pásu (odvin): max. φ1150 mm Hmotnosť pásu (odvin): max. 1500 kg Priemer navíjania produktu: • φ600 mm (frikčný hriadeľ 3”) • φ750 mm (vzduchový hriadeľ 6”) Zaťaženie navíjacieho hriadeľa: max. 500 kg/hriadeľ (podopretý v strede) Rozmery jadra: • Jadro pásu: 3” (φ76,2–76,5 mm), 6” (φ152,4–153 mm) • Šírka jadra produktu: 100–1050 mm Šírka rezu: 200–1950 mm (až 5 rezov) Rýchlosť stroja: max. 400 m/min Typická prevádzková rýchlosť: 200–250 m/min Napínacia sila odvíjania: • 50–500 N (φ650 mm alebo menej) • max. 270 N (φ1000 mm) Napínacia sila navíjania: • φ200 mm: 50–300 N/m • φ400 mm: 50–170 N/m • φ700 mm: 50–100 N/m Mechanická špecifikácia: 1. Sekcia odvíjania • Odvíjanie bezhriadeľové s jednou osou, pevné • Smer: hore alebo dole • Automatická regulácia napätia s spätnou väzbou • Tanečný valec (dancer roll) zahrnutý • Upínanie jadra: rotačný mechanický upínač • Jadrá: štandard 3”, 6” cez adaptér • Zarovnanie pásu: manuálne ±5 mm, automaticky ±100 mm 2. Hlavné hnacie valce • Viacero valcov so špecifikovanými priemermi a povrchovou úpravou • Stláčacie a prítlačné valce s pneumatickým ovládaním tlaku 3. Rezný mechanizmus • Horný/dolný NC strihací nôž • Počet nožových jednotiek: 6 horných + 6 dolných Giodpfjx Ez Umjx Anqju • Nastavenie šírky rezu cez dotykový panel • Presnosť: ±0,1–0,2 mm • Odsávanie prachu: trysky pri hornom noži + odsávanie pri dolnom noži • Voliteľný žiletkový nôž (manuálne nastavenie) 4. Mini navíjač Umiestnenie: pod rezací mechanizmus Jednotky: 2 (ľavá / pravá) Pohon: AC servomotor Napätie: regulácia tanečným valčekom Šírka navíjania: 300 mm Priemer navíjania: φ500 mm 5. Navíjacia sekcia • Duálne navíjanie centrálnym pohonom • 3” vzduchový frikčný hriadeľ + 6” vzduchový hriadeľ • Automatická regulácia napätia podľa priemeru navíjania • Prítlačný valec s tlakovou reguláciou • Polohovanie jadra obojkovou tyčou 6. Výsun produktu • Hydraulický výsuvný podnos • Motorický výsuv s naklápacím mechanizmom Elektrické a riadiace systémy: Pohonný motor linky: 7,5 kW AC servo Navíjací motor: 11 kW AC indukčný Odvíjací motor: 11 kW AC servo Eliminátory stat. elektriny: 5 ks (Keyence SJ-HA) Ovládacie panely: hlavný panel, panel navíjania, panel odvíjania, panel mininavíjača, pomocný panel PLC: Fuji Electric Prípojky, rozmery a prevádzka: Napájanie: AC 200 V, 60 Hz, 3-fázové Spotreba energie: 70 kVA Prívod vzduchu: 0,5 MPa, 500 l/min (suchý vzduch) Hmotnosť stroja: cca 12 ton Farba: polyuretánový náter (E-31872) Inštalačné prostredie: čistá miestnosť triedy 10 000 Požiadavka na zaťaženie podlahy: ≥ 2 tony/m² Dokumentácia: 2 prevádzkové manuály Náhradné diely: • Pohonné remene (4 typy pre linkový pohon) • Hnací remeň navíjania (1 typ) • Hnací remeň odvíjania (1 typ) • Štandardná sada náradia

Stav: použitý, Rok výroby: 2022, Maximálna šírka materského kotúča: 1420 mm Minimálna šírka materského kotúča: 600 mm Maximálny priemer materského kotúča: 1500 mm Maximálna hmotnosť materského kotúča: 2500 kg Maximálne odvíjacie napätie (Ø1500 mm): 600 N Minimálne odvíjacie napätie (Ø1000 mm): 40 N Minimálna štandardná šírka rezu: 100 mm Gijdsyx Uy Aopfx Anqou Maximálna šírka pri navíjaní: 1400 mm Maximálny priemer pri navíjaní: 1050 mm Maximálna hmotnosť pri navíjaní: • Hriadeľ Ø76 mm: 600 kg • Hriadeľ Ø152 mm: 1000 kg Maximálne navíjacie napätie: 600 N Maximálna výrobná rýchlosť: 600 m/min Napájanie: 3 x 400V 50Hz Inštalovaný výkon: 30 kW Stlačený vzduch: 6 bar, suchý Spracovávané materiály: • Obalové lamináty na báze papiera / podkladové lamináty. • Lepenka od 80 do 300 g/m². Odvíjacia sekcia: Samostatný odvíjač medzi stredmi, typ T9, Ø1500 mm, vrátane: • Hydraulické ovládanie valca na zdvíhanie materských kotúčov zo zeme. • Dva motory poháňajúce odvíjací kotúč, riadené ultrazvukovým snímačom priemeru a regulačným napínacím valcom s tanečníkom. • Dva pneumatické rozperné adaptéry SVECOM pre jadrá 70/76 mm (3“). • Dva pneumatické rozperné adaptéry SVECOM pre jadrá 150/152 mm (6“) (nasadené na pneumatických koncových adaptéroch). • Pohyblivý valec pre korekciu okraja materiálu. • Automatický navádzací systém pásu FIFE DP20 s fotoelektrickým snímačom SE26A, korekcia ±100 mm cez elektrický pohon — na kontrolu okraja hárku alebo nepretržitej tlačenej čiary. • Prepojovací chodník umožňujúci navlečenie pásu na úrovni podlahy s plným prístupom k rezacej stanici. • Všetky vodiace valce pásu sú eloxované. • Bezpečnostné krytovanie na ochranu obsluhy. Rezacia sekcia: Rezacia stanica s individuálnymi pneumatickými nožmi a kruhovými protinožmi: • Strihanie strihom proti protinožom. • Hriadeľ protinoža poháňaný samostatným motorom; protinožový hriadeľ je pneumatický. • Pneumatické držiaky nožov na nosníku s rybinovým vedením (TIDLAND) a rozvodom vzduchu pre individuálne ovládanie. • 10 rezacích súprav, každá obsahuje: individuálny pneumatický držiak noža TIDLAND (šírka 25 mm) a dvojbřitý kruhový nôž Ø 90/60 mm. • Sada prstencov protinoža s viacerými drážkami, rozteč 5 mm, dĺžka 50 mm. Sekcia oddelenia pásu: • Oddelovací valec poháňaný rezacím motorom; uhol a obrys plne nastaviteľné. Dosadzovací prítlačný valec: • Prítlačný valec z eloxovaného brúseného hliníka alebo polyuretánu (v závislosti od materiálu). • Tlak nastaviteľný a synchronizovaný s priemerom navíjaného kotúča. • Valec je odnímateľný. Automatický spojovací / priečny rezný systém: • Hydraulicky ovládané výkyvné rameno s priečnym nožom s lineárnym pohybom a prítlačnou doskou na upevnenie pásu na nové jadrá. Systém odsávania okrajového orezania: • Jednotka odsávania orezov s dvomi nastaviteľnými tryskami podľa šírky. • Turbína v zvukovo izolovanej skrini pre dopravovanie orezov do centrálneho systému alebo kontajnera (nie je súčasťou dodávky). Navíjacia sekcia: • Motorová rotačná hlava (dve pozície) s dvoma navíjacími hriadeľmi. • Pohon navíjacieho hriadeľa nadrozmerným asynchrónnym motorom. • Hydraulický strediaci bod pre aktívny navíjaný kotúč. • Dva pneumatické rozperné hriadele Ø76 mm (3“), max. zaťaženie 600 kg každý, vybavené celoplošnými gumovými pásmi s individuálnymi vakmi. • Dva pneumatické rozperné hriadele Ø152 mm (6“), max. zaťaženie 1000 kg každý, taktiež s celoplošnými gumovými pásmi s individuálnymi vakmi.

Stav: použitý, Lepička na 2 valce s ručným čistením Gijdpfx Aeywy T Eonqju

Rok výroby: 2004, stav: veľmi dobrý (použitý), číslo stroja/vozidla: 2151,

Stav: veľmi dobrý (použitý), ROLLOVER COATING MACHINE (REVERSE) Gjdpfx Ansf E Npkjqeiu Max. working width: 1300 mm Total machine length approx.: 1600 mm Built-in control cabinet with operator panel Powered conveyor belt for workpiece feed (with servo controller, approx. 0.75 kW) Feed speed: 6 m/min to 24 m/min Total connected load: approx. 4.3 kW With 2 working units: * 1st unit (with 2 rollers) Dosing roller made of chromed steel, diameter 174 mm + application roller with rubber coating, diameter 248 mm, with 2 speed controllers (power 0.37 kW + 0.75 kW), with rubber-coated counter roller below * 2nd unit (with 2 rollers) Dosing roller made of chromed steel, diameter 174 mm + application roller with rubber coating, diameter 248 mm, with 2 speed controllers (power 0.37 kW + 0.75 kW), with rubber-coated counter roller below

Stav: dobrý (použitý), Dopravníkové valce, transportné valce, náhradné valce, dopravník, valčeková dráha, nosné valce - Dopravníkové valce: transportné valce priemeru 50 mm - Šírka prepravy: cca 500 mm - Hriadeľ: rozmery viď fotografie - Počet: k dispozícii 118x transportný valec Giedpfsyw Il Asx Anqju - Cena: za kus - Celkové rozmery: Ø 50 x 540 mm - Hmotnosť: 1,3 kg/kus

Rok výroby: 2003, stav: pripravené na použitie (použité), - POUŽITÝ - 7-OSÝ SYNCHRONIZOVANÝ CNC OHÝBACÍ LIS OSY: Y1 - Y2 - X1 - X2 - R - Z1 - Z2 OHÝBACIA DĹŽKA: 3100 mm TLAKOVÁ SILA: 130 ton ZDVÍH HORNÉHO NOSNÍKA: 400 mm RÝCHLOSŤ PRÍSUNU: 150 mm/s Gisdpsyry Svsfx Anqou RÝCHLOSŤ NÁVRATU: 150 mm/s PRACOVNÁ RÝCHLOSŤ: 1-10 mm/s VÝKON MOTORA: 18,5 kW HMOTNOSŤ: 14 200 kg CELKOVÉ ROZMERY: 4435 x 2734 x 3095 mm POZNÁMKA: VNÚTORNÉ A VONKAJŠIE POLOHOVADLÁ

Stav: veľmi dobrý (použitý), Rok výroby: 1962, číslo stroja/vozidla: 12.178, CNC Roll Grinding Machine WALDRICH SIEGEN Type WS IIa 100/25 x 5000 For sale is a high-precision roll grinding machine from WALDRICH SIEGEN in proven industrial design. The machine was retrofitted to CNC by HERKULES in 1996 and is in excellent mechanical condition. Condition / Remark The machine is currently not operational as the electrical equipment and CNC control system need to be renewed. 👉 This offers the ideal foundation for a customized retrofit to modern control technology – precisely tailored to your production requirements. Technical Data Max. grinding diameter: 1,200 mm Max. grinding length: 5,000 mm Max. roll weight: 25 t Z-axis travel: 5,000 mm X-axis travel: 900 mm Grinding wheel: Max. Ø 900 mm Main drive: 40.5 kW Grinding wheel drive: 97.5 kW Equipment: Convex and concave grinding device CNC grinding support Precision machining to 0.001 mm accuracy Continuous feed (wear compensation) Partially overhauled and repainted Your Advantages: Mechanically flawless condition – optimal basis for modernization High-precision machining of large rolls Godofbb D Djpfx Anqoiu Retrofit enables modern technology at significantly reduced investment costs Individually adaptable to your requirements Inspection: The machine can be viewed at any time by appointment at our warehouse.

Stav: použitý, Rok výroby: 2000, Grinding length: 800 mm Center height: 150 mm Control: FANUC Grinding wheel dimensions max.: 400 x 63 x 127 mm Workpiece weight: 120 kg Motor power: 7.5 kW Grinding wheel speed range: 45 m/s Swivel range: +45/-15° degrees Workpiece spindle speed: 22–313 / 51–750 rpm Workpiece headstock swiveling: +/- 90° Tailstock quill taper: MT 4 Gjdpfx Anju Hag Nsqoiu X-axis travel: 355 mm Z-axis travel: 4.0 mm Feed rate: 0 to 7.5 m/min Machine weight: approx. 4.0 t Space requirement (LxWxH): approx. 3.7 x 2.2 x 1.9 m -Including coolant system -Including enclosed steady rest -Including dressing diamond -Including open steady rest -Including 3 grinding wheels -Including 3 flanges -Including internal grinding spindle adapters

Stav: použitý, Rok výroby: 1998, Výška medzi hrotmi: 125 mm Vzdialenosť medzi hrotmi: 400 mm Ovládanie: FANUC 21i Maximálny priemer kotúča: 406 mm Rozmery kotúča: 406 x 127 x 40 mm Hmotnosť obrobku: 30 kg Pozdĺžny pojazd suportu: 483 mm Priečny pojazd suportu: 254 mm Celkový príkon: max. 20 kVA Hmotnosť stroja: cca 4,0 t Priestorová náročnosť: cca 3,0 x 2,0 x 2,1 m Vrátane 2 kusov vnútorných brúsnych vretien Vrátane B-os 1° Hirt, riadená Gsdexwdwfjpfx Anqsiu Vrátane C-os Vrátane meracie sondy Quick-Set Vrátane Sensitronu Vrátane hydraulického sklopného tvarovača Vrátane magnetického skľučovadla Vrátane ďalšieho drobného príslušenstva Vrátane dokumentácie Bez chladiaceho zariadenia, pretože bolo predtým pripojené k centrálnemu systému Zapnuté hodiny cca 71 000 h Hodiny vretena cca 25 900 h

Stav: použitý, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Gjdsuxft Eopfx Anqsiu Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (incremental): 0–9.99 mm / diameter Infeed (continuous): 0–9.99 mm / diameter Table swivelling: ±10° Table longitudinal traverse: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mounting: 80 mm Tailstock quill mounting: MT3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine already delivered with 1000 mm centre distance. - Operation via touch panel is extremely user-friendly. - Symbols on the control panel are almost identical to the original control system, so no additional training is required. - Diagnostic function with display of PLC information and digital I/O - Dressing function can be expanded or modified to customer requirements. - Optional orientated spindle stop on the workpiece spindle available. - New maximum infeed amount of 40 mm, optionally expandable. - Digital display on 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - New heavy-duty internal grinding attachment, diameter 80 mm or 100 mm - Increase centre height up to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available on request. Machine is equipped with an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic table longitudinal and rapid traverse movement. Versatile application in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single setup of individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control Currently, the machine tool does not meet the basic safety and protection requirements as stated in the BetrSichV 2015. A determination of the required minimum protection level must be established through a risk assessment according to BetrSichV.

Stav: použitý, Grinding diameter: 250, 350, 450 mm Grinding length: 1,500 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workhead swivelling range: 360° Grinding spindle head swivelling range: 180° +/- Grinding spindle speed: 1,500, 1,700, 2,200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivel: ±6° Table longitudinal travel: 1,750 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight (chucked): 130 kg incl. clamping fixture Internal spindle fit: 80 mm Total power requirement: 6.5 kW Machine weight approx.: 2.9 t Space requirement approx.: 5.6 x 2.0 m As a world-leading company in the field of Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new quality with warranty, but also offer comprehensive service for your machines. Geometrically overhauled and newly painted, with original electrics but new WSS drive and controller in three-phase technology. Optionally available with splash guard doors and X-axis enclosure. - Digital display in two axes. X-axis resolution 0.5µm Available options at extra charge: - Upper table swivel angle display - Encoder with digital display in the workhead - Encoder with digital display in the grinding spindle head (no vertical adjustment possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increased centre height up to a maximum of 225 mm Includes: - Operating tools - Clamping tube for chuck Further accessories available on request. The machine tool does not currently meet the essential safety and protection requirements as specified in BetrSichV 2015. Giedpfsd Ih Dvsx Anqsu A risk assessment according to BetrSichV must be carried out to determine the necessary minimum safety requirements.

Stav: použitý, Grinding diameter: 250, 350, 450 mm Grinding length: 1,500 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Gisdpfod Ih Dwex Anqsu Grinding spindle speed: 1,500, 1,700, 2,200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±6° Table longitudinal travel: 1,750 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight – overhung: 130 kg incl. clamping Internal spindle mounting: 80 mm Total connected load: 6.5 kW Machine weight approx.: 2.9 t Required floor space approx.: 5.6 x 2.0 m Geometrically overhauled and newly painted. Photos show a similar 1,000 mm machine. Includes: - New electrical cabinet - Modern workpiece headstock from Advance model - New workpiece spindle drive - Modern hydraulic unit - Air lift grinding headstock - Modern internal grinding attachment - Operating tools Upper table swivelling extension to 10° Options: - Upper table swivel angle display - Workpiece headstock swivel angle display - Grinding headstock swivel angle display - Splash guard door for Z-axis - Splash guard enclosure for X-axis etc. ADDITIONAL SERVICES: - Machine servicing - Grinding technology consulting - Operator training - Spare parts - Accessories

Stav: použitý, Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling range: 360° Grinding headstock swivelling range: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed: 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swivel range: ±10° Longitudinal table travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight (between centres): 130 kg including clamping device Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirement approx.: 3.1 x 2.0 m As a globally leading company in the field of Kellenberger overhaul/retrofit, we are able not only to deliver machines in as-new condition and with warranty but also to provide comprehensive service for your machines, including full metric overhaul and new paintwork. Gedpfx Anjd Ih D Noqsiu Version R: The machine features central lubrication and roller guides in the X-axis flat slideway, as well as air lift for the grinding headstock. - Digital readout on 2 axes. X-axis resolution: 0.5 μm Optional extras (available at additional cost): - Rotary encoder with digital readout on the workpiece headstock - Rotary encoder with digital readout on the grinding headstock (height adjustment with spindle not possible) - New heavy-duty internal grinding attachment, 80mm or 100mm diameter, with height adjustment - Increase of centre height up to max. 225 mm - Variable speed drive for the grinding spindle Included equipment: - Operating tools - Collet tube for chuck Further accessories available on request. This machine tool currently does not meet the fundamental safety and protection requirements as specified in the BetrSichV 2015 (German Industrial Safety Regulation). The necessary minimum safety objectives must be determined via a risk assessment according to BetrSichV.

Stav: použitý, Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling range: 360° Grinding headstock swivelling range: 180° ± Grinding spindle speed: 1,500, 1,700, 2,200 rpm Incremental infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling range: ±10° Longitudinal table travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight, cantilevered: 130 kg incl. clamping device Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirement approx.: 3.1 × 2.0 m Completely overhauled machine according to Kellenberger standards - Workpiece spindle drive upgraded to modern three-phase technology - Digital readout in 2 axes. Resolution on X-axis: 0.5 µm Optional extras at additional cost: - Rotary encoder with digital readout on the workpiece headstock - Rotary encoder with digital readout on the grinding headstock (height adjustment via spindle not possible) - New heavy-duty internal grinding attachment with diameter 80 mm or 100 mm, with height adjustment - Increased centre height up to max. 225 mm - Speed control for the grinding spindle Included: Godpfsd Ih D Rjx Anqoiu - Operating tools - Collet for chuck Further accessories available on request.

Stav: použitý, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m As the world’s leading company in the field of Kellenberger overhauls and retrofits, we are not only able to deliver machines in as-new quality with warranty, but can also offer service for your machines: Kellenberger Kel-Varia series with Kelco 90 control system. Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control with BEMA grinding software - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (for B axis) Standard Equipment: Giedpsuwv H Tsfx Anqsu - Workheadstock with Morse taper MK5, optional MK5/short taper adapter - Tailstock with MK4 taper. Optionally with fine adjustment - Grinding spindle head T1/T2/T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding attachment, belt-driven by grinding spindle motor - Grinding spindle motor 4.4 kW - High-resolution B axis - Marposs measurement system for grinding wheel measurement - Longitudinal positioning Marposs - GAP control (sensor on the grinding spindle head) ELASO integrated into the control interface - Semi-automatic balancing by ELASO integrated into the control interface - BEMAT grinding wheel measurement Options at additional cost: - HF internal grinding spindle - Ultra-precise, highly torsion-resistant workpiece headstock - Measurement control - Extraction unit - Paper band filter Control: Basic grinding cycles - Workpiece zeroing with Z-position (longitudinal positioning) - Grinding wheel measurement with BEMAT - Infeed sensor GAP - Dressing diamond measurement - Corrections - External and internal cylindrical grinding (plunge and traverse grinding) - External and internal taper grinding (B-axis swiveling, dressing with straight wheel) - External and internal radius grinding (radius dressed on wheel) Optional grinding cycles - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Stav: použitý, Grinding diameter: 250, 350, 450 mm Grinding length: 1,000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1,500, 1,700, 2,200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±8° Longitudinal table movement: 1,300 mm Table feed rate: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. clamping Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Gisdpsd Ih D Hsfx Anqsu Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Photo shows similar machine with 225 mm centre height Version R: Machine equipped with central lubrication and roller guideway in the X-axis flat guide, as well as air lift in the grinding headstock. - Digital display on 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital readout on workpiece headstock - Rotary encoder with digital readout on grinding headstock (height adjustment by spindle not possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height to max. 225 mm - Variable speed control for grinding spindle Includes: - Operating tools - Clamping sleeve for chuck Further accessories available on request. The machine tool currently does not meet the basic safety and protection requirements as specified in the German Industrial Safety Regulation (BetrSichV 2015). A risk assessment pursuant to BetrSichV is required to determine whether the minimum safety objectives can be increased accordingly.

Stav: použitý, Grinding diameter: 350 mm Grinding length: 1500 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° +/- Grinding spindle speeds: 1500, 1700, 2200 rpm Infeed per stroke: 0–40 mm/Ø Continuous infeed: 0–40 mm/Ø Table swivelling: ±6.5° Longitudinal table travel: 1530 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. chucking Max. cross travel: 270 mm Internal spindle mount: 80 mm Tailstock sleeve taper: MK3 Sleeve travel: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space required approx.: 4 x 2 m Overhauled to Kellenberger standards Including new, modern, and future-proof CNC control system. Photo shows a previously delivered machine with special options. - Operation via touch panel is exceptionally user-friendly. Gedpsuxftrjfx Anqsiu - The symbols on the control panel are practically identical to the original controls, eliminating the need for retraining. - Diagnostic function with PLC status and digital I/O display. - Dressing function can be expanded or modified upon customer request. - Workpiece spindle stop in angular position available on request. - New maximum infeed amount 40 mm, can be further increased on request. - Digital position display in 2 axes. Resolution X-axis 0.5 μm. Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (height adjustment with the spindle not possible) - New sturdy internal grinding attachment, diameter 80 mm or 100 mm - Increase of centre height to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse movement of the table. Versatile application possibilities in production for external cylindrical and internal grinding, or for external, face, and internal grinding in a single setup of individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Gauging control This machine tool does not currently meet the essential safety and protection requirements as defined in the BetrSichV 2015 workplace safety regulation. The required minimum protection level must be determined through a risk assessment in accordance with BetrSichV.

Stav: použitý, Rok výroby: 2002, Grinding diameter: 450 mm Grinding length: 1,500 mm Centre height: 225 mm Control: FAGOR EQUIPMENT: - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - T6: Internal grinding attachment - T7: Internal grinding attachment - Spindle motor, water-cooled, 9.8 kW - Marposs tool measuring system - Active longitudinal positioning - Kel-Set - GAP sensor (contactless by ELASO) at T1 and T2, integrated in the control interface - GAP at T3/T4 via fluid sensor - Semi-automatic balancing by ELASO for T1/T2, integrated into the control interface - Tailstock hydraulic, with fine adjustment +/-150 μm - Dressing device on the lower table, workpiece spindle side - Dressing device on the lower table, tailstock side - Dressing device on the upper table - New, service-friendly and operator-friendly enclosure SPECIAL EQUIPMENT: Workpiece spindle headstock with direct drive *Strongly recommended for non-circular grinding *Workpiece weight (chucked): max. 75 kg *Workpiece weight (between centres): 150 kg *Water-cooled *MK5 combined with short taper mounting DIN 55026 *Oriented spindle stop *Fixed lower part B-axis with direct drive, centre height 225 mm *Extremely torsion-resistant *High positioning accuracy *Resolution: ° *Water-cooled MECHANICAL RETROFIT: - Complete overhaul according to Kellenberger measuring protocol - Newly painted Hydraulics unit new: - Improved temperature control (oil cooler) - Energy saving: only one pump, not running continuously - Pressure monitoring - Monitoring of water content in hydrostatic oil (Early detection of bellows damage) Hydrostatic leadscrew in X: - Wear-free due to no contact during operation - No loss of accuracy, even under continuous full load at max. speed - Frictionless at low speeds - No stick-slip effect at low speeds - Precisely transmits even the smallest rotational movements - No backlash in case of change in rotational direction - No fluctuation in friction torque due to ball circulation - Higher axial rigidity than ball screws - Significantly better damping, leading to improved surface finish and tool life - No vibrations from ball return - Suitable for high speeds and accelerations - Cost-effective alternative to linear motor, higher accuracy, significantly lower heat generation - Significantly lower power loss and no issues with chips sticking to permanent magnets - Much lower cooling capacity needed compared to linear motors Gsdpfx Aeuxfu Nonqoiu ELECTRICAL RETROFIT: - New, modern CNC CYLINDRICAL GRINDING MACHINE controller with BEMA grinding interface - Completely new electrical cabinet - New drive technology - Replacement of all wiring, pressure switches, etc. - New absolute glass scales on X and Z axes - New absolute rotary encoder (for B-axis) CONTROL SYSTEM: The grinding software consists of a base license and various options available depending on the machine's configuration. Software base: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed on wheel) - Semi-automatic oscillation grinding - Workpiece...

Stav: použitý, Priemer brúsenia 350 mm Dĺžka brúsenia 1000 mm Výška hrotov 175 mm Potrebný priestor cca 3,6/3,5 m Ako celosvetovo vedúca spoločnosť v oblasti generálnych opráv/retrofitov Kellenberger zabezpečujeme nielen dodávky strojov v kvalite nového stroja so zárukou, ale ponúkame aj servis pre Vaše stroje: Rad Kellenberger Kel-Varia so systémom riadenia Kelco 90. Mechanická generálna oprava: - Kompletná generálna oprava stroja podľa testovacieho protokolu Kellenberger - Nová servisne priateľská kabína - Nové lakovanie Elektrická generálna oprava: - Nové, moderné CNC ovládanie brúsok na guľato s rozhraním BEMA - Nový rozvádzač - Nová pohonná technika - Výmena všetkých elektrických vedení, tlakových spínačov Berus atď. Giodpfsuwv H Hox Anqeu - Nové absolútne sklenené odmeriavacie pravítka v osiach X a Z - Nový absolútny rotačný snímač (pre B-os) Štandardná výbava: - Pevný koník s kužeľom MK5, voliteľne s adaptérom MK5/krátky kužeľ - Otočný koník s kužeľom MK4, voliteľne s jemným nastavením - Brúsne vretená T1/T2/T3 - T1 - priemer brúsneho kotúča 400 mm - T2 - priemer brúsneho kotúča 300 mm - T3 - zariadenie na vnútorné brúsenie, pohon cez brúsny motor remenom - Brúsny motor 4,4 kW - B-os s vysokým rozlíšením - Merací systém Marposs pre meranie brúsnych kotúčov - Pozdĺžne polohovanie Marposs - GAP Control (senzor na brúsnom vretene) ELASO integrované do systému riadenia - Polautomatické vyvažovanie ELASO integrované do systému riadenia - BEMAT meranie brúsnych kotúčov Voliteľná výbava za príplatok: - Vysokofrekvenčné vnútorné brúsne vreteno - Vysoko presný, maximálne tuhostný vreteník obrobku - Merací riadiaci systém - Odsávanie - Pásový papierový filter Ovládanie: Základné brúsne cykly: - Nulovanie obrobku s pozíciou Z (pozdĺžne polohovanie) - Meranie brúsneho kotúča s BEMAT - Senzor priblíženia GAP - Meranie diamantov na orovnávanie - Korekcie - Vonkajšie a vnútorné valcové brúsenie (kyvné a priečne brúsenie) - Vonkajšie a vnútorné kužeľové brúsenie (naklápanie B-osy, orovnávanie s rovným kotúčom) - Vonkajšie a vnútorné rádiusové brúsenie (rádius orovnaný na kotúči) Voliteľné brúsne cykly: - Profilové priečne brúsenie vonkajšie a vnútorné s profilovým kotúčom - Profilové brúsenie vonkajšie a vnútorné s rovným kotúčom - Jedno a viacchodové vonkajšie a vnútorné závitové brúsenie s voľne voliteľným uhlom bokov - Brúsenie trapézových závitov - Neokrúhle/brúsenie mimo osy vonkajšie a vnútorné Cena 15 000 €

Stav: použitý, Grinding diameter 250, 350, 450 mm Grinding length 1000 mm Center height 125, 175, 225 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swiveling 360° Grinding spindle head swiveling 180 + - ° Grinding spindle speed 1500, 1700, 2200 rpm Plunge (per stroke) 0.001–0.030 mm/Ø Gsdpfx Anjuxftxoqeiu Continuous infeed 0–0.95 mm/Ø Table swiveling ±8° Table longitudinal travel 1300 mm Table speed 0.02–6 m/min Workpiece weight between centers 130 kg Workpiece weight max. (overhung) 130 kg incl. clamping equipment Internal spindle mount 70 mm Total power requirement 6.5 kW Machine weight approx. 2.5 t Space requirement approx. 4.2 x 2.0 m As the world's leading company in the field of Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new condition and with warranty, but can also provide service for your machines—recently delivered equipment supplemented with additional options such as: - Splash guard doors - X-axis enclosure - Grinding spindle head swivel angle indicator Available at a surcharge. Geometrically overhauled and newly painted with original electrics. The machine is equipped as standard with central lubrication and roller guide in the X-axis flat slideway as well as air lift-off in the grinding spindle head. - Digital display in 2 axes. X-axis resolution 0.5 μm Options: - Rotary encoder with digital display for the workpiece spindle head - Rotary encoder with digital display for the grinding spindle head (no height adjustment with spindle possible) - New heavy-duty internal grinding unit, diameter 80 mm or 100 mm, with height adjustment - Increase in center height to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories on request. The machine tool does not currently meet the fundamental safety and protection requirements specified in BetrSichV 2015. Raising the required minimum protection level must be established by means of a risk assessment in accordance with BetrSichV.