Trhací Testovací Stroj kúpiť použité (26 590)

Rok výroby: 2025, stav: ako nová (výstavný stroj), Universal Testing Machine PM10 Force: 10 kN Crosshead travel: 700 mm Test area: 400 mm Overall height: 1230 mm Weight: approx. 85 kg Travel resolution: 0.01 mm Test speed: 1–500 mm/min Return speed: 700 mm/min Load cell: 10 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, ensuring “quick tests” can also be performed without a PC. For tests requiring data storage and curve recording, our basic software offers control and evaluation functionalities. This allows you to generate various test routines and create a test report. Furthermore, you have the option of further processing the raw data in your own software systems. Godod R Dpmspfx Aglsua Options: - Delivery & commissioning - DAkkS (German accreditation) or factory calibration according to DIN EN ISO 7500-1 - Clamping fixtures: Compression plates, bending jigs, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips and hydraulic grips.

Rok výroby: 2021, stav: veľmi dobrý (použitý), Zwick/Roell Zwick/Roell RetroLine 50 kN Universal Testing Machine, year of manufacture 2021, including testXpert III For sale is a universal testing machine from Zwick/Roell, model RetroLine 50 kN, year 2021. The unit was used in ongoing operations and is fully functional. It is suitable for tensile and compression tests as well as general material testing in industrial, laboratory, and educational settings. Technical data: Maximum force: 50 kN Crosshead speed: 0.001 – 500 mm/min Test area height: approx. 1380 mm Test area width: approx. 440 mm Data acquisition rate: 400 kHz Data transfer to PC: 500 Hz (optionally up to 2000 Hz) Load cell: Xforce P Measurement accuracy according to ISO 7500-1 / ASTM E4 Class 1: 0.4 – 100% Class 0.5: 2 – 100% Interface: Ethernet (PC connection) Software: testXpert III Electrical data: Power supply: 230 V, 1Ph/N/PE (Schuko) Current consumption: max. 10 A Power input: approx. 2.3 kVA Mains frequency: 50/60 Hz Equipment: PC with monitor and installed testXpert III software Load cell 50 kN Extensometer / measuring sensor Clamping tools / jaws Documentation available System was last configured and operational (Ethernet connection / IP configuration present). Machine electronics: Automatic zero-point correction Measurement signal time correction Eco mode (automatic power-off) Integrated residual current monitoring Module slots available for expansion Protection class: IP32 Weight: approx. 300 – 400 kg Condition: Used, technically functional, good condition as per age. The machine was in use until recently. Scope of delivery: Zwick/Roell RetroLine 50 kN testing machine PC system with monitor testXpert III software Gsdpfx Ajy Attvsgloua Load cell (50 kN) Extensometer / measuring sensor Clamping tools / jaws Documentation & paperwork (Subject to change and errors in technical data; information is non-binding!) For further questions, we are happy to assist you by phone.

Stav: ako nová (výstavný stroj), Rok výroby: 2025, Funkcionalita: plne funkčný, Universal Testing Machine PM3 Force: 3 kN Traverse Stroke: 1200 mm Working Chamber Depth: 66 mm Gsdpfoyc U Rbsx Aglsua Overall Height: 1677 mm Weight: approx. 55 kg Travel Resolution: 0.01 mm Test Speed: 1–500 mm/min Return Speed: 700 mm/min Load Cell: 3 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, enabling 'quick tests' to be performed without a PC. For tests requiring data storage and recording of the curve progression, our basic software offers control and analysis functionality. This allows for the generation of various test sequences and the creation of test reports. Moreover, you have the option to further process the raw data in your own programs. Options: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Test fixtures: Compression plates, bending devices, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Rok výroby: 2025, stav: nový, Univerzálna skúšobná stroj PM50 Sila: 50 kN Zdvih priečnika: 1200 mm Montážny priestor: 400 mm Celková výška: 1817 mm Hmotnosť: cca 380 kg Rozlíšenie posunu: 0,01 mm Skúšobná rýchlosť: 0,03–1000 mm/min Rýchlosť návratu: 1000 mm/min Snímač sily: 50 kN Vrátane vyhodnocovacej elektroniky a základného softvéru. Naše skúšobné stroje sú ovládateľné v samostatnej prevádzke pomocou numerickej klávesnice, čo umožňuje „rýchle testovanie“ aj bez počítača. Pre skúšky, ktoré vyžadujú ukladanie dát a zaznamenávanie priebehových kriviek, ponúkame možnosť riadenia a vyhodnocovania prostredníctvom základného softvéru. Ten umožňuje generovanie rôznych testovacích sekvencií a vytváranie skúšobného protokolu. Okrem toho máte možnosť exportovať surové dáta na ďalšie spracovanie vo vlastných programoch. Voliteľné príslušenstvo: Guedpfxed R Dp Es Aglea - Dodanie a uvedenie do prevádzky - Kalibrácia podľa DAkkS alebo certifikácia podľa DIN EN ISO 7500-1 - Upínacie prípravky: tlakové platne, ohýbacie zariadenia, strihacie prípravky, klinové upínacie čeluste, nožnicové upínače, zariadenia na olúpanie, skrutkové upínače, pneumatické upínače a hydraulické upínače.

Stav: ako nová (výstavný stroj), Rok výroby: 2025, Funkcionalita: plne funkčný, Universal Testing Machine PM3 Force: 3 kN Crosshead travel: 520 mm Test space depth: 66 mm Overall height: 1036 mm Weight: approx. 40 kg Travel resolution: 0.01 mm Test speed: 1–500 mm/min Return speed: 700 mm/min Load cell: 3 kN including evaluation electronics and basic software. Gsdpfefdzupox Agloua Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for 'quick testing' even without a PC. For tests that require data storage and curve recording, our basic software provides the tools for control and evaluation. This enables the creation of various test sequences and generation of test reports. Furthermore, you have the option to process the raw data in your own software programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping fixtures: Compression plates, bending devices, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Stav: použitý, Funkcionalita: plne funkčný, Otočná skúšobná stanica na testovanie transformátorov 8 staníc Skúšobné stanice pre: Gjdpeyl Adzsfx Agleua Napätie, vstup/výstup Prúd v mA, vysoké napätie, tampónová potlač Skúšobné adaptéry pre všetky bežné EI transformátory k dispozícii

Stav: veľmi dobrý (použitý), Zwick/Roell Zwick / Roell ProLine 10 kN Universal Testing Machine – testXpert II V3.61 Description: For sale is an electromechanical universal testing machine Zwick/Roell ProLine with a nominal force of 10 kN, equipped with a Zwick/Roell Xforce-P load cell and the material testing software testXpert II, version 3.61. This machine is suitable for standardized and customer-specific material testing in quality assurance, research, development, and production. Thanks to its modular design, a range of test methods and fixtures can be used. Software – Zwick/Roell testXpert II V3.61 The machine is controlled via the professional testXpert II V3.61 software. This software is an industry standard for materials testing and enables: - Creation, management, and execution of test procedures - Real-time measurement of force, displacement, and time - Automated test sequence control - Graphical representation of measurement curves - Standards-compliant evaluation and test reports - Export of measurement results (e.g. PDF, CSV – depending on configuration) The system includes multiple test methods (e.g. tensile, compression, and calibration procedures) (see software screenshots). Possible test methods With the current configuration, you can carry out tests such as: - Tensile testing (e.g. plastics, metals, composites) - Compression testing - Bending testing - Determination of Fmax / breaking force - Force and displacement monitoring - Calibration and adjustment procedures for load cells (Test methods depend on used grips and fixtures) Technical Data Manufacturer: Zwick/Roell Model: ProLine Nominal force: 10 kN Load cell: Zwick/Roell Xforce P Sensitivity: 2 mV/V Electrical data: Power supply: 230 V Frequency: 50 / 60 Hz Power consumption: 3.5 A Connection: 1L / PE / N Dimensions & Weight (approx.): Height: approx. 1,900 mm Width: approx. 800 mm Depth: approx. 700 mm Weight: approx. 200 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: - Zwick/Roell ProLine 10 kN testing machine Gjdpfsyc R R Djx Agljua - Xforce-P load cell (10 kN) - Control unit - PC with testXpert II V3.61 - Fixtures / tools as shown in the pictures (Subject to changes and errors in technical data, all information is provided without guarantee!) We will be happy to answer any further questions you may have by phone.

Stav: použitý, Funkcionalita: plne funkčný, Použitý ťahový skúšobný stroj Zwick Z2,5 Zwicki s novou riadiacou elektronikou a softvérom PM-Soft-Smart pre Windows na ťahové, tlakové a ohybové skúšky do 2,5 kN. Stroj bol prestavaný na nový riadiaci systém s ovládačom MFC a je možné ho ovládať výhradne z počítača. Pripojenie k štandardnému PC alebo notebooku je realizované pomocou USB kábla. Softvér PM-Soft-Smart pre Windows je vysoko flexibilný riadiaci a vyhodnocovací softvér, ktorý umožňuje používateľovi vytvárať neobmedzený počet skúšobných programov. Dodávka navyše zahŕňa skúšobnú špecifikáciu vytvorenú na základe požiadaviek zákazníka. Vhodné upínacie zariadenia pre takmer všetky skúšobné úlohy sú dostupné ako príslušenstvo. Technické údaje: Jednostĺpový skúšobný stroj vrátane 2,5kN snímača sily Zdvih priečneho nosníka: 800 mm Hĺbka pracovného priestoru: 100 mm Rozlíšenie posunutia: 0,0001 mm Gusdpfeykpamex Aglja Skúšobná rýchlosť: 0,2-1000 mm/min Napájanie: 230 V AC Rozmery (H x Š x V): 414 x 320 x 1260 mm Hmotnosť: cca 40 kg

Stav: veľmi dobrý (použitý), Rok výroby: 1975, Breaking device for detecting internal defects. Bar diameter: 10 - 45 mm Material of bars: extruded non-ferrous rods Machine weight: approx. 3 t Bending and breaking device Simple and robust device for breaking rods to inspect the fracture surface for internal defects. +++++ Please note that the machine is in a disassembled and load-ready condition. For this reason, a power-on demonstration or video production is not possible. Furthermore, our advertisement contains the most informative photos in the best possible quality. Sending additional images is unfortunately not possible. Gujdpfoit Ev Tsx Aglea +++++

Stav: použitý, SincoTec Type: POWER SWING 100 MOT Big Table The POWER SWING 100 MOT from SincoTec is a high-performance resonance testing stand for fatigue testing of materials and components. The system enables dynamic load tests with high forces (up to ±100 kN) with precise control. Typical applications include service life testing, fatigue strength tests, and component validation under realistic conditions. Due to its robust construction, precise sensors, and sturdy granite table, the test stand is ideally suited for research, development, and quality control in industry and academia. Notes: The resonance test stand is ideal for material and component testing under dynamic load. Technical Specifications: General data – Test stand: Total height: 1215 mm (without clamping fixture) Width: 2005 mm Depth: 1205 mm Maximum force amplitude: 50 kN Maximum total force: ±100 kN Sensor accuracy: min. class 1 (according to DIN EN 10002-3) Control Cabinet: Total height: approx. 1800 mm Table top height: 1080 mm Width: 650 mm (narrow table top) / 1420 mm (wide table top) Depth: 700 mm Weight: 180 kg (with granite table top approx. 240 kg) Color: RAL 9006 (white aluminum), table top midnight Installation Requirements: Space required: 4.3 × 3.0 m Minimum ceiling height: 2.5 m Floor load capacity: 2.0 t/m² Power supply: 400 V / 50 Hz (three-phase, clockwise rotating field) Connection: CEE plug 5-pin, 16 A Fuse protection: 16 A Weight: approx. 3.6 t Condition: used Scope of delivery: (see picture) Gjdpfoxrlkvex Aglsua (Specifications are subject to change and errors; information provided without obligation!) If you have further questions, we will be happy to answer them by phone.

Stav: veľmi dobrý (použitý), RMS Vibrations Shaker Test System We offer you an RMS Electrodynamic Vibrations Shaker Test System. RMS Vibrations Shaker Test System Test Manager SWR 900 Vibration Exciter SW 3006 30V-50A-3434 N Power Amplifier TGA 3000-000.00 Condition: used Untested! Tests could not be carried out. Scope of delivery: (See picture) (Specifications and technical data subject to change and error!) We are happy to answer further questions by phone. Written orders are possible by email or fax. Gujdpfxogk I I To Agloa

Stav: použitý, Zwick / Roell type: LTM10 Maximum test frequency: 100 Hz (depending on amplitude) Gsdov Ifgtspfx Agloua Dynamic test force in tension/compression: 10 kN Static test force in tension/compression: 7 kN Piston stroke: 60 mm Positioning and repeatability accuracy: +/- 2 µm Speed range: 1 mm/min - 1 m/s Test area height without load cell: 1,170 mm Weight with linear motor: 1,065 kg (without control unit) Maintenance: according to maintenance requirements, partly by Zwick/Roell Accessories: screw grips, software (TestXpert Research) Connection: 400V 50/60 Hz 32A 3Ph/PE Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data; all information is subject to confirmation!) For further questions, we will be happy to answer your call.

Stav: použitý, Type: POWER SWING 20 kN Sincotec Resonance Testing System Power Swing 20 kN Manufacturer Maintenance Performed General Information: For sale is a used resonance testing system Power Swing 20 kN from Sincotec Test Systems GmbH. The testing rig was operated in single-shift use and all maintenance work was regularly carried out by the manufacturer. Features: - Robust design for continuous operation - Precise resonance testing up to 20 kN - Manufacturer maintenance documentation available - Ideal for research, testing, and development applications Technical Data – Test Stand Characteristic / Value Gjdpfx Aoxrffajgljua Overall height test stand: 1215 mm (without clamping device) Width test stand: 2005 mm Depth test stand: 1205 mm Maximum force amplitude: 10 kN Maximum total force: ±20 kN Transducer accuracy min.: Class 1 (according to DIN EN 10002-3) Technical Data – Control Cabinet Characteristic / Value Overall height control cabinet: approx. 1800 mm Tabletop height: 1080 mm Cabinet width: 650 mm (narrow tabletop) / 1450 mm (wide tabletop) Cabinet depth: 700 mm (narrow tabletop) / 800 mm (wide tabletop) Weight: 152 kg (small tabletop), 187 kg (large tabletop), with (granite plate) 247 kg Site Requirements Characteristic / Value Required space: 4.3 × 3.0 m Required ceiling height: 2.5 m Floor load capacity: 234 N/cm² Electrical Requirements Characteristic / Value Voltage: 400 V three-phase with MP conductor and protective earth Phase sequence: Clockwise rotation Voltage fluctuations: ≤ ±10 % Short-term interruptions: < 20 ms Disturbance limits: Radio interference level A as per VDE 0871 Frequency: 50 Hz ± 1 % Protective earth / grounding resistance: < 0.3 Ω Connection and Protection Characteristic / Value Power supply: 400 V / 50 Hz (clockwise rotation) Connection plug: CEE socket, 5-pin, 16 A Protection: 16 A Test stand weight: approx. 3.6 t Max. clamping device weight: 250 kg Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Stav: použitý, SincoTec Type: Exciting Mot Resonance Testing Stand POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance testing stand is designed as a two-mass oscillator. It consists of an oscillation head excited by an imbalance motor, which is driven by a frequency-controlled asynchronous motor. The oscillation head is located in the upper section of the machine and generates the dynamic amplitude. The oscillation head is supported by preloaded screw compression springs at the upper cross beam and guided centrally. The central load drive is positioned in the lower part of the machine and applies the static preload using a geared motor via a spindle drive. The specimen chamber is situated above the clamping table and is limited on top by the adjustable crosshead. The control system of the test stand is managed by the EXCITING MOT control system. All control electronics for the system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated sheet steel and meets protection class IP 50 according to EN 60529. Technical Data: General Data, Test Stand: Gjdpfxovx Su Sj Agloua Total height of test stand: 1840 to 2240 mm Table height: 1030 mm Test stand width: 800 mm Test stand depth: 1500 mm Specimen chamber height max.: 600 mm (without load cell) Clear pillar passage: 550 mm Maximum force amplitude: 10,000 N Maximum total force: ±20,000 N Maximum stroke: ±5 mm Test frequency: 30 to 110 Hz Accuracy of sensors: at least class 1 (per DIN EN 10002-3) Weight of test stand: approx. 1880 kg Max. weight of fixture: 150 kg General Data, Control Cabinet: Total height: 1900 mm Height of tabletop: 1080 mm Cabinet width: 650 mm Cabinet depth: 700 mm Weight of control cabinet: 152 kg Color: RAI 9006 (White Aluminum), tabletop Midnight Site Requirements: Space required: 2.5 x 2.5 m Minimum ceiling height: 2.8 m Floor load capacity: 170 N/cm² Power supply: 400 V / 50 Hz (Clockwise rotation field) Connection: CEE socket, five-pole, 16 A Protection: 16 A Connection and Environmental Conditions Mains Conditions: Voltage: 400 V three-phase with neutral conductor and protective ground, clockwise rotation field Voltage fluctuations: < ±10% Short-term interruptions: < 20 ms Limits for continuous interference: Interference suppression class A per VDE0871 Frequency: 50 Hz ±1% Protective earth: earth resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of Delivery: (see photos) (Specifications and technical data subject to change or error!) For further questions, please feel free to contact us by phone.

Stav: použitý, Zwick tensile testing machine Type: Z20 Controller BX1-EZ020.A4K-000 Technical Data: Stroke: 200 mm Ram dimensions (H x W x D): 1037 x 385 x 180 mm Fmax: 20 kN Vmax: 125 mm/s Accessories: Extensometer ClipOn 13.5 mm Extensometer MFA 25 (temperature range up to +200°C) Computer + Software testXpert II V3.5 Climate chamber: Airtemp LKG-K-TK-50-040/150 Gedex A Aa Aspfx Agleua Temperature range: -40°C to +150°C Climatic temperature range: 20°C to +90°C Humidity range: 10% to 95% Test chamber volume: 50 liters Temperature change rate: 1 K/min Refrigerant: R404, 5 kg Voltage: 400V 3Ph/N/PE/50 Hz 16 A 9 kW Condition: used Total weight approx. 1500 kg Scope of delivery: (see picture) (Subject to technical modifications and errors. All information is provided without guarantee!) For further questions, we will be happy to assist you by phone. Written orders possible via email or fax.

Stav: použitý, Zwick Typ: Z30 Technické údaje: Celková výška: 2114 mm, šírka: 748 mm, hĺbka: 580 mm Fmax: 30 kN Vmax: 125 mm/s Príslušenstvo: Extenzometer ClipOn 13,5 mm Extenzometer ClipOn 40 mm Počítač + softvér testXpert II V3.5 Celková hmotnosť cca 500 kg Stav: použitý Obsah dodávky: (pozri obrázok) (Zmeny a chyby v technických údajoch vyhradené!) Gedpox Az Skofx Agleua Na ďalšie otázky radi odpovieme telefonicky.

Rok výroby: 2025, stav: nový, Tensile / universal testing machine with a test force of 5 kN, featuring excellent WINDOWS software (freely programmable test sequences) and over 600 ready-to-use test results. GALDABINI: more than 30,000 machines delivered worldwide / over 1,000 in Germany Important note before purchasing used universal / tensile testing machines: WIN XP / WIN 7 are "obsolete"—these machines, often bought at high prices, "must" be modernized (electronics, software for WIN10/11, DC disc-rotor motor and motor controller). The total cost for purchase, transport, retrofit, commissioning, and repairs can quickly become a very expensive dead end. And a year later, the gearbox, which can no longer be sourced, fails (... ?). New GALDABINI universal testing machines come with 2 years warranty, BECKHOFF electronics, and top-tier testing software. They are often more affordable, comply with ALL standards, and are universally suitable for: * Tensile, compression, bending, and cyclic tests * Brushless AC motor, digital motor controller, BOSCH-REXROTH ball screws * Force sensor accuracy: error 0.5% from 1/100 | error 1% from 1/500 Gedpedb Nfpefx Agljua * etc. Machine price WITHOUT clamping fixture – must be selected based on your testing application. The price includes: - Machine fully functional with 2 years warranty - Force accuracy: 0.05 to 5 kN

Rok výroby: 2023, stav: nový, Funkcionalita: plne funkčný, Cenovo efektívny jedno-stĺpový mikroprocesorom riadený ťahový skúšobný stroj na skúšky ťahu, tlaku a ohybu do 3 kN. Pohodlný softvér pre Windows na univerzálne skúšobné procesy; jednoduché skúšky je možné realizovať aj bez PC. Vyrobené v Nemecku. Základná výbava: • Stroj so snímačom (voliteľne medzi 50 N a 3 kN) • Trieda presnosti 0,5 • Základný softvér pre Windows • Záruka 2 roky Voliteľne dostupné: Godpfod H S Hiox Agleua • Rozsiahle upínacie zariadenia (mechanické, pneumatické a hydraulické), napr.: Upínacie platne Skrutkové a klinové upínadlá Ohybové prípravky Špeciálne verzie podľa požiadaviek zákazníka • Extenzometer / snímače predĺženia: Upínacie a dlhodrhové snímače • Teplotná a klimatická komora • Windows softvér PM-Soft-Smart na univerzálne použitie, voľne programovateľný • Uvedenie do prevádzky a zaškolenie

Rok výroby: 2023, stav: nový, Cenovo výhodný dvojstĺpový mikroprocesorom riadený ťahový skúšobný stroj na skúšky ťahu, tlaku a ohybu do 10 kN. Pohodlný softvér pre Windows pre univerzálne skúšobné postupy, jednoduché skúšky je možné vykonávať aj bez PC. Vyrobené v Nemecku Základná výbava: • Stroj so snímačom (voliteľne medzi 50 N a 10 kN) • Trieda presnosti 0,5 • Základný softvér pre Windows • Záruka 2 roky Voliteľne k dispozícii: • Rozsiahle upínacie príslušenstvo (mechanické, pneumatické a hydraulické), napr.: - Tlakové platne - Skrutkové a klinové upínadlá - Prípravky na ohyb Gjdpfxjd H S R Us Aglsua - Špeciálne verzie podľa požiadaviek zákazníka • Extenzometre / merače pretiahnutia: - Prítlačné a dlhodráhové snímače • Teplotná a klimatická komora • Softvér PM-Soft-Smart - na univerzálne použitie, voľne programovateľný • Uvedenie do prevádzky a zaškolenie

Rok výroby: 2025, stav: ako nová (výstavný stroj), Tensile / Universal Testing Machine 200 kN test force, excellent WINDOWS software (freely programmable test sequences), over 600 pre-configured test results. GALDABINI: >30,000 machines delivered worldwide / Germany >1,000 Important note before purchasing used universal / tensile testing machines: WIN XP / WIN 7 are "obsolete." These expensively purchased machines "need" to be modernized (electronics, software for WIN10/11, DC disc rotor motor + motor controller). The total cost for purchase, transport, retrofit, commissioning, post-modification can become an expensive dead end. And one year later, the gearbox, which is no longer available, fails (... ?). New GALDABINI Universal Testing Machine with 2-year warranty, BECKHOFF electronics / top-class testing software are often more affordable, fully compliant with ALL standards, and universally suitable for: * Tensile tests, compression tests, bending tests, cyclic tests * Brushless AC motor, digital motor controller, BOSCH-REXROTH ball screw spindles * Force transducers with 1/100 error 0.5% | 1/500 error 1% * etc. Machine price WITHOUT clamping fixture – must be selected according to your testing application. Price includes: - Machine fully functional with 2-year warranty Gjdpfjcyamwsx Agljua - Force accuracy: 2 to 200 kN (

Rok výroby: 2025, stav: ako nová (výstavný stroj), Ťahová / univerzálna skúšobná stroj s maximálnou skúšobnou silou 10 kN, vynikajúci WINDOWS softvér (voľne programovateľné skúšobné cykly), vyše 600 predpripravených skúšobných výsledkov. GALDABINI: viac než 30 000 dodaných strojov po celom svete, viac než 1 000 v Nemecku Dôležité upozornenie pred kúpou použitých univerzálnych / ťahových skúšobných strojov: WIN XP / WIN 7 už nie sú podporované, tieto draho kúpené stroje je "nutné" zmodernizovať (elektronika, softvér pre WIN10/11, DC-diskový pohon + regulátor motora). Celkové náklady na kúpu, prepravu, modernizáciu, uvedenie do prevádzky a vylepšenia sa môžu zmeniť na nákladnú slepú uličku. A o rok neskôr môže zlyhať prevodovka (... ?). Nový univerzálny skúšobný stroj GALDABINI s 2-ročnou zárukou, elektronikou BECKHOFF a špičkovým skúšobným softvérom je často cenovo výhodnejší, spĺňa VŠETKY normy a je univerzálne použiteľný na: Guodsdb Nf Ijpfx Aglja * ťahové, tlakové, ohybové a cyklické skúšky * bezkomutátorový AC motor, digitálny regulátor motora, guľôčkové závitovky BOSCH-REXROTH * snímače sily s chybou 0,5 % od 1/100 | s chybou 1 % od 1/500 * atď. Cena stroja BEZ zverného príslušenstva – musí byť vybrané pre vašu skúšobnú úlohu. V cene zahrnuté: - Stroj plne funkčný s 2-ročnou zárukou - Presnosť merania sily: 0,1 až 10 kN

Rok výroby: 2025, stav: ako nová (výstavný stroj), Traction / universal testing machine with a test force of 100 kN, excellent WINDOWS software (fully programmable test sequences), over 600 pre-configured test results. GALDABINI: more than 30,000 machines delivered worldwide / over 1,000 in Germany Important note before purchasing used universal / tensile testing machines: WIN XP / WIN 7 are "obsolete" – these expensive machines "must" be modernized (electronics, software for WIN10/11, DC disc rotor motor + motor controller). The final cost for purchase, transport, retrofit, commissioning, and remedial work can turn into an expensive dead end. And one year later, the gearbox could fail, with no replacements available (... ?). Gsdpfxjcxwq Re Aglsua A new GALDABINI universal testing machine with a 2-year warranty, BECKHOFF electronics, and premium test software is often more affordable, fully compliant with ALL standards, and universally suitable for: * Tensile tests, compression tests, bending tests, cyclic testing * Brushless AC motor, digital motor controller, BOSCH-REXROTH ball screw spindles * Load cells with error margin of 0.5% at 1/100 full scale | 1% at 1/500 full scale * etc. Machine price WITHOUT clamping fixtures – these must be selected to suit your specific testing application. Included in the price: - Machine fully operational with 2-year warranty - Force measurement accuracy: 1 to 100 kN (

Rok výroby: 2025, stav: ako nová (výstavný stroj), Tensile / Universal Testing Machine with a test force of 1200 kN, featuring advanced WINDOWS software (freely programmable test sequences) and over 600 ready-to-use test results. GALDABINI: More than 30,000 machines supplied worldwide / over 1,000 in Germany Important note before purchasing used universal / tensile testing machines: Gjdpfx Ajdb Ndcjgloua WIN XP / WIN 7 are "obsolete"; these expensive used machines "must" be modernized (electronics, software for WIN10/11, DC disc rotor motor + motor controller). The total cost for purchase, transport, retrofit, commissioning, and repair can turn into an expensive dead end. And a year later, the gearbox may fail, which is no longer available (... ?). A new GALDABINI universal testing machine with 2-year warranty, BECKHOFF electronics, and top-tier testing software is often more affordable, complies with ALL standards, and is universally suitable for: * Tensile tests, compression tests, bending tests, cyclic tests * Brushless AC motor, digital motor controller, BOSCH-REXROTH ball screw spindles * Load cells from 1/100 error 0.5% | 1/500 error 1% * etc. Machine price WITHOUT clamping fixtures – these must be selected according to your testing requirements. The price includes: - Fully functional machine with 2-year warranty - Force accuracy: 12 to 1200 kN

Rok výroby: 2003, stav: Chybný nosič náhradných dielov (použitý), Popis testu Gjdpfjhvaldex Agljua

Stav: použitý, Test bench, test station, measurement station, test device, measuring instrument, tester for HV (high voltage), PE (protective earth), and IS (insulation) testing ELABO type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High voltage tester The PE/IS/HV SCT 42 / 91-3J.3 is designed for testing dielectric strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 or IEC regulations per EN60204, Part 1. Serial No.: 0064016 Year of manufacture: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement Device 90-1V provides a highly stable DC voltage with low ripple. One output terminal supplies high voltage, the other output terminal is near earth and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year: 2000 Guodpfx Agof Axn Ajloa Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: as per VDE 0871 Rated power: 14 Watt Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO type 90-9B.3ZM92510 Serial No.: 0097588 Year: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on a mobile rack - Various connection cables and accessories as pictured Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many more ELABO devices available under stock numbers 57819, 57820, and 57821.