Weinig Profimat 22 kúpiť použité (477)

Stav: použitý, Slotting spindle 1 pc. Number of milling units 5 pcs. Spindle diameter 50 mm Control Weinig, PC-Nexus # 2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and fully checked before delivery ----- Technical Data Summary (Any additionally included accessories upon request) Pos. 1: Cross-cut saw Godpfovu Hghox Aguskc ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment pneumatically controlled in 8 positions, e.g. for top edge rounding > Laser guide light for identifying the saw section Pos. 2: Horizontal rounding unit, below ----- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool swing diameter: 130 mm > Axial adjustment mechanically coupled with cross-cut saw > Radial adjustment pneumatically controlled on/off NC-controlled length stop ----- > Length: 3,500 mm > Electronic length stop Pos. 3: Tenoning and slotting spindle ----- > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Spindle stroke, vertical: variable 254 mm, continuously adjustable, NC-controlled > Spindle speed: 3,500 rpm > Max. tool swing diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 4: 1st profiling spindle (climb and conventional milling) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 7.5 kW Pos. 5: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Spindle stroke, vertical: variable 254 mm, continuously adjustable, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash bar guide consisting of: Guide rail in the stop (area of the climb milling spindle), Sash support bar from above in the area of the vertical profiling unit on the right and profiling spindle. Pos. 6: Horizontal profiling unit, above ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool swing diameter: 130 mm > Axial adjustment: 30 mm, 8 positions > Radial adjustment: 125 mm, 8 positions Pos. 7: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions > Radial adjustment: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool swing diameter: 210 mm > Motor power: 3.0 kW Pos. 8: Profiling/grooving unit from below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Stav: použitý, Rok výroby: 1998, Net weight: 5,000 kg Dimensions (L x W x H): 450 x 200 x 180 cm Price: On request Four-Sided Planer Weinig Unimat 23 Year of manufacture: 1998 Serial number: 82747 Feed speed: 5/36 m/min Workpiece width min./max.: 20/230 mm Workpiece height min./max.: 8/160 mm Spindle diameter: 40 mm Segmented pressure pad 1st spindle bottom: 7.5 kW 2nd spindle right: 7.5 kW 3rd spindle left: 7.5 kW 4th spindle top: 7.5 kW 5th spindle bottom: 7.5 kW 6th spindle universal: 11 kW Total power: 55 kW Total current: 119 Amps Fuse: 125 Amps Transport dimensions: 4500 x 2000 x 1800 mm (L x W x H) Weight: approx. 5,000 kg - Number of spindles [pcs]: 6 - Spindle 1: - Type: Bottom - Motor power [kW]: 7.5 - Spindle diameter [mm]: 40 - Spindle 2: - Type: Right Gjdpfxownh D Te Agujkc - Motor power [kW]: 7.5 - Spindle diameter [mm]: 40 - Spindle 3: - Type: Left - Motor power [kW]: 7.5 - Spindle diameter [mm]: 40 - Spindle 4: - Type: Top - Motor power [kW]: 7.5 - Spindle diameter [mm]: 40 - Spindle 5: - Type: Bottom - Motor power [kW]: 7.5 - Spindle diameter [mm]: 40 - Spindle 6: - Type: Universal - Motor power [kW]: 11 - Spindle diameter [mm]: 40 - Min. planing width [mm]: 20 - Max. planing width [mm]: 230 - Min. planing height [mm]: 8 - Max. planing height [mm]: 160 - Feed speed: - Min. feed speed [m/min]: 5 - Max. feed speed [m/min]: 36 - Year of manufacture: 1998 - Documentation available: No - Serial number: 82747 - Power consumption [A]: 119 - Fuse [A]: 125 - Total power [kW]: 55.0 - Transport dimensions: 4500 mm x 2000 mm x 1800 mm (L x W x H) - Transport weight [kg]: 5,000 kg Financial Information: VAT: The stated price is excluding VAT VAT/Invoice: VAT is deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Yorick Diebels

Stav: použitý, Rok výroby: 2002, Funkcionalita: plne funkčný, pracovná šírka: 260 mm, hobľovacia výška: 160 mm, priemer vretena: 50 mm, šírka hobľovania: 260 mm, pracovná výška: 160 mm, výkon podávacieho motora: 4 000 W, maximálna rýchlosť vretena: 6 000 ot./min, otáčky vretena (min.): 6 000 ot./min, typ nastavenia výšky: elektrický, typ vstupného prúdu: trojfázový, počet vretien: 5, výkon: 39 kW (53,03 k), vstupná frekvencia: 50 Hz, Výbava: kabína, motorová brzda, Weinig Unimat 1000 s drážkovým lôžkom Pracovná šírka: 260 mm, Pracovná výška: 160 mm, 5 vreten Priemer vretena: 50 mm Usporiadanie vretien: 1-dole (7,5 kW ) 7000 ot./min 2-vpravo (7,5 kW) 7000 ot./min 3-vľavo (7,5 kW) 7000 ot./min 4-hore (7,5 kW) 7000 ot./min 5-dole (5,5 kW) 7000 ot./min Posuv: 4 kW / 6 – 36 m/min, Gkjdpfx Asxk U Tkogujc Jedna poháňaná valec pri výstupe zo stola.

Stav: pripravené na použitie (použité), Rok výroby: 2001, WEINIG Planing and Profiling Technology - Used Pos. 1 BKGD-1100 Twin Resaw Bandsaw 1 unit • Year of manufacture: 1987 • Made in Sweden • Working height: 1000 mm • Maximum cutting height: 350 mm • Maximum distance, saw blade to pressure side: 250 mm • Maximum distance, saw blade to discharge side: 250 mm • Minimum distance between saw blades: 13 mm • Kerf width: 100-120 mm • Blade length: 6300 mm • Feed rate: 10-60 m/min • Saw drive power: 2x18.5 kW • Pump drive power: 4 kW • Kerf speed: 680 rpm • Tiltable feed roller, max.: 45° • Hydraulic tank: 95 l • Cleaning fluid tank: 2x10 l • Weight: 3,000 kg Pos. 2 Weinig E1 High-Mech Infeed Magazine 1 unit • Year of manufacture: 2001 • Maximum feed rate: 80 m/min • Workpiece length: 1800-6100 mm • Workpiece width: 50-230 mm • Workpiece thickness: 12-100 mm Pos. 3 Weinig Hydromat 23 6-Spindle Planer and Moulding Machine 1 unit • Year of manufacture: 2001 • Working width: 230 mm • Working height: 160 mm • Spindle configuration: o 1st, bottom: 11 kW 6000 rpm (joint) o 2nd, right: 7.5 kW 8000 rpm o 3rd, left: 7.5 kW 8000 rpm o 4th, top: 11 kW 6000 rpm (joint) o 5th, top: 7.5 kW 6000 rpm (joint) o 6th, bottom: 7.5 kW 6000 rpm (joint) • Feed rollers in table: 3 pieces • Maximum feed rate: 60 m/min • Counter bearings on 1st, 4th, and 6th spindles Pos. 4 Outfeed Magazine 1 unit • Year of manufacture: 2018 • Hungarian manufacturer • Outfeed belt: 6000 mm (powered) • Cross belt: 5 rubber conveyor belts (powered) Pos. 5 Metron 05C 100/200 Metal Detector 1 unit Pos. 6 Weinig Rondamat 960 Profile Knife Grinding Machine 1 unit • Year of manufacture: 2002 • For grinding planer and profile knives Gedjrqhggjpfx Aguskc • Grinding wheel diameter: 150/225 mm • Grinding wheel width: 2,3,4,10 mm • Grinding wheel bore: 60 mm • Grinding motor power: 1.1 kW • Grinding wheel speed: 1700, 2000, 2400, 3000 rpm • With cooling unit • Maximum working width: 240 mm Pos. 7 Weinig OptiControl Tool Measuring and Display System 1 unit Pos. 8 Weinig Setting Gauge 1 unit • For setting planing knives in the cutterhead Pos. 9 Weinig Hydro Planer Heads, Profile Cutterheads, Tongue & Groove Sets • 27 pieces Pos. 10 BÖHL Junior S-450 VA Wrapping Machine 1 unit • Year of manufacture: 2002 • Wrapping machine for profiles and long goods • Product dimensions: o Width: 50-420 mm o Height: 20-300 mm o Length: 1000 mm to unlimited o Maximum diagonal cross section: 420 mm • PE stretch film thickness: 17-50 μm • Roll diameter: 220 mm • Roll width: 125 mm • Maximum feed rate: 20 m/min • Power rating: 3 kW • Infeed table • Outfeed table

Stav: veľmi dobrý (použitý), CATALOG NUMBER 6946 TECHNICAL DATA - max. working width: 210 mm - max. working height: 120 mm - number of spindles: 2 pcs - spindle diameter: 50 mm Gkedpslhrk Ssfx Aguec from above: - 3 infeed rubber feed rollers, smooth, including 2 double rollers - 2 outfeed rubber feed rollers, including 1 double roller - heads on supports - head adjustment up/down - electric adjustment of upper head height - electric thickness planing setting - spindles equipped with brake - main motor 2×5.5 kW - stepless feed speed adjustment - feed motor 3 kW - feed on Kardan shafts - extraction nozzle diameter 2x160 mm - dimensions (LxWxH): 2350x1780x1950 mm - weight: 1882 kg – German production – jointers – for sharpening knives on the head – 2 Hydro heads included – unpainted – very good condition, used planer Net price: 33,900 PLN Net price: 7,980 EUR Net price calculated at an exchange rate of 4.25 PLN/EUR (in the case of major exchange rate fluctuations the price may change)

Stav: veľmi dobrý (použitý), Rok výroby: 2009, Funkcionalita: plne funkčný, číslo stroja/vozidla: 113340, šírka obrobku (max.): 260 mm, výška obrobku (max.): 150 mm, dĺžka obrobku (max.): 6 000 mm, CNC profilovacie centrum Weinig C124 - Conturex 2 – na frézovanie, vŕtanie a rezanie pri priečnom a pozdĺžnom obrábaní. Technické parametre: Typ: Weinig Conturex2 Rok výroby: 2009 Výrobné číslo: 113340 Výkonnosť: až 40 okien / 8 hodín Min. dĺžka obrobku: 250 mm Max. dĺžka obrobku: 4500 mm (voliteľne 6000 mm) Šírka obrobku: 30 – 260 mm Výška obrobku: 25 – 150 mm Hlavné vretená: 2 × 30 kW, až do 24 000 ot./min. Súčasťou je kompletná sada viac ako 50 nástrojov viditeľných na fotografii. Gksdpfx Agjwcdm Teuec Upínací systém: PowerGrip RePos – automatický s aretáciou Dĺžka pracovného stola: prispôsobená max. dĺžke 4500/6000 mm.

Stav: použitý, Number of spindles: 4 pcs Number of tool sets: 11 pcs Spindle diameter: 50,40 mm Spindle length: 285,125 mm Length: 4000 mm Width: 2000 mm Height: 2200 mm Weinig Univar 10/3 Rebate Milling Machine ----- For milling the rebates of windows, doors, and similar components with irregular, circumferential profiles. The machine is suitable for wood thicknesses from 68 to 92 mm. Time required for rebate milling per frame, average size 1.20 x 1.20 m: approx. 2 min. The available tool positions are selected via a rotary switch at the operator panel. The machine is equipped with 3 hydraulically controlled right-hand precision lift spindles capable of accommodating 3 tool sets—each spindle offers two lifting strokes of 95 mm. The spindle lift operates in a U-movement, minimizing the size of the opening in the fence for short parts. The spindle stroke is finely adjustable horizontally for both tool positions from the operator side. Central lubrication is provided for the spindle units. For splinter-free rebate milling of window sashes, frames, or doors, the first spindle can be switched to right or left rotation. For each of the last 100 mm of a frame end, this spindle, equipped with the corresponding climb-cutting tool, plunges into the passing timber. This prevents the counter-rotating tool of the following spindle from causing tear-out. The first seven transport rollers can be raised with a foot switch, which reduces throughput time. An additional support rail allows for machining large-scale frames. Continuous, chainless rubber roller feed with extremely short roller spacing. Feed beam height adjustment with electronic readout. Electrical specification according to VDE standards. Machine is supplied with operating tools, but without machining tools. Technical data: Min. working width: 40 mm Working height: min. 30 mm, max. 100 mm 1st profiling spindle (climb/non-climb operation) ----- Spindle motor power: 11.0 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm Clamping length: 285 mm Tool reference circle: 112–140 mm Max. tool diameter: 232 mm Vertical spindle travel: 2 x 95 mm for 3 tools Default position below table: 10 mm (adjustable up to 20 mm) Horizontal spindle travel: 80 mm With climb-cut plunge automation 2nd profiling spindle ----- Spindle motor power: 11.0 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm Clamping length: 285 mm Tool reference circle: 112–140 mm Max. tool diameter: 232 mm Vertical spindle travel: 2 x 95 mm for 3 tools Default position below table: 10 mm (adjustable up to 20 mm) Horizontal spindle travel: 80 mm 3rd profiling spindle ----- Spindle motor power: 11.0 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm Clamping length: 285 mm Tool reference circle: 112–140 mm Max. tool diameter: 232 mm Vertical spindle travel: 2 x 95 mm for 3 tools Default position below table: 10 mm (adjustable up to 20 mm) Horizontal spindle travel: 80 mm 4th profiling spindle – Hardware grooving unit, right ----- For routing hardware grooves during the rebate milling process or for grooving along the length profile. Pneumatic horizontal movement with selector switch at the control panel. Motor: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm Clamping height: 125 mm, 2 tools Tool reference circle: min. 140 mm, max. 180 mm Gkodpfx Aovnv Uuoguec Feed motor power: 1.1 kW Feed speed...

Stav: použitý, Rok výroby: 2009, Štvorsranný hobľovací stroj Weinig Variomat Rok výroby: 2009 Sériové číslo: 113680 Gedpewnhh Ejfx Aguskc 400 V, 32 kW, 64 ampér Minimálna – maximálna pracovná šírka: 20–230 mm Minimálna – maximálna pracovná výška: 8–120 mm Maximálny priemer nástroja vertikálneho vretena: 232 mm Maximálny priemer nástroja horizontálneho vretena (okrem prvého): 200 mm Dĺžka podávacieho stola: 1950 mm Rýchlosť posuvu: 6–12 m/min Priemer vretena: 40 mm Otáčky vretena: 6000 ot./min 1. vreteno dole: 5,5 kW 2. a 3. vreteno vľavo a vpravo: 7,5 kW 4. vreteno hore: 11 kW 5. vreteno dole: 5,5 kW Upozornenie: 5. vreteno nie je funkčné. Rozmery: 4000 × 1400 × V1350 mm, hmotnosť 2500 kg. - Rok výroby: 2009 - Dokumentácia dostupná: Nie - Označenie CE: Áno - Sériové číslo: 113680 Finančné informácie: DPH: Uvedená cena je bez DPH DPH/Oddelené zdanenie: DPH je odpočítateľná pre podnikateľov Doručenie a výkup je možné kedykoľvek pre všetky stroje z priemyselného sektora. Yorick Diebels

Stav: použitý, Mechanizácia od Weinig Gkedpfoxg Satsx Aguec Posuvná rýchlosť až do 43 m/min.

Stav: veľmi dobrý (použitý), Rok výroby: 2009, Funkcionalita: plne funkčný, Weinig Dimter ProfiPress 2500 3HF LZ Rok výroby: 2009 Technický stav: veľmi dobrý Weinig Dimter ProfiPress 2500 3HF LZ je vysokovýkonný lis na lepenie dreva, určený na výrobu lepených dosiek a drevených konštrukčných prvkov s vysokou pevnosťou. Stroj je navrhnutý pre efektívne a presné spájanie dreva v dĺžke aj šírke s využitím vysokofrekvenčnej (HF) technológie. Hlavné vlastnosti a prednosti: ✅ Vysokofrekvenčná technológia (HF) – zaručuje rýchle vytvrdzovanie lepidla, skracuje čas lisovania a zvyšuje produkčnú efektivitu. ✅ Robustná konštrukcia – stroj je vyrobený z vysoko kvalitných komponentov čím zabezpečuje dlhú životnosť a spoľahlivosť. ✅ Automatizácia procesov – možnosť integrácie do výrobných liniek pre optimalizáciu práce a zvýšenie efektivity. ✅ Presné nastavovanie prítlaku – zaručuje jednotnú kvalitu hotového produktu. ✅ Univerzálnosť – ideálny pre výrobu lepených panelov, nosníkov, schodiskových stupňov, pracovných dosiek a iných drevených prvkov. _____ Technické údaje: • Maximálna dĺžka lisu: 2500 mm • Lisovacia technológia: vysoká frekvencia (HF) • Počet lisovacích sekcií: 3HF (tri vysokofrekvenčné sekcie) • Prítlačný systém: hydraulický s presnou kontrolou tlaku • Použitie: Lepenie na dĺžku a šírku • Typ lepidla: tavné lepidlá (napr. PVAc, PU) kompatibilné s HF technológiou • Ovládanie: intuitívne užívateľské rozhranie a automatické programovanie lepiaceho cyklu • Spotreba energie: efektívne využitie výkonu, prispôsobené pre intenzívnu produkciu • Bezpečnostný systém: senzory a ochranné kryty spĺňajúce CE normy Spracované rozmery dreva: • Šírka dreva: rovnaké šírky výplní: 30 – 150 mm, štandardne 120 mm • Hrúbka dreva: 7 – 45 mm, štandardne 24 mm • Dĺžka dreva (min./max.): 200 – 2400 mm, štandardne 1250 mm Pri použití prídavných zariadení je potrebné prispôsobiť minimálnu dĺžku dreva alebo použiť vodiacu lištu. Špecifický lisovací tlak: 18 – 160 kN Druh dreva: ihličnaté / listnaté drevo Gksdpfx Ajvyu Iqogusc Vzduchová technika: • R1” / 1/2” – výška cca 600 mm – bez oleja • Prúdenie vzduchu: cca 500 Nl/min (lis/lepiareň) • Odsávanie: cca 8 bar (výveva) Elektrické prípojky: • (1) Lis, mechanika → 14 kW • (1) Generátor HF → 42 kW • Napäťová sieť: 400V / 50Hz • Hmotnosť lisu: 7000 kg (pozícia 5) • Káblový kanál 300 x 150 mm, zapustený do podlahy alebo v jednej úrovni s podlahou; rozvádzač integrovaný v konštrukcii stroja. Základ: • Betónová doska po celej ploche, minimálna hrúbka 200 mm, zhutnená a zosilnená zhora i zospodu. • Statické zaťaženie lisu → viď výkres vľavo. • Maximálne statické zaťaženie na nohu: cca 150 N/cm² • Všetky úpravy základov, zvýšenia či spevnenia musí realizovať zákazník. • Týka sa to aj podest, schodísk, prechodov a inštalácie pneumatických, elektrických a telefónnych rozvodov. Pracovná výška (AH): 940 mm Ponúkame tiež profesionálny demontáž, montáž, uvedenie do prevádzky, školenie obsluhy a servisnú podporu.

Stav: použitý, Rok výroby: 2000, Miesto uskladnenia: Nattheim Gksdpfsvwdmwsx Aguec

Stav: použitý, Rok výroby: 2000, Number of spindles: 6 pcs. Working width: 230 mm Planing height: 120 mm Surface table length: 2500 + 500 mm Feed motor: 3 kW Feed speed: 6–36 m/min 1 WEINIG Planer & Moulder Unimat 23 E 6 spindles (including 2 x right), powerful motors, EM 11 infeed magazine optional Working width: 20–230 mm Working height: 8–120 mm 1st spindle bottom: 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool swing diameter: 125–180 mm Rebate device incl. tool Hardened table insert before 1st bottom spindle 2nd spindle right: 11.0 kW ----- Shared motor with left vertical spindle Diameter: 40 mm Speed: 6000 rpm Tool swing diameter: 112-250 mm Max. tool diameter behind reference edge: 203 mm Max. profiling depth: 35 mm Axial adjustment range: 80 mm 3rd spindle left ----- Shared motor with 2nd spindle Diameter: 40 mm Speed: 6000 rpm Tool swing diameter: 112-200 mm Max. profiling depth: 35 mm Axial adjustment range: 80 mm Pressure shoe in front of left spindle, incl. lateral spring-loaded pressure roller 4th spindle right: 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool swing diameter: 112-250 mm Max. tool diameter behind reference edge: 203 mm Max. profiling depth: 35 mm Axial adjustment range: 80 mm 5th spindle top: 11.0 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool swing diameter: 112-200 mm Max. profiling depth: 35 mm Axial adjustment range: 45 mm Divided pressure shoe before upper spindle, adjustable to tool swing diameter and pivoting away from the tool, spring-loaded. 6th spindle bottom: 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool swing diameter: 112-250 mm Max. profiling depth: 15 mm Axial adjustment range: 45 mm General spindle features ----- All profiling spindles with high concentricity precision. Lubrication points for axial spindle movement. Vertical spindle length: 170 mm Feed system ----- Motor with mechanical brake, 3 kW Mechanical feed steplessly adjustable 6–36 m/min. Feed roller in front of 1st bottom tool pneumatically controlled high/low, Durofer pointed-tooth feed rollers (Weinig patent) with depth limiter, self-cleaning Adjustment range of feed rollers relative to left spindle, axial: 35 mm Extension of the oscillating axis relative to left spindles to 150 mm Machine electrics ----- Operating voltage: 380–400–415 volts, 50 Hz Gkodpfx Agowqr Rvjuoc Machine frame, tables and fences ----- Surface table 2.5 m long (incl. jointing fence) Aluminum extension 0.5 m for surface table, incl. extension of jointing fence Manual Waxilit pump for table resin removal One driven rubber roller (spring-loaded in the outfeed table) Pressure elements and guides ----- Top pressure rollers, pneumatic Top pressure rollers can be swung away, opposite the right spindles for easy tool change. Machine operation ----- Pressure shoe before upper spindle with mechanical digital display. Outfeed after top spindle with mechanical digital display. ATS/E system, automatic 2-axis positioning for spindles no. 3 and 4 Min. working height 12 mm Electronic height adjustment of top spindles and feed Central lubrication points at the front of the machine Safety and sound ...

Stav: použitý, Rok výroby: 1998, Dimensions (L x W): 200 x 604 cm Gkedpfx Aswnhn Sjguoc Four-sided planer Weinig Quattromat 23P Year of manufacture: 1998 400 V, 25 kW, 54 Amps Machine number: 83708 Min./max. working width: 13/230 mm Min./max. working height: 6/120 mm Feed speed: 8 m/min Spindle diameter: 40 mm Infeed table: 2450 mm Spindle speed: 6000 rpm 4 axes: 1st, bottom: 5.5 kW 2nd/3rd, left/right: 11 kW 4th, top: 7.5 kW Dimensions: 3500 x 1300 x 1900 mm, weight 1500 kg - Year of manufacture: 1998 - Documentation available: No - Serial number: 83708 - Transport packages [pcs]: 1 Financial information VAT: The stated price is plus VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Yorick Diebels

Stav: dobrý (použitý), Funkcionalita: plne funkčný, pracovná šírka: 255 mm, hobľovacia výška: 160 mm, priemer vretena: 40 mm, šírka hobľovania: 255 mm, pracovná výška: 160 mm, výkon podávacieho motora: 3 000 W, maximálna rýchlosť vretena: 6 000 ot./min, otáčky vretena (min.): 6 000 ot./min, typ nastavenia výšky: elektrický, priemer hriadeľa zrovnávačky: 40 mm, typ vstupného prúdu: trojfázový, počet vretien: 5, vstupná frekvencia: 50 Hz, Výbava: kabína, motorová brzda, Weinig Unimat 23 E with 5 spindles, Working width: 255 mm, Working height: 160 mm, Spindle diameter: 40 mm, Gkedsxg Sa Hjpfx Aguec Feed: 3 kW / 6 – 36 m/min, Spindle arrangement: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (7.5 kW) 4-Top (5.5 kW) 5-Bottom (4.0 kW) One powered roller in the table at the outfeed.

Stav: použitý, Slotting spindle: 1 pc Number of milling units: 4 pcs Spindle diameter: 50 mm Control: Weinig, PC-Nexus 4 Weinig Unicontrol 10 CNC - spindles radial and axial CNC-controlled Machine overhauled in 2024 by Weinig factory service. Control system upgraded to Siemens S7 677 C with new membrane touch panel. Comes with the following processing units: Cross-cut saw ----- With laser alignment light, motor power 3 kW, spindle diameter 40 mm, Spindle speed: 3,000 rpm Axial adjustment via NC-axis Radial adjustment pneumatic, 8 positions for top edge rounding Bottom unit for edge rounding ----- Axial adjustment together with cross-cut saw Tenoning and slotting spindle ----- Motor power: 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Tool diameter min. 380, max. 400 mm Tool clamping length: 640 mm Axial adjustment CNC axis Axial travel: 580 mm Adjustment speed: 100 mm/sec 1st profile spindle (climb & conventional milling) ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool clamping length: 400 mm with support bearing Axial and radial adjustment via CNC axis 2nd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool clamping length: 400 mm with support bearing Axial and radial adjustment via CNC axis Horizontal profile milling unit, top ----- Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 9,000 rpm Pneumatic adjustment, 8 positions axial and radial Vertical profile milling unit, right at machine end ----- Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5,850 rpm Pneumatic adjustment, 8 positions axial and radial Additional equipment ----- CNC-controlled length stop, mounted on slot table For lengths up to 3,500 mm, incl. positioning cross-cut saw integrated in control Studio window setup, swivels 60° to both sides Paired-workpiece kit with automatic separation and handover Climb feed system with window automation for sash profiling Sash profiling cart for narrow sash widths Air conditioning unit in the control cabinet Godpfx Aew Im H Sjgujkc PC control NEXUS Automatic turning system Lamella conveyor incl. transport belt for return transport of workpieces to operator (Technical data according to manufacturer – without guarantee).

Stav: použitý, Rok výroby: 2007, Eigen hmotnosť: 1 kg Rozmery (D x Š x V): 22 x 128 x 167 cm Štvorsírový hobľovací stroj Weinig Unimat 300 5-osý stroj Rok výroby: 2007 Min./max. pracovná výška: 6/120 mm Min./max. pracovná šírka: 13/230 mm Pracovná rýchlosť: 6/12 m/min Otáčky vretena: 6000 ot./min Priemer vretena: 40 mm Dĺžka vstupného stola: 2450 mm Motory: 1. Vreteno - spodné: 5,5 kW 2./3. vreteno - ľavé/pravé: 11 kW 4. vreteno - vrchné: 7,5 kW 5. vreteno - spodné: 5,5 kW Rozmery: 4500 x 1300 x 1500 mm (D x Š x V), hmotnosť 1500 kg. - Rok výroby: 2007 - Dokumentácia k dispozícii: Nie - Prepravné rozmery: 222 mm x 1280 mm x 1670 mm (d x š x v) - Prepravná hmotnosť [kg]: 1 kg - Prepravné balíky [ks]: 1 Finančné informácie DPH: Uvedená cena bez DPH DPH/režim rozdielovej dane: DPH je odpočítateľná pre podnikateľov Doručenie a výkup kedykoľvek možné pre všetko z priemyselného sektora Gjdpfx Aswng Uqoguekc Yorick Diebels

Stav: použitý, Number of spindles: 6 pcs. Working width: 230 mm Planing height: 160 mm Surfacing table length: 1050 mm Feed motor: 7 kW Feed speed: 6–40 m/min Weinig Powermat 1200 ---- with Infeed Automation: Weinig Radmagazin EM 100, linked with Outfeed Automation: Weinig High-Mech A 1 Gksdpfx Aevnwbcsguec The machine is completely overhauled at our warehouse prior to delivery! Detailed description: ---- 1. Weinig Powermat 1200 Planer and Moulder ---- Technical data: ---- Working width: 20–230 mm (for tool diameter 93–163 mm) Working height: 10–160 mm (for tool diameter 93–163 mm) 1st spindle ---- First lower horizontal spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tool diameter: 125–180 mm With PowerLock: 93–180 mm Tool diameter rebate cutter: 130–160 mm Axial adjustment: 17 mm Rebate device MarathonCoating in front of first lower tool mounting 2nd spindle ---- First right vertical spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tool diameter: 93–200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Radial adjustment Min. tool diameter at fence level: 93 mm Max. tool diameter behind fence: 200 mm 3rd spindle ---- First left vertical spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tool diameter: 93–200 mm Straight cutter heads max.: 163 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of left tool mounting, incl. 2 spring-loaded lateral pressure rollers 4th spindle ---- First upper horizontal spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tool diameter: 93–200 mm Straight cutter heads max.: 163 mm Max. profiling depth: 35 mm Axial adjustment: 40 mm Segmented pressure shoe in front of upper tool mounting, adjustable for tool diameter and pivotable away from tool, spring-loaded. Upper spindle prepped for later cassette system installation 5th spindle ---- Second upper horizontal spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tool diameter: 93–200 mm Straight cutter heads max.: 163 mm Max. profiling depth: 35 mm Axial adjustment: 40 mm Segmented pressure shoe in front of upper tool mounting, adjustable for tool diameter and pivotable away from tool, spring-loaded. Upper spindle prepped for later cassette system installation 6th spindle ---- Second lower horizontal spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tool diameter: 93–225 mm Max. profiling depth: 15 mm Axial adjustment: 40 mm Radial adjustment Min. tool diameter at table level: 93 mm Max. tool diameter 6 mm below table: 225 mm All spindles with high concentricity precision. Lubrication points for axial tool movement. Feed system ---- Electronic feed, infinitely variable with brake, 6–40 m/min, motor 7 kW Ei...

Stav: použitý, Rok výroby: 1999, Four-sided planer Small Unimat 23 E Year of manufacture: 1999 Serial number: 88103 Feed speed: 5/24 m/min Workpiece width min./max.: 20/230 mm Workpiece height min./max.: 8/160 mm Spindle diameter: 40 mm Infeed table length: 1950 mm Grooved bed 1st spindle, bottom: 5.5 kW 2nd and 3rd spindle, right and left: 11 kW 4th spindle, top: 15 kW 5th spindle, top side: 11 kW 6th spindle, bottom: 5.5 kW Total power: 54 kW Godpfownh Sqex Agujkc Total current: 117 amps Fuse: 125 amps Transport dimensions: 4200 x 2000 x 2100 mm (LxWxH) Weight: approx. 4500 kg - Number of spindles: 5 units - Year of manufacture: 1999 - Documentation available: No - Serial number: 88103 Financial information: VAT: The stated price is subject to VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-ins possible at any time for all industrial equipment Yorick Diebels

Stav: použitý, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control system: Weinig, PC-Nexus #2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and completely inspected prior to delivery Technical Data Overview (additional included accessories on request) Pos. 1: Crosscut Saw ----- > Crosscut saw, electronic, horizontally adjustable – stepless > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide light for precise identification of saw cut > NC length stop, mounted on slot table included Positioning of the crosscut saw integrated in control > Length: 3,500 mm Pos. 2: Tenoning and Slot Spindle ----- > Number of tools: variable, stepless adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st Profiling Spindle (Conventional and Counter-Rotating) > Position: vertical, right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling Spindle ----- > Position: vertical, right > Number of tools: variable, stepless adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially controlled pneumatically, 2 positions Sash bar guide consisting of: Stop guide rail (area of conventional spindle), Sash bar support from above in the area of the vertical right profiling unit and profiling spindle. Pos. 5: Horizontal Top Profiling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool circle: 130 mm > Axial adjustment: 30 mm, 8 positions via pneumatic turret > Radial adjustment: 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical, right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions via pneumatic turret > Radial adjustment: 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool circle: 210 mm > Motor power: 3.0 kW Further Features Gjdpfx Agjvu Hfqsuokc ----- > Online-capable > Rebating device for splinter-free rebating > Dual workpiece machining package > Return feed unit for single-operator use: lamella conveyor > Screen control > Tilt window feature > Electronic angle display for tilt windows > Industrial PC, PC control/NEXUS > Weinig model production programme > Without processing tools No original pictures available yet. Photos show identical machine from our archive ----- Price of the above-mentioned machine on request! ----- Option at additional cost: EUR 6,500.00 ...

Stav: použitý, Rok výroby: 2004, Cena: na vyžiadanie Podstolová kapovacia píla Weinig Dimter Opticut S 75 Výrobné číslo: 1832.14 Rok výroby: 2004 Automatický posuv Max. výška rezu: 160 mm Max. šírka rezu: 360 mm Až do 60 m/min Rozmery stroja: 1300x1300x1700 mm (DxŠxV) Gkedownhk Hjpfx Agusc Rozmery vstupného stola: 7600x2000x1100 mm (DxŠxV) Rozmery výstupného stola: 6300x2100x1050 mm (DxŠxV) K dispozícii od 7. týždňa roku 2025 - Max. výška rezu [mm]: 160 - Rok výroby: 2004 - Dokumentácia k dispozícii: Nie - Výrobné číslo: 1832.14 Finančné informácie DPH: Uvedená cena je bez DPH Možnosť odpočtu DPH: DPH je odpočítateľná pre živnostníkov a firmy Dodanie a výkup sú možné kedykoľvek pre všetky zariadenia z priemyselnej oblasti. Yorick Diebels

Stav: použitý, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm 1 Used Weinig Unicontrol 6 Window Production Line ----- For sale on behalf of customer Manufacturer's description: For the production of single parts, assemblies, and small series. Spindle Arrangement: One crosscut saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning-slotting spindle and profiling spindle suitable for mounting multiple tools one above the other, equipped with pneumatic spindle movement. Slotting table with motor-driven table movement and automatic transfer into the continuous, chainless rubber roller drive feed of the profiling unit, feed height adjustment manual. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifier for frame or sash external dimension. Tool position control (longitudinal and cross machining) via selector switch from the control panel. Technical Data ----- Crosscut saw ----- Number of tools: 1 Spindle speed: 2,800 rpm Spindle diameter: 40 mm Max. tool diameter: 350 mm Motor: 3 kW Tenoning and slotting spindle ----- Number of tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Max. tool diameter: 320 mm Motor: 11 kW Profiling spindle ----- Number of tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Max. tool diameter: 232 mm Motor: 11 kW Special Equipment: Synchronous Spindle ----- Pneumatically actuated forward-backward movement for tear-free re-milling of window sashes, frames, and doors. Spindle diameter: 50 mm, 4 kW Tool clamping length: 120 mm, min. tool diameter 112-140 mm, Max. tool diameter: 232 mm, Spindle speed: 6,000 rpm Motor upgrade for synchronous spindle from 4 kW to 7.5 kW Screen control for 99 window types, 1 type can contain up to 8 different parts with 2 end profiles each and 2 longitudinal profiles. Manufacturing options: single parts, double parts, per frame, serial production, re-milling. Data entry via keyboard with integrated operator guidance and fault diagnosis. 1 Grooving spindle from above ----- Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm, with feather key 10 x 4 mm Mounting length: 13 mm Clamping length: 40 mm Axial indexing: 2 positions Radial indexing: 2 positions Max. tool diameter: 130 mm Motor upgrade for grooving spindle from 2.2 kW to 3 kW 1 Hardware milling unit, right side: ----- For routing the hardware groove in the re-milling operation or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch in the control panel. Gkodpfsw I Ea Dox Aguec Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool swing diameter: min. 140 mm, max. 180 mm Home position below table level: 10 mm Special design hardware milling head: Clamping length: 150 mm Axial stroke: 80 mm, 3 positions 3 tools Radial indexing: 2 positions Motor upgrade for hardware milling spindle from 2.2 kW to 3 kW Hardware milling spindle for 230 mm tool diameter at and above table height Electrical height adjustment of the feed with selector switch in the control panel for 2 wood dimensions, incl...

Stav: použitý, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm 1 used Weinig Unicontrol 6 with GLS ----- For sale on behalf of customer Technical Data Summary ----- 1. Cross Cut Saw ----- Cross cut saw pneumatic, against 8-position revolver stop Spindle speed: 2800 rpm Spindle diameter: 40 mm Max. tool diameter: 350 mm Motor power: 3 kW Laser guide for cut line detection Manual length stop 4100 mm 1. Tenoning and Slotting Spindle ----- Gedpfx Asw Im Hxjgujkc Number of tools: 3 / 4 pcs. Tool clamping length: 320 mm Vertical spindle stroke pneumatic: 240 mm for timber thickness IV 68-92 Spindle speed: 3500 rpm Spindle diameter: 50 mm Max. tool diameter: 320 mm Motor power: 11 kW 1. Profiling Spindle – Synchronous Spindle (climb and conventional milling) ----- Position: vertical right Number of tools: 1 pc. Tool clamping length: 120 mm Spindle speed: 6000 rpm Spindle diameter: 50 mm Max. tool swing: 232 mm Motor power: 7.5 kW 2. Profiling Spindle ----- Position: vertical right Number of tools: 3 / 4 pcs. Tool clamping length: 320 mm Vertical spindle stroke pneumatic: 240 mm for timber thickness IV 68-92 Spindle speed: 6000 rpm Spindle diameter: 50 mm Max. tool swing: 232 mm Motor power: 11 kW 3. Profiling Spindle (Hardware Spindle) ----- Position: vertical right Number of tools: 3 pcs. Spindle speed: 6000 rpm Spindle diameter: 40 mm Max. tool swing: 180 mm Motor power: 3 kW Clamping length: 150 mm 4. Glazing Bead Saw, horizontally/vertically indexed ----- Position: horizontal, top Number of tools: 1 pc. Tool clamping length: 40 mm Spindle diameter: 40 mm Motor power: 3 kW Axial indexing: 2 positions Radial indexing: 2 positions Additional Features ----- Scribing station to avoid tear-out\nDouble component feed Return conveyor for single-operator usage at working height: pivoting bath Screen control with 99 programs Inclined window configuration Electronic angle display for inclined windows Option Window Tooling OPPOLD Year 2013: Oppold IV 68/78/92 Timber Oppold IV 68/78 Timber-Aluminium (Technical data as provided by manufacturer – subject to change!)

Stav: použitý, Slot spindle, 0 Number of milling units, pcs. Spindle diameter, mm Number of machines, pcs. Operational dissolution woodworking (window manufacturing) ----- Machines are available immediately. All machines still set up for demonstration. Pos. 1: Weinig, PFA 17N, year 1967 Four-side planer, 6 spindles, chain drive, with glazing bead separator, with planing heads Stepless feed speed, working width 170 mm, working height 120 mm Electric height adjustment for feed beam Pos. 2: MAPO Spu 180, year 1992, veneer machine, mobile Pos. 3: Gubisch CW 2, year 1998, angle unit with return feed, with Leitz IV 68 wood, wood-aluminum; Gold IV 78 wood 1 slot spindle, 3 profile spindles Pos. 4: Götzinger OBM, year 1998, corner bearing and olive drilling machine, 1 olive drill head, 1 drill head for Roto NT corner bearing with left and right roller tables and stops, drilling on individual parts Gedpew Im Hrjfx Aguskc or glued frames Pos. 5: Panhans Type 259, year 1995, tilting spindle moulder with extended support table and frame milling fence, Haffner feed unit with 4 rollers, 3000/4000/5000/6000 rpm Pos. 6: Rapid chain mortiser Pos. 7: Klein und Söhne, combined surface planer and thickness planer Pos. 8: Filter house with silo, filtration system, fan Spänex SHB 50-250-SPS, year 1998 briquetting press with automatic control Spänex return air duct for summer/winter operation, return air ceiling filter ----- Machines must be dismantled and loaded by the buyer. Subject to errors and prior sale.

Stav: použitý, Rok výroby: 2009, max. length of workpiece 4500 mm milling spindle 1 unit main motor 20 kW control Siemens Weinig Conturex 2 C 114 ----- working width: 40-260 mm working height: 25-110 mm 2 x PowerGrip clamping tables, each 2 x 2280 mm ----- Gkodowunwyjpfx Aguoc workpiece length 200 - 4,500 mm Machining of workpieces longer than 2,700 mm is carried out via follow-up cycle Main spindle 1: ----- motor with brake 20 kW HSK 63F electronically adjustable speed 2,000-18,000 rpm maximum tool length from HSK 63F reference: 290 mm with C-axis Tool magazine: ----- number of positions: 30 position spacing: 100 mm Multi-spindle drilling head, fixed-mounted ----- for horizontal and vertical drilling and milling operations without tool change ----- Price ex site Prices for dismantling and loading onto customer’s truck transport within Germany and abroad as well as reassembly commissioning and, if required, new profiles available on request! Including used tools (drawings on request!): ----- wood: IV 68, 78, 88 inward and outward opening, with fitted weather bar wood-aluminium: IV 68/68, 78/78, 87/68, 97/78 lift-slide doors IV 68 and 78 front doors IV 68 and 78 tilt-and-turn windows Corner joint: counter/dowel Technical specifications as per manufacturer – subject to confirmation! Detailed technical description available on request!

Stav: použitý, Slot spindle, 2 pcs. Number of milling units: 8 pcs. Spindle diameter: 50 mm Control system: Weinig Nexus touchscreen Weinig Unicontrol 12 ----- For sale on behalf of the customer at a favorable price Includes tooling: Leitz IV 68/ IV 78 Wood, IV 68 Wood-Alu. Machine will remain in operation until approx. end of October 2025 ----- Technical manufacturer’s description: > Slot spindles: 2 > Profile spindles: 3 > Horizontal spindles: 3 > Max. workpiece length: 4,500 mm > Max. workpiece width: 220 mm > Max. workpiece thickness: 120 mm > Edge rounding unit > Controlled horizontal spindle > Separate gearbox groove spindle > Slot spindle: 640 mm > Profile spindle: 400 mm > Automatic top transom support > Synchronous-running spindle: 400 mm > Gearbox groove spindle: 160 mm > Total spindle stroke: 590 mm > Spindle diameter: 50 mm > Profile tool cutting circle: 140 mm > Slotting tool cutting circle: 300 mm > Infinitely variable spindle stroke > Radial spindle adjustment: NC axis, pneumatic > Electronically controlled length stop > Tilted window capability > Angle stop, miter compensation system > Equipped for rebating > Tear-out protection for rebating > Automatic counter support > Workpiece return system: longitudinal conveyor, turning station, cross conveyor > Turning system > Max. feed speed: 10 m/min > Infinitely variable feed speed Gkjdpfxew Hg T Do Aguec > PC control > Profile splitting > Dual part package > Weinig Nexus touchscreen > Required space (length x width): 14.7 m x 12.7 m ----- Including tooling: IV 68/ IV 78 Wood, IV 68 Wood-Alu. ----- Price for the above machine on request! ----- (Technical specifications as per manufacturer – no guarantee!) All prices quoted are net, plus statutory VAT.