Wfl kúpiť použité (9)

Stav: použitý, Rok výroby: 2002, Funkcionalita: plne funkčný, dĺžka sústruženia: 3 000 mm, sústružnícky priemer nad priečnym suportom: 520 mm, pojazdová vzdialenosť osi X: 600 mm, zdvih osi Y: 150 mm, zdvih osi Z: 3 150 mm, Priemer otáčania 520 mm Dĺžka sústruženia 3000 mm Ovládanie SIN 840 D Siemens z-os 3150 mm Posuv z-osi 1 - 40 000 mm/min Rýchloposuv Z-osa 40,00 m/min x-os 600 mm Posuv x-osi 1 - 30 000 mm/min Rýchloposuv X-osa 30,00 m/min Hlavné vreteno S1 Rozsah otáčok vretena 1 – 3300 ot./min Hodoxadk Djpfx Aguefn Výkon pri 100% zaťažení 29,00 kW Vretenová hlava DIN 55026 - veľkosť A11 Priemer vretena v prednom ložisku 160 mm Vretenový otvor 115 mm C-osa 360 x 0,001 ° Frézovacie vreteno S2 Upínanie nástroja Capto C6 Rozsah otáčok - plynulo nastaviteľný 1 – 6000 ot./min y-os -100 / +150 mm B-os -110 / +110 ° Nástrojový zásobník so 100 miestami Celkový výkon potrebný 145 kW Hmotnosť stroja cca 24 t

Stav: generálne opravený (použitý), Rok výroby: 2020, CNC TURNING-BORING-MILLING CENTER M50-G MILLTURN WITH SINUMERIK 840D SL CONTROL SYSTEM WORKING AREA Nominal Length: 3000 Hjdpfxewwkvwo Agujfn Swing diameter over bed/carriage: mm 670 Swing diameter over steady rest carriage: mm 670 Travel distance Z-axis: mm 3050 Travel distance X-axis: mm 800 Distance between spindle noses left-right: mm 3150 TURNING SPINDLE (LEFT/RIGHT) L // R Spindle nose DIN 55026: A11 // A11 Front bearing spindle diameter: mm 190 // 190 Spindle bore: mm 130 // 130 MAIN DRIVE (LEFT/RIGHT) L/R Drive power 40%(100%) DC: kW 55(45) Speed range: rpm 2500/1800 Max. torque 40%(100%) DC: Nm 1830(1500) C-AXIS L/R Smallest programmable increment: ° 0.0001 Max. speed range: rpm 0-287 Max. torque 100% DC: Nm 1500 Holding torque of the disc brake: Nm 4000 RIGHT TURNING SPINDLE: AC servo drive Feed force Z4-axis: kN 20 Rapid traverse speed: m/min 10 TURNING-DRILLING-MILLING UNIT (Single tool holder) Drive power 40%(100%) DC: kW 40(35) Speed range: rpm 0-5000 Max. torque 40%(100%) DC: Nm 420(480) Max. swivel torque B-axis non-indexed: Nm 1600 Max. holding torque B-axis indexed: Nm 15000 Travel distance Y-axis: mm 400[-175/+225] Swivel range B-axis: ° +/-110 Tool system DIN 69893: HSK-A100 Spindle diameter in front bearing: mm 100 TEMPERATURE STABILIZATION of the turning-drilling-milling unit via regulated cooling circuit with compressor cooling unit FEED DRIVE Feed force Z-axis 100% DC: kN 17 Feed force X-axis 100% DC: kN 14 Feed force Y-axis 100% DC: kN 16 Rapid traverse speed: Z-axis m/min 40 X-axis m/min 30 Y-axis m/min 18 B-axis °/s 96 BALL SCREW ø x pitch Z-axis 3000: mm 50x30 X-axis: mm 50x16 EXTERNAL TOOL MAGAZINE Storage locations (place encoded): 108 Max. tool diameter: non-adjacent mm 160 adjacent mm 125 Max. tool length: mm 500 Max. tool weight: kg 15 Max. tilting moment at gripper groove: Nm 20 NC STEADY REST CARRIAGE With independent drive Carriage width: mm 320 Rapid traverse speed: m/min 20

Stav: dobrý (použitý), Rok výroby: 2004, Funkcionalita: plne funkčný, číslo stroja/vozidla: 34101701, dĺžka sústruženia: 3 000 mm, sústružnícky priemer: 520 mm, maximálna rýchlosť vretena: 4 000 ot./min, otvor vretena: 77 mm, počet pozícií v zásobníku nástrojov: 100, TECHNICAL DETAILS Hfsdsvrgcdjpfx Aguen Nominal turning length: 3,000 mm Center height above floor: 1,217 mm Swing diameter over upper saddle: 520 mm Swing diameter over left telescopic section: 520 mm Swing diameter over steady rest saddle: 520 mm Main drives (left/right) Drive power: 29 kW Max. torque at 100% / 40% duty cycle: 551 / 630 Nm Main spindle left/right Spindle nose as per DIN / size: DIN 55026 / A8 Spindle diameter at front bearing: 160 mm Spindle bore: 77 mm Max. spindle speed: 4,000 rpm Upper saddle Longitudinal travel: 3,150 mm Cross travel: 600 mm (+580, -20) Rapid traverse longitudinal / cross: 40 / 30 m/min Feed force longitudinal / cross: 1,400 daN Tool magazine Number of tool stations: 100 Tool holder: HSK-A63 Turning-drilling-milling unit Drive power: 15 kW Max. torque: 125 Nm Tool holder: HSK-A63 MACHINE DETAILS Length: 9.475 m Width: 4.875 m Height: 3.120 m Weight: 21,500 kg

Stav: dobrý (použitý), Rok výroby: 1997, prevádzkové hodiny: 20 200 h, pojazdová vzdialenosť osi X: 420 mm, zdvih osi Z: 1 120 mm, CNC sústruh WFL M30 Rok výroby: 1997 Ovládanie: Siemens 840C Pojazd v osi X: 420 mm Hjdpfx Agov Ad Rysuefn Pojazd v osi Z: 1 120 mm Počet vretien: 2 Priemer vretien hlavné/proti-vreteno: 77 mm Revolver: 1 Počet revolverových staníc: 12 Uchytávanie nástrojov: Capto C4 Vysokotlakové chladenie: 20 bar Sklučovadlo na upínacie puzdrá: 2 ks 250 mm Dokumentácia

Rok výroby: 2006, Stav: dobrý (použitý), Manufacturer: WFL Austria Model: M 100 / 5000 Control: Siemens 840C Year of manufacture: 2006 MillTurn M100: Complete & complex machining – turning & milling Equipped with: - ATC 108 double chain for milling tool holders - ATC with 10 positions for boring bar holders up to 1000 mm - SCHUNK 3-jaw chuck THW 630 – 160R - SMW steady rest SLU-Z-5 50 – 310 mm Fields of application: - Aerospace - Oil and Gas - Energy - Engineering - Crankshafts - Hydraulics and Pneumatics Specifications Metric | US Standard ----- Max. turning diameter: 910 mm X-axis: 900 (+850 to -40) mm Y-axis: 500 (+300 to -200) mm Z-axis: 5370 mm Hfsdpfx Aokvndtjgujn B-axis: 200° Spindle bore: 165 mm Spindle speed: 1600 rpm Spindle power: 60 kW Tool changer: 108 positions B-axis interface: Capto C8 B-axis spindle speed: 4000 rpm B-axis power: 25 kW Chip conveyor: Yes Quill taper: 6 MK Quill stroke: 200 mm Quill diameter: 180 mm Approximate Dimensions: Length: 14,500 mm Width: 4,500 mm Height: 3,800 mm Weight: 40,000 kg Please note: The information on this page has been provided to the best of our knowledge and, whenever possible, obtained from the manufacturer. The information is provided in good faith, but the accuracy cannot be guaranteed. Accordingly, these details do not constitute a representation or contractual terms. We recommend verifying all important details.

Stav: generálne opravený (použitý), Rok výroby: 2008, WFL Millturn M120X/3000 WORKING AREA Distance between centres = 3000 mm Swing diameter over bed = 1220 mm Swing diameter over top slide = 1140 mm Longitudinal travel (Z) = 3330 mm Cross travel (X) = 920 mm Distance spindle nose to tailstock tip = 3812 mm TURNING SPINDLE Spindle nose DIN 55026, type A15 Spindle bore 165 mm MAIN DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle 60 kW Max. spindle speed 1600 rpm Hfodpfxsl Smhls Aguen Max. spindle torque 100% duty cycle 4472 Nm C-AXIS. SERVO-CONTROLLED MAIN SPINDLE Smallest programmable increment 0.001° Max. speed 20 rpm Max. spindle torque 100% duty cycle 3000 Nm Holding torque of disc brake 6000 Nm FEED DRIVE Cross slide, turning-milling-boring unit: AC servo drive Feed force longitudinal (Z) 30.0 kN Feed force cross (X) 31.5 kN Feed force Y-axis 55 kW 25.0 kN Rapid traverse: longitudinal (Z) 15.0 m/min cross (X) 15.0 m/min Y-axis 12.5 m/min Rapid traverse swiveling B-axis 90°/s BALL SCREW LONGITUDINAL (Z-axis) ø x pitch 63x20 mm CROSS (X-axis) ø x pitch 63x10 mm TAILSTOCK Quill diameter 180 mm Quill stroke 200 mm Quill force (adjustable) 5400–40000 N Quill with built-in bearing MT 6 TOOL CARRIER (Single tool carrier, turning-milling-boring unit) AC drive, drive power 100% duty cycle 55 kW Max. spindle speed 3200 rpm Max. spindle torque 100% duty cycle 730 Nm Travel perpendicular to X/Z axis (Y-axis) 55 kW 650 mm (-300/+350) Swivel range of milling spindle (B-axis) -110/+90° Spindle interface for tools DIN 69893 HSK-A100 Milling spindle diameter in front bearing 130 mm TEMPERATURE STABILIZATION via controlled coolant circuit with compressor cooling unit EXTERNAL TOOL MAGAZINE: Quantity Magazine positions (place-coded), size HSK100, 90 pcs Max. tool length 500 (800) mm Max. tool weight (center of gravity distance for 25 kg, max. 250 mm from mounting surface) DIMENSIONS Length (max., including tool magazine with chip conveyor) 13 m Height 4.1 m

Rok výroby: 2007, Stav: generálne opravený (použitý), CNC TURNING-DRILLING-MILLING CENTER M35 MILLTURN WITH TAILSTOCK AND SINUMERIK 840D PL CONTROL WORKING AREA Max. turning diameter mm 420 Longitudinal travel upper slide (Z) mm 2150 Cross travel upper slide (X) mm 550 Distance from spindle nose to tailstock tip mm 2300 Turning length (depending on clamping device) approx. mm 2090 TURNING SPINDLE Spindle head DIN 55026 form A size 8 Spindle diameter at front bearing mm 160 Spindle bore mm 77 MAIN DRIVE Built-In Motor Drive power 100%(40% duty cycle) kW 29(33) Max. spindle speed rpm 4000 Max. spindle torque 100%(40% duty cycle) Nm 550(630) TAILSTOCK MECHATRONICS Positioning via NC servo drive (Z) Rapid traverse speed m/min 10 Max. thrust force daN 1200 Tailstock with integrated center MT 5 TOOL CARRIER (Single tool carrier, turning-drilling-milling unit) AC drive Drive power 100%(40% duty cycle) kW 15(20) Hfjdom H Tutjpfx Aguen Max. speed rpm 9000 Max. spindle torque 100%(40% duty cycle) Nm 125(165) Max. swiveling torque of the B axis Nm 900 Travel perpendicular to X/Z plane (Y axis) mm 250[-100/+150] Swiveling angle of the milling spindle (B axis) ° +/-110

Stav: generálne opravený (použitý), Rok výroby: 2007, dĺžka sústruženia: 5 200 mm, sústružnícky priemer nad priečnym suportom: 1 140 mm, sústružnícky priemer: 1 140 mm, výkon motora vretena: 90 000 W, maximálna rýchlosť vretena: 1 000 ot./min, otvor vretena: 245 mm, pojazdová vzdialenosť osi X: 920 mm, zdvih osi Y: 650 mm, zdvih osi Z: 5 370 mm, montážny priemer: 100 mm, otáčky (max.): 3 200 ot./min, krútiaci moment: 730 Nm, nos vretienka: B20, Výbava: otáčky plynule nastaviteľné, WFL Millturn M120/5000 CNC sústružnícko-vŕtaco-frézovacie centrum typu M120 MILLTURN s koníkom a riadením SINUMERIK 840 D Hfodpfx Asul S Eyjguon

Stav: generálne opravený (použitý), Rok výroby: 2009, Funkcionalita: plne funkčný, číslo stroja/vozidla: 30214501, dĺžka sústruženia: 2 000 mm, celková dĺžka: 12 000 mm, WFL Millturn M60-G/2000 WORKING RANGE Distance between centers: 2000 mm Swing diameter over saddle: 480 mm MAIN DRIVE AC drive with 2-speed gearbox Drive power (100% duty cycle): 60 kW Max. spindle speed: 2600 rpm Max. spindle torque (100% duty cycle): 2748 Nm COUNTER SPINDLE DRIVE AC drive with 2-speed gearbox Drive power (100% duty cycle): 40 kW Max. spindle speed: 3300 rpm Max. spindle torque (100% duty cycle): 1830 Nm Hfedsu Hl R Tjpfx Aguen TOOL CARRIER (Single tool turret, turning-drilling-milling unit) AC drive, drive power (100% duty cycle): 25 kW Max. spindle speed: 4000 rpm Max. spindle torque (100% duty cycle): 300 Nm Travel perpendicular to X/Z plane (Y-axis): 300 mm [-125/+175] Swivel angle of milling spindle (B-axis): -110/+90° Spindle interface for tools according to DIN 69893 HSK-A63 Spindle diameter at front bearing: 100 mm DIMENSIONS Length (incl. max. tool magazine and chip conveyor): 11*12 m Width/Height: 4.2/3.5 m