Zváranie Odbočka Zariadenia kúpiť použité (19 146)

Rok výroby: 2015, stav: použitý, Zvárací polohovadlo KT, nosnosť 3000 kg Kompletne vybavené všetkým príslušenstvom vrátane ručného a nožného diaľkového ovládania. Ledpfx Ascqxxgjqpjrp Plynulo nastaviteľná rýchlosť otáčania a naklapania. Napájanie: 380 V, 1,5 kW Priemer stola: 1400 mm Rozsah otáčania: 0,05 až 5 ot./min. Rozsah naklonenia: 0 až 120° Rozmery (d x š x v): 2100 x 1400 x 1200 mm Hmotnosť: 3500 kg Doprava v rámci celého Nemecka: 450 €

Rok výroby: 2018, stav: ako nová (výstavný stroj), Welding turntable KT 50 Load capacity horizontal: 50 kg, tilted: 25 kg Power supply: 220V, 50 Hz Table diameter: 320 mm Table height: 400 mm, tilted to center: 300 mm Length: 650 mm, width: 650 mm Tilting range stepless via crank gear motor: 0 – 90° Speed: 1.7 – 15 rpm Including foot remote control Ledjd A Etyjpfx Aqporp

Rok výroby: 2022, stav: nový, Zvárací zápustkový stôl s nosnosťou 3000 kg, veľmi robustný Rýchlosť plynule nastaviteľná od 0,05 do 0,7 ot./min Priemer otočného stola 1400 mm Lrodpfx Aqjfxphlepsp Náklon až do 120° Výška v horizontálnej polohe 1300 mm, pri sklone do stredu 1050 mm Dĺžka 2,0 m x šírka 1,4 m Ručné diaľkové ovládanie s digitálnym displejom a nožné diaľkové ovládanie

Rok výroby: 1990, stav: dobrý (použitý), Zvárací otočný stôl s nosnosťou 2 tony s ručným a nožným diaľkovým ovládaním Rýchlosť a naklonenie sú plynule nastaviteľné Dobrý stav, stroj je robustný a nezničiteľný Výška v naklonenej polohe po stred: 1,05 m Ljdjfxq U Nepfx Aqpjrp Výška v horizontálnej polohe: 1,3 m Priemer: 1,3 m Dĺžka: 2,2 m Šírka: 1,4 m Rýchlosť od 0,01 ot./min do cca 1,0 ot./min

Rok výroby: 2018, stav: dobrý (použitý), Zvárací otočný stôl KT 300 Nosnosť horizontálne 300 kg, naklonený 150 kg Príkon 220V, 50 Hz Priemer stola 450 mm Výška 500 mm Uhol náklonu plynule nastaviteľný cez kľukový prevodový motor 0 – 90° Rýchlosť 0,3 – 2,5 ot/min Ledeb Dg Aropfx Aqpjrp Vrátane nožného diaľkového ovládania Príplatok: Rýchloupínacie skľučovadlo Priemer 300 mm, 450 €

Stav: nový, Rotátor na zváranie s nosnosťou 2000 kg, výškovo nastaviteľný Lrjdpfx Aqedvn E Eepjp veľmi robustný Plynulá regulácia otáčok od 0,05 do 0,7 ot/min Priemer zváracieho stola 1200 mm Naklápanie až do 120° Celkový zdvih výškového nastavenia 600 mm Výškové nastavenie od 1450 mm do 2050 mm Minimálna výška v horizontálnej polohe 1350 mm, v naklonenej polohe do stredu 1200 mm Maximálna výška v horizontálnej polohe 1850 mm, v naklonenej polohe do stredu 1700 mm Diaľkové ovládanie ručné a nožné

Stav: použitý, 600 kg welding turntable, electrically tiltable Available immediately, Model KT 600 / 380 V Connection: AC 380V, frequency-controlled Load capacity (horizontal/vertical): 600 kg / 300 kg Rated center of gravity: 250 mm Rated eccentricity: 150 mm Ledpfxs Tic Rj Aqperp Table diameter: 1000 mm Speed range: 0.1 – 1.2 rpm Rotation motor: 370 W Tilt motor: 550 W Dimensions: 1200 x 1100 x 850 mm

Stav: dobrý (použitý), Zvárací otočný stôl KT 300 Nosnosť horizontálne 300 kg, naklonený 150 kg Príkon 220V, 50 Hz Priemer stola 450 mm Lodpfx Aqeb Am Tgsperp Výška 500 mm Uhol náklonu plynule nastaviteľný cez kľukový prevodový motor 0 – 90° Rýchlosť 0,3 – 2,5 ot/min Vrátane nožného diaľkového ovládania Príplatok: Rýchloupínacie skľučovadlo Priemer 300 mm, 450 €

Rok výroby: 2022, stav: nový, 3000 kg zvárací polohovadlo, hydraulicky výškovo nastaviteľné Rýchlosť 0,05 až 0,8 ot./min Lrjdpfx Aqjff Ngispep Veľmi robustné, kompletná súprava s ručným a dvojitým nožným diaľkovým ovládaním Priemer stola 1200 mm Sklon 0 až 120° Celkový rozsah nastavenia výšky cca 700 mm Výškové nastavenie pri zvislom kotúči po stred 960 mm ~ 1910 mm Rozmery pri vodorovnom kotúči 1200 mm až 1900 mm Polohovadlá ponúkame s nosnosťou 600 kg, 1000 kg, 3000 kg, 5000 kg

Rok výroby: 2019, stav: ako nová (výstavný stroj), Zvárací polohovač s nosnosťou 600 kg, výškovo nastaviteľný Rýchlosť plynulo nastaviteľná od 0,05 do 0,7 ot./min Priemer otočného stola 1200 mm Naklápanie do 120° Výškové nastavenie od 1450 mm do 2050 mm Ručné a nožné diaľkové ovládanie Lodpjd A Et Hsfx Aqpjrp

Prevádzkové hodiny: 10 h, stav: dobrý (použitý), 1000 kg load capacity height-adjustable welding positioner with 200 mm through-hole Table diameter 900 mm Ljdpfedn D U Nex Aqporp Horizontal height min. 0.8 m, max. 1.6 m Tilted height min. 0.6 m, max. 1.4 m Speed from 0.1 – 1.1 rpm Length 2000 mm Width 1000 mm Tilting angle up to 135° Hand and foot remote control with speed display Very robust design

Stav: dobrý (použitý), Zariadenie na otáčanie nádrží Protec-Schweisstechnik Ljdsc Ny S Nepfx Aqperp Nosnosť 1000 kg S nožným diaľkovým ovládaním Rýchlosť od 80 do 1600 mm/min Priemer od 20 do 700 mm

Rok výroby: 2017, stav: veľmi dobrý (použitý), 100 kg nosnosť, zvárací otočný stôl Rýchlosť od 0,12 do 1,2 ot/min Priemer dosky 400 mm Neustále nastaviteľný uhol naklonenia Ledpfxedt Rhae Aqpsrp Vrátane nožného diaľkového ovládania

Stav: takmer ako nový (použitý), Rok výroby: 2019, Protec KT 3000 HV, hydraulicky nastaviteľná výška Nosnosť 3000 kg Ručné diaľkové ovládanie s digitálnym displejom Dvojitý nožný ovládač Výška cca min. 700 mm vo vodorovnej polohe, max. výška 1400 mm Priemer upínacej dosky 1400 mm Minimálny uhol naklonenia 135° Lrodpsd Ig H Aefx Aqpjp Rýchlosť 0,05 až 0,6 ot/min Výkon motora 3 kW

Rok výroby: 2007, stav: veľmi dobrý (použitý), Approx. 11,000 anti-push-through safeguards for SSI Schäfer R 3000, for bay width 1.28m – used - : Price per unit: €2 (net)! Minimum purchase: 200 units! Manufacturer: SSI Schäfer Model: R3000 Year of manufacture: 2007 For bay widths of 1.28m Condition: good Lrsdpfxjg Rmf Es Aqpsp Available: immediately Location: Frankenberg warehouse

Stav: veľmi dobrý (použitý), Rok výroby: 2009, Funkcionalita: plne funkčný, Vodou chladené, pneumaticky ovládané bodové zváracie kliešte Nimak L123 Veľmi dobrý použitý stav, plne funkčné. Umiestnenie položky: 75053 Gondelsheim Lrjdpfsxmuyvex Aqpop Pozrite si obrázky Doprava spedičnou službou alebo osobný odber

Stav: použitý, Rok výroby: 2015, Ponuka 26163 Technické údaje cca: - Max. priemer obrobku 80 mm - Výsun 70 mm - Zvárací horák na stojane nastaviteľný v osiach X, Y, Z Lrsdpszg A Riofx Aqpep - Posuv stojana ručným kolieskom 500 mm - Výsun stojana 70 mm - Vzdialenosť medzi hrotmi 600 mm - Koník s pneumatickým prítlačným hrotom - Trojčeľusťové skľučovadlo 100 mm - Ručný diaľkový ovládač - Prepojovací kábel - Pneumatická prípojka - Stolová podstava Š 2000 x V 850 x H 700 mm - Nároky na priestor cca. Š 1150 x V 650 x H 500 mm - Hmotnosť cca. 200 kg

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Lodpfx Aqsfz Dubeperp Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, 7-inch touch panel The large color touch panel makes parameter input even easier and more convenient. 5 programs with 50 steps each It is possible to program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Information about gas and oil consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate the consumption and cost of each firing process. USB storage Every firing process is logged, and the data can be transferred to a USB stick for analysis on a PC. Each file is automatically created for a single firing process, recording extreme temperatures and exact timing. Files are saved in *.csv (Excel spreadsheet) format. For all customers until the end of 2016, this feature is free of charge. At other companies, this can cost several thousand euros. Storage of the last 20 firing processes Is something wrong? Did too few items come out of the kiln? Now you can check the exact parameters of the firing process, such as duration or potential issues. New! Timer It is possible to set the start time, allowing the kiln to turn on automatically before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction system can be programmed to open a few minutes before the end of the firing process to vent smoke from the chamber. The smoke extractor can also be controlled via the touch panel. Process duration timer Using the heating dynamics, the process duration is calculated and the end time of the firing process is displayed. Lrjdefz Apqopfx Aqpep Self-closing doors To open, simply pull the door. To close, just push—it will close automatically. Exhaust hood above the door (optional) To minimize hall heating caused by opening the door, an exhaust hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for customers purchasing a large kiln who wish to use only part of the kiln. The oven is equipped with a movable partition wall and dedicated control system. 2 in 1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. Lrodpofz Dt Nsfx Aqpep - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Ledpfxofz I D Ds Aqporp Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. Lrodofz I Edspfx Aqpop The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, 7-inch touch panel The large color touch panel makes parameter input even easier and more convenient. 5 programs with 50 steps each It is possible to program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Information about gas and oil consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate the consumption and cost of each firing process. USB storage Every firing process is logged, and the data can be transferred to a USB stick for analysis on a PC. Each file is automatically created for a single firing process, recording extreme temperatures and exact timing. Files are saved in *.csv (Excel spreadsheet) format. For all customers until the end of 2016, this feature is free of charge. At other companies, this can cost several thousand euros. Storage of the last 20 firing processes Is something wrong? Did too few items come out of the kiln? Now you can check the exact parameters of the firing process, such as duration or potential issues. New! Timer It is possible to set the start time, allowing the kiln to turn on automatically before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction system can be programmed to open a few minutes before the end of the firing process to vent smoke from the chamber. The smoke extractor can also be controlled via the touch panel. Process duration timer Using the heating dynamics, the process duration is calculated and the end time of the firing process is displayed. Self-closing doors Lredpfx Aqofzkrnepsp To open, simply pull the door. To close, just push—it will close automatically. Exhaust hood above the door (optional) To minimize hall heating caused by opening the door, an exhaust hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for customers purchasing a large kiln who wish to use only part of the kiln. The oven is equipped with a movable partition wall and dedicated control system. 2 in 1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. Lrjdpfx Aqeflmdwepep In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors Ledpfx Aqefz Nb Tspsrp The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.