Horizontálny navíjací stroj

Mubea Meister

Stav: použitý, Sheet width: 4080 mm Sheet thickness: 2.0 mm (mild steel) Sheet thickness for stainless steel: 0.8 mm Sheet thickness for aluminum: 2.5 mm Cutting angle: 1.3 degrees Strokes: 34 strokes/min Frame gap: 4310 mm Backgauge - adjustable: 15.0 - 750 mm Table height: 820 mm Control: ELGO Motor power: 9.0 kW Machine weight approx. 3600 kg Dimensions (L-W-H): 5250 x 2200 x 1400 mm In very good condition (!!) Current list price: approx. €70,000 Special price on request The MHSU motorized guillotine shear is based on a torsion-free, rigid welded frame construction and a dynamic, low-noise, high-performance gear motor. The high static and dynamic rigidity is ensured by generously dimensioned main components such as the cutting beam, support table, side frames, and main drive unit. This motorized guillotine shear has been developed for sheet metal and plastic processing. With this shear, you can achieve precise, clean serial cuts with ease. Equipment: - NC robust electro-motorized guillotine shear “swing cut” - with ELGO NC control unit * digital position display for backgauge * adjustable from the front right * with nominal/actual value input * infinitely variable adjustment across the full travel range * safeguarded limit values with limit switch - NC electro-motorized material/backgauge - shatterproof, torsion-free welded steel frame construction Kdedjxabc Rjpfx Anust - compact and accessible machine design - feed table with grip recesses - 1x hold-down beam - 1x side stop with T-slot and scale - 3x front support arms - 1x movable foot switch - Operating manual Special accessories included: - pneumatic sheet support device for thin sheet cutting

Stav: nový, Rok výroby: 2025, Funkcionalita: plne funkčný, otvor pílového kotúča: 40 mm, Výbava: dokumentácia / manuál, Pozdĺžna a pokosová okružná píla Typ: ZS 170N Motor: 400 V / 2,0 kW Otáčky: 3500 ot./min Dĺžka rezu: 410 mm (pri 90°) Výška rezu: 170 mm (pri 90°) Rozsah pokosu horizontálne: 45°-90°-25° Kdjdjypwhpepfx Anust Rozsah pokosu vertikálne: 90°-45° (vľavo) Priemer pílového kotúča: 420 mm Priemer odsávacieho hrdla: 100 mm Hmotnosť: 120 kg

Stav: použitý, Rok výroby: 1992, Funkcionalita: plne funkčný, číslo stroja/vozidla: 511001M, menovitý výkon: 160 kW (217,54 k), Kompletný a plne funkčný Lindemann ZB 120 x 100 - 160kW Schorch pohon - Voith hydrodynamická spojka - podávací oceľový pásový dopravník Kodpfx Asyizcqenuodt - vibračný extraktor Cyrus - sťahovák osí - hydraulická jednotka - náhradné rošty - kladivá - rôzne opotrebiteľné diely

Stav: nový, ako aj ďalšie typy, ako balík Kedpjf Ddzqofx Anujdt

Stav: nový, Rok výroby: 2024, Automatic length measuring and positioning system for all STROMAB crosscut saws, as well as similar machines from other manufacturers. It serves both as a stop and for workpiece positioning. Consists of: Aluminium profile 105 x 90 mm, anodised 32 mm toothed belt drive, reinforced with steel wire Stepper motor 6 Nm, multi-voltage 115 - 230 V - 50/60 Hz Kdedpfx Aexraucsnuot Repeat accuracy +/- 0.1 mm Positioning speed 60 m/min. Control unit Type SMART 7 with 7-inch touch screen Absolute and incremental machining mode 8 preset standard values 2 software versions with different optimisation levels optionally available. ZM 415 – Usable working length 4,500 mm ZA333 – Roller table 4,500 x 280 mm, roller diameter 32 mm ZA341 – Front support 4,500 x 260 mm ZA373 – Interlock cable for customer’s own crosscut saw

Stav: nový, Špecializovaný stroj určený na vytváranie priamej drážky alebo zárezov do rôznych typov drevených materiálov, používaných v bežnej stolárčine, pri výrobe záhradného nábytku, záhradných domčekov, väzníkov a panelovej výstavbe. Ďalej je vhodný aj na výrobu dverových rámov, zárezov do strešných väzníc a výrobu zrubových chát. Štandardne je zariadenie vybavené horizontálnymi pneumatickými upínacími prvkami a tlmiacim systémom Hydrocheck pre plynulý pohyb rezných hláv. Kedpfxody Hm Do Anuodt Presné guľôčkové vedenie na tvrdených oceľových koľajničkách. Odolná liatinová konštrukcia s oceľovým rámovým stojanom. Motor s výkonom 3 kW. Maximálny priemer nástroja: 250 mm. Upínací otvor nástroja: 40 mm. Ručné výškové nastavenie ramena motora pomocou ručného kolesa. Maximálna hĺbka drážky/zárezu: 60 mm. Šírka drážky/zárezu: 60 mm – jedným pracovným prechodom. Maximálna dĺžka posuvu nástroja: 250 mm. 2x horizontálne upínače obrobku. Hydrocheck tlmič pohybu priečneho ramena. Odsávací hrdlo: 100 mm. Stroj je dodávaný so stojanom.

Stav: takmer ako nový (použitý), Rok výroby: 2024, Cantilever racking, double-sided, used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided uprights, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm deep, standard - Includes horizontal and diagonal bracing for 1,300 mm bay spacing - Incl. mounting material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts re-orderable and extension possible at any time) - (Also available in larger quantities: 20 uprights in stock) Kjdpfsh Ek Dajx Anuedt Detailed description: - Robust steel construction made from IPE profiles - Surface protection: all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolted cantilever arms and 2 base sections of 1,200 mm depth per upright, standard = 4 storage levels per upright side - Includes horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with notified delivery. The material is optimally packed for easy unloading. When installing outdoors, the load capacities are reduced by wind and snow loads. The base must be concrete, flat, suitable for dowels, and capable of bearing the applied loads. The ground conditions, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The uprights are to be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the trade association, it is recommended that the uprights have at least a 500 mm projection above the top storage level.

Stav: takmer ako nový (použitý), Rok výroby: 2020, Metallkraft Sickenbiegemaschine SBM 140-12 E Motorická zinkovacia ohýbačka so strojovým podstavcom, ovládacím pultom a dorazovou doskou na výrobu rôznych tvarov a hĺbok zinkovacích profilov. Dĺžka valcov: 140 mm Ohýbacia kapacita ocele 400 N/mm²: max. 1,2 mm* Valce: Ø 62 mm Hĺbka otvoru: 100 mm Kjdpfx Ajxqp R Renuodt Rýchlosť valcov: 8 m/min Výkon motora: 0,75 kW | 400 V - 50 Hz Stupeň krytia: IP 55 Rozmery (DxŠxV): 900 x 1350 x 450 mm Hmotnosť (netto): cca 110 kg Vrátane štandardných valčekov S1-S8 a kľúča na náradie Predvádzací stroj, použitý 1x

Rok výroby: 2009, stav: dobrý (použitý), • Plne automatický • Max. výška balíka (mm): 650 • Min. výška balíka (mm): 15 • Max. šírka balíka (mm): 1250 • Min. dĺžka balíka (mm): 300 • Vstupný pás (mm): cca 2.000 x 1.300 x 900 Kdsdpfx Ajpu Anmonuet • Výstupný pás (mm): cca 2.000 x 1.300 x 900 • Výstupný stôl • Celkové rozmery (mm): cca 8.000 x 3.000 x 2.200 • Celkový pripojovací výkon (kW): cca 5

Stav: nový, Rok výroby: 2020, Clamping force 600 kN Clamping plate 460x460 mm Tie bar spacing 300x300 mm Clamping stroke 230 mm Ejector stroke 70 mm Ejector force 40 kN Mold height 120-350 mm Tie bar diameter 56 mm Die casting force 54 kN Die casting stroke 130 mm Plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 109, 150, 194 cm³ Specific casting pressure 339, 274, 226 daN/cm² Associated parting surface 176, 218, 264 cm² Machine weight approx. 3.5 t Machine Equipment 1.0.1 Clamping unit cover on machine baseframe 1.0.2 Clamping unit cover on baseframe for scale / chute 1.1.0 Motorized safety door to the left in casting direction 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – Energy efficiency 2.0.1 Ejector advantage package 2.4.2 Ejector plate safety on mold side 2.6.4 SensiLock® machine assistance system 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for piston accumulator 3.2.4 Multi-chamber holding and melting furnace Kdedpjiu Smbofx Anust 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-fill casting system 3.4.5 Simplified plunger removal 3.4.6 Plunger stop on return stroke 3.5.2 Electric nozzle and casting pot heating 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Equipment package – Casting comfort 5.2.1 Ejector pressure graph 5.4.1 Scope data acquisition 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction unit 6.1.4 Serial interface for 4 heating/cooling circuits 6.3.1.1 Operator unit with visualization on support arm 6.5.2 RSD equipment package with switch 7.0.0 ADDITIONAL DEVICES 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent container TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Noise-attenuated reject chute OF70 70 years FRECH – Anniversary package