Kanálový lis na balenie

Paal Konti 325 G

Stav: dielensky repasované (použité), Rok výroby: 2007, prevádzkové hodiny: 22 605 h, Funkcionalita: plne funkčný, lisovacia sila: 100 t, šírka plniaceho otvoru: 1 100 mm, dĺžka plniaceho otvoru: 1 600 mm, šírka balíka: 1 100 mm, výška balíka: 1 100 mm, hmotnosť balíka: 1 400 kg, vstupný prúd: 238 A, celková hmotnosť: 36 000 kg, kapacita olejovej nádrže: 1 300 l, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data - Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed chute dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connection rating: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk densities: Iiodpsvf E Avjfx Ac Noa - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank volume: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions, baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight (baler only): approx. 36 t Notes: The baler has been partially overhauled, serviced in our workshop, tested upon completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works were carried out: - Derusting and partial repainting of the baler - Hydraulic oil tank drained, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press lid cylinders, and press channel cylinder disassembled, inspected, honed, all seal kits renewed, and final pressure test performed - Pre-press lid with bearings and bearing housings dismantled. 1st and 3rd arc segments removed and newly welded - Both bearings of the pre-press lid shaft replaced - Upper material deflector on pre-press lid frame replaced - Press ram dismantled, checked, and both front rollers renewed - Material deflector and wear profiles on sides and bottom of press ram removed and newly welded - Horizontal and vertical needle and tying units dismantled, checked, plastic slide plates, driller shaft bearings, and wire guide pulleys in the needle heads replaced - Both brass slide rails on left and right cover of the press ram replaced - Both wire deflection units with bale retention clamps completely renewed - Wire inserting unit including hydraulic cylinder below needle guides completely renewed - Wire inlet grooves on floor and side walls of press channel welded and smoothed - General maintenance and service work carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored No liability is assumed for the technical data or possible mistakes.

Rok výroby: 2015, stav: veľmi dobrý (použitý), Priama hĺbkotlač (Direct gravure type) Proces nanášania povlaku na fóliu alebo hliník pomocou povlakovacej látky alebo laminácie s iným substrátom. Linka na lakovanie na báze vody alebo rozpúšťadla s integrovaným laminátorom na báze rozpúšťadla Šírka produktu: max 1 700 mm Spracovateľné materiály: 9–50 µm (PET), 10–60 µm (CPP), 10–70 µm (OPP), 20–100 µm (hliník) Rýchlosť: 300 m/min (bežná prevádzka 50–250 m/min) Priemer návinu: max 900 mm Napínanie pri odvíjaní: 100–1 000 N Priemer odvíjania: max 1 000 mm (3", 6") Napínanie pri navíjaní: 100–1 000 N Ijdpfx Aewp Sauec Nsia Teplota sušenia: max 230 °C (4 m x 6 zón)

Stav: dobrý (použitý), Rok výroby: 2012, Funkcionalita: plne funkčný, Baler Dixi 60 SLD, Year of manufacture 2012 Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 60 SLD Year: 2012 Drive power: 7.5 kW, 400 V / 32 A Filling opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Material: Paper, cardboard, film Iiedjybazispfx Ac Noa Please note: All technical data are based on the manufacturer's specifications. We assume no liability for the given information or for any possible errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex works, against advance payment, without warranty or guarantee.

Rok výroby: 2013, prevádzkové hodiny: 3 707 h, stav: použitý, pohotovostná hmotnosť: 7 331 kg, zdvíhacia výška: 6 600 mm, voľný zdvih: 2 060 mm, typ stožiara: triplex, stavebná výška: 2 980 mm, dĺžka vidlíc: 2 400 mm, šírka nosiča vidlíc: 1 400 mm, typ pohonu: Diesel, nosnosť: 5 000 kg, šírka konštrukcie: 1 510 mm, Diesel forklift Load center: 500 mm Fork width: 130 mm Fork thickness: 60 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Diesel-electric Condition: Ready for operation and fully functional Technical condition: Good Front tires type: Superelastic Front tires size: 355/50-15 Front tires condition: 40 - 60% Rear tires type: Superelastic Rear tires size: 250-15 Rear tires condition: 60 - 80% Iisdpfst Ilq Isx Ac Noa Description: Full cabin with heating, lighting similar to road traffic regulations, 3rd and 4th hydraulic valve to the fork carriage, work lights front and rear, rotating beacon, 2x cross lever, single-pedal control, sideshift, 3rd valve, 4th valve, rear work light, front work light, heating, full cabin, full free lift, interior mirror, exterior mirror, joystick, rotating beacon, wiper, single-pedal control, LED, seat,