TLAČTE BRZDU

Placke HQPB M4 125 to. x 3.100 mm

Built for a world-leading cooperation partner.

Last machine from the pool.

Machine is in as-new condition.

The High Quality Press Brake, or HQPB for short, is the flagship model among Placke press brakes. The entire manufacturing process, from the hydraulic cylinder to the control cabinet, takes place in-house. By utilizing state-of-the-art technology combined with years of experience in forming technology, the HQPB series enables high-precision bending at the top level. Even the standard base configuration is a fully functional press brake. This combination of safety, reliability, and efficiency—paired with user-friendly operation—allows us to meet the highest demands and precision in the bending process.

Machine frame:
- Base machine constructed from steel S 355 N
- Side frames welded with 2 pressure pipes and overhead oil tank
- Above-floor design
- Coated with 2-component structured paint, light grey (RAL 7035) and signal grey (RAL 7004)

Upper beam:
- Press beam stress relieved by annealing
- Immersion depth measurement, read head guided by ball roller guide
- Separate Y1 and Y2 control; electrical tilt monitoring

Hydraulic system:
- Hydraulic proportional control valve system with electronically monitored cylinder synchronization
- Solid steel cylinders with inductively hardened piston rods
- Low-noise internal gear pump

Punch clamping:
- Upper tool holder system WILA, hydraulic clamping system type NSCL-II-HC, fully hardened. Max. load: head-bearing = 250 t/m, shoulder-bearing = 300 t/m

Lower beam:
- Narrow bed including manual clamp bar, dimensions: 95 mm high, 95 mm wide
- Centrally adjustable crowning device, WILA system, CNC-controlled, NSCR-I-MC, with 2 mechanically adjustable wedge bars for deflection compensation
- Single-V die holder (13x20)
- Working height: 1050 mm (with 55 mm tool height)

Front of the machine:
2 aluminum support arms at the front, approx. 600 mm long, including 2 flip stops, measuring tape, and wear-resistant plastic strip. The support arms are adjustable along a ball rail guide and can be height-adjusted via slot from 55 mm to 100 mm for die installation. The ball rail guide is milled into the lower beam.

Control and automation technology:
- Operating voltage 400V / 3Ph / 50Hz
- Switching and safety components by Telemecanique
- Backgauge with AC servo technology
- Pilz safety PLC

Backgauge "2-axis controlled":
- X- and R-axes CNC controlled
- Z-axis manual

Delem DA 66 Touch control panel on swing arm, including Profile S-Lite offline programming software.

Safety equipment according to CE standards

Technical specifications and working range:
Press force 1250 kN
Working length 3100 mm
Clearance between frames 2600 mm
Installation height 450 mm
Throat depth 305 mm
Godpfxsw Nhhgs Agujuh
Ram stroke 265 mm

Ram speeds:
Rapid approach max. 220 mm/s
Pressing speed max. 9.8 mm/s
Return speed max. 160 mm/s
Ram positioning accuracy ± 0.01 mm
Ram tilt ± 10 mm
Electronically limited to ± 5 mm
Height of lower beam above floor 900 mm
Motor power 11 kW

Main dimensions:
Depth below floor 0 mm
Floor recess for side frames 0 mm
Machine weight approx. 9.5 t
Tank capacity (hydraulic oil) 290 l

(Technical modifications reserved)

Illumination behind the machine:
Work area illuminated with LED strip between the side frames.

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.