Meracia doska

PLANOLITH Messtisch 3000 x 2000 x 930mm

Stav: nový, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw blade length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx. 8.45 t Dimensions L x W x H: 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top cutting technology and maximum performance when machining special steels. - The electro-welded machine frame and steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and its speed is adjustable. - All movements of the machine (saw frame, vice, feed, blade guides) are carried out via modern linear guides with high static and dynamic load capacity, ensuring extremely low sliding friction as well. - Another distinctive feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - With the height control of the band saw position, the operator can place the blade close to the top of the material. After the cut, the blade automatically returns to its previous position. Alternatively, you can select the option to remain in the lower position. During the cutting cycle, the software compares cutting load with preset values and can stop the sawing system in case of irregularities. - The saw blade is cleaned by two adjustable steel brushes, driven hydraulically. - The hydraulic unit, including filter and manometer, ensures particularly smooth operation at consistent pressure. - Precision-ground carbide inserts securely clamp the blade, complete with side-hardened and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. Gsdpfxofg E Hpo Aftsil - The saw blade is tensioned by a hydraulic cylinder, which is controlled by the machine’s software. Tension is automatically released after a set time in idle or after a cycle is completed. - Automatic version with CNC control available in X-TECH 900 / 1200 models for high production rate series, featuring a feed length of 500 mm. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor for precise material positioning even under maximum load. - All guided movements are powered by four recirculating ball guides with high capacity for both static and dynamic loads, ensuring drastically reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stav: dobrý (použitý), Rok výroby: 2000, Výrobca: KUKA Typ: KR 350/2 Giedpfx Afeh Dwr Ujtel Rok výroby: 2000 Čistá hmotnosť: 1870 kg Bez káblov a riadiacej skrine. Doplnok k meracej správe!

Stav: dobrý (použitý), Rok výroby: 1978, max. hrúbka mosadzného plechu: 3 mm, Motorized Folding Machine Make: Lotze Model: HZ – 2500 x 3mm Year: 1978 Technical Data Manufacturer: Lotze Model: HZ-25 Year of manufacture: 1978 Working length: 2500 mm Sheet thickness: max. 3 mm Equipment - Bending angle adjustment via potentiometer - Tool package including sharp rail, bending rails, reinforcement rails - Manually adjustable back gauge Gijdpfsrc E S Ejx Aftol All information subject to change.

Stav: nový, Sheet width 2050 mm Sheet thickness 3 mm Frame width 2100 mm Godpfx Afsfv H Dketoil Backgauge – adjustable 600 mm Connected load kW Machine weight approx. 1.1 t Dimensions (L x W x H) 2.7 x 2.1 x 1.4 m The machine operates with low noise levels and is energy-efficient thanks to its geared motor with braking system. Our machine is manufactured as a monoblock body, welded from ST42 quality material. The blades of the machine are 2379 quality, supplied by the brand BOHLER. These high-quality blades ensure precise cutting. Emergency-stop button, foot switch, and finger guard are included as standard equipment. (Documentation available in English only)

Stav: dobrý (použitý), Mramorová platňa Dĺžka: 3500 mm Šírka: 1500 mm Hrúbka: 300 mm Výška na nohách: 930 mm Počet nôh: 5 ks Gisdpsig Hu Njfx Aftsl 1 menšia vada na hornej strane (dĺžka 150 mm x šírka 20 mm) – viď foto Hmotnosť: cca 3 t

Stav: nový, Cutting range at 90 degrees: round 350 mm Cutting range at 90 degrees: square 330 mm Cutting range at 90 degrees: rectangular 500 x 310 mm Blade speed: 15 - 100 m/min Table height: 844 mm Gsdpfx Aefg E Hlefteil Saw blade dimensions: 4250 x 34 x 1.1 mm Total connected load: 2.2 kW Machine weight approx. 1.2 t Space requirement approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column double mitre band saw K-tech DG 50/33 HA-I • 2-Column mitre saw • Solid yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to angled cuts, feed regulator + cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning/disinfection) • Energy-efficient and low-vibration due to angled cuts • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 - 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs to monitor all safety functions • Oversized drive wheels (520 mm) each • Clear mitre adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid-feed lowering to material start or for batch cutting, direct cut 4. Saw blade off 5. Raise frame just above material 6. Open vise

Stav: použitý, Dĺžka: 1800 mm Šírka: 1200 mm Hmotnosť stroja cca: 1,6 t Priestorové nároky cca: 1,8 x 1,2 x 0,4 m Gisdpfecxxu Dox Aftol - Meracia doska s 5 špeciálnymi nohami - dobrý stav

Stav: veľmi dobrý (použitý), Rok výroby: 2014, First commissioning: 2014 Control system: Heidenhain iTNC 530 HSCI incl. HR 520 handwheel Machine hours Machine powered on: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives Rapid traverse speed X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Connection data Connected load: 190 kVA Main fuse: approx. 315 A Godpfxewywcie Aftjil Dimensions, weights Required installation space (machine incl. peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Color Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with band filter system - 50-slot chain tool changer - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra charge: - Renishaw RMP60 wireless probe - BLUM Control NT Machine condition Fully functional, in very good condition and still under power for inspection on site! Images are example photos from a new machine of this type. Original images will follow shortly!

Stav: veľmi dobrý (použitý), Perfektne zachovalý šesťvretenový automatický sústruh INDEX MS 25 so šiestimi priečnymi a šiestimi pozdĺžnymi vedenými nástrojmi. Cena je dohodou v závislosti od zvoleného voliteľného príslušenstva: upínacie púzdra, nástroje, dopravník triesok a pod. Gsdpfsqhkukex Afteil Stroj je stále v prevádzke. Obhliadka je možná po dohode.

Rok výroby: 2022, Stav: ako nová (výstavný stroj), Manipulator with hydraulic height adjustment, faceplate with clamping slots, and handheld remote control. Height (faceplate horizontal): approx. 532 – 1,132 mm Stroke/stroke time (hydraulic): approx. s = 600 mm, t = 20 s Faceplate swivel range: approx. ±300° Height (faceplate axis vertical): approx. 709 mm Faceplate dimensions: Ø1,200 mm x 40 mm, 6 clamping slots Gijdpfefw Ah Rsx Aftjl Main axis speed: approx. 2.0 rpm (other speeds possible) Main rotation axis torque: approx. 7,500 Nm Faceplate speed: approx. 2.5 rpm Faceplate torque: approx. 1,500 Nm