Spracovanie plastov

Plastmachines - BKG Nordson PME 100.35

Stav: dielensky repasované (použité), Stock no. 2587k 1 used pelletizing line, function-tested, Throughput up to approx. 600 kg/h depending on material, consisting of: 1 volumetric dosing unit Plastmachines extruder type PME 100 Single-screw Ø 100 mm – 35 L/D Drive 134 kW – DC 1x degassing zone Melt filter BKG type K-SWE 121 RS – backflushing incl. Hydraulics 3 kW Strand die with 20 x Ø 3.5 mm holes Strand cooling trough 400 x 4000 mm with strand guide rollers Strand suction unit Strand pelletizer SG 3000 ResoTec control / switch cabinet Inspection by appointment – short notice possible Further pelletizing lines / extruders available and ready for demonstration from our Wuppertal site Lodpfxoh Eydbe Afzoai

Rok výroby: 2015, Stav: veľmi dobrý (použitý), Typ: DUAL-PACK 12 Sériové číslo: 152656 P12 Rok výroby: 2015 Kapacita: 500 kg/24h Chladivo: R404a Kompresor: Copeland Emerson ZB15KCE-PFJ-551 Ljdpfxsqvnpas Afzoai Generátor: Geneglace F15 Príkon: 230VAC, 1-fáza, 50Hz Rozmery: 800 x 700 x 700 mm

Stav: dielensky repasované (použité), Funkcionalita: plne funkčný, Stock no. 2587k 1 used pelletizing line, function-tested, Throughput up to approx. 600 kg/h depending on material, consisting of: 1 volumetric dosing unit Plastmachines extruder type PME 100 Single-screw Ø 100 mm – 35 L/D Drive 134 kW – DC 1x degassing zone Melt filter BKG type K-SWE 121 RS – backflushing incl. Hydraulics 3 kW Strand die with 20 x Ø 3.5 mm holes Strand cooling trough 400 x 4000 mm with strand guide rollers Strand suction unit Strand pelletizer SG 3000 ResoTec control / switch cabinet Inspection by appointment – short notice possible Laedpfx Ajtvfhcefzei Further pelletizing lines / extruders available and ready for demonstration from our Wuppertal site

Stav: dielensky repasované (použité), No. 2587k 1 used pelletizing line, function-tested. Throughput up to approx. 600 kg/h depending on material, consisting of: Laodegbdrqjpfx Afzji - 1 volumetric dosing unit - Plastmachines extruder type PME 100, single screw, Ø 100 mm – 35 L/D - Drive: 134 kW – DC motor - 1x degassing zone - Melt filter BKG type K-SWE 121 RS – backflush type, incl. - 3 kW hydraulic unit - Strand die head with 20 holes, Ø 3.5 mm - Strand water bath 400 x 4000 mm with strand guide rollers - Strand suction unit - Strand pelletizer SG 3000 - ResoTec control system / control cabinet Inspection possible on short notice by appointment. Further pelletizing lines / extruders are available and ready for demonstration at our Wuppertal facility.

Rok výroby: 2025, Stav: nový, Granulator MVZ 7.5 kW Demonstration unit available at special price Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic parts or for secondary size reduction of wood chips. Further details can be discussed after testing with your material. Our granulators are used for shredding a wide range of materials such as plastics or wood. Shredders and granulators are ideal for a variety of size reduction applications. For example, injection moulding machines generate reject parts and sprues that need to be recycled. In blow moulding, in addition to reject parts, there are also flash waste or start-up purges. Suitable for processing blow-moulding plastics such as PET bottles, PE/PP bottles, canisters or buckets, and pipes. Material is fed from above into the grinding chamber via a hopper. The rotor inside is equipped with cutting knives. Material is reduced in size between the rotating knives and the stationary knives in the grinding chamber housing until it falls as defined regrind through a screen located beneath the rotor. *Option: The granulate is usually pneumatically conveyed to big bags, silos, or other containers. The price applies only to the granulation system as shown in image 1. - Fan, cyclone, and filters are optional extras. --- Technical Data: Lasdpfsd N Dn Dex Afzsi Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger units available on request (4 to 75 kW) Throughput up to 120 kg/h when shredding plastics *highly dependent on screen and material Application example: Granulation of PE 1000 plastic Initial material: approx. 40 mm chip length Secondary size reduction down to approx. 6 mm Throughput up to 50 kg/h using a 6 mm screen (Throughput up to 80 kg/h using an 8 mm screen) In G 30 wood chip secondary size reduction, significantly higher throughput rates can be achieved. Up to a maximum of 400 kg/h with a 10 mm screen. *with metered infeed, e.g. by conveyor or auger screw Details after test run with approx. 30 kg. Rotor diameter: 180 mm 6 rotor knives, each 225 mm long 4 stator knives, each 225 mm long Dimensions: 930 x 730 x 1420 mm Weight: 450 kg Extraction nozzle: 100 mm Screens: 6, 8, and 15 mm – other sizes available on request Price per screen: €390 Replacement knife set: €679 Suitable for, for example: - Plastic waste of all kinds Various materials – HDPE, LDPE, PP, PS. PC, PA - Biomass - Wood - Herbs etc. Parts from injection moulding, blow moulding, injection moulding scrap, small bottles, cables, small pipes, profiles, etc. --- Larger systems are also available as options: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *depending on screen and material Opening: 620 x 400 mm Special net price: from €24,995 net *Optionally available with matching extraction/transport system Granulator MVZ / 30 kW Throughput up to 400 kg/h *depending on screen and material Opening: 620 x 500 mm Special net price: from €29,795 net *Optionally available with matching extraction/transport system --- For the correct configuration of the machine, the following information is important: - Length x width x height of the input material? - Screen size, to how many mm should the material be reduced? - Required hourly throughput in kg? - Wall thickness in mm? - Material description Photos can also be helpful.

Stav: dielensky repasované (použité), No. 2587k 1 used pelletizing line, function tested, Throughput up to approx. 600 kg/h depending on material, consisting of: 1 volumetric dosing unit Extruder Plastmachines Type PME 100, single screw Ø 100 mm – 35 L/D Drive 134 kW – DC 1x degassing zone Melt filter BKG Type K-SWE 121 RS – backflush system incl. Hydraulics 3 kW Strand die plate with 20 x Ø 3.5 mm holes Strand cooling trough 400 x 4000 mm with strand guide rollers Strand suction unit Strand pelletizer SG 300 Lasdpfx Ajh Eydmefzji ResoTec control / electrical cabinet Inspection by appointment – short notice possible Further pelletizing lines / extruders available from our Wuppertal facility & ready for demonstration

Stav: použitý, X-travel: 600 mm y-travel: fixed mm z-travel: 650 mm Machine weight approx.: total 0.124 t Space requirement approx.: 0.7 x 1.0 x 1.05 m Lasdpfx Aecxxrgjfzoi Surface measuring, testing, and evaluation device for roughness and waviness parameters, with measuring stand and feed unit, including recording device with profile memory and fully digital measurement data processing, fully programmable. Evaluation according to various evaluation programs with just one measurement cycle; reference plane measurement for poorly aligned curved and inclined surfaces; automatic correction for height offset and inclination. Measurement programs are permanently stored and quickly accessible; user-friendly controls. Universally adaptable thanks to pluggable program modules for special functions. Measuring stand PST-Se: large base plate made of black granite with one 14 mm T-slot, table 650 x 450 mm. Feed unit PRK: adaptable precision long-range pickup device for roughness, waviness, and form measurement; traverse distance 1.5 - 60 mm; guiding accuracy 2 µm; traversing speed 0.5 and 0.1 mm/s, automatically adjustable; return speed 1.5 m/s; standard, interval, and end-contact operation. Comprehensive accessories: interchangeable styli, stylus height adjustments, stylus holders, styli, etc.

Stav: veľmi dobrý (použitý), Rok výroby: 2013, Commissioning: 2013 Control: Heidenhain iTNC 530 incl. HR 520 handwheel Machine Hours Power-on hours: approx. 40,700 h Spindle hours: approx. 17,100 h Spindle hours (current milling spindle): approx. 150 h Axes X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping Table Clamping surface: approx. 2,500 x 3,250 x 400 mm 2-Axis Milling Head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear Axis Drives Feed rate X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Due to insufficient available power supply on site, the machine is currently set to the following basic values: Feed rate X/Y-axis: up to 40 m/min Feed rate Z-axis: up to 30 m/min Axis acceleration X/Y/Z-axis: up to 2.5 m/s² Lajdpfx Aowa T Hksfzsi Connection Data Connected load: 190 kVA Main fuse: approx. 315 A The machine can be reset to the original values at any time if sufficient power supply is available. The following reduced connection values apply: Connected load: 130 kVA Main fuse: approx. 250 A Dimensions and Weights Space requirement incl. peripherals: approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, gantry, switch cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment: - Coolant supply with belt filter system - 50-position chain tool changer - Work area cover - Chip conveyor - LTA emulsion mist extraction unit Optional at extra cost: - Renishaw RMP60 wireless probe - BLUM Control NT Condition of the Machine Fully functional, very good condition. Already dismantled and in storage.

Rok výroby: 2004, Stav: použitý, - Manufacturer: Pieralisi - Model: FPC 12 CH01 - Year of manufacture: 2004 - Drum volume: 13 L - Drum diameter: 396 mm - Maximum speed: 6,450 rpm - Drive power: 15 kW - Fields of application: Chemical, pharmaceutical, and food industries Lsdpjp Dumdefx Afzoai - Complete control system & comprehensive documentation available

Rok výroby: 2000, Stav: pripravené na použitie (použité), JEDNOSKRUTKOVÝ EXTRUDÉR GRAEWE-FANGLI 60X33 Použitie: PE-RÚRY alebo PP-RÚRY Typ: 60 X 33 Rok výroby: 2000 Priemer skrutky: 60 mm Pohon: 75 kW Výkon pri spracovaní PE: cca 200 – 250 kg/h Stav: Dobrý, pripravený na prevádzku Extrudér je mojím vlastníctvom. Laodjifgwhjpfx Afzoi Sachal Extrusionmachines Bahnhofstrasse 6 D-26345 Bockhorn/Grabstede Nemecko