Stroje na výstavbu ciest

Polygonmach Bitumen Emulsion Plant

Stav: nový, Curb weight: 16,000 kg Fully Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3 / hour) – 1 unit 2. FOAM TANK (5 m3) – 1 unit 3. BITUMEN FEED PUMP – 1 unit 4. FOAM LYE SYSTEM – 1 unit 5. PIPE NETWORK AND EQUIPMENT – 1 unit 6. CONTROL PANEL – 1 unit 7. CHASSIS – 1 unit FOAM TANK (1 unit) Frame: - Box profile - Capacity: 5 m3 Fsdew Hzcaopfx Aguogh - The tank body is made of 3 mm stainless steel sheet AISI 304 - Welds are made by suitable stainless steel TIG welding b) Heating - 2-inch stainless steel pipe - Oil inlet and outlet pipes are 1 inch DN50, PN16, DIN 2633 - Leak test is carried out at a pressure of 6 bar. c) Mixing System - 3 kW, 60 rpm agitator motor - Drive is equipped with sprockets - Leak tightness is ensured in the shaft seals - Bearings are SKF or FAG - Fixed blades on the outer walls are mounted for increased dispersion and to provide a homogeneous structure d) Temperature indicators are both digital and analog, with two outputs provided. - The capacity of the bitumen pump is max. 8 m3/h. Bitumen pumps are coupled with 7.5 kW 400 rpm gear motors. - The bitumen meter is a system with a capacity of 10 m3/h. a) Pipes - Steel pipes according to DIN 171175 (DN200, DN150, DN100, DN80, DN65, DN25). - The mill line is constructed with 1.5-inch inner pipe and 2-inch outer jacket pipe. - Jacketed pipes are welded according to TSE standards. - Bypass pipes are manufactured as 0.5-inch at suitable locations. b) Compensators - DN 50, DN 80, PN 16, 200°C. c) 3-way and 2-way heated valves - In compliance with TSE standards. - Designed for operating conditions under high pressure (16 bar) and temperature (230°C). d) Hot oil valves - Hot oil valve by KLINGER or THERMO brands. Heat resistant. - To be DN 25 PN16, DN65 PN16, DN50 PN16. e) Filter - Made with 3 mm wire inner container. Designed for frequent and easy cleaning. The control panel is assembled to comply with IC standards.