Lis na balíky

Presona LP 85 VH2

Stav: použitý, Rok výroby: 2014, lisovacia sila: 122 t, celková hmotnosť: 40 000 kg, tlak: 315 lišta, Stroja bola používaná našou firmou, je však teraz nadbytočná a z tohto dôvodu je na predaj! Ffedpfowa N U Dox Agqow

Stav: veľmi dobrý (použitý), Rok výroby: 2014, prevádzkové hodiny: 37 656 h, Funkcionalita: plne funkčný, lisovacia sila: 85 t, šírka plniaceho otvoru: 1 500 mm, dĺžka plniaceho otvoru: 1 100 mm, šírka balíka: 1 100 mm, výška balíka: 750 mm, hmotnosť balíka: 650 kg, celková hmotnosť: 25 000 kg, kapacita olejovej nádrže: 1 000 l, rok poslednej generálnej opravy: 2024, objemový prietok: 410 m³/h, prepravná šírka: 2 400 mm, transportná dĺžka: 9 300 mm, Good day, We hereby offer you, without obligation, a used baler from the manufacturer Presona AB, model LP 85 VH1. Fodpfx Agov T I Evoqsfw The following technical data have been taken from the manufacturer’s operating manual and brochures. We do not assume any liability for the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Model: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific compaction force: 100 N/cm² Pre-press flap force: 28 t Feed hopper dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Binding: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Machine weight (press): approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and plastics such as bottles, buckets, canisters, and drums. The baler is in good condition. Many wear parts and complete assemblies have already been renewed over the last three years. The machine has been serviced regularly. We would be pleased if this baler is of interest to you. Your Mertens & Frowein GmbH Service Team

Stav: nový, Rok výroby: 2025, Funkcionalita: plne funkčný, číslo stroja/vozidla: AR5xxxx, lisovacia sila: 28 t, celková šírka: 2 015 mm, celková dĺžka: 4 400 mm, celková výška: 2 500 mm, celková hmotnosť: 3 000 kg, dĺžka plniaceho otvoru: 1 360 mm, šírka plniaceho otvoru: 1 660 mm, výkon: 5,5 kW (7,48 k), nový hydraulický lisovací kontajner s ochranou proti vytekaniu, vhodný na lisovanie zvyškového odpadu s obsahom vlhkosti Fjdpfx Asydlfxogqsfw

Stav: dielensky repasované (použité), Rok výroby: 2009, prevádzkové hodiny: 22 029 h, Funkcionalita: plne funkčný, lisovacia sila: 80 t, šírka plniaceho otvoru: 1 000 mm, dĺžka plniaceho otvoru: 1 400 mm, šírka balíka: 1 100 mm, výška balíka: 750 mm, hmotnosť balíka: 600 kg, celková hmotnosť: 16 000 kg, výkon: 45 kW (61,18 k), rok poslednej generálnej opravy: 2025, Technical data baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours, as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed opening dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Ffodpfx Agex A U Nceqsw Bale dimensions: 1,100 x 750 mm (W x H), length adjustable Drive power: 45 kW Total connected load: 75 kW Binding: 4-fold vertical, fully automatic Throughput capacities at a bulk density of: - 30 kg/m³: approx. 6.0 t/hour - 50 kg/m³: approx. 10.5 t/hour - 100 kg/m³: approx. 17.5 t/hour Bale weights (bale length approx. 1.2 m): up to 600 kg, depending on material PLC control: Siemens S7-300 Display panel: pulsotronic Installed press dimensions: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight (baler): 16 t Special equipment: - Wear-resistant floor made of HARDOX steel - Special press ram for compacting "difficult" materials and loose bulk materials of small particle size - Control cabinet air conditioning - Machine base elevation 200 mm Remarks: The machine was serviced and partially overhauled in our workshop. The following tasks were performed and parts replaced: • Disassembly of the press ram, breakdown into individual parts, overhaul of the mechanism, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Central plastic main wear plate (support plate) under the press ram • Steel guide rails left/right at the top of the frame replaced • Complete base plate replaced (in four sections), made of wear-resistant HARDOX steel • Wire feed rails in the press base newly welded and smoothed • Counter knife assembly (two-part) in the frame replaced • Knife gap adjusted to approx. 2.5 mm • Disassembly of the tying and twisting unit, breakdown into individual parts, overhaul of the mechanism, replacement of all groove ball bearings and axial ball bearings of the twisting shafts, wire cutters cleaned and re-aligned, chains lubricated and tensioned • Carrier roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, chemically analyzed, in good condition and therefore has not been replaced and can continue to be used • General maintenance performed Afterwards, the baler was subjected to a machine test in manual and automatic mode (see video of machine function test).

Stav: dobrý (použitý), Rok výroby: 2011, prevádzkové hodiny: 40 000 h, Funkcionalita: plne funkčný, lisovacia sila: 88 t, šírka plniaceho otvoru: 990 mm, dĺžka plniaceho otvoru: 1 800 mm, dĺžka balíka: 1 200 mm, šírka balíka: 1 100 mm, výška balíka: 750 mm, celková hmotnosť: 23 000 kg, kapacita olejovej nádrže: 2 000 l, výkon: 90 kW (122,37 k), objemový prietok: 643 m³/h, Good day, We hereby offer you, without obligation, a used baler including conveyor belt, wire feed stations, and bale slide from the manufacturer HSM GmbH + Co. KG, type VK 8818 FU. The following technical data has been taken from the manufacturer's operating manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours, as of July 2025 Main press force: 880 kN Specific pressing force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput capacity: 643 m³/hour Bale dimensions: 1,100 x 750 mm; length variable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Tying: 5-fold horizontal, fully automatic Baler dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation footprint with conveying system: 14,000 x 23,000 x 7,745 mm (L x W x H) Ffjdpfx Ageymmtcoqow Note: The machine was used in a recycling operation to compact paper, cardboard, and films. The baler is in good condition and will be replaced with a new, larger baler in May/June 2026. Until then, the machine can be inspected in operation with material feed. We would be pleased if this baler is of interest to you. Your Service Team, Mertens & Frowein GmbH

Stav: dobrý (použitý), Rok výroby: 2016, prevádzkové hodiny: 47 624 h, Just arrived, more photos and a video to follow Baler Avermann, type AVOS 1410 BR5 – 45/80, pressing force 80 t, year of manufacture 2016 Technical data: Manufacturer: Avermann Maschinenfabrik Type: AVOS 1410 BR5 – 45/80 Year of manufacture: 2016 Pressing force: 80 t Drive power: 45 kW Feed opening: 1,400 x 1,000 mm Throughput at 35 kg/m³: 6.0 t/h Throughput at 60 kg/m³: 10.5 t/h Throughput at 100 kg/m³: 17.5 t/h Bale dimensions: 1,100 x 750 mm (W x H), variable length Bale weight: up to 600 kg, depending on material Tying: 5-fold vertical, automatic Machine dimensions: approx. 10,850 x 2,400 x 3,800 mm (LxWxH) Machine weight: approx. 18,000 kg Ffsdpfxox Uzy Uo Agqew Note: The baler was dismantled from ongoing operation. A matching WESTERIA conveyor belt is available as an option. The main cylinder was renewed in November 2025. Further photos available upon request. Please feel free to contact us. Please note: All technical data is based on the manufacturer's information. We do not assume any liability for the details provided or for any errors. This offer is subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by appointment. Sale is ex-works, against prepayment, without warranty or guarantee.