Laserový rezací stroj
Prima Power CV 5000

Name: Prima Power CV 5000
Brand: Prima Power
Availability: InStock

Rok výroby

2016

Stav

Použitý

Umiestnenie

Dieburg

Laserový rezací stroj Prima Power CV 5000

Zobraziť mapu

Údaje o stroji

Označenie stroja:: Laserový rezací stroj

Výrobca:: Prima Power

Model:: CV 5000

Rok výroby:: 2016

Stav:: veľmi dobrý (použitý)

Funkčnosť:: plne funkčný

Cena a lokalita

Umiestnenie:: 64 Dieburg, Deutschland

Zavolať

Podrobnosti ponuky

ID inzerátu:: A21580223

Aktualizácia:: naposledy dňa 24.03.2026

Popis

Laser Machine
Prima Power CV 5000
Year of Manufacture: 2016

3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000)

Average Power Output:
200 W – 5000 W

Peak Power Output:
Up to 6 kW

Wavelength:
10.6 microns

Beam Quality Factor (M²):
< 2.4 (typically 2.1 to 2.3)

Beam Divergence:
1.5 mrad (half angle)

Beam Diameter at Output:
15 mm 1/e², 21 mm full beam

Pulsed Operation – Pulse Repetition Rate:
0 – 2 kHz

Pulse Width:
250 microseconds, 70 µs resolution

Alignment Stability:
+/- 150 µrad

Operating Conditions:
• Ambient temperature (max): 40°C
• Ambient temperature (min): 10°C
• Relative humidity: < 95% (non-condensing)

Diode Laser:
• Wavelength: 635 nm
• Output power: < 1 mW

—

3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000)

Electrical:
• Power: 37 kW
• Voltage: 400 VAC – 460 VAC ±10%, 3-phase

Cooling:
Lsdpeywwq Uofx Ab Eshd
• Required cooling capacity: 45 kW
• Flow rate: 133 L/min (35 GPM)
• Inlet temperature: 18 – 20°C
• Maximum inlet pressure: 6 bar
• Nominal inlet pressure: 3 bar
• Differential pressure: 1.5 bar
• Coolant: Distilled water with 35% Dowfrost HD
• Filter requirement: 100 micron

Gases:
• Type / Purity / Gas mixture / Consumption:
• He: 99.996% | 67.7% | 13.4 – 46.8 SLPH
• CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH
• N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH
• Total consumption: 20 – 70 SLPH (variable)

Additional Requirements:
• < 10 ppm water vapor, hydrocarbons, and oxygen
• Air: dry – dew point < 2°C
• Depending on shutter usage

Inzerát bol automaticky preložený. Chyby v preklade sú možné.

Poskytovateľ

Registrovaný od: 2010

85 Inzeráty online

Zavolať

Odoslať dopyt

Telefón & Fax

+49 6074 ... inzercie

+49 6071 ... inzercie

Fax:

Tieto inzeráty by vás mohli tiež zaujímať.

Malý inzerát

Dieburg

799 km

Laserový rezací stroj
Prima PowerCV 5000

Zavolať

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Rok výroby: 2016, Laser Machine Prima Power CV 5000 Year of manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average power output: 200 W – 5000 W Peak power: Up to 6 kW Wavelength: 10.6 micrometers Beam quality factor (M²): < 2.4 (typically 2.1 to 2.3) Beam divergence: 1.5 mrad (half-angle) Beam diameter at output: 15 mm 1/e², 21 mm full beam Pulsed mode – Pulse repetition rate: 0 – 2 kHz Lsdpfx Ajywwrfeb Eehd Pulse duration: 250 microseconds, 70 µs resolution Alignment stability: +/- 150 µrad Operating conditions: • Max. ambient temperature: 40 °C • Min. ambient temperature: 10 °C • Relative humidity: < 95 % (non-condensing) Diode laser: • Wavelength: 635 nm • Output power: < 1 mW ——— 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power consumption: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20 °C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas blend / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total consumption: 20 – 70 SLPH (variable) Other requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2 °C • Dependent on shutter operating cycles

Zobraziť podrobnosti

Inzerujte tu