5-osové simultánne obrábacie centrum

Röders RXU 1001 DSH

Stav: pripravené na použitie (použité), Rok výroby: 2016, celková výška: 3 600 mm, celková hmotnosť: 21 500 kg, maximálna rýchlosť vretena: 24 000 ot./min, maximálna dĺžka produktu: 4 814 mm, počet osí: 5, This 5-axis RÖDERS RXU 1001 DSH was manufactured in 2016. It offers a working area of 800 mm × 855 mm × 500 mm and a maximum workpiece weight of 800 kg. The machine is equipped with a milling spindle operating at 24,000 rpm and features a tool changer for 24 tools. If you are seeking high-quality machining capabilities, you should consider the RÖDERS RXU 1001 DSH vertical machining center we are offering for sale. Contact us for further details. • Working area: 800 mm × 855 mm × 500 mm Nodpeymnvfefx Aarola • Swivel range (A-axis): ±115° • Rotary range (C-axis): virtually unlimited • Table size: 400 mm round or 400 mm square, 600 mm round with two flat sides • Max. workpiece weight: 800 kg • Feed rate: 0-60,000 mm/min • Milling spindle (standard): 67 Nm (S1), HSK A63, max. tool diameter 35 mm • Tool changer (standard): 24 tools (rotary - can be loaded during machining) • Tool changer (optional, integrated): 40+ tools (chain-type - can be loaded during machining) • Integrated measuring laser • Chip disposal (standard): 2 augers in a chip container at the rear of the machine Additional equipment • Optional chip conveyor

Stav: použitý, Rok výroby: 2009, Posuv v osi X: 600 mm Posuv v osi Y: 450 mm Posuv v osi Z: 450 mm Ovládanie HEIDENHAIN - TNC 530 Otáčky vretena 18 000 ot./min Upínanie nástrojov HSK-A63 Počet pozícií v meničovi nástrojov: 120 5-osé simultánne obrábacie centrum | HERMLE - C 20 U s vnútorným chladením (80 bar), NC výklopno-otočným stolom, meničom 120 nástrojov a meničom paliet. Stroj je vo veľmi dobrom stave a je možné ho kedykoľvek vidieť v prevádzke pod prúdom v závode vo Švajčiarsku. Videá stroja zo závodu radi poskytneme na požiadanie. Ďalšie technické údaje a informácie o vybavení nájdete v ponuke. Nljdpoyy A N Ujfx Aaroa - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tagy: C 20 | C20 | C-20 | C20U

Rok výroby: 1998, stav: takmer ako nový (použitý), Laserový typ: Pevný laser s pulzním Q-spínáním Laserové médium: Nd:YAG Vlnová délka: 1064 nm Průměr paprsku: cca 1,2–1,3 mm za výstupním zrcadlem při TEM00 Divergence paprsku: 5 mrad v režimu multimode, 2 mrad v režimu TEM00 Délka pulzu (čas): CW / 90 ns Max. výstupní výkon: 65 W (volitelně 130 W) v multimode, 16 W v monomode Nedpfxsd Dhw Nj Aarela Pulzní energie: 16 mJ (30 mJ volitelně) při 3 kHz Provozní režimy: CW, Q-spínání v rozsahu 0,1 až 100 kHz Systém odklonu paprsku: Galvanometrický systém Šířka čáry v režimu smíšeného módu: cca 0,12 mm

Stav: takmer ako nový (použitý), Rok výroby: 2024, prevádzkové hodiny: 100 h, pojazdová vzdialenosť osi X: 660 mm, zdvih osi Y: 406 mm, zdvih osi Z: 508 mm, 3-osé CNC obrábacie centrum HURCO typ VM10-24i PLUS CTS Rok výroby: júl 2024 – AKO NOVÝ – menej než 100 pracovných hodín Pojazdy X: 660 mm / Y: 406 mm / Z: 508 mm Riadiaci systém WinMax 5: dvojitý dotykový displej 19'', odpojiteľný elektronický ručný ovládač, USB porty Vreteno: SA40, chladenie tepelnou kvapalinou Otáčky vretena: 12 000 ot./min. Integrované chladenie nástroja (CTS) Rozmer stola: 762 x 406 mm – 3 T-drážky 18H7 – Nosnosť: 1500 kg Menic nástrojov: 24 pozícií, automatická elektrická výmena pomocou ramena Motor vretena: 11,2 kW pri 1450 ot./min. Max. krútiaci moment: 73,6 Nm Rýchloposuvy: 28 m/min. na osiach X, Y a Z Štandardné funkcie: Ultimotion, pevné závitovanie, špirálová interpolácia, trochoidné obrábanie, import STL, programovanie WinMax, Fanuc ISO + konverzačné programovanie Inštalované softvérové možnosti: Nsdpfx Asyh Nz Asarsla Ultimonitor ESF (Ethernet supervízia) Knižnica materiálov a nástrojov Prehrávač súborov DXF 2D/3D, SPLINE a STEP

Stav: pripravené na použitie (použité), Rok výroby: 1995, prevádzkové hodiny: 41 000 h, Funkcionalita: plne funkčný, FOR SALE: BRUDERER BSTA 50USL High-Performance Stamping Press With automatic feeder BBV 190 500 kN | 100–1,120 strokes/min | Fully automatic | Swiss premium quality Technical Highlights: Rated force: 500 kN Stroke rate: 100–1,120 strokes per minute Operating hours: 41,000 h Main drive: 22 kW Control voltage: 24V DC Power supply: 400V / 50Hz / 62 kVA Adjustable stroke: 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram height adjustment: 64 mm Working Areas: Max. Tool installation width: 1,100 mm Strip feed width: up to 256 mm Ram area: 980 × 420 mm Table area: 1,080 × 650 mm Adjustable strip infeed height: 60–140 mm Max. Strip width: 120 mm Max. Feed length: 85 mm Nodpfx Aaswpg Rbsrola Max. Material thickness: 4 mm Feed angle: 180° Machine dimensions (incl. BBV 190): Setup dimensions (L × W × H): 2,407 × 1,278 × 3,150 mm Weight (approx.): 8,000 kg Features: BBV 190 feeding system – fully synchronized mechanical strip feeding system Integrated control cabinet Pneumatic clutch and brake Adjustable stroke and ram height Compressed air connection: 6–10 bar Oil cooling unit included Ready for integration into peripheral systems Condition & Delivery: Machine in excellent technical and optical condition Fully serviced and inspected Immediately available from Europe Worldwide shipping and installation support available Contact us today for pricing and more technical details. We are happy to help you modernize your production line with Swiss precision.

Stav: použitý, Rok výroby: 1999, x-travel: 12,000 mm y-travel: 3,600 mm z-travel: 1,500 mm Spindle speeds: 3,000 rpm Control: Heidenhain iTNC430 Milling head: 2 axes, indexed 2.5° Vertical (Y-axis): 3,600 mm Cross (Z-axis): 1,500 mm Longitudinal (X-axis): 12,000 mm Guideway length: 14,700 mm Guideway width: 1,400 mm Lowest spindle nose milling position measured from the floor (head horizontal): 855 mm Low column version 870x900x2,625 mm: 3,000 kg High column version 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Taper: ISO 50 / DIN 69871-A Speeds: 11.7; 231; 3,000 rpm Feed range: 2–2,500 mm/min Rapid traverse X-axis: 12,000 mm/min Nledpjxwdygefx Aarsa Z/Y-axis: 15,000 mm/min Feed motor power X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Air supply for the machine: 300 L/min at 4.5 bar NOTE: Clamping plates and chip conveyors are not included in the scope of delivery. However, we can offer both used and new clamping plates and chip conveyors upon request.

Stav: použitý, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT40 BIG PLUS - Spindle drive power: 26 kW - Spindle speed: 15,000 rpm LINEAR AXES - Travel X/Y/Z axes: 560/640/640 mm - Rapid traverse speed (X/Y/Z): 60 m/min SWIVEL AXIS B - Travel range: 360° - Minimum resolution: 0.001° TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 60 PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 400x400 mm - Number of pallets: 2 - Maximum pallet load: 400 kg - Max. workpiece diameter: 630 mm - Max. workpiece height: 900 mm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 4100x2300 mm - Machine height: 2720 mm - Machine weight: 11,000 kg Nodpsuhbv Sofx Aarjla MACHINE OPERATING HOURS - Operating hours: 3,700 h EQUIPMENT - Control: Fanuc 31 iB - Interface: Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Direct path measuring systems - Synchronized tapping - 3-color status lamp - Coolant tank * with high-pressure pump: 25 bar * Internal coolant supply (IKZ) * with enclosure washing - Chip conveyor: Rear - Spindle cooling - Tool measuring probe - Workpiece measuring probe: Renishaw OMP60

Stav: generálne opravený (použitý), Funkcionalita: plne funkčný, pojazdová vzdialenosť osi X: 475 mm, zdvih osi Y: 600 mm, zdvih osi Z: 400 mm, hmotnosť obrobku (max.): 200 kg, otáčky (max.): 42 000 ot./min, priemer stola: 450 mm, 5-Axis Röders Tec RXP800DS - Fully Refurbished - The machine is completely overhauled, inspected, and measured at our facility. As a result, it meets new machine tolerances! Working Area: - X-axis: 475 mm Nledpfxevvlmce Aarja - Y-axis: 600 mm - Z-axis: 400 mm - Clearance Height: 500 mm Tool Changer: 52 stations Spindle: HSK40E, max. 42,000 rpm Tool Measurement Laser for tool presetting Handheld Remote Unit Minimum Quantity Lubrication Prepared for Extraction System (e.g., for graphite machining) Spindle Compensation Precision Package Control: Röders RMS6 (latest version) The machine can be inspected while operational at any time. You are also welcome to learn more about our range and scope of refurbished machines on our website or on the Hüttmann YouTube channel.

Stav: použitý, Rok výroby: 2007, Working width 1,380 mm Workpiece height 70 mm Total power requirement 45 kW Machine weight approx. 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding unit Type EM 5 N/II/L + 2 B/1400 Year of manufacture 2007 Serial No. 780063 _____ Grinding width approx. 1,380 mm Roller width 1,400 mm Max. workpiece height 1 - 70 mm Infinitely variable feed speed approx. 1.5 - 8 m/min Consisting of 5 working elements: Oscillating grinding roller for use with abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flaps or non-woven abrasive flaps, can be adjusted for wear. Brush roller unit for mounting 2 rollers with Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via hand wheel, also ideal for removal of oxide layers. Wet grinding unit with belt filter system and closed water circuit, mounted underneath the conveyor belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length 80 mm, water and air volume adjustable, etc. Workpiece transport is front-side via continuous conveyor belt (min. part length 350 mm) with a vacuum suction unit over a width of 300 mm on the right, as well as a magnetic track with a width of 300 mm to hold small parts up to at least 80 mm long. Frequency inverter for stepless speed control of the abrasive flap brushes from 250 - 1,000 RPM, position 2 top, as well as for the belt feed. Control panel with user-friendly interface and digital display of roller adjustment, 4 ammeters to monitor the roller drives, indicator LEDs. Quick-change system for lateral removal of abrasive flap brushes and various spare rollers with non-woven and brush filling. Total drive approx. 45 kW - 400 V - 50 Hz Weight approx. 5,500 kg Condition : good to very good Njdpot Hw Iiofx Aarsla Delivery : ex stock - as inspected Payment : strictly net - upon receipt of invoice

Stav: generálne opravený (použitý), Rok výroby: 2001, Funkcionalita: plne funkčný, Completely overhauled BRUDERER high-speed stamping press BSTA300 incl. new press control system Technical Specifications: ----- Tonnage: 300 kN Die installation opening: 750 mm Stroke rate: 80–1400 (depending on selected stroke) Adjustable stroke: 13, 16, 19, 25, 32, 38, 44, 47 mm Ram adjustment range: 51 mm Die installation height: 171–239 mm (depending on selected stroke) Bolster plate: 740 x 480 mm Ram surface: 630 x 360 mm Strip pass-through width: 206 mm Nedpfx Aetvnlbsarsla Base plate opening: 710 x 160 mm Strip entry height: 50–120 mm Strip travel direction: left to right Feed: servo feed Machine weight: approx. 5,150 kg Machine colour: RAL 1013 pearl white Fitted parts colour: RAL 7016 anthracite Control cabinet colour: RAL 7035 light grey