Uholník na okenné rámy Saomad

SAOMAD Operator 5

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Pokosová píla, otočná +/-45°, model OMGA T 50 350 so systémom odsávania prachu Použitý stroj pracovný stav: Výborný CE certifikácia: Áno komplet so systémom odsávania prachu s rozšírením plochej plochy Technické údaje: Ijdpfx Acom Ak Elj Near Napätie: 380/50 Výkon motora: 3 HP (2,2 kW) Priemer kotúča: 350 mm S čepeľou 90°: max. výška rezu: 110 mm max. šírka rezu: 130 mm S kotúčom 45°: max. výška rezu: 110 mm max. šírka rezu: 92 mm Hmotnosť stroja: 90 kg Hmotnosť odsávacej skrine: 50 kg

Stav: použitý, Rok výroby: 2023, DOUBLE GLAZING BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two vertically aligned glazing beads. The right sawing unit is fixed, while the left unit is adjustable; the set cutting length can be read from a digital measurement display. Both units feature supports allowing for the simultaneous cutting of 2 glazing beads. For cutting larger cross-sections, the upper support can be removed. Upon completion of the cutting process, the pneumatic clamping cylinders automatically swivel to the side to facilitate loading and unloading of the machine. STANDARD EQUIPMENT • Fixed right unit • Digital measurement display • Pressure monitor • 2 carbide-tipped saw blades • Electrical system with motor brake, undervoltage release, and motor protection switch • Pressure monitor • Tool kit • Safety devices with horizontal, swiveling clamping devices • Two-hand operation • Belt drive • Pneumatic unit lift • Central support TECHNICAL DATA • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cut height without support: 80 mm • Max. cut width at 90 degrees: 55 mm • Max. cut width at 45 degrees: 40 mm • Max. cutting length: 2800 mm (optionally 4000 mm) • Min. cutting length: 158 mm • Weight: 217 kg • Required space (standard configuration): 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop with 4 positions 1 pc Set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support 1 pc Adjustments for rebated profiles 1 pc Adjustments for rebated profiles according to drawing: - Attachment for clamping devices to compensate for profile inclination - Shims on the rear stops of the units and the central support In the sketch below (in green) a beveled pressure pad is shown, which follows the inclined profile and thereby presses it against the (red-marked) shim on the stop. Location: Garbsen Iedpexnlgcjfx Ac Njar

Rok výroby: 1998, stav: veľmi dobrý (použitý), Predám súpravu na výrobu okien: 1 ks čapovacia a drážkovacia linka Weinig Unitec 10. 1 ks profilovací a falcovací automatické centrum Weinig Univar 10. Iaodpfjfzzhyox Ac Ner Rok výroby 1998. Frézovacie hlavy OERTLI. K dispozícii ihneď. Cena spolu 17.000 eur. Stav veľmi dobrý!

Rok výroby: 2014, stav: použitý, PROLOGIC softvér pre výrobu okien FenOffice 14 Conturex Iodpferci S Sox Ac Nsar

Stav: dobrý (použitý), Kód: 0321 Značka: SCM Model: MULTIFLEX C - CE štandard Automatizované pracovné centrum na výrobu okenných rámov určené na čapovanie, profilovanie a kontúrovanie – max. hrúbka obrobku 140 mm – CE štandard Technické údaje Automatický vozík s prítlačným dorazom Maximálna pracovná dĺžka: 2800 mm Min./max. hrúbka obrobku: 30/140 mm Priemer priebežnej píly na odstrihovanie koncov: 400 mm – motor 4 HP Užitočná dĺžka čapovacieho vretena: 320 mm – motor 10 HP Iaedpfjytn U Iex Ac Nor Priemer vretena: 50 mm Maximálny priemer nástroja: 350 mm Profilovacie vretená: 1. protisplinterové profilovacie vreteno – dĺžka 320 mm – motor 7,5 HP – priemer nástroja 220 mm 2. profilovacie vreteno – dĺžka 320 mm – motor 7,5 HP – priemer nástroja 220 mm Minimálny a maximálny priemer nástrojov profilovacích vretien: 100/220 mm Priemer profilovacích vretien: 50 mm Nástrojová skupina: Zuani Plynulo nastaviteľný posuv Skupina na spätné získavanie zasklievacích líšt – motor 3 HP – priemer odsávacieho hrdla 50 mm Celkové rozmery: 2400 x 3300 x 2000 mm (v x š x h) Hmotnosť: 2200 kg

Rok výroby: 1995, stav: veľmi dobrý (použitý),

Stav: použitý, Rok výroby: 2005, Funkcionalita: plne funkčný, doraz dĺžky: 3 200 mm, priemer nástroja: 400 mm, priemer vretena: 50 mm, zdvih vretena: 640 mm, maximálna rýchlosť vretena: 3 000 ot./min, dĺžka frézovacieho vretena: 320 mm, priemer pílového kotúča: 400 mm, typ nastavenia výšky: elektrický, typ vstupného prúdu: Klimatizácia, pracovná výška: 130 mm, pracovná šírka: 200 mm, SCM Windor 60/100 – Angle Machining Centre Manufacturer: SCM Group Year of manufacture: 2005* 1. General Description of the Plant The production line in question is a window and door manufacturing line, model Windor 60/100, produced by SCM Group in 2005. This is a CNC-controlled angle machining centre for the industrial processing of frame and sash components. The facility is designed for series production and enables precise, repeatable machining through integrated process steps. 2. Main Components of the Plant 2.1 Angle Machining Centre SCM Windor 60/100 The SCM Windor 60/100 is of modular construction and designed as an angle system. Machining is performed on a tenoning side and a profiling side, arranged at right angles to each other. The centre combines multiple operations such as milling, drilling, grooving, rebating, and tenoning into a continuous CNC-controlled process. Key features: * CNC multi-sided machining * Multiple milling and machining spindles * Automated tool guidance and tool change * High dimensional and repeat accuracy 2.2 Fleximat Drilling Centre The Fleximat drilling centre is integrated into the line and serves the precise execution of boreholes for joints and fittings. Machining is CNC-controlled, equipped with both vertical and horizontal drilling units. 2.3 Profiler Centre The profiler centre is designed for profile-forming milling work and comprises two machining sides: Right side: * Lifting spindle with height adjustment * For variable profile and contour machining Left side: * 24-position tool changer * Automatic tool change to minimise set-up times * Suitable for complex profile milling Isdpfxex Nqqxe Ac Noar 2.4 Löwer Surface Sanding Machine A surface sanding machine from the manufacturer Löwer is integrated into the production line. The machine is used exclusively for surface sanding and serves to improve the surface quality of processed components. 3. Control, Operation and Safety The system is equipped with CNC control, which manages all machining operations, tool changes, as well as feed and spindle movements. Operation is conducted semi- or fully-automatically by trained technical personnel. The safety equipment complies with the state of the art at the time of installation (year of manufacture 2005) and specifically includes: * Mechanical safety devices and enclosures * Emergency stop equipment * Safety interlocks on moving machine components 4. Optional Extension: SCM Topset XL Planing Machine (10-spindle) To expand the existing machine park, the installation of a planing machine, type SCM Topset XL with 10 spindles, is planned. The machine will be operated as a standalone machining station at a separate location within the production hall and will not be directly integrated into the Windor plant's CNC control. The equipment is available and can be dismantled at any time. Dismantling and transport are to be organised by the buyer. Available from: 07.01.2026

Stav: použitý, Rok výroby: 2021, Number of spindles: 5 pcs. Working width: 250 mm Planing height: 160 mm Length of surfacing table: 2500 mm Feed motor: 4 kW Feed speed: 6–24 m/min Control system: K2 Basic 7" Touch KUPER SWT XL-5 AUTOMATIC PLANING AND MOULDING MACHINE --- AS NEW, DEMONSTRATION UNIT! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 – 6,000 rpm; spindle 4,500 to 8,000 rpm - Width and height adjustable via motor: left spindle radial upper spindle axial - Feed beam motorised positioning - Additional motorised adjustments: right spindle radial and axial left spindle axial - Working width: 250 mm DETAILED TECHNICAL DATA --- Working width (with tool diameter 125–163 mm): 15 – 230 mm Working height (with tool diameter 125 mm): 10 – 160 mm (tool diameter up to 163 mm): 10 – 160 mm Minimum workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Processing of workpieces depends on the following operating parameters: Material, wood moisture, tools, chip removal diameter and feed speed. If necessary, adjustment of operating parameters is required. SPINDLE CONFIGURATION --- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM --- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency-controlled: 4000–6000 rpm Tool diameter: 125–160 mm Rabbetting device: diameter difference 20–25 mm to planing head Important: Machine cannot be operated without rabbet cutter Extraction port D = 125 mm Tool clamping system: Quick-clamping nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT --- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4000 – 6000 rpm Tool diameter: 112 – 200 mm Axial adjustment 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Extraction port D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: Quick-clamping nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT --- Siemens IE3 motor with inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4000 – 6000 rpm Tool diameter: 112 – 200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Extraction port D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: Quick-clamping nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP --- Siemens IE3 motor with inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4000 – 6000 rpm Tool diameter: 112 – 200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction port D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: Quick-clamping nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM --- Iodjwgwmnjpfx Ac Njar (Specification truncated; provide remaining spindle details as needed)

Stav: veľmi dobrý (použitý), Rok výroby: 1992, Pekný stroj vo veľmi dobrom stave, málo používaný, pochádza z malej firmy. Súčasťou je náradie IV 68. Stroj je stále pripravený na predvedenie v prevádzke. Isdpju S Afcjfx Ac Noar

Stav: použitý, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Used Weinig Unicontrol 6 window manufacturing line ----- For sale on behalf of a customer Manufacturer's description: For the production of single parts, components, and small series. Spindle arrangement: One cross-cut saw, a single-sided tenoning and slotting spindle, a right profiling spindle, a tenoning/slotting spindle, and a profiling spindle suitable for stacking multiple tools, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer into the continuous, chainless rubber roller feed of the profiling unit, manual feed height adjustment. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifier for sash or frame outer dimension. Control of tool positions (longitudinal and cross machining) via selector switch from the operator panel. Technical data ----- Cross-cut saw ----- Number of tools: 1 Spindle speed: 2,800 rpm Spindle diameter: 40 mm Max. tool diameter: 350 mm Motor: 3 kW Tenon and slot spindle ----- Number of tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Iaodpfx Aox Tu N Hoc Nsr Spindle speed 3,500 rpm Spindle diameter 50 mm Tool clamping length 320 mm Max. tool diameter 320 mm Motor 11 kW Profiling spindle ----- Number of tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle speed 6,000 rpm Spindle diameter 50 mm Tool clamping length 320 mm Max. tool diameter 232 mm Motor 11 kW Special equipment: Synchronised spindle ----- Pneumatically actuated forward/backward for splinter-free overlapping machining of window sashes, frames, and doors. Spindle diameter 50 mm, 4 kW Tool clamping length 120 mm, tool minimum diameter 112–140 mm, Max. tool diameter 232 mm, spindle speed 6,000 rpm Motor power upgrade for synchronised spindle from 4 kW to 7.5 kW Screen-based control for 99 window types, 1 type can include up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production options: single parts, double parts, by frame, by series, overlapping machining. Data input via keyboard with integrated operator guide and fault diagnostics. 1 grooving spindle from above ----- Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm, with keyway 10 x 4 mm Mounting length: 13 mm Clamping length: 40 mm Axial stroke: 2 positions Radial stroke: 2 positions Max. tool diameter 130 mm Spindle motor upgrade from 2.2 to 3 kW 1 hardware milling unit, right: ----- For routing hardware grooves in the overlapping machining pass or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch at the control panel. Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool swing diameter: min. 140 mm, max. 180 mm Home position below table level: 10 mm Hardware milling unit in special version: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Radial stroke, 2 positions Motor power upgrade for hardware spindle from 2.2 to 3 kW Hardware spindle for 230 mm tool diameter in and above the table Electrical height adjustment of the feed with selector switch at the control panel for 2 wood dimensions, inclusive...