SCHLATTER LINKA NA ZVÁRANIE SIETÍ MG 24.1/8C

SCHLATTER MESH WELDING LINE MG 24.1/8C

SCHLATTER MG24 Welded Mesh Production Line

Fully Refurbished

WORKING RANGE

Panel width: max. 2500 mm
Cross wire length: min. 900 mm
Cross wire length with QF5 distributor: min. 300 - 1600 mm
Max. spacing between outer longitudinal wires: 2400 mm
Mesh length (length of longitudinal wires): max. 2500 - 6000 mm
Minimum longitudinal wire spacing: 100 mm
Cross wire spacing: 25-250 mm
Adjustable via cutting device (0-1)
Longitudinal wire diameter: 4.0 - 12.0 mm
Cross wire diameter: 4.0 - 12.0 mm
Number of longitudinal wires: max. 24
Predswu Tu Dopfx Aquja

MESH WELDING MACHINE MG 24.1/8C, Basic equipment includes:

- 1 Machine base frame
- 1 Upper beam for press reception, continuously adjustable by hand crank
- 1 Cross wire magnet holders with retaining magnets and cross wire monitoring
- 1 Row of pneumatic solenoid valves for press actuation
- 1 Air and water supply unit
- 2 Pneumatic rotary actuators with oil damping
- Static torque with 5 bar compressed air: 480 Nm
- Front section, continuously adjustable from 25 - 250 mm via cutting device (0-1)
- 1 Traversing carriage with panel lifting device
- 1 Tool set for machine adjustment

WELDING SECTION includes:

8 type C transformers
Rated power per transformer: 100 kVA
Secondary open-circuit voltage: 7.1 V
Rated secondary current: 14 kA
8 ES 130 thyristor contactors
12 welding presses: 5.0 kN
12 longitudinal current bridges for wire spacing: 50-100 mm
12 longitudinal current bridges for staggered wires: 100 mm
10 longitudinal current bridges for wire spacing: 100-150 mm
8 longitudinal current bridges for staggered wires: 150 mm
6 longitudinal current bridges for wire spacing: 150-200 mm
6 longitudinal current bridges for staggered wires: 200 mm
24 lower Cu electrode holders with standard angular electrodes and each with water-cooled power cable, width: 58 mm
24 wire holding clamps

Panel width: max. 2500 mm
Cross wire length: min. 900 mm
Cross wire length with QF5 distributor: min. 300 - 1600 mm
Max. spacing between outer longitudinal wires: 2400 mm
Mesh length (length of longitudinal wires): max. 2500 - 6000 mm
Minimum longitudinal wire spacing: 100 mm
Cross wire spacing: 25-250 mm
Longitudinal wire diameter: 4.0 - 12.0 mm
Cross wire diameter: 4.0 - 12.0 mm
Number of longitudinal wires: max. 24

Inzerát bol automaticky preložený. Chyby v preklade sú možné.