Naklápacia vretenová frézka

SCM GROUP S.p.A. TI 155 EP CLASS

Stav: použitý, Rok výroby: 2023, DOUBLE GLAZING BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two vertically aligned glazing beads. The right sawing unit is fixed, while the left unit is adjustable; the set cutting length can be read from a digital measurement display. Both units feature supports allowing for the simultaneous cutting of 2 glazing beads. For cutting larger cross-sections, the upper support can be removed. Upon completion of the cutting process, the pneumatic clamping cylinders automatically swivel to the side to facilitate loading and unloading of the machine. STANDARD EQUIPMENT • Fixed right unit • Digital measurement display • Pressure monitor • 2 carbide-tipped saw blades • Electrical system with motor brake, undervoltage release, and motor protection switch • Pressure monitor • Tool kit • Safety devices with horizontal, swiveling clamping devices • Two-hand operation • Belt drive • Pneumatic unit lift • Central support TECHNICAL DATA • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cut height without support: 80 mm • Max. cut width at 90 degrees: 55 mm • Max. cut width at 45 degrees: 40 mm • Max. cutting length: 2800 mm (optionally 4000 mm) • Min. cutting length: 158 mm • Weight: 217 kg • Required space (standard configuration): 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop with 4 positions 1 pc Set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support 1 pc Adjustments for rebated profiles 1 pc Adjustments for rebated profiles according to drawing: - Attachment for clamping devices to compensate for profile inclination - Shims on the rear stops of the units and the central support In the sketch below (in green) a beveled pressure pad is shown, which follows the inclined profile and thereby presses it against the (red-marked) shim on the stop. Location: Garbsen Dsdoxnlgcjpfx Ad Neur

Stav: dobrý (použitý), Kód: 0321 Značka: SCM Model: MULTIFLEX C - CE štandard Automatizované pracovné centrum na výrobu okenných rámov určené na čapovanie, profilovanie a kontúrovanie – max. hrúbka obrobku 140 mm – CE štandard Technické údaje Automatický vozík s prítlačným dorazom Maximálna pracovná dĺžka: 2800 mm Min./max. hrúbka obrobku: 30/140 mm Priemer priebežnej píly na odstrihovanie koncov: 400 mm – motor 4 HP Užitočná dĺžka čapovacieho vretena: 320 mm – motor 10 HP Priemer vretena: 50 mm Maximálny priemer nástroja: 350 mm Profilovacie vretená: 1. protisplinterové profilovacie vreteno – dĺžka 320 mm – motor 7,5 HP – priemer nástroja 220 mm 2. profilovacie vreteno – dĺžka 320 mm – motor 7,5 HP – priemer nástroja 220 mm Minimálny a maximálny priemer nástrojov profilovacích vretien: 100/220 mm Priemer profilovacích vretien: 50 mm Nástrojová skupina: Zuani Plynulo nastaviteľný posuv Dusdpfxjytn U Io Ad Nsr Skupina na spätné získavanie zasklievacích líšt – motor 3 HP – priemer odsávacieho hrdla 50 mm Celkové rozmery: 2400 x 3300 x 2000 mm (v x š x h) Hmotnosť: 2200 kg

Stav: použitý, Rok výroby: 2021, Number of spindles: 5 pcs. Working width: 250 mm Planing height: 160 mm Length of surfacing table: 2500 mm Feed motor: 4 kW Feed speed: 6–24 m/min Control system: K2 Basic 7" Touch KUPER SWT XL-5 AUTOMATIC PLANING AND MOULDING MACHINE --- AS NEW, DEMONSTRATION UNIT! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 – 6,000 rpm; spindle 4,500 to 8,000 rpm - Width and height adjustable via motor: left spindle radial upper spindle axial - Feed beam motorised positioning - Additional motorised adjustments: right spindle radial and axial left spindle axial - Working width: 250 mm DETAILED TECHNICAL DATA --- Working width (with tool diameter 125–163 mm): 15 – 230 mm Working height (with tool diameter 125 mm): 10 – 160 mm (tool diameter up to 163 mm): 10 – 160 mm Minimum workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Processing of workpieces depends on the following operating parameters: Material, wood moisture, tools, chip removal diameter and feed speed. If necessary, adjustment of operating parameters is required. SPINDLE CONFIGURATION --- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM --- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency-controlled: 4000–6000 rpm Tool diameter: 125–160 mm Rabbetting device: diameter difference 20–25 mm to planing head Important: Machine cannot be operated without rabbet cutter Extraction port D = 125 mm Tool clamping system: Quick-clamping nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT --- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4000 – 6000 rpm Tool diameter: 112 – 200 mm Axial adjustment 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Extraction port D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: Quick-clamping nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT --- Siemens IE3 motor with inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4000 – 6000 rpm Tool diameter: 112 – 200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Extraction port D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: Quick-clamping nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP --- Siemens IE3 motor with inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4000 – 6000 rpm Tool diameter: 112 – 200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction port D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: Quick-clamping nut "Pro-Lock" Duedpjwgwmnjfx Ad Ner 5th spindle: HORIZONTAL, BOTTOM --- (Specification truncated; provide remaining spindle details as needed)

Stav: použitý, číslo stroja/vozidla: 008116, Maximálna výška opracovania: 120 mm Duodpfx Aow Iddzed Nsr Maximálna posuvná rýchlosť: 25 m/min Počet pracovných hriadeľov: 6

Stav: použitý, Rok výroby: 2009, celková šírka: 1 800 mm, celková výška: 1 650 mm, Empty weight: 2,400 kg Dimensions (L x W x H): 350 x 180 x 165 cm Motor configuration: Bottom, 5.5 kW Right, 5.5 kW Left, 5.5 kW Top, 7.5 kW Bottom, no motor, but optional spindle - Year of manufacture: 2009 - Documentation available: Yes - CE certificate present: No - Serial number: AA2/001125 - Number of spindles [pcs.]: 4 - └ Spindle 1: - Spindle diameter [mm]: 40 - └ Spindle 2: - Spindle diameter [mm]: 40 - └ Spindle 3: - Spindle diameter [mm]: 40 - └ Spindle 4: - Spindle diameter [mm]: 40 - Min. planing width [mm]: 25 - Max. planing width [mm]: 240 - Min. planing height [mm]: 6 - Max. planing height [mm]: 120 - Feed table length [mm]: 2000 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 2.2 - Extraction nozzle diameter [mm]: 120 - Voltage [V]: 400 - Power consumption [A]: 58 - Fuse [A]: 63 - Transport dimensions: 3500mm x 1800mm x 1650mm (L x W x H) - Transport weight [kg]: 2400kg - Transport packages [pcs.]: 1 Dedpfxownh Ire Ad Nsur Financial information VAT: The stated price is net of VAT VAT/margin scheme: VAT can be deducted for businesses Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels

Stav: použitý, Rok výroby: 2018, Počet motorov: 1 kus Pracovná dĺžka: 2500 mm Ovládanie: nie Jednostranná píla na zasklievacie lišty Hecht ES 350 Pneumatický výkyv proti pevným dorazom. 45º/ 90º/ 135º s pneumatickým posuvom pílového kotúča Dsdpfjvpr N Rjx Ad Njur pneumatický výkyv cez manuálny výkyvný doraz s nohou stroja, pneumatické upínanie Pílový kotúč HM 350 x 3,0/2,2/30 Z 100 Rozmery stojana: dĺžka 700 mm, hĺbka 1.600 mm, výška 1.500 mm Dotykový doraz 1,5 m Podložka 1,5 m s podperou Dotykový doraz 3 m Predĺženie podložky z 1,5 m na 3 m s podperou Vkladacie dosky stola s drážkami pre preložené zasklievacie lišty HECHT ASB manuálny dĺžkový doraz s digitálnym displejom, 2500 mm S odsávacím zariadením (technické údaje podľa výrobcu – bez záruky!)

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Hrúbkovacia hobľovačka model MARTIN T 44 použitý stroj CE označenie: Áno pracovný stav: Vynikajúci technické údaje: použiteľná pracovná šírka mm: 630 maximálna pracovná výška mm: 250 maximálny odber mm: 8 2 posuvné rýchlosti m/min: 6 / 12 motorické polohovanie stola s digitálnym ukazovateľom 4 nože „Tersa“ hlavný výkon motora HP: 7,5 Dodpfsyml E Djx Ad Neur hmotnosť kg: 1115 napätie: 380/50

Stav: pripravené na použitie (použité), Rok výroby: 2010, Funkcionalita: plne funkčný, číslo stroja/vozidla: 114550, pracovná šírka: 230 mm, hobľovacia výška: 120 mm, počet vretien: 6, Automatic Planing and Moulding Machine Weinig Powermat 500 for four-sided planing and profiling of solid wood. The machine is equipped with CNC control and the proven PowerLock quick-change system. Additionally, it features a mechanized return feed for the planed parts, making it ideal for efficient production. Machine Equipment: - 6 spindles 1st spindle: 7.5 kW, 8,000 rpm 2nd spindle: 7.5 kW, 8,000 rpm, PowerLock 3rd spindle: 7.5 kW, 8,000 rpm, PowerLock 4th spindle: 7.5 kW, 8,000 rpm, PowerLock 5th spindle: 7.5 kW, 8,000 rpm, PowerLock 6th spindle: 7.5 kW, 8,000 rpm, PowerLock - Working width: 20 – 230 mm - Working height: 8 – 120 mm - Working table: 2.5 m (including jointer fence) - Top pressure rollers, spring-loaded - Lateral pneumatic pressure - Frequency-controlled feed with brake, feed speed: 5 – 30 m/min - Reduced feed roller spacing between feed pendulums (400 mm) - Additional feed rollers and reduced roller spacing - Durofer steel roller, self-cleaning - Infeed roller before the 1st bottom tool, pneumatically operated Dedpfxex Sxfvo Ad Njur - Siemens/Powercom control system The machine is in excellent, well-maintained condition, was professionally operated and regularly serviced, and will be in operation until 17.12.2026. Viewing of the machine in operation is possible at any time by appointment. The technical specification and machine layout can be found in the documents.

Stav: generálne opravený (použitý), Funkcionalita: plne funkčný, maximálna hrúbka hrany: 15 mm, celková hmotnosť: 4 000 kg, OTT olepovačka hrán TYP Strom+ voliteľne s návratom TransCompakt alebo TransLift. Stroj je po továrenskej renovácii a predáva sa so zárukou v Nemecku. Nástroje nové, reťazové platne a remene nové. Pre lepidlá PUR a EVA. Alternatívne máme prístup aj k modelom Tornado+ a StrongEdge, taktiež po továrenskej renovácii. Dsdeyn Am Iopfx Ad Nsur

Stav: použitý, Rok výroby: 2021, Number of spindles: 5 pcs Working width: 230 mm Planing height: 160 mm Jointers table length: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min Control: K2 Basic 7" touch screen KUPER SWT XL-5 AUTOMATIC PLANING AND MOULDING MACHINE ----- AS NEW, DEMONSTRATION MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled, 4,000 – 6,000 rpm - Width and height positioned via motor: left spindle radially upper spindle axially - Feed carriage motorized positioning DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125–163 mm): 15 – 230 mm Working height (with tool diameter 125 mm): 10 – 160 mm (tool diameter up to 163 mm): 10 – 160 mm Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Processing of the workpieces depends on the following operating parameters: material, wood moisture, tooling, chip removal diameter, and feed speed. If required, operating parameters have to be adjusted. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM Dujdpewgwmhofx Ad Nsr ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency-controlled: 4000–6000 rpm Tool diameter: 125–160 mm Rabbet arrangement: diameter difference 20–25 mm to planing head Note: machine cannot be operated without a jointer cutter Extraction nozzle: D = 125 mm Tool clamping system: quick-release nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4000 - 6000 rpm Tool diameter: 112 - 200 mm Axial adjustment range: 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-release nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4000 - 6000 rpm Tool diameter: 112 - 200 mm Axial adjustment range: 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-release nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4000 - 6000 rpm Tool diameter: 112 - 200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-release nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled...