Štvorsídlové hobľovačky SCM Superset NT 2009

SCM Superset NT

Stav: použitý, Number of spindles: 6 Working width: 240 mm Planing height: 200 mm Infeed table length: 2,500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Dimensions (L/W/H): 5,000 x 1,750 x 1,700 mm SCM Superset PLUS Comp. 31 – also suitable for window production ----- Machine has been cleaned and functionally tested! Technical specifications: ----- Working width: max. 240 mm Working height: max. 200 mm Feed speed: 6 to 36 m/min 1. Spindle ----- First lower spindle, horizontal Motor with brake: 11 kW Diameter: 40 mm Speed: 6,000 rpm 2. Tool Holder HSK ----- First right tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning 3. Tool Holder HSK ----- First left tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setting (setup) 4. Spindle ----- First upper spindle, horizontal Motor with brake: 11 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setting (setup) 5. Spindle ----- Second upper spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setting (setup) 6. Spindle ----- Second lower spindle, horizontal Nwodpfxovnv Uze Agwop Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Additional technical features: ----- 2 feed units after the upper spindles to reduce the axis distance from 620 mm to 450 mm Air-cushion lubrication for the worktable 2 x milling units with belt drive and quick-change HSK 85 system at positions 2 and 3 Working height 200 mm instead of 120 mm 5 x electronic horizontal positioning at positions (2, 3, 4, 5, 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning at positions (2, 3, 5, 6) 3 x electronic tool diameter setting (setup) at positions (3, 4, 5) Mobile 10 controller PRL equipment for glazing bead removal on the 2nd upper horizontal spindle Machine comes without tooling (Technical data according to manufacturer – subject to confirmation!)

Stav: použitý, celková hmotnosť: 24 000 kg, priemer rotora: 640 mm, počet čepelí: 114, dĺžka rotora: 2 500 mm, výkon: 247 kW (335,83 k), No. 10023 Single-shaft shredder Vecoplan VAZ 2500 Used machine, year of manufacture approx. 2006 Completely overhauled in 2022 Approximately 700 operating hours since overhaul Areas of application: residual wood, waste wood, packaging material, film, plastic, paper, textiles, household waste, commercial waste, production waste as bulk material, production waste in bales 247 kW Rotor length: 2,500 mm Rotor diameter: 640 mm 114 pieces of 60x60 mm cube knives, 4 rows Shredding possible to a granule size of approx. 10 - 250 mm Screen basket: 50 mm Throughput capacity up to 25 tons per hour / throughput waste wood approx. 30 tons per hour Material feed by hydraulic pusher Scope of delivery: machine, hopper, control cabinet, cooler Mechanization optionally available Nwsdpswh T N Uefx Agwep Transport dimensions approx. 4,750 x 4,640 x 2,340 mm (L x W x H) Weight approx. 24,000 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without disassembly, transport or installation Subject to errors in description and price Disassembly, transport, and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended The sale takes place in its current condition Technical data, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty provided for used machines, applies: “bought as seen” Photos and videos are for reference only and do not represent the actual scope of delivery Terms of payment: prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Stav: pripravené na použitie (použité), pracovná šírka 240 mm pracovná výška 120 mm 6 hláv usporiadanie hláv: spodná/pravá/ľavá/horná/horná/spodná otáčky vretena 6000 ot./min – posledné dve 8300 ot./min nastavenie vretien v dvoch osiach priemer vretena 40 mm elektrické nastavenie výšky hobľovania Nwjdpfx Agjw Afguowep plynulá regulácia posuvnej rýchlosti pneumatický prítlak podávacích valcov

Stav: pripravené na použitie (použité), Rok výroby: 2017, Funkcionalita: plne funkčný, číslo stroja/vozidla: AA2/004283, pracovná šírka: 240 mm, TECHNICAL DETAILS Max. planing width: 240 mm Cutter block diameter: 120 mm Number of knives: 4 Electrical Data Voltage: 400 V Connected load: 10 kVA General Information Year of manufacture: 2017 Weight: 3,350 kg Nsdpfx Ajwkq Ndogwjwp EQUIPMENT - Documentation available - CE marking present

Stav: veľmi dobrý (použitý), Rok výroby: 2023, prevádzkové hodiny: 1 180 h, celková hmotnosť: 28 000 kg, Na predaj na zákazku! Nodew Ha Iuepfx Agwjwp

Stav: použitý, Rok výroby: 2017, Počet vretien: 5 ks Pracovná šírka: 240 mm Výška hobľovania: 120 mm Dĺžka zrovnávacieho stola: 2500 mm Podávací motor: 4 kW Podávacia rýchlosť: 6–36 m/min Hmotnosť cca: 3500 kg Ovládanie: SCM Control 10 SCM Superset NT s vratným vedením obrobku ----- Stroj kompletně preverený. Krátke zhrnutie: ----- - 5 vretien - silné motory - ľavé a horné vreteno nastaviteľné pre šírku a výšku - s vratným vedením obrobku k obsluhujúcemu 1. vreteno ----- Prvé spodné horizontálne vreteno Motor s brzdou: 7,5 kW Priemer: 40 mm Otáčky: 6 000 min⁻¹ 2. vreteno ----- Prvé pravé vertikálne vreteno Motor s brzdou: 7,5 kW Priemer: 40 mm Otáčky: 6 000 min⁻¹ T-Set rýchloupínací systém 3. vreteno ----- Prvé ľavé vertikálne vreteno Motor s brzdou: 7,5 kW Priemer: 40 mm Otáčky: 6 000 min⁻¹ T-Set rýchloupínací systém Elektronické horizontálne polohovanie / motorizované nastavenie šírky 4. vreteno ----- Prvé horné horizontálne vreteno Motor s brzdou: 11,0 kW Priemer: 40 mm Otáčky: 6 000 min⁻¹ T-Set rýchloupínací systém Elektronické radiálne polohovanie / motorizované nastavenie výšky 5. vreteno ----- Druhé spodné horizontálne vreteno Motor s brzdou: 7,5 kW Priemer: 40 mm Otáčky: 6 000 min⁻¹ SCM Control 10 – užívateľské rozhranie Nwedpfx Agjwwl Nljwep Vrátane vratného vedenia obrobku Vrátane použitých hobľovacích hláv v dodávke (technické údaje podľa výrobcu – bez záruky!)

Stav: pripravené na použitie (použité), pracovná šírka: 240 mm pracovná výška: 150 mm počet hláv: 5 usporiadanie hláv: dole/vpravo/vľavo/hore/dole otáčky vretena: 6000 ot./min priemer vretena: 40 mm minimálna veľkosť hlavy: 100 mm maximálna veľkosť hlavy: 200 mm Nwodpow Aflqsfx Agwjp výkon motorov: 3x 5,5 kW; 2x 4 kW; 2,2 kW pneumaticky prítlačné valce rok výroby: 2010

Stav: použitý, Rok výroby: 2007, No. 3177 Optimization Crosscut System Grecon Dimter OptiCut 200-1 Nsdpsu Atmuofx Agwswp Used, year of manufacture 2007 For cutting to fixed lengths Wood dimensions to be processed: Infeed lengths min./max. 3,000 - 5,000 mm Infeed widths min./max. 80 - 200 mm Infeed thicknesses min./max. 38 - 80 mm Maximum wood cross-section: 200 x 50 mm Final wood length min./max. 700 - 1,000 mm Average number of cuts per board: 5 Wood types: softwood or hardwood System performance: Feed speed max. 180 m/min, steplessly adjustable Cutting cycle time incl. braking 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt in front of saw Length 1.5 m, coupled with the feed motor of the saw Pos. 2: Automatic crosscut saw OptiCut 200-1, left-hand version With integrated length measuring wheel and integrated waste ejection system Graphical input terminal, 1/4 VGA display, with numeric keypad and function keys, OptiCom software package for system control included The machine is loaded from the left Pos. 3: Outfeed conveyor belt / sorting station With drive unit, without ejector Belt length approx. 1.5 m Machine already dismantled and stored The infeed table was not used by the previous owner. Two feed rollers were installed for material feed. The feed table is present, only the rubber belt is missing. Sale on behalf of the customer, ex location Austria, without transport and installation Errors in description and pricing excepted Transport and loading by us available as an option To avoid possible misunderstandings, an on-site inspection is recommended and can be arranged by appointment Sale is in as-is condition Technical data, condition descriptions, year of manufacture and scope of delivery according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded. Applies: "purchased as inspected" Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Stav: dobrý (použitý), Dobrý, použitý stav Hlavný motor: 11 kW Výkon až do maximálne 200 kg/h Rok výroby 12/2008 / technicky preverené v 01/2025 Briketa: 150x60 mm Njdpfx Aget Hxudswewp . *Použitý stroj, predaj v stave, ako bol videný Záruka funkčnosti pri odovzdaní

Stav: použitý, Rok výroby: 2014, Number of spindles: 5 units Working width: 230 mm Planing height: 120 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 5–30 m/min Control: Memory function Weinig Powermat 600 Compact ----- Machine will be cleaned and fully checked. Short summary: ----- - 5 spindles - High-power motors - Left and top spindle electronically controlled for width and height Detailed description: ----- Technical data: Working width: 20–230 mm Working height: 10–120 mm Number of spindles: 5 1st spindle – bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Cutterblock diameter: 125–145 mm Cutterblock diameter for rebate cutters: 130–160 mm Axial adjustment travel: 5 mm Rebating device MarathonCoating for infeed table in front of 1st lower cutterblock Electronic digital readout for radial adjustment 2nd spindle – right ----- Motor with brake: 11.0 kW Common motor with left cutterblock Spindle diameter: 40 mm Speed: 6,000 rpm Cutterblock diameter 40 mm below table: 93–200 mm Cutterblock diameter 55 mm below table: 93–180 mm Cutterblock diameter for straight knife heads max. 163 mm Max. tool diameter behind fence line: 180 mm Max. profiling depth: 35 mm Axial adjustment travel: 55 mm 3rd spindle – left ----- Motor with brake: Common motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Cutterblock diameter 40 mm below table: 93–200 mm Cutterblock diameter 55 mm below table: 93–180 mm Cutterblock diameter for straight knife heads max. 163 mm Max. profiling depth: 35 mm Axial adjustment travel: 55 mm Radial spindle adjustment CNC-controlled 4th spindle – top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Cutterblock diameter: 93–200 mm Cutterblock diameter for straight knife heads max.: 180 mm Max. profiling depth: 35 mm Axial adjustment travel: 40 mm Radial spindle adjustment CNC-controlled Divided pressure shoe in front of top cutterblock, adjustable to the cutterblock diameter and swing-away from the tool, spring-loaded. Pressure shoe before and extraction after the top spindle with electronic digital indicators, integrated into the memory function or PowerCom. 5th spindle – bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Cutterblock diameter: 93–200 mm Max. profiling depth: 15 mm Axial adjustment travel: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5–30 m/min Infeed roller before 1st lower cutterblock, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Feed roller adjustment relative to the left cutterblock, axial 35 mm Machine electrics Nodpfxswzmu Rs Agwswp ----- Operating voltage: 400 V (voltage range 380–420 V), 50 Hz All spindles IE2 version Electrical design to DIN VDE 0113, electrical equipment of industrial machines EN60204, IEC-204-1. Further electrical regulations not considered. Mach...