5-osové obrábacie centrum

SCM ACCORD WD

Stav: použitý, Number of sanding units: 4 pcs. Sanding width: 190 mm Maximum sanding height: 180 mm Control: yes Weight: 3300 kg Dimensions (L/W/H): 2600x920x1890 mm Extraction port diameter: 2x180, 2x120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sander + disk unit from above/below Manufacturer's description: ----- Double-sided four-belt single-wood sanding machine for sanding solid wood such as window frames, etc. Highly robust premium design with innovative details. Suitable for continuous heavy-duty use, even with high material removal rates. - Successive sanding units for pre-sanding, fine sanding, and finish sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see special equipment below) - Direct-driven sanding rollers for slip-free power transmission - Maintenance- and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional accuracy - External cooling of the sanding zones for cooler sanding and longer belt service life - Forced pneumatic-controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Fine dust extraction at the tension rollers - Integrated brushing and finishing unit with large sanding dust extraction - Motorized sanding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts, dust and dirt protected - Adjustment of material removal on the underside via precision threaded spindle with scale ring (resolution 0.1mm) - Sanding belt tension via pneumatic cylinder with constant tension force - Quick sanding belt changes with pneumatic belt relaxation in seconds - Possibility to adjust belt tracking during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, slip- and adhesion-proof transport belts over heavy cast iron tables with finely planed surfaces and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and even workpiece transport - Feed gear motor with stepless speed adjustment 4-20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2-180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4-20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with soft disc 2740 mm): 2600 mm - Length with control panel (with soft disc 3035 mm): 2985 mm - Width: 880 mm Nwedpfxovu Hgbo Ag Asc - Height: 1910 mm - Weight approx. 3300 kg - Operating voltage: 400 Volt, 50 Hz, 3P - CE-certified Equipped with the following options: - 4-belt sanding belt air blast directly via nozzles at the radii ...

Stav: nový, Počet brúsnych agregátov: 8 ks Šírka brúsenia: 180 (260) mm Maximálna výška brúsenia: 160 mm Rozmery (dĺžka/šírka/výška): 3065x1600x1900 mm Hmotnosť stroja cca 1500 kg LÖWER-Leistomat SD ----- Automatická jemná brúska na drevo (hladenie, odstránenie vlákien a zaobľovanie hrán) alebo medzibrúsenie profilovaných okenných priečok. So Softdisc technológiou pre viditeľné plochy a automatickým nastavením profilu a šírky. - 2 lamelové valcové agregáty po bokoch, každý s výkonom 0,75 kW, L=120 mm, D=200 mm - 1 Softdisc agregát Ø=200 mm hore, 0,75 kW - 1 lamelový valcový agregát L=200 mm hore, 0,75 kW - 1 Softdisc agregát Ø=200 mm dole, 0,75 kW - 1 lamelový valcový agregát L=200 mm dole, 0,75 kW - 2 lamelové valcové agregáty po bokoch, každý s výkonom 0,75 kW, L=120 mm, D=200 mm Nwodsvnv Uhepfx Ag Ajc - Lineárne vedenie všetkých brúsnych agregátov cez lineárne guľôčkové ložiská na tvrdených hriadeľoch - Časovo riadené ponorenie všetkých lamelových valcových agregátov priamo nad vstupné hrany obrobku. Vďaka ponoreniu je možné nastaviť agregáty hlbšie do profilu. - Motorické nastavenie hrúbky obrobku stroja - Variabilná otáčková rýchlosť brúsnych lamiel pomocou frekvenčného meniča na prispôsobenie intenzity brúsenia (samostatne pre disky, ploché valce a bočné valce) - Diskové agregáty ako Softdisc s upínaním na suchý zips pre brúsne kotúče (brúsenie dreva) - Posuv cez tri spodné a jeden horný dopravný pás a odpružené prítlačné valce s plynulo nastaviteľnou rýchlosťou 4–15 m/min - Nastaviteľné parametre cez dotykový panel: hrúbka obrobku, šírka obrobku (ľavé bočné agregáty samostatne), hĺbka ponorenia bočných agregátov, otáčky vretena, rýchlosť posuvu - Ukladanie parametrov ako programy stroja v programovom režime - Práca v automatickom režime s bezdotykovým rozpoznaním šírky a profilu obrobku, ako aj automatickým nastavením brúsnych agregátov na šírku a tvar profilu obrobku (výška obrobku sa nastavuje manuálne) - Pneumaticky takovaný poháňaný vťahovací valec, automatické upnutie obrobku a vťahovanie po nastavení agregátov - Výstražné kontrolky červená/zelená na signalizáciu prevádzkyschopnosti - Minimálna dĺžka obrobku 380 mm - Šírka dopravného pásu 200 mm - Max. šírka obrobku 180 mm (260 mm pri použití obojsmernej prevádzky) - Výška obrobku 12–160 mm - Odsávacie pripojenie: 4x 100 mm a 2x 80 mm priemer - Senzorom riadené očistenie nástroja priamo pri diskoch - Dĺžka (kryt) x šírka x výška (mm): 3065x1600x1900 - Celková dĺžka: 4365 mm (vrátane valčekovej dráhy s integrovaným rozpoznaním šírky obrobku) - Hmotnosť: 1500 kg - Prevádzkové napätie: 400V, 50Hz, 3P, pripojenie na vzduch 6 bar - Vyhotovenie CE ----- Cena vyššie uvedeného stroja na vyžiadanie! ----- Príplatkové príslušenstvo: Sada náhradných lamiel pre Leistomat SD-200 tvoria: Plošné agregáty: 30 pásikov EH45/200-7 (valce) 30 pásikov EH45/200-20 (valce) Agregáty na falce: 96 pásikov M55/120-4 SmartFlex lamelový disk Ø200 solid s 30 drážkami, dĺžka 50 mm Sada náhradných lamiel pre SmartFlex lamelový disk tvoria: 60 pásikov M35/50 K 180-7 S Brúsny kotúč VB pre Softdisc D=200 mm zrno 220 so zamatovým podkladom (suchý zips), balenie 100 ks. Brúsny kotúč VB pre Softdisc D=200 mm zrno 280 so zamatovým podkladom (suchý zips), balenie 100 ks. ----- ...

Stav: nový, Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 180 mm LÖWER DoubleSander Solid DSM 2004 ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood such as window profiles, etc. Extremely robust premium design with innovative features. Suitable for continuous heavy-duty use, even with higher material removal rates. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finish sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubber-coated roller and pad 3. Finishing unit with fiber brush - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding pads with excellent thermal conductivity and precision dimensional stability - External cooling of sanding zones for cooler sanding performance and longer belt life - Forced, pneumatically controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Extraction system for airborne dust at the tension rollers - Integrated brushing and finishing device with large dust extraction system Nsdpfsvnv Tqox Ag Ajwc - Motorized thickness adjustment via precision leadscrews and large linear ball bearing sets mounted on hardened and ground precision shafts with dust/dirt protection - Removal adjustment at the lower unit via precision leadscrew with scale ring indicator (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinder with constant tension pressure - Quick sanding belt change with pneumatic belt release within seconds - Adjustable belt tracking during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for overdimensioned workpieces - Workpiece feed via calibrated, slip-resistant and adhesive feed belts over heavy cast iron tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece feed - Feed gear motor with infinitely variable speed 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (resolution 0.1 mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm each, 0.37 kW - Extraction nozzle: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with soft disc 2,740 mm): 2,600 mm - Length with control panel (with soft disc 3,035 mm): 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 Volt, 50 Hz, 3-phase - CE compliant model ----- Price for the above-mentioned machine on request! ----- Optional accessories at extra cost: Workpiece air blow-off - Arranged via jets above and below at the machine outfeed, pneumatically controlled Sanding belt air blow-off 4-belt - Jets arranged directly at the radii of the tension rollers inside the extraction, timer-controlled on/off respectively 5...

Stav: použitý, Rok výroby: 2022, Plus freight €4,000.00, plus setup and commissioning €5,000.00 Nwodpfx Aevvkipeg Aec Sanding Line B Sand 5 with Partial Rotator Operating Principle: The panel is placed on the infeed table. It enters the partial rotator and is centered. It is then sanded in the sanding machine, first passing through and then returning. The panel is rotated in the partial rotator. The second side is sanded in the sanding line. Afterwards, there are two options: either the panel is transferred to the outfeed table and unloaded, or it is returned to the infeed table and unloaded there (the second option increases the processing time). Sanding Line Equipment: - 1 upper sanding lamella roller, suitable for surfaces. Power: 3 kW; Diameter: 420 mm; Length: 1300 mm. - Cross brush, suitable for sanding cross grain. Diameter: 420 mm; Length: 300 mm. Power: 1.1 kW. - Cross brush, suitable for sanding cross grain. Diameter: 420 mm; Length: 300 mm. Power: 1.1 kW. - 3 upper sanding discs for perfect trimming of longitudinal and cross wood fibers. Power: 1.5 kW each; Diameter: 400 mm. - Disc brush for chamfering the edges. The unit functions as a deep brush. Once the panel edges are detected, it follows the door edges. Power: 0.75 kW; Diameter: 250 mm. Machine Features: - The unique sanding system of this machine guarantees a perfect wood surface finish and/or intermediate sanding of panels. - All tools are controlled by frequency converters. - All brushes are equipped with quick-change sanding strips that do not require hub replacement. - The discs are equipped with air nozzles to optimize cleaning and cycle time. - Sanding pads equipped with hook-and-loop fastener system. - Feed and rotation speeds are controlled by PLC to prevent edge chipping. - High-quality sanding on all four sides thanks to the machine’s consistent material removal. - Automatic and fast adjustment of units. - Consistent through-feed height: PLC and industrial software enable integration into a surface treatment line. - Infinitely variable speed of discs, brushes and feed via frequency inverter, full equipment. - Right/left rotation of discs and brushes with different grit sizes. - Individually powered adjustment of discs, rollers and belts. - Additional adjustment for brushes and discs to optimize abrasive use and enable adjustment of sanding pressure on surfaces. - Sturdy machine base made of steel tubing ensures best rigidity, stability and flatness. - Planed upper machine bed for optimal parallelism of the working surface for the sanding discs. - All carriages of the aggregate are built with linear ball bearing guides, ensuring high load capacity and precision. - Motorized feed belt controlled by frequency inverter, 0.55 kW. - Machine doors equipped with safety devices. - Machine doors feature windows for observing workpieces during operation. - Rubber-coated pressure rollers (D 80 mm) under the units hold the workpieces in place during processing. - Low follow-up costs due to individual replacement of lamellas. - Low operating noise due to the closed machine housing. - All units have suction hoods with dedicated extraction points. Cover plate with extraction nozzle. - The entire machine housing is fully enclosed for a clean environment.

Stav: veľmi dobrý (použitý), ITALMECCANICA PROFILWOOD MAK6B brúsny automat Nwedpfx Agedykwls Ajc 6 brúsnych jednotiek, každá s výkonom 1,5 kW, maximálna pracovná šírka 250 mm, hĺbka 0 - 250 mm, minimálna, rozmery v mm: cca 4700 x 2000 x 2300, hmotnosť v kg: cca 3000, (Makor, Delle Vedove, Venjakob, Flader)

Stav: dobrý (použitý), Funkcionalita: plne funkčný, Ručné ovládacie prvky s káblom 20 metrov Nwodpfoxg Rn Nex Ag Ajc

Rok výroby: 2022, Stav: použitý, Počet brúsnych jednotiek: 6 ks Brúsna šírka: 45–165 mm Maximálna brúsna výška: 45–92 mm Hmotnosť: 2200 kg Ecoline Q-SAND 6 Predaj na zákazku ----- Nwodpfsxyafkox Ag Ajc Plný popis ako PDF v prílohe! Krátky popis: Stroj s podávacím pásom a automatickým rozpoznávaním výšky. Má 2 brúsne taniere hore a 2 brúsne taniere dole, ktoré sú vždy spojené s kefovacou jednotkou. Technický opis výrobcu: Ecoline Q-Sand – ideálny brúsny stroj pre hranoly a ďalšie výrobky. Vyvinutý na prácu na oboch stranách obrobku s trojrozmerným nastavením, Q-Sand zaručuje maximálnu presnosť a rovnomernosť opracovania. Je vybavený brúsnymi kotúčmi, lamelovými kefami a dvojitým kotúčom pre efektívnejšie odoberanie materiálu, čo zlepšuje priľnavosť pre následné úpravy. Q-Sand je možné inštalovať do výrobnej linky alebo, vďaka plnej autonómii prevádzky, používať samostatne. Je ideálny aj pre okenné rámy, trámy a zákazkové produkty, pričom optimalizuje čas spracovania pomocou automatizovaných systémov a pokročilej výrobnej kontroly. ----- Cena vyššie uvedeného stroja na požiadanie! ----- (Technické údaje podľa výrobcu – bez záruky!) Všetky uvedené ceny sú bez DPH. K cene bude pripočítaná zákonná DPH. Video je od výrobcu Ecoline a zobrazuje nový stroj.