Spracovateľské centrum pre okná a dvere

Scm Integra System

Integrated CNC machining center for windows and doors, consisting of:

A) Automatic Loader, model “SP”
Automatic loader for Base SP, including no. 1 moulding machine
- Automatic loader consisting of:
- Table with motorized belts
- Automatic device for transferring parts from the buffer to the feed area of the moulder
* Minimum part length: 450 mm, maximum: 3200 mm
* Minimum part width: 40 mm, maximum: 230 mm
* Minimum part thickness: 40 mm, maximum: 120 mm
* Operating cycles: 10/min
* Chain feed speed on the table: 7 m/min
* Load table dimensions: 2800 x 2150 mm

B) Automatic Moulding Machine, model SUPERSET NT C 6
Position 1 = Planing spindle
Tjdpfx Afoixxwmsajf
Position 2 = 1st right vertical spindle
Position 3 = 1st left vertical spindle
Position 4 = 1st upper horizontal spindle
Position 5 = 1st lower horizontal spindle
Position 6 = Sash bar reprocessing group
Entry level at 2500 mm
Feed speed 6-36 m/min via inverter (#1)
- Motor power 5.5 HP (4 kW)
Horizontal presser before planer with pneumatic disengagement from the control panel
Pneumatic disengagement for the feed unit before the planing spindle
Tandem feed group before right vertical spindle with rapid disengagement
Feed groups after top section to reduce trailing section from 620 mm to 450 mm
Entry guide with bearings for automatic feeders
Electrical setup for use with automatic loaders
Manual central lubrication
Pump for lubricating the work table with automatic control
Device for in-line integration with INTEGRA SYSTEM
- Height of working table raised to 970 mm
- Signal light at the machine inlet
- Piece counter
Separate control panel

POS. 1
High-precision spindle
10 HP (7.5 kW) motor instead of 5.5 HP (4 kW)
Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW)
T-SET quick tool clamping
- Allows locking/unlocking of tools simply using an air gun

POS. 2
High-precision spindle
10 HP (7.5 kW) motor instead of 5.5 HP (4 kW)
Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW)
Vertical spindle with 180 mm usable length
T-SET quick tool clamping
Electronic vertical positioning

POS. 3
High-precision spindle
10 HP (7.5 kW) motor instead of 5.5 HP (4 kW)
Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW)
High-precision spindle
Vertical spindle with 180 mm usable length
T-SET quick tool clamping
Electronic horizontal positioning

POS. 4
High-precision spindle
10 HP (7.5 kW) motor instead of 5.5 HP (4 kW)
Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW)
Speed: 8,300 rpm
T-SET quick tool clamping
Electronic vertical positioning

POS. 5
High-precision spindle
10 HP (7.5 kW) motor instead of 5.5 HP (4 kW)
Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW)
Speed: 8,300 rpm
T-SET quick tool clamping

POS. 6
Glazing bead reprocessing unit
Features:
PRL enables automatic transition from planing to bead reprocessing and vice versa.
- Operating group with 30 mm shaft diameter, 30 mm length
- Electronic horizontal positioning
- Electronic vertical positioning
- Hardware and PLC modifications for axis management
- Tandem outfeed and modifications

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.