Jednotka regulácie teploty / chladič

Single Temperiertechnik GmbH Chill Advanced C-25-L

*Technical specifications:
- Air-cooled, 25.5 kW based on +10°C supply temperature at an ambient temperature of +32°C
- Supply temperature range: +5°C to +30°C
(Optional: lower temperatures down to -5°C available)
- Air volume: 8,000 m³/h
- Max. air inlet temperature: +30°C
- Optional heating capacity up to 24 kW

*Pumps:
- Delivery rate up to 150 l/min
- Delivery pressure up to max. 4 or 7 bar
- Motor power: 1.1 or 2.2 kW

*Dimensions:
- L/W/H: 1,450 mm x 750 mm x 1,680 mm
- Unladen weight: approx. 480 kg
- Circulating medium connection: DN 32 internal thread

*Details & Highlights:
- Internal refrigerant: R 123 a
- Power supply: 380–425V/50Hz

- Control and regulation unit SBC-T
- Setpoint and actual value display, alarm display
- Fully hermetic reciprocating compressor
- Refrigerant collector with safety valve in accordance with DIN EN 378
- Power adjustment
- Frost protection monitoring
- Flow monitoring
- Condenser grille cover
- Oil sump heater
- Drain facility
- Level monitoring via float magnetic switch
- Installed dirt strainer in the return line for the circulating medium
- Bypass valve between supply and return line for pump protection, fixed setting
- High and low pressure cut-outs in accordance with DIN EN 378
- Stainless steel tank, capacity: 80 litres, open system fully insulated
- Self-supporting housing with castors, mobile
- Unit for indoor installation
- Control cabinet IP 54

Other performance classes available on request. Visit our website for further details.

*This unit complies with European Directives. Other directives and standards are only complied with if listed in the order confirmation. This technical specification outlines the standard configuration; custom requirements deviating from the standard are specified in quotations or order confirmations.
Ppodjg Ewwropfx Anper

Inzerát bol automaticky preložený. Chyby v preklade sú možné.