Podávač

STÓŁ ROLKOWY

Stav: použitý, Rok výroby: 2022, Plus freight €4,000.00, plus setup and commissioning €5,000.00 Sanding Line B Sand 5 with Partial Rotator Operating Principle: Dsdpfx Adevvkipeyoup The panel is placed on the infeed table. It enters the partial rotator and is centered. It is then sanded in the sanding machine, first passing through and then returning. The panel is rotated in the partial rotator. The second side is sanded in the sanding line. Afterwards, there are two options: either the panel is transferred to the outfeed table and unloaded, or it is returned to the infeed table and unloaded there (the second option increases the processing time). Sanding Line Equipment: - 1 upper sanding lamella roller, suitable for surfaces. Power: 3 kW; Diameter: 420 mm; Length: 1300 mm. - Cross brush, suitable for sanding cross grain. Diameter: 420 mm; Length: 300 mm. Power: 1.1 kW. - Cross brush, suitable for sanding cross grain. Diameter: 420 mm; Length: 300 mm. Power: 1.1 kW. - 3 upper sanding discs for perfect trimming of longitudinal and cross wood fibers. Power: 1.5 kW each; Diameter: 400 mm. - Disc brush for chamfering the edges. The unit functions as a deep brush. Once the panel edges are detected, it follows the door edges. Power: 0.75 kW; Diameter: 250 mm. Machine Features: - The unique sanding system of this machine guarantees a perfect wood surface finish and/or intermediate sanding of panels. - All tools are controlled by frequency converters. - All brushes are equipped with quick-change sanding strips that do not require hub replacement. - The discs are equipped with air nozzles to optimize cleaning and cycle time. - Sanding pads equipped with hook-and-loop fastener system. - Feed and rotation speeds are controlled by PLC to prevent edge chipping. - High-quality sanding on all four sides thanks to the machine’s consistent material removal. - Automatic and fast adjustment of units. - Consistent through-feed height: PLC and industrial software enable integration into a surface treatment line. - Infinitely variable speed of discs, brushes and feed via frequency inverter, full equipment. - Right/left rotation of discs and brushes with different grit sizes. - Individually powered adjustment of discs, rollers and belts. - Additional adjustment for brushes and discs to optimize abrasive use and enable adjustment of sanding pressure on surfaces. - Sturdy machine base made of steel tubing ensures best rigidity, stability and flatness. - Planed upper machine bed for optimal parallelism of the working surface for the sanding discs. - All carriages of the aggregate are built with linear ball bearing guides, ensuring high load capacity and precision. - Motorized feed belt controlled by frequency inverter, 0.55 kW. - Machine doors equipped with safety devices. - Machine doors feature windows for observing workpieces during operation. - Rubber-coated pressure rollers (D 80 mm) under the units hold the workpieces in place during processing. - Low follow-up costs due to individual replacement of lamellas. - Low operating noise due to the closed machine housing. - All units have suction hoods with dedicated extraction points. Cover plate with extraction nozzle. - The entire machine housing is fully enclosed for a clean environment.

Stav: nový, Rok výroby: 2026, Funkcionalita: plne funkčný, Valčekový podávač 3 m s mierkou je robustný valčekový dopravník určený na profesionálne podávanie a odoberanie materiálov počas obrábania. Vďaka vstavanému dĺžkovému mierke a použitiu desiatich ložiskových oceľových valčekov zabezpečuje vysokú presnosť polohovania, plynulý pohyb a odolnosť voči intenzívnej záťaži. Ideálne sa hodí ako valčekový dopravník pri pásových pílach, kotúčových pílach a centrách na rezanie oceľových profilov. Použitie Rezanie rúr, oceľových profilov a hriadeľov Závody na výrobu oceľových a priemyselných konštrukcií Obrábacie centrá a zámočníctva Výrobné linky s integráciou rezania a dopravy Štandardné vybavenie 10 oceľových valčekov 60 × 360 mm Pevný oceľový rám so spevnenými nohami Nastavenie výšky v rozsahu 650–1100 mm Meracia lišta s jasnou stupnicou Technické parametre PRIEMER VALČEKOV 60 mm DĹŽKA VALČEKOV 360 mm POČET VALČEKOV 10 Dusdpfxow H Rvcs Adyop DĹŽKA PODÁVAČA 3000 mm ŠÍRKA PODÁVAČA 450 mm NASTAVITEĽNÁ VÝŠKA 650–1100 mm MAXIMÁLNA NOSNOSŤ 900 kg HMOTNOSŤ 50 kg