Závitovacie valce UPWS 25

Thread rolling machine UPWS 25

Stav: použitý, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Clamping length/tool length: max. 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swivelling roll spindle for through-feed thread rolling - Four-stage roll spindle speed adjustment via gearbox - Hydraulic unit integrated in machine bed - Operating manual with electrical diagram Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, which have the same pitch as the workpiece, form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length is equal to the width of the thread dies. Through-feed rolling: Used when the thread length is greater than the thread die width. Through-feed dies have three sections – the entry, calibration, and exit zones. Godpfx Asuz If Nsl Tsbr Knurling rolls have no pitch and are set at the helix angle of the profile to be rolled. Helical rolls differ from knurling rolls in that their profile includes a pitch. The sum of the pitch angle and the swivel angle results in the helix angle of the workpiece.

Stav: použitý, Rok výroby: 1991, Workpiece diameter: 30 mm Thread length: 110 mm Thread pitch: 0.5–2.75 mm/rev Total power requirement: 4.5 kW Machine weight approx.: 1.7 t Space requirement approx.: [data missing] MONNIER & ZAHNER, Switzerland Thread Whirling Machine with Part Loading Device Type MZ 600, year approx. 1991, #3591 _____ Max. workpiece diameter: approx. 30 mm Max. workpiece length: approx. 110 mm Axial milling length: approx. 100 mm Module in steel: approx. 1 Number of worm leads: 1 Min./max. centre distance tool–workpiece: 0–70 mm Whirling head swivels: +/- 12° Tool size approx.: 70 x 16 mm Whirling head speeds: approx. 1,000–6,000 rpm Pitch range: approx. 0.5–2.75 mm/rev Whirling head drive approx.: 1.5 kW Total drive power: approx. 4.5 kW – 220V/380V / 50Hz Weight: approx. 1,700 kg Accessories / Special Equipment: Machine is used for the production of medical screws and is equipped with an automatic workpiece feeder via a Rübenach vibratory bowl feeder with pneumatic swing gripper for raw part loading, as well as with tailstock (pusher) and ejector in the workpiece spindle head. Pneumatic workpiece clamping system integrated in the workpiece spindle head. Finished parts are ejected and discharge into a collection container. The tool slide is configured as both longitudinal and cross slide: the longitudinal slide determines thread length and pitch via the leadscrew; the cross slide determines thread depth. Gbodet Hwzcepfx Al Tsr Copying device at the end of the cross slide with template holder for conical screws. Pitch gearbox in the workpiece spindle stock via change gears. Simple electric program control with display for the motion sequence. Fault indicator, workpiece counter, oil mist extractor, coolant unit, etc.

Stav: použitý, Rok výroby: 1986, celková hmotnosť: 6 500 kg, výkon: 42 kW (57,10 k), vstupné napätie: 380 V, dĺžka protahovania: 1 600 mm, počet broachovacích poloh: 1, priemer obrobku (max.): 500 mm, Manufacturer: Varinelli Milano Italy Model: BV 25 x 1600 x 500 Year of manufacture: 1986 Weight: 6,500 kg Machine No.: 3269 General / Technical Data: Vertical hydraulic internal broaching machine with a single broaching station Pulling force: 25,000 kg Broaching stroke: 1,600 mm Number of broaching stations: 1 unit Passage width between the cylinders: max. 540 mm Cutting speed: hydraulically and continuously adjustable from 1 m/min up to max. 8 m/min Return speed: hydraulically and continuously adjustable up to max. 18 m/min Machine space requirement: see machine layout image Power supply / Connected load: 380 Volts 50 Hz / 42 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system features a spring-loaded mechanical locking system (DIN 1417) on the pull bridge. The tool feeder system is hydraulically and mechanically locked. The machine has a coolant system with an integrated chip conveyor for installation in a pit. Remarks: The machine is still in its original paint. It is designed for use in series production of medium and large batch sizes; for optimal operation, a foundation (pit) is ideally required. Pull heads and extractor needles are available upon request. The machine can be inspected at our warehouse. General Information We constantly have a large selection of approximately 80 used broaching machines with pulling capacities from 3,000 kg to 63,000 kg in both horizontal and vertical designs in stock. A large portion of the stocked broaching machines is ready for demonstration and can be inspected. Gjdpfx Alewqmaxo Tsbr If required, we can also offer you used equipment such as pull heads, extractor needles, broaching tools, and other specific accessories. Our company is a contract broaching specialist and, with 50 years of experience in broaching technology, we can also assist you with technical questions.

Stav: použitý, Rok výroby: 1982, Funkcionalita: plne funkčný, číslo stroja/vozidla: D32L/7864, Číslo ponuky: D32L/7864 Druh stroja: Stroj na navíjanie pružín Info: repasovaný Značka: WAFIOS Typ: FUL8 Rok výroby: 1982/2000 Priemer drôtu: 2,0-9,0 mm Priemer pružiny: 10-120 mm Dĺžka vťahu: neobmedzená Gbedewi S Ekopfx Al Tsr Výkon - ks/min: 90 Umiestnenie: U nás na sklade

Stav: použitý, Rok výroby: 1996, Maximum core drilling diameter: 25 mm Drilling depth: 1000 mm Swing diameter: mm Total power requirement: 25 kW Machine weight: approx. 12.5 t Space requirements: approx. m T B T CNC-controlled horizontal "deep boring machine" Type: BWP 250 Year of manufacture: 1996, but mechanically and electrically overhauled in 2006 _____ Working area: • X-axis (drill slide column): approx. 2,000 mm • Z-axis (drill slide travel): approx. 1,200 mm • Drilling depth with 2 steadies: approx. 1,000 mm • Y-axis (drill slide vertical): approx. 1,100 mm Table clamping surface: 1,200 x 2,000 mm Drilling capacity - solid material: approx. Ø 4 - 25 mm Tool holder: HSK 50 Spindle speeds: 1,260 – 15,000 rpm Feeds/rapid traverse for Z/X/Y axes: • Infinitely variable: 100 – 10,000/15,000 mm/min Feed drive output: 27 Nm / 1,000 daN Spindle drive power: 7 kW Total drive: approx. 30 kW - 400 V - 50 Hz Weight: approx. 10,000 kg Accessories / Special equipment: • Ideal machine for complete machining of large workpieces, mold tools, and plates, etc., using deep hole drilling Ø 25 x 1,000 depth, milling up to Ø 65, slot milling up to Ø 30, spiral drilling / boring up to Ø 30, countersinking and thread cutting up to M24 x 3. • SIEMENS 840 D 4-axis CNC control system with process monitoring, etc. • GAMFIOR high-frequency drilling spindle with stepless spindle speeds. • Pneumatically applied (200 mm) drill bushing holder, 2-way swiveling. • Fixed 12-position tool changer by MIKSCH Type CTM 40 with 800 mm travel stroke for holding twist drills, milling cutters, and taps. The changeover from ELB deep hole drill bits to standard tools is manual. • The table is fixed, designed for heavy workpiece loads and precise drilling. • Mounted on the table: FIBRO CNC rotary table Type RTN 400 = 420x420 mm as B-axis. • For mounting on the table, there is a hydraulic FIBRO rotary table Ø 1,000 mm for divisions of 3 - 144 or angle increments 2.5 – 120° • Large coolant system approx. 11 kW pump with scraper belt chip conveyor and various filters. • 2 steadies for supporting deep hole drill shafts. • Complete work area enclosure with lateral and front access. Gsdpfet Hw Ayex Al Tsbr Condition: Very good – truly a rare opportunity, will soon be available for demonstration under power. Delivery: Ex stock here Payment: strictly net – upon receipt of invoice We look forward to your order. For further questions, we are at your disposal.

Stav: generálne opravený (použitý), Hĺbková vŕtačka, 2-vretenová, v prestavbe Godox E U S Eepfx Al Tebr Kompletne generálne opravená, po prestavbe ako nová. Technické údaje Vŕtacia technológia: systém ELB Počet vŕtacích vreten: 2 Minimálny priemer vŕtania: 1 mm Maximálny priemer vŕtania: 8 mm Maximálna hĺbka vŕtania: 300 mm Menovitý rozsah priemerov obrobkov: 5-30 mm

Rok výroby: 2013, stav: použitý, Technické detaily: Gbsdpfeixl Ahex Al Tjr Oběžný průměr: 80 mm Délka obrobku: 450 mm Hmotnost stroje přibližně: 3500 kg

Rok výroby: 2015, stav: pripravené na použitie (použité), Three identical Superfinish machines from Nagel are available, connected load: 11 kW, control system: SIEMENS SIMATIC HMI, length: 2,565 mm, width: 2,600 mm, height: 2,663 mm, operating hours: 34,051 h. Year of manufacture: 2 units from 2015, 1 unit from 2014. Documentation is included. Additionally, two Promot automation units are also available. Gjdpfx Alok S Ehke Tebr

Stav: použitý, ORT 3RP10 3-valcová závitovacia vretenová valcovačka Gedpfx Alozbx D No Tobr s invertorom (otáčky/min) Závitové valce na puzdrá pre lešenia, ťahové tyče pre regály. Elektronická renovácia alebo dodatočná výbava možná. Stroj je v našom sklade v Gussago BS, pod napätím, možnosť skúšobného chodu. Mimu Werkzeugmaschinen Taliansko. Valcovanie je mechanický proces bez trieskovej obrábania, ktorý sa môže vykonávať za studena alebo za tepla a ktorého cieľom je zlepšiť kvalitu povrchu (teda únavovej odolnosti), resp. vytvárať pevnejší závit než sústružením, vďaka vyššiemu stupňu za studena spevneného materiálu. Počet valcov: 3

Stav: dobrý (použitý), Rok výroby: 1998, NA PREDAJ: Závitovacia valcovačka ORT ITALIA RP 24 Gbsdpjy Shd Ijfx Al Tsr Presný stroj na tvarovanie závitov, ideálny pre vysoko výkonnú priemyselnú výrobu. Kapacita & Technika Lisovacia kapacita: 24 ton. Značka: ORT Italia. Model: RP 24. Rok výroby: 1998 Napájanie: 380V / 20A. Výbava Automatizácia: Integrované automatické podávanie. Ovládanie: Digitálny riadiaci pult. Odvod: Výstupný žľab v cene.