Stroj na tepelné tvarovanie blistrov

Uhlmann UPS1030ET

A pre-owned and overhauled blister packaging machine, model UPS1030 ET (94/125)

Technical Data:
- Format range:
Maximum feed width: 142 x 255 mm
Maximum forming depth: 10 mm
- Output minimum: 15 cycles/minute
- Output maximum: 70 cycles/minute with PVC
- Maximum output: 50 cycles/minute with aluminum

Includes:
- Forming film roll holder with two clamping shafts, for max. roll diameter 800 mm, electro-mechanically folding, including cutting and adhesive table, finished in neutral grey
- Continuous infeed of forming material with non-contact loop control
- Contact heating with 6 individually controlled heating zones (3 zones per plate)
- Forming station prepared for PVC or aluminum forming film with four-column guide system
- Electrical preparation for pore and crack detection (Visio-Scan)
- Clamping jaw for securing forming film at machine stop in the forming station
- Servo-driven feed after the forming station, compensates for film shrinkage
- Contact cooling with servo-driven feed
- Cooling water connection for upper and lower forming tools and lower sealing tool
- Deflection with balancing pendulum
- Filling section, approx. 1900 mm, with inclined brush and safety flap
- Electrical preparation for SimTap 2.i and feed-in with brush
- Sealing station for plate sealing and toggle lever drive, with four-column guide (reinforced version with calibration domes)
- Overload protection in the sealing station
- Upper sealing plate automatically retracts at machine stop
Dkedpor Ii R Uofx Agnju
- Lidding film holder mounted on the rear of the machine with two pneumatic clamping shafts, core diameter 76 mm
- Lidding film shoulder guide with pressure presence monitoring
- Stretching station for lidding film with touch probe-controlled stretching (print mark on the fly)
- Contact cooling station after the sealing station
- Feed before punching station
- Embossing station
- Perforation station
- Adjustable punching station including blister lowering
- Waste cutter with integrated feed for immediate cutting at the waste grid
- Compressed air monitoring
- Sliding door enclosure, safety doors electrically interlocked for emergency stop function (dual channel), made of plexiglass, with folding hood in the transfer area
- Switch cabinet, foldable at the rear of the machine, power supply 400/230 Volt, 3/N/PE 50 Hz with neutral and separate grounding
The stations have been completely overhauled and all discontinued parts were replaced during refurbishment.

- Schneider PacDrive3 system with Pac2Touch
- Machine paint finish RAL 9007

- Linear transfer device with:
o Lowering unit in the punching station
o Good blister discharge below the punch with guide rails
o Single vacuum transfer
o Individual rejection with ejection monitoring
o Collection belt with separate drive
o Transfer conveyor
o Good blister scraper for downstream machine stops
- CE conformity and declaration of conformity
- Two sets of operator manuals

Inzercia bola automaticky preložená a vyskytli sa nejaké chyby prekladu.