Skúšobná komora pre nárazové skúšky -80°C až +220°C

Vötsch VT 7012 S2

Stav: veľmi dobrý (použitý), Vötsch Type: VT 7012 S2 Air-cooled shock test chamber Dual-chamber design Hot Chamber: Temperature control range for the hot chamber: +50°C to +220°C Temperature deviation over time at center of usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate (heating): 11 K/min Cold Chamber: Temperature control range for the cold chamber: -80°C to +70°C Temperature deviation over time at center of usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate Heating: 2 K/min Kdjdpjwxc I Uefx Ab Seg Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions: width 470 mm, depth 650 mm, height 410 mm Overall dimensions: width 930 mm, depth 2115 mm, height 1970+ mm Port diameter: ∅ 67 mm Voltage: 3/N/PE AC 400V +10% 50HZ Rated output: 10 kW Rated current: 25 A Refrigerant: R452-A / R23 Weight: 1000 kg For your security as a buyer, please note the following information! The following procedures are performed in advance on all chambers we offer: 1. Function check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Technical data may be subject to change and errors excepted!) Please feel free to contact us by phone for further questions.

Stav: ako nová (výstavný stroj), Rok výroby: 2013, prevádzkové hodiny: 1 265 h, Funkcionalita: plne funkčný, maximálna rýchlosť vretena: 20 000 ot./min, sústružnícky priemer: 4 mm, Výbava: dokumentácia / manuál, otáčky plynule nastaviteľné, Automatický sústruh Citizen série R určený na obrábanie malých priemerov. Stroj bol veľmi málo používaný (vyrobených iba 15 800 kusov). Rok výroby: 2013. Súčasťou je podávač tyčí ASP-04. DPH nie je potrebné platiť pri predaji mimo Turecka. Kdsdpfx Aovtancjb Sjg

Stav: veľmi dobrý (použitý), Here we offer a Vötsch shock test chamber. Temperature shock test cabinet, water-cooled Two-chamber design Hot chamber: The temperature range of the hot chamber is from +50°C to +220°C Temporal temperature deviation (in center of usable space): ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 11 K/min Cold chamber: The temperature range of the cold chamber is from -80°C to +70°C Temporal temperature deviation (in center of usable space): ±1 K Spatial temperature deviation: ±2 K Temperature change rates: Heating: 2 K/min Cooling: 3 K/min Test room volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test room dimensions: width 470 mm, depth 650 mm, height 410 mm External dimensions: width 930 mm, depth 2115 mm, height 1970 mm Feedthrough: ∅ 67 mm Rated power: 10 kW Rated current: 25 A Voltage: 3/N/PE AC 400V ±10% 50Hz Refrigerant: R404A / R23 Weight: 1000 kg Important information for your safety as a buyer! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are put through a test run monitored with calibrated equipment. Kdsdjn Arc Aspfx Ab Sog Type: VT 7012 S2 Condition: used Scope of delivery: (see photo) (Specifications and technical data are subject to change and errors!) We are happy to answer further questions by phone.

Stav: veľmi dobrý (použitý), Vötsch Typ: VT 7012 S2 Water-cooled Two-chamber design Hot chamber: The temperature range of the hot chamber is from +50°C to +220°C Temporal temperature deviation in the center of the usable space: ± 1 K Kedex Hhfhjpfx Ab Sodg Spatial temperature deviation: ± 2 K Temperature change rate: Heating: 11 K/min Cold chamber: The temperature range of the cold chamber is from -74.5°C to +70°C Temporal temperature deviation in the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range (hot chamber): +50°C to +220°C Temperature range (cold chamber): -80°C to +70°C Test chamber dimensions: width 470 mm x depth 650 mm x height 410 mm External dimensions: width 930 mm x depth 2115 mm x height 1970+ mm Port diameter: ∅ 67 mm Voltage: 3/N/PE AC 400V +6/-10% 50Hz Rated power: 10 kW Rated current: 25 A Refrigerants: R-452A / R-23 Weight: 1000 kg Important information for your security as a buyer: The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) If you have any further questions, we are happy to answer them by phone.

Stav: veľmi dobrý (použitý), Rok výroby: 2021, INDEX MS22-8 Rok výroby: 2021 (Uvedený do prevádzky v roku 2022) Dvojitá riadiaca jednotka NCU 2 synchronizované hlavné vretená Automatický podávač tyčí MBL, dĺžka 3,3 metra Kjdpfx Abswt Unvo Sjdg Odhadovaný počet hodín prevádzky: 10 000 Pre kompletnú technickú špecifikáciu nás prosím kontaktujte.

Stav: veľmi dobrý (použitý), Vötsch Model: VT 7012 S2 Water-cooled Hot chamber: Temperature range for the hot chamber: +50°C to +220°C Temporal temperature deviation at the center of usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate Heating: 11 K/min Cold chamber: Temperature range for the cold chamber: -80°C to +70°C Temporal temperature deviation at the center of usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions: width 470 mm, depth 650 mm, height 410 mm External dimensions: width 930 mm, depth 2115 mm, height 1970+ mm Port diameter: 67 mm Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 10 kW Rated current: 25 A Refrigerants: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information! The following procedures are carried out on all chambers we offer prior to sale: 1. Functional inspection and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Kdjdpfx Aex E Tkaob Ssg Scope of delivery: (see photo) (Specifications and technical data are subject to change and error!) For further questions, please feel free to contact us by phone.

Rok výroby: 2000, prevádzkové hodiny: 104 382 h, Stav: veľmi dobrý (použitý), Vötsch Shock Test Chamber VT 7012 S2 System for Extreme Temperature Changes The temperature shock test examines the resistance of components, devices, and other products to rapid ambient temperature changes. Test specimens undergo quick temperature changes in air, with alternating high and low temperature loads. These cyclical loads and accelerated aging caused by temperature swings can reveal weaknesses in the test item. Kdsdpfx Abex Exmto Sog • Vertical arrangement of test chambers • Ball screw drive for safe guidance of the carrier basket • Carrier basket load capacity: 50 kg (VT3 7012 S2) • All-round mesh in the carrier basket secures test specimens • High recirculating air rate, short temperature change times, and uniform temperature distribution in the test chamber • Hot chamber can be used as a temperature storage unit; cold chamber can be used as a temperature cycling unit • Minimal energy consumption • No compressed air required Manufacturer: Vötsch Model: VT 7012 S2 Type: Temperature Shock Test Chamber Test chamber volume: 120 l Rated voltage: 400 V Rated power: 10 kW Rated current: 25 A Refrigerant: R452A Cooling unit: water-cooled Shock cooling (liquid nitrogen): via customer's nitrogen supply External Dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test Chamber Dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Control panel: IP 20 Control cabinet: IP 54 Key Parameters for Temperature Testing in Single-Chamber Operation: Temperature Range Hot chamber: +50°C to +220°C Cold chamber: –70°C to +70°C Temporal temperature deviation: ±2 K (at steady-state) Spatial temperature deviation: ±2 K (at steady-state in carrier basket) Heating rate (hot chamber): 11 K/min Cooling rate (cold chamber): K/min Heating rate (cold chamber): 2 K/min Cooling rate (hot chamber): K/min Inspection window: 355 x 355 mm Cable port: 67 mm Year of manufacture: 2000 Operating hours: 104,382 Weight: 1000 kg More items – new and used – available in our shop! International shipping costs on request!

Stav: veľmi dobrý (použitý), Heraeus Vötsch Climate Test Chamber We offer here a Heraeus Vötsch climate test chamber. Heraeus Vötsch climate test chamber with humidity control (water-cooled) Test chamber dimensions: Width 800 mm x Depth 800 mm x Height 950 mm Kjdpfx Aomt Du Teb Ssdg Housing dimensions: Width 1090 mm x Depth 1960 mm x Height 1995 mm Specifications for temperature tests: Temperature range: -45°C to +180°C time deviation: ± 0.1 to ± 0.5 K spatial deviation: ± 0.5 to ± 1.5 K Temperature change rate according to IEC 60068-3-5 Heating: 4.0 K/min Cooling: 3.0 K/min Specifications for climatic tests: Temperature range: -45°C to +180°C Temperature deviation at steady state, according to IEC 60068-3-5 Dependent on chamber temperature Temperature range: -10°C to +95°C time deviation: ± 0.1 to ± 0.3 K spatial deviation: ± 0.5 to ± 1.0 K Humidity range: 10% to 98% r.H. Humidity deviation, temporal: +1 to ±3 Electrical connection: Rated voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 7.8 kW Rated current: 15.0 A Refrigerant: R452A Chamber volume: approx. 600 liters Weight: approx. 620 kg net Type: VC³ 4060 Important safety information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Technical data and specifications subject to change and error!) If you have further questions, please feel free to contact us by phone.

Stav: použitý, CNC 3+2 Axis Vertical Machining Center DECKEL MAHO Type DMU 35 M CNC Control SIEMENS 810D with ShopMill Serial No. 11065353554 Year of manufacture: 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-Axis: 360° Swivel range: +105° / -15° Universal swivel rotary table: 400 x 290 mm, Centering bore 30H6 Table load: max. 100 kg Distance spindle nose – table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input increment: 0.01 mm Total power requirement: 15 kVA Speed range – main spindle: 20 - 6,300 rpm Spindle drive power: 6.3 / 10 kW (100% / 40% duty cycle) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull stud: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power supply: 400 Volt, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC Control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3 axes controlled (X, Y, and Z axes) - Manual swivel rotary table, C-axis = table rotation 360°, B-axis = swivel range +105°/-15° - Direct path measuring system for all 5 axes - Electronic handwheel - Spindle drive via servo motor with toothed belt and 2-speed gearbox - Full enclosure with sliding door - Swiveling control panel - Coolant nozzles at the vertical head - Chip tray with coolant tank and coolant pump - Work area lighting - Documentation available Space requirement (L x W x H): 2000 x 2000 x 2100 mm Weight: 1750 kg Good condition Kdjdpfxovt D D Uo Ab Sog

Stav: pripravené na použitie (použité), Rok výroby: 2017, Hlavný pohon Počet osí: 5 Otáčky vretena: 15 000 ot./min Výkon motora vretena: 46 kW Uchytenie nástroja: SK 40 Pohyb Pohyb v osi X: 2 600 mm Pohyb v osi Z: 900 mm Pohyb v osi Y: 1 100 mm Ovládacia jednotka Značka: SIEMENS Kodpfxjx D Icls Ab Ssdg Model: 840D sl Toto 5-osové univerzálne obrábacie centrum DMG DECKEL MAHO DMF 260-11 bolo vyrobené v roku 2017. Univerzálne obrábacie centrum s pojazdným stojanom, lineárnym pohonom osi X s rýchlosťou 80 m/min a rýchlosťou motorového vretena až 15 000 min-1. Stroj je vybavený naklápacou hlavou, zásobníkom na 30 nástrojov a pevným stolom s rozmermi 3 200 x 1 100 mm. Využite príležitosť kúpiť toto univerzálne obrábacie centrum DMG DECKEL MAHO DMF 260-11. Kontaktujte nás pre viac informácií o stroji. Typy aplikácií Frézovanie