Nástroj na frézovanie okien

VIVALDI Ø 207 x 75 mm

Stav: použitý, Slotting spindle 1 pc. Number of milling units 5 pcs. Spindle diameter 50 mm Control Weinig, PC-Nexus # 2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and fully checked before delivery ----- Technical Data Summary (Any additionally included accessories upon request) Pos. 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment pneumatically controlled in 8 positions, e.g. for top edge rounding > Laser guide light for identifying the saw section Pos. 2: Horizontal rounding unit, below ----- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool swing diameter: 130 mm > Axial adjustment mechanically coupled with cross-cut saw > Radial adjustment pneumatically controlled on/off NC-controlled length stop ----- > Length: 3,500 mm > Electronic length stop Pos. 3: Tenoning and slotting spindle ----- > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Spindle stroke, vertical: variable 254 mm, continuously adjustable, NC-controlled > Spindle speed: 3,500 rpm > Max. tool swing diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 4: 1st profiling spindle (climb and conventional milling) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 7.5 kW Pos. 5: 2nd profiling spindle ----- > Position: vertical right Fodpfevu Hghjx Afmsft > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Spindle stroke, vertical: variable 254 mm, continuously adjustable, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash bar guide consisting of: Guide rail in the stop (area of the climb milling spindle), Sash support bar from above in the area of the vertical profiling unit on the right and profiling spindle. Pos. 6: Horizontal profiling unit, above ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool swing diameter: 130 mm > Axial adjustment: 30 mm, 8 positions > Radial adjustment: 125 mm, 8 positions Pos. 7: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions > Radial adjustment: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool swing diameter: 210 mm > Motor power: 3.0 kW Pos. 8: Profiling/grooving unit from below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Stav: použitý, Brúska na hrany, hránová brúska, brúska Ffsdpfx Aecmh H Iefmot - Výška brúsenia: 75 mm - Vzdialenosť medzi vodiacimi kladkami: 700 mm - Brúsna dĺžka (topánky): 390 mm - Rozmery: 780/300/výška 520 mm - Hmotnosť: 40 kg

Stav: dobrý (použitý), Drážkovacie kotúče, frézovacie náradie na okná, vymeniteľné rezné doštičky, náradie na výrobu okien - Drážkovacie kotúče, frézovacie náradie vhodné pre: drevené okná Ffjdpfjb A Np Nox Afmet - Dufix: č./variant 46616 - Upínanie: Ø 50 mm - Hmotnosť: 6,8 kg

Stav: použitý, Mörtiková a drážkovacia fréza, fréza na ozuby a drážky, stroj na výrobu čapov a drážok, drážkovací rotor, stroj na čapovanie a drážkovanie, frézka na čapy a drážky - Výrobca: Festo, stroj na frézovanie čapov a drážok Fjdpfx Afof D H E Njmsft - Typ: ZA 101/S - Technické údaje: viď typový štítok/fotografie - Rozmery: 1675/1545/V1330 mm - Hmotnosť: 546 kg

Stav: veľmi dobrý (použitý), Tenon and Mortise Machine WEINIG Type 51 Swiveling studio window device with digital angle display Roller table with automatic feed, 6 m/min. Roller table length approx. 2,100 mm Pneumatic workpiece clamping automatic counter wood changer Fedpsv Tb Hgjfx Afmeft Cross-cut saw Pneumatically indexed 4-way turret Motor approx. 3 kW / 380 / 400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Mortising spindle Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380 / 400 V / 50 Hz Spindle speed 3,000 rpm Max. tool diameter 320 mm Length stop system Machine incl. tooling Installation dimensions L x W approx. = 2,700 x 2,800 mm Weight approx. 2,000 kg Note for used machines: • Subject to technical changes and prior sale. • Prices are ex location – free loaded onto truck! • Machines have been cleaned and function tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect the machines at their location. • Special agreements are only valid in written form. (We only answer inquiries with your address and phone number!)

Stav: veľmi dobrý (použitý), Rok výroby: 2007, Funkcionalita: plne funkčný, Rámový lis CMB SFR 4500×200 Pracovná dĺžka: 4500 mm Pracovná šírka: 200 mm Pracovná výška: 1200 mm Počet vertikálnych prítlačiek: 9 Počet čelných prítlačiek: 4 Prevádzkový tlak: 250 bar Motor hydraulického čerpadla: 1,5 kW Fsdpfxov Scz Aj Afmoft Hmotnosť: cca 2500 kg

Stav: dobrý (použitý), Zlaté / Stehle / Fantacci / Leitz Okenní nářadí pro dřevěná okna použité různé typy, na vyžádání Ffedpoixtudjfx Afmst

Stav: nový, Kód: N0015 Značka: RESCO Model: TENONE Ffjdped Ezquofx Afmet Nástroje pre čapovaciu frézku 4 ks skupín, priemer 300 mm, Z=4, F.50

Stav: použitý, Slot spindle 1 unit Number of milling units: 4 Spindle diameter: 50 mm # 2809 Weinig Unicontrol 6 ----- Technical Data Overview (Please inquire about any additional included accessories) Pos. 1: Crosscut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for identification of saw cut section CNC-Controlled Length Stop ----- > Length: 3500 mm > Electronic length stop including positioned crosscut saw Pos. 2: Tenoning and Slotting Spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thickness 68 - 92 mm > Spindle speed: 3000 rpm > Max. cutter circle: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 360 mm > Motor power: 11 kW Pos. 3: 1st Profiling Spindle (Climb & Conventional Cut) ----- > Position: Vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. cutter circle: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling Spindle ----- > Position: Vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thickness 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. cutter circle: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for the processing of narrow, short parts (e.g., glazing bars) Sash bar guide consisting of: Sash bar support rail from above, located in the area of the vertical right profiling unit and profiling spindle Pos. 5: Horizontal Top Profiling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. cutter circle: 130 mm > Axial adjustment: 30 mm, 2 positions > Radial adjustment: 125 mm, 4 positions, manual Pos. 6: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: Vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions via pneumatic turret > Radial adjustment: 110 mm, 8 positions via pneumatic turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Max. cutter circle: 210 mm > Motor power: 3.0 kW Additional features ----- > Electric feed height adjustment incl. mechanical digital display and manual feed rail clamping > Scribing device for splinter-free rebating > Twin part package > Return conveyor for one-man operation: swivel belt > Screen-based control Fsdpjxtvgkofx Afmeft > Angled window device > Electronic angle display for angled windows > Industrial PC with Windows PC control/NEXUS Extraction connection diameters: ----- Crosscut saw: 80 mm Slot spindle: 140 mm Profile spindle 1: 140 mm Profile spindle 2: 140 mm Grooving unit: ...

Stav: veľmi dobrý (použitý), Rok výroby: 1984, Olejohydraulický rámový lis Fodpsv Im Hnofx Afmjft Typ Hydro Rok výroby 1984, 1,1 kW Hmotnosť približne 1500 kg 3 vertikálne a 2 horizontálne nosníky Lisovací rozmer 4000 x 2550 mm Rozmery rámu 4900 x 800 x 2500 mm Rozmery upínacieho nosníka 2850 x 800 x 500 mm