Skriňová dodávka

VW Crafter 35 TDI DSG LBW+ KAMERA+ LED+ ACC 4763

Stav: generálne opravený (použitý), Rok výroby: 2026, Funkcionalita: plne funkčný, otvor vretena: 120 mm, sústružnícky priemer: 1 550 mm, sústružnícky priemer nad lôžkom suportu: 1 550 mm, priemer sústruženia nad horným suportom: 1 220 mm, dĺžka sústruženia: 6 000 mm, celková dĺžka: 8 500 mm, celková šírka: 1 600 mm, celková výška: 1 600 mm, hmotnosť obrobku (max.): 15 000 kg, držiak vretena: MK 6, The PORĘBA TR-155B2/6M universal lathe has been comprehensively rebuilt and modernized by us. It features technical specifications consistent with the technical and operational documentation of a new machine, complies with the technical acceptance criteria of WOT and Polish standards, and also fulfills EU requirements. The machine is supplied with a full 12-month warranty covering spare parts and electrical components. Availability: General overhaul on order, lead time 3.5 months from order confirmation. Technical data: - Distance between centers / turning length: 6,000 mm - Swing over bed: 1,550 mm - Swing over cross slide: 1,220 mm - Swing in gap: 1,880 mm - Spindle bore diameter: 120 mm - Max. workpiece weight between centers: 9,000 kg - Max. workpiece weight between centers + 1 steady rest: 12,000 kg - Max. workpiece weight between centers + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 Klsdpfov Ab Dqox Af Rjp - Speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st / 2nd gear) - Overall dimensions: Total length: 8,500 mm Width: 2,130 mm Height: 1,550 mm - Total weight: 14,100 kg Standard equipment: Tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and versions - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change toolpost - Full-length rear protection guard - Inverter incl. soft-start function and potentiometer for stepless speed control

Rok výroby: 2005, stav: dobrý (použitý), číslo stroja/vozidla: C9 15840, Profilová kefovacia/brúska Tagliabue LB 2 Model: LB 2 Kjdpfx Aeg Rn Iaof Relp TECHNICKÉ ÚDAJE: Rok výroby: 2005 Obojstranná brúska na hrany Tagliabue so 4 oscilačnými brúsnymi jednotkami. Dva vertikálne valce a dva vnútorné priečne valce na priečne kefovanie.

Stav: veľmi dobrý (použitý), Motor-driven NC rotary table Stepless rotary table (indexing increments: 0.001°) Attached pallet station: pallet changer table (2 pallets) Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Total height: 660 mm Centering bore: 100 H6 mm T-slots: 7 pcs Slot size: 22 H7 mm Slot spacing: 160 mm Position feedback via rotary encoder: ROD 250. Kjdpfx Afjfk R Tdo Relp Condition: Very good (used) Optionally available with machine base (travel = 2000 mm) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is on tool milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls, and CNC control upgrades. Services: - Used machines - Spare parts - Customer service - Machine maintenance - Machine overhauls - CNC control modernization

Rok výroby: 1999, stav: použitý, NOSNOSŤ 2000 kg Kjdpfx Ajwa I A Tof Rolp VÝŠKA 4,7 m a 5 m DĹŽKA RAMENA 3,2 m 2 KUSY

Stav: dielensky repasované (použité), Rok výroby: 2007, prevádzkové hodiny: 22 605 h, Funkcionalita: plne funkčný, lisovacia sila: 100 t, šírka plniaceho otvoru: 1 100 mm, dĺžka plniaceho otvoru: 1 600 mm, šírka balíka: 1 100 mm, výška balíka: 1 100 mm, hmotnosť balíka: 1 400 kg, vstupný prúd: 238 A, celková hmotnosť: 36 000 kg, kapacita olejovej nádrže: 1 300 l, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data - Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed chute dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connection rating: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk densities: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank volume: approx. 1,300 l PLC: Telemecanique TSX Micro Kjdjvf E Avopfx Af Rslp Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions, baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight (baler only): approx. 36 t Notes: The baler has been partially overhauled, serviced in our workshop, tested upon completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works were carried out: - Derusting and partial repainting of the baler - Hydraulic oil tank drained, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press lid cylinders, and press channel cylinder disassembled, inspected, honed, all seal kits renewed, and final pressure test performed - Pre-press lid with bearings and bearing housings dismantled. 1st and 3rd arc segments removed and newly welded - Both bearings of the pre-press lid shaft replaced - Upper material deflector on pre-press lid frame replaced - Press ram dismantled, checked, and both front rollers renewed - Material deflector and wear profiles on sides and bottom of press ram removed and newly welded - Horizontal and vertical needle and tying units dismantled, checked, plastic slide plates, driller shaft bearings, and wire guide pulleys in the needle heads replaced - Both brass slide rails on left and right cover of the press ram replaced - Both wire deflection units with bale retention clamps completely renewed - Wire inserting unit including hydraulic cylinder below needle guides completely renewed - Wire inlet grooves on floor and side walls of press channel welded and smoothed - General maintenance and service work carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored No liability is assumed for the technical data or possible mistakes.

Stav: veľmi dobrý (použitý), Rok výroby: 2002, max. šírka jumbo rolky 1300 mm Max. priemer jumbo rolky 1000 mm (1200 mm bez spájacieho stola) Max. priemer navíjania 600 mm Pracovná rýchlosť 300 m/min Možná šírka rezu od 20 mm Rok výroby 2002 Príslušenstvo: Kledpfxoxyihnj Af Rep - 1 odvíjacia upínacia hriadeľ Ø 76 mm - 2 frikčné navíjacie hriadele Ø 76 mm - 10 horných a dolných nožov - 1 vedenie hrany - 1 rezací stôl - 1 odsávacie zariadenie na okrajové prúžky - silikónované vodiace valce, vhodné na lepiacu pásku - s dokumentáciou

Rok výroby: 1992, stav: takmer ako nový (použitý), číslo stroja/vozidla: Div1, Technical Data: 1x Demag KBK 1 pillar jib crane, SWL 125kg with chain hoist Load capacity at full outreach: 125kg / 0.125t Height: approx. 3.5m Underside of jib: approx. 3m Outreach: approx. 4m Hook height: approx. 2.55m Total weight: approx. 450kg Supplied with steel or Demag chain hoist 125kg, depending on stock Incl. bolts, cable trolley, trolley, end cap, etc. Various cranes in stock Slewing range: 300°, connection to 400V 16A Crane is dismantled and available immediately Item location: 75053 Gondelsheim Further cranes available, lifting capacity 80–5000kg, please enquire See pictures Klsdpong H T Uefx Af Rep Dispatch via forwarding agent or collection only by prior arrangement

Rok výroby: 2015, stav: generálne opravený (použitý),

Stav: takmer ako nový (použitý), číslo stroja/vozidla: DCMS, Rok výroby: 2007, Demag manulift reťazový kladkostroj nosnosť: 125 kg výška zdvihu: 2,8 m prevod: 1/1 Kjdsg Stp Hepfx Af Rjlp rýchlosť zdvihu: plynulá 0,15 - 30 m/min vyhotovenie: vybavený závesným okom použitý vo veľmi dobrom stave (kompletne prekontrolovaný) (nová cena € 3353,-) K dispozícii viac DCMS kladkostrojov

Stav: vyžaduje opravu (použité), Funkcionalita: nefunkčný, Rok výroby: 2004, CNC Rohrbiegemaschine / CNC tube bending machine Manufacturer: Schwarze-Robitec Model/Type: CNC 80 E-MR Year of manufacture: 2004/2006 Condition: in need of repair CNC: CNC PC control Beckhoff Kljdpfx Afjxzubvs Rjp Technical data: - Maximum tube diameter x wall thickness: 80 mm x 3 mm - Minimum tube outside diameter: 16 mm - Minimum bending radius to tube center: 25 mm - Maximum bending radius to tube center: 240 + 50 mm - Maximum bending angle: 180° - Maximum tube lift length: 1000 mm - Bending direction: right - Weight of machine: 7000 kg - Total installed power: 39 kW - Voltage: 400 V / 50 Hz - Amperage: 100 A - Machine dimensions (L x W x H): 6.2 x 3.2 x 2 m Equipment / Accessories: - Hydraulic slide shoe pressure and slide feed - Automatic tube turning and reversing device - Electric mandrel bending device - Pneumatic mandrel rod safety feature - PC control Beckhoff - Automatic central block lubrication - Laser scanner, safety fence Machine needs repair: The planetary gearbox of the transport trolley is defective and must be replaced. According to the quotation, the cost of spare parts (excluding installation): - Planetary gearbox: 1,674 EUR - Gearbox flange: 1,850 EUR - Pinion: 850 EUR - Plus VAT The gearbox of the transport trolley is damaged and must be replaced. Costs for spare parts approx. (without installation): - Planetary gearbox: 1,674 EUR - Gearbox flange: 1,850 EUR - Pinion: 850 EUR Priced to sell in as-is condition. Immediate delivery, free loading onto truck.